ALBERT

Description: The production of green hydrogen in Germany is more competitive than expected compared to imports. This is the key finding of a meta-analysis conducted by the Wuppertal Institute on behalf of the North Rhine-Westphalia Association for Renewable Energies (Landesverband Erneuerbare Energien NRW). The hydrogen study focuses primarily on the year 2030 and beyond - and confirms the advantages of green hydrogen produced in Germany from domestic renewable energies, especially when the evaluation is viewed from a holistic system perspective.

Description: The food system faces a multitude of challenges, including high greenhouse gas emissions, threats to biodiversity, increased diet-related diseases due to unbalanced diets, and socially problematic complex supply chains. This requires not only a transformation of the agricultural economy but also a change in the diet and lifestyles of all consumers. Developing and using digital and technological innovations can help to solve these challenges. In this context, the study provides impulses on how digitalisation can contribute to transforming production and consumption and which prerequisites have to be given to achieve this. The study describes the approaches for digitalisation along the value chain. These include optimising the use of resources in agriculture - for example with the help of smart farming - and supporting consumers with digital tools and assistance systems - such as apps designed to support grocery shopping. In addition, new business models and a better connection between production and consumption processes are also possible. This includes, for example, new digital sales channels or tracking and communicating sustainability indicators such as CO2 emissions across all steps of the value chain in order to enable all stakeholders to take reliable action.

Description: 22 years are left until the German target for climate neutrality should be reached. For the industrial sector, this implies a fundamental change and an acceleration of emission reduction, as from 2000 to 2021 the sector has reduced its greenhouse gas (GHG) emissions by only 13% (ERK, 2022). For the large structures, plants and assets that are characteristic for the energy intensive industrial sectors, the timespan implies no room for delay. One sector facing particular challenges is the chemical industry. Here, fossil resources are used not only for energetic purposes but for feedstock as well, in the petrochemical industry in particular. The efforts made in the petrochemical sector thereby not only affects the sectors own emissions, but the chemicals value chain at large, including the management of end-of-life products. The dependency on energetic resources for material use also means that there is a particular connection from the chemical industry to the energy system at large, which also entails special consideration. The chemical industry also has a particular relevance to the Antwerp-Rotterdam-Rhine-Ruhr-Area (ARRRA) which hosts several large petrochemical clusters in Germany as well as the Netherlands and Belgium, with complexly interlinked production chains. In reaching the climate targets, these regions especially face significant changes and may have the opportunity to position themselves as frontrunners for industrial transformation. That is, if a successful strategy can be found. In the recent years, numerous scenario analyses and roadmaps have been released drawing out pathways for chemical industries to develop in line with national and international climate targets. This can entail mapping of technological options, important prerequisites, particular challenges as well as important opportunities and timeframes. This meta-analysis summarizes and compares the findings of some of the most recent previous works at the national, European and global level. As the goal is to investigate the various strategic options and development paths for Germany and the ARRRA, it has a particular focus on roadmaps for Germany, the Netherlands and Belgium. It takes a quantitative as well as qualitative approach, looking both at resource and production volumes, different emission reduction strategies relative importance, as well as policy recommendations and other important framework conditions. A particular focus is put on the use of non-fossil feedstocks to reduce emissions.

Description: Established in 2016, the German-Japanese Energy Transition Council (GJETC) strives to promote bilateral cooperation between Germany and Japan on energy transition. Among other studies and topical papers, an output paper in 2020 (Rauschen et al., 2020) already compared the energy efficiency in buildings in both countries with a particular focus on heating and cooling. One important finding of this output paper was that further efforts in the building sector are needed to improve the energy efficiency of buildings in Germany and Japan. Following the more ambitious climate protection targets in both countries, this study seeks to analyze the German and Japanese policies put in place to accelerate the decarbonization of the building sector. The decarbonization of the vast number of buildings that both Japan and Germany are facing will be a major contribution to achieving the GHG reduction targets of both countries and should continue to be discussed among experts and developed into a discussion among policy makers. This report examines and compares the characteristics of the building stock in both countries, as well as existing policies and new strategies and policies that are planned or discussed to achieve energy conservation and decarbonization of buildings. The current shape of buildings, especially houses, is greatly influenced by the land area of the country corresponding to the available space for buildings, the natural environment surrounding the country, the natural resources available, and the lifestyle and cultural ideas that have been passed down and taken root over time. Therefore, it might be difficult to compare them and the corresponding strategies and policies with the same yardstick, so we also discuss common or deviant situations. Through this joint research, we aim to find each other's advantages and challenges and to develop useful and concrete policy recommendations that will contribute to decarbonization policies in both countries.

Description: This case study examined the structural change in the Ruhr area caused by the low international competitiveness of German hard coal mining over the period from the late 1950s to 2015. It analysed the structural change process and the structural policies implemented as a reaction to this process with the objective to make this knowledge available for future structural change processes in other (coal) regions by deploying various qualitative and quantitative methods of empirical social and economic research. A discourse analysis helped to recognise who supported which structural policy approaches and why - and thus gives indications of the possible relevance of experiences for other regions.

Description: This study presents in detail: the use of plastic products and the opportunities for recyclate use in the construction sector, quantities of plastic used, take-back systems, recycling techniques, current recyclate use and plastic construction product packaging.Potentials for increasing high-quality recyclate use were identified. Existing hurdles and options for action for industry and politics are presented. Current recyclate use as well as its potential use are strongly dependent on the application area of plastics. The biggest hurdles for the use of recycled materials are product life time, dismantling and technical requirements.

Description: The idea for the Green Recovery Tracker was born in spring 2020 when governments started making announcements on economic Corona recovery measures. From a climate and resilience perspective it is key that those recovery packages, investments and subsidies are in line with long-term climate and sustainability targets. Thus, recovery packages should not only boost the economy in the short-term, but also strike the path to a just transition towards climate neutrality. Against this background, Wuppertal Institute and E3G have launched the Green Recovery Tracker project in late summer 2020 to shed light on the following questions: What can be considered an effective green recovery? What are good examples, which can be used as an inspiration for recovery programs aiming to support sustainable development? Where do the individual Member States stand with respect to aligning their recovery activities with the climate policy agenda? In this report, you will find our Methodology as well our Policy Briefing highlighting our key takeaways of our country and sectoral analyses. It further includes a section on "What can we learn from our experience with the Green Recovery Tracker?". The briefing concludes with a "Guidance for future funding programs and achieving climate targets overall".

Description: On the basis of a literature research, this subtask develops a conceptional framework for a common understanding of CE within the project team and for the following work packages and tasks. After a brief introduction into the objectives and the context of a circular economy, a more elaborated look into the necessity of an explicit understanding of CE, the objectives, the spatial perspective of CE and the specific challenges within the CICERONE context will be done, in order to develop a basis for a common understanding within the project context. Circular economy can and has to be understood as an (eco-)innovation agenda. Therefore, the paper investigates the role policy has to play to support innovation for a CE transition, for creating the framework conditions and why CE has also to be build from the ground up. Finally, the paper looks from two perspectives at emerging trends and business models in a CE to sketch next steps towards the transition in a selection of central sectors. Conclusions are drawn on the basis of the insights gained by the preceding chapters.

Description: The key objective of this deliverable is to gain insights on and assess how CE is being implemented and R&I is being funded at regional level, e.g., via the RIS3 strategy and Structural Funds. As such it sets the scope for the project and provides the background against which programmes and measures can be understood, assessed, developed and recommended in succinct tasks and work packages. The objective of this report is to provide a concise overview of the current R&I priorities, as expressed in running and newly introduced funding and legislative measures with respect to Circular Economy in European countries and regions.

Description: This paper analyses the potential of digital information technology to enable the reliable provision of product information along the plastics supply chain. The authors investigate the possible contribution of a product passport equipped with decentralised identifiers and verifiable credentials to overcome information deficits and information asymmetry in the circular plastics economy. Through this, high-quality plastics recycling could be enabled on a larger scale than currently possible.

Description: The challenges and also potentials of the energy transition are tremendous in Germany, as well as in Japan. Sometimes, structures of the old energy world need "creative destruction" to clear the way for innovations for a decarbonized, low-risk energy system. In these times of disruptive changes, a constructive and sometimes controversial dialog within leading industrial nation as Japan and Germany over the energy transition is even more important. The German-Japanese Energy Transition Council (GJETC) released a summarizing report for the first project phase 2016-2018. It includes jointly formulated recommendations for politics as well as a controversial dialogue part. The Council jointly states and recommends that: Ambitious long-term targets and strategies for a low-carbon energy system must be defined and ambitiously implemented; Germany and Japan as high technology countries need to take the leadership. Both countries will have to restructure their energy systems substantially until 2050 while maintaining their competitiveness and securing energy supply. Highest priority is given to the forced implementation of efficiency technologies and renewable energies, despite different views on nuclear energy. In both countries all relevant stakeholders - but above all the decision-makers on all levels of energy policy - need to increase their efforts for a successful implementation of the energy transition. Design of the electricity market needs more incentives for flexibility options and for the extensive expansion of variable power generation, alongside with strategies for cost reduction for electricity from photovoltaic and wind energy. The implementation gap of the energy efficiency needs to be closed by an innovative energy policy package to promote the principle of "Energy Efficiency First". Synergies and co-benefits of an enhanced energy and resource efficiency policy need to be realized. Co-existence of central infrastructure and the growing diversity of the activities for decentralization (citizens funding, energy cooperatives, establishment of public utility companies) should be supported. Scientific cooperation can be intensified by a joint working group for scenarios and by the establishment of an academic exchange program.

Description: The German-Japanese Energy Transition Council (GJETC) was established in 2016 by experts from research institutions, energy policy think tanks, and practitioners in Germany and Japan. The objectives and main activities of the Council and the supporting secretariats are to identify and analyze current and future issues regarding policy frameworks, markets, infrastructure, and technological developments in the energy transition, and to hold Council meetings to exchange ideas and propose better policies and strategies. In its second project phase (2018-2020), the GJETC had six members from academia on the Japanese side, and eight members on the German side, with one Co-Chair from each country. From October 2018 to March 2020, the GJETC worked on and debated six topics: 1) Digitalization and the energy transition. 2) Hydrogen society. 3) Review of German and Japanese long-term energy scenarios and their evaluation mechanism. 4) Buildings, energy efficiency, heating/cooling. 5) Integration costs of renewable energies. 6) Transport and sector coupling. The outputs and the recommendations of the second phase of the GJETC are summarized in this report.

Description: In the coming years, we must set a course that will allow as to protect our climate, reduce resource consumption, and preserve biodiversity. A profound ecological system change is on the horizon in all central areas of action of the economy and society, or transformation arenas. Digitalisation is a prerequisite for the success in this change and will impact these arenas at multiple levels: Digital technologies and applications will make it possible to improve current procedures, processes, and structures (Improve) and help us take the first steps towards new business models and frameworks (Convert). Despite this, digitalisation itself must be effective enough to facilitate a complete ecological restructuring of our society and lives to achieve more far-reaching economic transformation and value creation (Transform). The ability to obtain, link, and use data is a basic prerequisite for tapping into the potential of digitisation for sustainability transformation. However, data is not a homogeneous raw material. Data only gains value when we know the context in which it was collected and when we can use it for a specific purpose. The discussion on what structures and prerequisites are necessary for the system-changing use of data has only just begun. This study was conducted to serve as a starting point for this discussion as it describes the opportunities and prerequisites for a data-based sustainability transformation. This study focuses on environmental data, data from plants, machines, infrastructure, and IoT products. Our task will be to increase the use this data for systemic solutions (system innovation) within transformation arenas where different stakeholders are working together to initiate infrastructure, value chain, and business model transformation.

Description: The first step of complete transformation will be utilizing digital technologies and applications to improve current procedures, processes, and structures (Improve). Next, complete digitalisation will pave the way for new business models and framework conditions (Convert). Finally, comprehensive transformation of the economy and value creation will ensure the effective reorientation of society and lifestyles towards sustainability (Transform). This last step is critical for a successful ecological transformation, or a "green transformation", must be placed front and centre during international debate. Through this report, we aim to highlight and discuss the opportunities that digitalisation can bring to Germany. In particular, we will discuss three exemplary areas of ecological transformation where action is necessary: 1) A digital and circular economy that uses data to increase resource efficiency. 2) Intelligent, sustainable mobility that connects us in eco-friendly ways. 3) Transparent transitions towards sustainable food chains and agriculture. This report represents the first phase of the Shaping Digital Transformation project. In this report, we will outline the framework of our project to create a starting point for further debates.

Description: Given that over 50% of Myanmar's urban inhabitants and nearly 75% of the rural population lack access to adequate electricity, the country's development agenda includes electrification as a key policy goal. The government's National Electrification Project (NEP) aims to reach 100% household electrification by 2030. To achieve this ambitious target, the government of Myanmar has established a set of strategic electrification priorities. The primary focus is to electrify the country through extension of the national grid and construction of large power plants based on fossil fuels and renewable energy. For decades, decentralised energy solutions have played a niche role in Myanmar's electrification journey. Local developers have constructed thousands of nominal "mini-grids", powered by a range of sources, including water, diesel, and solar. With the support of local communities, these initiatives provide positive stimuli for the social and economic development of villages across the country. To achieve its electrification goals, the NEP includes a segment to promote the development of new mini-grids through a set of subsidies and private sector cooperation initiatives. These target remote regions, which are difficult to electrify through extension of the main grid. This report takes an in-depth look at decentralised electrification through community-based mini-grids with a focus on renewable energy. The aim is to provide insights into the potential role of sustainable electrification and to identify both enabling and limiting factors related to the institutional and policy landscape (macro), as well as the local conditions (micro). It also aims to explore whether the cooperative model is a suitable organisational framework for the operation of mini-grids in Myanmar. The results of the study will help to inform policymakers and supporters of decentralised electrification about the potential role for cooperatives and provide ways to improve the operating environment for sustainable, community-based mini-grids.

Description: The Wuppertal Institute conducted an impact analysis of the NRW Sustainability Bond #4 of 2018 on behalf of the State Government of North Rhine-Westphalia (NRW). The most recent bond has a volume of EUR 2.025bn, a term of 10 years and consists of 52 eligible projects from the State's 2017 general budget (sustainable value-added was confirmed in a second party opinion by oekom research1). This report analyses the contribution of the bond to climate mitigation, sustainable land use and social impacts. It also includes information on the impacts of the previous three bonds (NRW Sustainability Bond #1 to #3).

Description: The Wuppertal Institute conducted an impact analysis of the NRW sustainability bond #5 of 2019 on behalf of the State government of North Rhine-Westphalia (NRW). The most recent bond has a volume of EUR 2.25 bn, a term of 15 years and consists of 52 eligible projects from the State's 2018 general budget (sustainable value-added was confirmed in a second party opinion by ISS-oekom). This report analyses the contribution of the bond to climate mitigation, sustainable land use and social impacts. It also includes information on the impacts of the previous four bonds (NRW sustainability bond #1 to #4).

Description: In the context of the German-Korean Energy Policy Dialogue, integration of renewable power sources and smart grids have been identified as topics with high relevance. This study aims to support mutual learning and exploration of new fields for collaboration by identifying similarities and differences in the respective status quos, strategies and policies in both countries. After a short introduction to the South Korean energy situation, Chapter 2 provides an overview of the South Korean power market, its situation regarding renewable power sources and the Korean definition of smart grids. Chapter 3 of this study highlights the major South Korean energy strategies and regulatory frameworks relevant to integration of renewable energies and smart grids. In Chapter 4, the status and perspectives of renewable energy sources integration and smart grids in South Korea are discussed, presenting various demonstrative examples, new business models and the current situation of technology deployment. Chapter 5 puts South Korea in the global context and compares it to Germany. Finally, Chapter 6 draws conclusions and presents recommendations on suitable areas for mutual learning.

Description: To minimize the impact of end-of life vehicles on the environment they have to be managed in accordance with the legal requirements. Against this background it is important to comprehend the whereabouts of permanently decommissioned passenger cars. From the available statistical sources it was only possible to account for the whereabouts in parts for the last years. The subject-matter of the research project was the closure of this "statistical gap" to the maximum extent possible. The objectives of the project were the identification of the possible reasons underlying the "statistical gap", the determination, itemisation and, to the maximum extent possible, quantification of information on the actual whereabouts of permanently decommissioned vehicles and the development of measures and instruments that can be used to permanently improve the data situation.

Description: The brochure summarises the project's objectives and methodological approach, its key findings as well as conclusions. Both case studies have shown that technological solutions for low carbon development should be embedded in a well-developed institutional framework to foster their deployment and implementation. Therefore, recommendations for Wuxi include examples of innovative and integrated technical projects for increasing energy and resource efficiency, combining them with recommendations for the development of institutional frameworks. One element of such a framework could be a local energy agency in Wuxi, which would offer support and expertise to potential investors in low carbon technologies. Also for the German pilot region, the brochure offers concrete recommendations how to facilitate low carbon planning within the region.

Description: The maritime part of all transport via the port of Rotterdam is linked to the brunt of all CO2 emissions (87 %) the port can potentially influence. This report aims to quantitatively grasp the maritime transport of the Port of Rotterdam, in terms of ships, total tonnages, energy consumption and CO2 emissions in respect to types of cargo and regions. In the first and broad part of the report, the emissions and energy demands of sailing ships are assessed. Emissions and energy demand for the port itself are subject of a separate part at the end.

Description: In spite of current multiple political crises, global warming will remain a prime issue on the global agenda. The adoption of the Paris Agreement in 2015 and its quick ratification in 2016 have created a strong momentum for worldwide action against climate change. As global greenhouse gas emissions must decline towards levels close to zero by the middle of the century, the rapid decarbonisation of energy systems is high on the agenda of most countries around the globe. This publication delivers insights into cutting edge research on the necessary transitions towards low carbon societies and by this aims to contribute to international as well as national policymaking. The topics covered in more than 20 concise original articles are among the most important issues for progressing solutions for climate change and sustainable development. The papers discuss recent findings and case studies in the following subject areas: Governance of the necessary long-term transitions in the context of potential known and unknown adverse developments; Policy instruments and strategies that allow for financing the transition to low carbon economies and, at the same time, respond to today's economic and social challenges; Integrated strategies for three of the most important arenas of global decarbonisation: Cities, as much of the change and necessary investment for low carbon societies must take place, be planned, be financed and be built in cities; industry, particularly the energy-intensive processing industries, which are at the core of society's metabolism and are responsible for a large and growing share of global emissions and science as a whole, which must become more solutions-oriented because the transitions needed will rely heavily on research providing solutions for technological as well as societal problems. As a contribution to these great challenges and at the request of the G7 Environment Ministers, the Low Carbon Society Research Network (LCS-RNet) acts as a forum aimed at fostering research and policymaking to jointly achieve decarbonised energy systems in countries around the world. It convenes leading scientists, practitioners and policymakers and aims at supporting governments in proceeding jointly towards the design and implementation of climate-friendly low carbon societies.

Description: The Greens / European Free Alliance Group of the European Parliament contracted Wuppertal Institute in collaboration with Energiaklub to develop scientifically sound, comprehensive, alternative, and sustainable long term energy scenarios for Hungary, which cover potential development paths till 2030 and 2050. The scenarios developed deliver information about the costs and long-term effects of different energy choices for Hungary as well as credible information on potential benefits of greening the energy mix. As a result, the study aims to provide policy makers with better evidence for making informed, prudent and forward-thinking decisions in this field.

Description: The current utilisation of natural resources in Germany and Europe is not sustainable, as inter alia stated by the German government as well as by the European Commission. At the same time, increased resource efficiency could lead to various environmental but also economic benefits. This brief study commissioned by Changing Markets presents developments in the field of resource efficiency policies, analyses the status quo of resource consumption with a special focus on fast moving consumer goods and describes potential effects of resource conservations.

Description: How can renewable energy sources be efficiently integrated into the North African electricity systems? By using techno-economic modeling methods, this book explores optimized electricity system expansion pathways until the year 2030 for the five North African countries - Morocco, Algeria, Tunisia, Libya and Egypt. The results indicate that renewable energy integration is actually a viable business case for the entire region, if wind and solar capacities are properly planned in conjunction with the conventional generation system and under consideration of the country-specific electricity supply-/demand patterns. Further aspects featured in this publication are the impact of renewable power on the transnational electricity transmission system and the question how decision making processes about renewable energy strategies can be improved in the North African context. The book is a contribution to the scientific literature about energy issues in the Middle East and North Africa (MENA), but also seeks to address political and industrial practitioners concerned with the development of the region's renewable energy future.

Description: Considering global warming, increasing commodity prices, and the dramatic consequences of the over-exploitation and overuse of resources, a transition to a renewable energy supply is necessary. This requires an (resource) efficient and renewable supply of operating reserve. In this article, a possible solution to this problem is analysed: the Desertec concept. It is meant to convert solar energy in areas with high solar irradiation into electrical energy by means of Concentrated Solar Power (CSP) transferring this energy by High Voltage Direct Current (HVDC) lines into the whole European Union Middle East and North Africa (EU-MENA) area. In order to assess the resource efficiency potential of Desertec, three different kinds of CSP plants (parabolic trough, Fresnel collector and central receiver of the building classes Inditep, Novatec and Solar Tres) including heat storage systems (Molten Salt and Phase-Changing-Material) and the necessary HVDC are analysed using the Material Input per Service Unit (MIPS) methodology. The assessment is accomplished for three different locations (Morocco, Tunisia and Egypt) and two points of time (2025 and 2050). With these results, a scenario of electricity supply in Germany in 2050 with a 20% share of solar power import is calculated. Central receivers are the most resource efficient ones: their consumption of abiotic materials is only half of parabolic trough plants and two thirds of Fresnel trough plants. Water and air consumption is the lowest of all analyzed CSP plants as well. The scenario for Germany's fuel mix in 2050 shows that a predominantly renewable fuel mix reduces the consumption of abiotic materials by 75%, of water by 60% and of air by 45%. Only the consumption of biotic materials rises due to the higher share of biomass conversion.

Description: Multinational mining companies operating in Latin America increasingly publish sustainability reports which outline their contributions to sustainable development. Companies argue that reports help communities better understand the importance of the benefits created by mining. However, we argue that sustainabilityreporting can only play a role in improving a company's performance and reputation if the quality of the reported data is good enough to answer community-raised contentious issues and if such are tackled through a stakeholder engagement process which includes "anti-mining" groups. The paper examines a miningconflict in Argentina's Bajo de la Alumbrera open pit mine. The assessment is based on a content analysis of Alumbrera's Sustainability Report (SR), primarily from 2009, complemented with insights from the 2010 and 2011 reports. The study reveals that environmental and economic indicators are the most contentious and least reported. The reports examined only briefly acknowledge these issues, and fail to detail the procedures followed to identify and engage stakeholders.

Description: Managing solid waste is one of the biggest challenges in urban areas around the world. Technologically advanced economies generate vast amounts of organic waste materials, many of which are disposed to landfills. In the future, efficient use of carbon containing waste and all other waste materials has to be increased to reduce the need for virgin raw materials acquisition, including biomass, and reduce carbon being emitted to the atmosphere therefore mitigating climate change. At end-of-life, carbon-containing waste should not only be treated for energy recovery (e.g. via incineration) but technologies should be applied to recycle the carbon for use as material feedstocks. Thermochemical and biochemical conversion technologies offer the option to utilize organic waste for the production of chemical feedstock and subsequent polymers. The routes towards synthetic materials allow a more closed cycle of materials and can help to reduce dependence on either fossil or biobased raw materials. This chapter summarizes carbon-recycling routes available and investigates how in the long-term they could be applied to enhance waste management in both industrial countries as well as developing and emerging economies. We conclude with a case study looking at the system-wide global warming potential (GWP) and cumulative energy demand (CED) of producing high-density polyethylene (HDPE) from organic waste feedstock via gasification followed by Fischer–Tropsch synthesis (FTS). Results of the analysis indicate that the use of organic waste feedstock is beneficial if greenhouse gas (GHG) emissions associated with landfill diversion are considered.

Description: In rural areas, access to electricity is required for better living standard, enhance income options and reduce population migration. In last decades, steady progress has been made but the status of electrification significantly varies across countries. In developing countries, about 1.6 billion people live without electricity and another 2 billion have access but to an unreliable extent. Large population also live in remote areas where extension of grid is not feasible, where people continuing to live under distress conditions. International projections reveal that number of un-electrified people will remain same by the year 2030 if similar pace of electrification is continued in future.From this perspective, the study describes what bigger countries such as India, China and Brazil are doing and where rural electrification stands in priority in a poor country like Ethiopia. Is off-grid technologies show an option for such remote locations" The two case studies of Vietnam and South Africa reveal that work carried out through external support in the absence of national policies. As a result, people have experienced the benefits of technologies but unable to retain them in long term. Electricity has given various advantages but poor affordability of the people hinders the acceptance of technologies in rural areas.The study shows the need of a framework to achieve the long-term support for rural electrification. A framework that could direct the national priorities, understands social, economic and environmental aspects of off-grid technologies, identify key areas to be strengthen, allocates the roles and responsibilities at different working levels, maintains a consistent flow of adequate finance, pursue regular monitoring process and incorporate the monitoring results, or, critical success factors into the national policies to make them more effective. Both macro- as well as micro-level approaches have been suggested in this study.

Description: After considerable improvements of wastewater treatment, the loads of nutrients and plant protection agents, deriving from agriculture and heavy metals from urban drainages effluents as well as from erosion of agricultural soils are the main sources of nutrients and harmful substances in the loads of water bodies. The targets of the project were on the one hand the analysis of the political and legislative framework of both policy fields and on the other hand the evaluation of several, selected water protection measures with regard to their contribution to reduce water pollution, their economical effects as well as their political enforceability. The focus was laid on diffuse water pollution caused by agriculture. As main reasons for the diffuse water pollution stagnating at high level, the analysis of the political framework identified a lack of implementation discipline of water law, followed by the fragmented and insufficient water protection legislation itself and the previous design of the common agricultural policy slanted towards increasing productivity. For the future co-operation of agricultural and water authorities in implementation of their reforms and better definition of "Good Farming Practice" are recommended. The second investigation level focuses on the analysis and assessment of selected measures to reduce the input of nutrients and plant protection agents. This part was done with help of calculation models focussing on the specific cost/benefit ratios for water protection. In detail the following measures have been analysed: decoupling of direct payments, coupling of livestock farming to areas, tax on mineral nitrogen, pesticide levy, buffer stripes alongside of watercourses, all season crop cover on arable land, soil cultivation procedures, changing the use of arable land, optimisation of animal nutrition, optimisation of manure storage and application, co-operative agreements, education and training. Co-operations and water protection related education and training can be highly recommended, since they improve knowledge and freedom of action. As the results on county level show, the measure "Decoupling of direct payments" would not lead to appreciable changes as far as the nutrient surpluses on farmland is concerned. "Coupling livestock farming to areas" would decrease the surpluses substantially. For this measure and Tax on mineral nitrogen, varying adaptation reactions could be expected depending on the regional specialisation in cropping or livestock farming areas. On single farm level the measures, protein adapted feeding, optimisation of manure storage and application showed the best cost-efficiency to reduce nutrient surpluses. All season crop cover on arable land and conservation tillage are highly efficient, too, and should be included in farming practice. A stronger limitation of livestock density could mean a reduction of manure, but the implementation of this measure would lead to high losses of income for farmers specialised in animal production. For reduction of diffuse water pollution caused by urban drainage political approaches as well as detailed technical measures are examined. In the area of urban drainage storm water management (especially infiltration and constructed wetlands), unsealing of paved areas and small wastewater treatment structures (for phosphorus reduction) showed best cost-effectiveness.

Description: The paper analyzes a Bolivian region for possible cultivation of the oil plant Jatropha curcas for sustainable biodiesel production in order to replace in part Bolivia's diesel imports. The specific site for this study is located in the dry region of Gran Chaco in Santa Cruz. The aim of this work is to analyse the potential of useable land and resources for sustainable biodiesel production from Jatropha without competition with edibles production using economic, environmental and social criteria. In addition the article introduces Jatropha as one of the preferred oil plants for biodiesel production in several countries and indicates its different uses. The recommendation to cultivate Jatropha for biodiesel production is based on an exploration of the possibility of land use in the selected region and the benefits Jatropha production could offer. In this manner a sustainable cultivation of Jatropha in the region of Gran Chaco is recommended to produce biodiesel and to improve some of the environmental problems facing the region.

Description: The analysis of different global energy scenarios in part I of the report confirms that the exploitation of energy efficiency potentials and the use of renewable energies play a key role in reaching global CO2 reduction targets. An assessment on the basis of a broad literature research in part II shows that the technical potentials of renewable energy technologies are a multiple of today's global final energy consumption. The analysis of cost estimates for renewable electricity generation technologies and even long term cost projections across the key studies in part III demonstrates that assumptions are in reasonable agreement. In part IV it is shown that by implementing technical potentials for energy efficiency improvements in demand and supply sectors by 2050 can be limited to 48% of primary energy supply in IEA's "Energy Technology Perspectives" baseline scenario. It was found that a large potential for cost-effective measures exists, equivalent to around 55-60% of energy savings of all included efficiency measures (part V). The results of the analysis on behavioural changes in part VI show that behavioural dimensions are not sufficiently included in energy scenarios. Accordingly major research challenges are revealed.

Description: The article assesses the material footprints of households living on a minimum amount of social benefits in Finland and discusses the consequences in terms of ecological and social sustainability. The data were collected using interviews and a questionnaire on the consumption patterns of 18 single households. The results are compared to a study on households with varying income levels, to average consumption patterns and to decent minimum reference budgets. The low-income households have lower material footprints than average and most of the material footprints are below the socially sustainable level of consumption, which is based on decent minimum reference budgets. However, the amount of resources used by most of the households studied here is still at least double that required for ecological sustainability. The simultaneous existence of both deprivation and overconsumption requires measures from both politicians and companies to make consumption sustainable. For example, both adequate housing and economic mobility need to be addressed. Measures to improve the social sustainability of low-income households should target reducing the material footprints of more affluent households. Furthermore, the concept of what constitutes a decent life should be understood more universally than on the basis of standards of material consumption.

Description: Current production and consumption patterns remain unsustainable: Global economic growth reaches planetary boundaries and puts increasing pressure on the world's natural resources. Whereas most economic actors just react to environmental pressures, proactive market actors and other non-governmental organisations, e.g. greentec firms or fair trade organisations, turn them into market opportunities or even create standards or certification schemes as promising problem-solving market instruments in global value chains. However, how legitimate are standards and certification schemes developed by collaborating non-state actors for sustainability in global value chains? What are conditions for the success of those market-based governance mechanisms? This paper discusses the legitimacy and effectiveness of standard setting in the case of palm oil and focuses on the Roundtable of Sustainable Palm Oil (RSPO) as the first global standard setting initiative in this respect. Conditions for the success of sustainability standard setting in global value chains are identified based on the concept of non-state market-driven (NSMD) governance, based on literature review and expert interviews on standard setting. Results from the case study on RSPO highlight strengths and weaknesses of its standard setting process in the light of increasing market demand for palm oil.

Description: Several countries with large coal deposits but limited domestic oil reserves show high interest in coal-to-liquid (CtL) technologies, which could reduce crude oil imports by converting coal into liquid hydrocarbon fuels. After decades of successful large-scale operating experiences in South Africa, CtL activities in the United States, China and Germany have been fanned by the high oil price in the last years. However, CtL indicates negative techno-economic and resource-related features, such as high capital costs, high greenhouse gas discharges and high water consumption. Therefore, the technology's diffusion strongly depends on a favourable framework of policies and strong technology advocates. Daniel Vallentin analyses interdependencies between technical and non-technical parameters affecting the diffusion of CtL technologies in the United States, China and Germany. Applying the inter-disciplinary technological system approach, he identifies factors which determine the market prospects of CtL in these countries, including costs, the geographic distribution of coal reserves, actor constellations and technology, energy and climate policies. At the end of his study, he derives general conclusions with regard to driving forces and barriers for CtL diffusion. As the investigated countries are major consumers of energy and belong to the world's largest emitters of greenhouse gases, their strategies in substituting crude oil based fuels are of utmost global relevance. Therefore, Vallentin's study is recommended to experts, planners, decision-makers, and politicians in the field of climate and resource protection.

Description: Material flows induced by national economies can be regarded as indirect pressure indicators for environmental degradation. Economy-wide material flow analysis and indicators have been designed to monitor material and energy flows at the macroeconomic level and to provide indicators, which could contribute to management of resourceuse and output emission flows from both economic, environmental and broader sustainability points of view. These indicators can serve various purposes including monitoring the material basis of national economies and related environmental pressures, assessment of the material and resource productivity and monitoring the implications of trade and globalisation. The main part of this paper compares the material and resourceuse of the Czech Republic, Germany and the EU-15 by means of DMI and TMR indicators over the period of 1991–2004 (1991–2000 for EU-15). At the aggregate level both indicators in all three economies do not show any clear decreasing or increasing trends over the period considered. This means that environmental pressure related to use of materials for production and consumption purposes remains rather stable. All the economies however, recorded an increase in the efficiency of transforming the material/resource inputs into economic output. The analysis further revealed that most of the dynamics of DMI and TMR in the Czech Republic tended towards a higher similarity with Germany and the EU-15. In the future, further decreases in DMI as well as in TMR of fossils fuels might be expected in the Czech Republic, which could be counteracted by increase in DMI and TMR of metal ores/metal resources and non-metallic minerals/non-metallic resources. The future development of total DMI, TMR and material/resource intensity in both the Czech Republic and Germany will depend on further shifts to less material intensive industries and services and on increasing material efficiency in production and consumption of particular products. This is not only a technological, but also a social challenge, as there are barriers in current mode of governance and in shaping of current economic and social systems to do so.

Description: The ongoing increase of the world population entails huge challenges for all countries' agro-food systems. Agriculture has to satisfy growing food requirements both in quantitative and qualitative terms, but the on hand natural resource stock is quickly depleting. Moreover, food production and energy production from biomass are competing for land. The thesis aims at measuring the environmental impact of nutrition in three agri-food systems. The study considers the amount of natural resources used in the production and consumption of food along its life-cycle. It is featured in two parts. In the first one the analysis is restricted to the supply chain of food, and provides a sustainability rating of thirty-seven products, grown through different agricultural practices. The second analysis takes into consideration all the value chain according to three paradigms of agri-food systems. They refers to different models of food production and consumption, observed in Italy. The first one is the dominant paradigm, including conventional and intensive farming practices, long and globalized food chains, retailing in supermarkets. The other models refer to Alternative Food Networks (AFN). The first is the GAS (Gruppi di Acquisto Solidali) initiative, i.e. solidarity purchasing groups, that manage collectively the purchasing of organic food and natural manufactured products mainly from local enterprises and farmers. They aim at accessing high quality and naturally grown food, avoiding the retailing passage and ensuring a fair price to the farmers. The third model refers to UPM (Un Punto Macrobiotico), an international association established in the Marche region in 1980. It manages and controls an entire food chain, since the agricultural production, based on the post-organic technique "Ma-Pi polyculture", till the food purchasing and catering, in sixty-three restaurants spread in the Italian territory. UPM is a very consumer-oriented food chain, in which a very exigent demand (in terms of food naturality and healthiness) drives the agricultural production towards the minimization of the external inputs employment. A further model concerns the reduction of the "Food Miles", i.e. the kilometres covered by food, since the dominant paradigm. Thus, in this model the distances are reduced by an average 90%, while the production practices do not change. The methodology used for assessing the sustainability of food is the Material Input Per Service unit (MIPS) indicator. It estimates the overall environmental pressure caused by products or services by indicating the life-cycle-wide consumption of natural resources in relation to the benefit provided. It includes five resource categories: abiotic and biotic materials (renewable resources), water, air and soil. Results of the first analysis provide a dataset of the material intensity of Italian agricultural products and foodstuffs, which can expedite future research on the topic of nutrition’s sustainability. The second analysis evaluates the natural resource demand for feeding one person during a week, in the paradigms under investigation. With respect to the dominant, the GAS model allows a 58% reduction in the abiotic resource demand, 53% in water and 71% in air. The UPM system, instead, permits a tenfold reduction in abiotic, biotic and water, and 82% decrease in the air category. The insight on the socio-economic features of the systems, together with the environmental sustainability measurement, allowed making some general conclusions and policy recommendations on the sustainability of the different food systems. The role of a low external input technology in agriculture is emphasized as a possible strategy for driving food system towards more sustainable patterns and empowering the small-scale farming.

Description: The field of nutrition is facing numerous social, ecological and economic challenges in the coming decades. The food industry belongs to the most significant economic sectors worldwide and the increasing population of 9 billion in 2050 will cause a growing demand on food. So far, changing lifestyles, especially the global rising consumption of meat and dairy products are increasing environmental damage. Moreover our health and wellbeing are the direct result of healthy or unhealthy nourishment and influence follow-up indicators like individual and public health, the expense of the health sector and work productivity. The material footprint is a tool to measure and optimize the resource consumption of both products and their ingredients and the production processes along the whole value chain. It covers the whole life cycle of the products, from the extraction of raw materials to the processing industry, distribution, consumption, recycling, and disposal. In order to decrease resource consumption to a level in line with the planetary boundaries, the material footprint of household consumption should achieve a level of six to eight tonnes per capita in a year by 2050. This means a reduction in natural resource consumption by a factor of 5 to 10 in Western European countries. In order to ensure a decent lifestyle for all people in 2050, also the material footprint of nutrition has to be reduced significantly by 2050. The paper shows the relevance and role of nutrition in the overall material footprint of households on the basis of existing studies on the overall resource consumption caused by household consumption. Quantified meal and diet examples are given. It also discusses the causes of food waste and raises the question how a reduction of food waste is possible and can help decreasing the resource consumption in the food sector.

Description: Shifting the resource base for chemical and energy production from fossil feedstocks to renewable raw materials is seen by many as one of the key strategies towards sustainable development. The utilization of biomass for the production of fuels and materials has been proposed as an alternative to the petroleum-based industry. Current research and policy initiatives focus mainly on the utilization of lignocellulose biomass, originating from agriculture and forestry, as second generation feedstocks for the production of biofuels and electricity. These activities act on the assumption that significant amounts of biomass for non-food purposes are available. However, given a certain productivity per area, the current massive growth in global biofuels demand may in the long term only be met through an expansion of global arable land at the expense of natural ecosystems and in direct competition with the food-sector. Although many studies have shown the potential of biofuels production to reduce both, greenhouse gas emissions and non-renewable energy consumption, these production routes are still linear processes which depend on significant amounts of agricultural or forestry production area. Cascading use, i.e. when biomass is used for material products first and the energy content is recovered at end-of-life, may provide a greater environmental benefit than primary use as fuel. Considering waste and production residues as alternative feedstocks could help to further reduce pressures on global arable land. This research focused on thermochemical and biochemical technologies capable of utilizing organic waste or forestry residuals for energy, chemical feedstock, and synthetic materials (polymers) generation. Routes towards synthetic materials allow a closer cycle of materials and can help to reduce dependence on either fossil or biobased raw materials. The system-wide environmental burdens of three different technologies, including (1) municipal solid waste (MSW) gasification followed by Fischer-Tropsch synthesis (FTS), (2) plasma gasification of construction and demolition (C&D) wood for syngas production with energy recovery, and (3) forest residuals use in a biorefinery for polyitaconic acid (PIA) production, were assessed using life-cycle assessment. The first two studies indicated that MSW gasification and subsequent ethylene and polyethylene production via FTS has lower environmental impacts than conventional landfilling. In the future, as societies may shift towards the use of renewable energy, power offset by conventional waste-to-energy systems would not be as significant and chemicals production routes may then become increasingly competitive (in terms of environmental burdens) also to waste incineration. While production cost of Fischer-Tropsch derived chemicals seems not yet competitive to fossil-based chemicals provision, future price increases in global oil prices as well as changes in waste tipping fees, and efficiency gains on site of the waste conversion systems, may alter the economics and allow carbon recycling routes to reach a price competitive to fossil-based production routes. The third study found that plasma gasification of C&D wood for energy recovery has roughly similar environmental impacts than conventional fossil-based power systems. However, process optimization with respect to coal co-gasified, coke used as gasifier bed material, and fuel oil co-combusted in the steam boiler, would allow to significantly lower the system-wide environmental burdens. The fourth study looked at PIA production from softwood hemicellulose in a stream integrated approach (with the partially macerated wood and lignin being used in other existing processes such as pulp & paper plants for conventional pulp and bioenergy production). The assessment indicated lower global warming potential, energy demand, and acidification, for the wood-based PIA polymer, when compared to corn-based PIA and fossil-based polyacrylic acid (PAA). However, water use associated with wood-derived PIA was found to be higher than for fossil-based PAA production and land occupation is highest for the wood-derived polymer. It is hoped that results of this dissertation will add to the current debate on sustainable waste and biomass utilization and to establish future supply chains for green and sustainable chemical products.

Description: Purpose - Iran as an energy-rich country faces many challenges in the optimal utilization of its vast resources. High rates of population and economic growth, a generous subsidies program, and poor resource management have contributed to rapidly growing energy consumption and high energy intensity over the past decades. The continuing trend of rising energy consumption will bring about new challenges as it will shrink oil export revenues, restraining economic activities. This calls for a study to explore alternative scenarios for the utilization of energy resources in Iran. The purpose of this paper is to model demand for energy in Iran and develop two business-as-usual and efficiency scenarios for the period 2005-2030. Design/methodology/approach - The authors use a techno-economic or end-use approach to model energy demand in Iran for different types of energy uses and energy carriers in all sectors of the economy and forecast it under two scenarios: business as usual (BAU) and efficiency. Findings - Iran has a huge potential for energy savings. Specifically, under the efficiency scenario, Iran will be able to reduce its energy consumption 40 percent by 2030. The energy intensity can also be reduced by about 60 percent to a level lower than the world average today. Originality/value - The paper presents a comprehensive study that models the Iranian energy demand in different sectors of the economy, using data at different aggregation levels and a techno-economic end-use approach to illuminate the future of energy demand under alternative scenarios.

Description: The article estimates the natural resource consumption due to nutrition from the supply and demand sides. Using the MIPS (Material Input per Service Unit) methodology, we analyzed the use of natural resources along the supply chains of three Italian foodstuffs: wheat, rice and orange-based products. These figures were then applied for evaluating the sustainability of diets in 13 European countries. The results outline which phases in food production are more natural resource demanding than others. We also observed different levels of sustainability in the European diets and the effect of different foodstuffs in the materials, water and air consumption.

Description: The study presents the results of an integrated assessment of carbon capture and storage (CCS) in the power plant sector in Germany, with special emphasis on the competition with renewable energy technologies. Assessment dimensions comprise technical, economic and environmental aspects, long-term scenario analysis, the role of stakeholders and public acceptance and regulatory issues. The results lead to the overall conclusion that there might not necessarily be a need to focus additionally on CCS in the power plant sector. Even in case of ambitious climate protection targets, current energy policy priorities (expansion of renewable energies and combined heat and power plants as well as enhanced energy productivity) result in a limited demand for CCS. In case that the large energy saving potential aimed for can only partly be implemented, the rising gap in CO2 reduction could only be closed by setting up a CCS-maximum strategy. In this case, up to 22% (41 GW) of the totally installed load in 2050 could be based on CCS. Assuming a more realistic scenario variant applying CCS to only 20 GW or lower would not be sufficient to reach the envisaged climate targets in the electricity sector. Furthermore, the growing public opposition against CO2 storage projects appears as a key barrier, supplemented by major uncertainties concerning the estimation of storage potentials, the long-term cost development as well as the environmental burdens which abound when applying a life-cycle approach. However, recently, alternative applications are being increasingly considered–that is the capture of CO2 at industrial point sources and biomass based energy production (electricity, heat and fuels) where assessment studies for exploring the potentials, limits and requirements for commercial use are missing so far. Globally, CCS at power plants might be an important climate protection technology: coal-consuming countries such as China and India are increasingly moving centre stage into the debate. Here, similar investigations on the development and the integration of both, CCS and renewable energies, into the individual energy system structures of such countries would be reasonable.

Description: Wind energy that can neither be fed into the grid nor be used regionally must be curtailed. This paper proposes different options to deal with such surplus wind energy amounts in a time horizon until 2020. It assesses their ability to handle the surplus energy in a sustainable way using a multi criteria analysis. The paper bases on a study that was prepared for the Ministry for Climate Protection, Environment, Agriculture, Nature Conservation and Consumer Protection of North Rhine-Westphalia between 2010 and 2012.

Description: The final report of the research project "Power Sector Decarbonisation: Metastudy" contains the various reports prepared by Öko-Institut and Wuppertal Institute during the course of the SEFEP funded project. A key objective of the project was to make a contribution to the debates within the European Union (EU) and Member States on the EU's Energy Roadmap 2050 publication, which was released in December 2011. This objective was achieved by systematically analysing and comparing recently published scenarios on the European electricity sector commissioned by a range of different stakeholders (environmental NGOs, industry and government agencies).

Description: If the current energy policy priorities are retained, there may be no need to focus additionally on carbon capture and storage (CCS) in the power plant sector of Germany. This applies even in the case of ambitious climate protection targets, according to the results of the presented integrated assessment study. These cover a variety of aspects: Firstly, the technology is not expected to become available on a large scale in Germany before 2025. Secondly, if renewable energies and combined heat and power are expanded further and energy productivity is enhanced, there is likely to be only a limited demand for CCS power plants, as a scenario analysis of CCS deployment in Germany shows. Thirdly, cost analysis using the learning curve approach shows that the electricity generation costs of renewable electricity approach those of CCS power plants. This leads to the consequence that, from 2020, several renewable technologies may well be in a position to offer electricity at a cheaper rate than CCS power plants. In addition, a review of new life cycle assessments for CO2 separation in the power plant sector indicates that the greenhouse gas emissions from 1 kW h of electricity generated by first-generation CCS power plants could only be reduced by 68 % to 87 % (95 % in individual cases). Finally, a cautious, conservative estimate of the effective German CO2 storage capacity of approximately 5 billion tonnes of CO2 is calculated, including a fluctuation range yielding values between 4 and 15 billion tonnes of CO2. Therefore, the total CO2 emissions caused by large point sources in Germany could be stored for 12 years (basic value) or for 8 or 33 years (sensitivity values).

Description: This paper examines the effects of an increased integration of concentrated solar power (CSP) into the conventional electricity systems of Morocco and Algeria. A cost-minimizing linear optimization tool was used to calculate the best CSP plant configuration for Morocco's coal-dominated power system as well as for Algeria, where flexible gas-fired power plants prevail. The results demonstrate that in both North African countries, storage-based CSP plants offer significant economic advantages over non-storage, low-dispatchable CSP configurations. However, in a generalized renewable integration scenario, where CSP has to compete with other renewable generation technologies, like wind or photovoltaic (PV) power, it was found that the cost advantages of dispatchability only justify CSP investments when a relatively high renewable penetration is targeted in the electricity mix.

Description: Global trade is increasingly being challenged by observations of growing burden shifting, in particular of environmental problems. This paper presents the first worldwide calculations of shifted burden based on material flow indicators, in particular direct and indirect physical trade balances. This study covers the period between 1962 and 2005 and includes between 82 and 173 countries per year. The results show that indirect trade flow volumes have increased to around 41 billion tonnes in 2005. The traded resources with the highest share of associated indirect flows are iron, hard coal, copper, tin and increasingly palm oil. Regarding the burden balance between regions, Europe is the biggest shifter whereas Australia and Latin America are the largest takers of environmental burden due to resource extraction. To evaluate the findings from a global perspective, the results are analysed in terms of resource flow induced environmental pressure related to a country's land area in terms of total and per capita area. Resource endowment and population density seem to be more relevant in determining the physical trade balance, including indirect flows, than income level.

Description: The cement industry is one of the major energy consuming and CO2 emitting sectors in China. In 2010, 1,868 million tons of cement has been produced, which accounted for 56.1% of the world's total cement production. The 11th Five-Year Plan (FYP) (2006-2010) included policy measures for CO2 emission abatement in cement production. Based on the main governmental framework of CO2 mitigation policies at national level in the cement sector, key policies and technologies used during this period are identified and their effects on CO2 reduction are assessed. This paper calculates the reduction of CO2 emissions related to four main policies and technologies for efficient cement production in the 11th and the 12th FYP (2011-2015) with 2005 as a reference year. These are waste heat recovery, closing outdated facilities, substitution for clinker production and other technologies aiming to increase energy efficiency. Due to these measures, we estimate that a total CO2 emission reduction during the 11th FYP of 397 million tonnes could be saved, which is considerably different to 185.75 million tonnes estimated by Zeng (2008) and 303 million tonnes by the NDRC by using different calculation methods. Of the four technologies, the 4th group of energy efficiency increasing techniques was the most important policy and avoided the largest amount of CO2 emissions. Previous energy intensity reduction was mainly due to the outdated production closing and energy efficiency improving. Based on the assessment of technology performance, it appears that there is still a large emission reduction potential in cement production processes. The paper calculates this potential for the 12th FYP period (2011-2015) based on these four identified policy measures. The result is compared to the Chinese government targets in the 12th FYP and promising future CO2 mitigation policies and technologies are proposed, such as the use of alternative energy.

Description: In the past few decades, geochemically scarce metals have become increasingly relevant for emerging technologies in domains such as energy supply and storage, information and communication, lighting or transportation, which are regarded as cornerstones in the transition towards a sustainable post-fossil society. Accordingly, the supply risks of scarce metals and possible interventions towards their more sustainable use have been subject to an intense debate in recent studies. In this article, we integrate proposed intervention options into a generic life cycle framework, taking into account issues related to knowledge provision and to the institutional setting. As a result, we obtain a landscape of intervention fields that will have to be further specified to more specific intervention profiles for scarce metals or metals families. The envisioned profiles are expected to have the potential to reduce action contingency and to contribute to meeting the sustainability claims often associated with emerging technol ogies.

Description: Greenhouse gas emission reductions are at the centre of national and international efforts to mitigate climate change. In road transportation, many politically incentivised measures focus on increasing the energy efficiency of established technologies, or promoting electric or hybrid vehicles. The abatement potential of the former approach is limited, electric mobility technologies are not yet market-ready. In a case study for Germany, this paper focuses on natural gas powered vehicles as a bridging technology in road transportation. Scenario analyses with a low level of aggregation show that natural gas-based road transportation in Germany can accumulate up to 464 million tonnes of CO2-equivalent emission reductions until 2030 depending on the speed of the diffusion process. If similar policies were adopted EU-wide, the emission reduction potential could reach a maximum of about 2.5 billion tonnes of CO2-equivalent. Efforts to promote natural gas as a bridging technology may therefore contribute to significant emissions reductions.

Description: Consumption of natural resources should not exceed sustainable levels. The increasing use of biofuels and to some extent biomaterials, on top of rising food and feed demands, is causing countries to use a growing amount of global land, which may lead to land use conflicts and the expansion of cropland and intensive cultivation at the expense of natural ecosystems. Selective product certification cannot control the land use change triggered by growing overall biomass consumption. We propose a comprehensive approach to account for the global land use of countries for their domestic consumption, and assess this level with regard to globally acceptable levels of resource use, based on the concept of safe operating space. It is shown that the European Union currently uses one-third more cropland than globally available on a per capita basis and that with constant consumption levels it would exceed its fair share of acceptable resource use in 2030. As the use of global forests to meet renewable energy targets is becoming a concern, an approach to account for sustainable levels of timber flows is also proposed, based on the use of net annual increment, exemplified with preliminary data for Switzerland. Altogether, our approach would integrate the concept of sustainable consumption into national resource management plans; offering a conceptual basis and concrete reference values for informed policy making and urging countries to monitor and adjust their levels of resource consumption in a comprehensive way, respectful of the limits of sustainable supply.

Description: In a new waste hierarchy the amended EU Waste Framework Directive (WFD) (2008/98/EG) confirmed the prevention of waste as a priority measure to protect the environment with regard to the production and handling of waste. Amongst others the Member States are requested to promote waste prevention. According to article 29 par. 1 WFD the prevention measures have to be planned in terms of waste prevention programmes to be created by the Member States until December 12th 2013. These prevention programmes are to describe existing waste prevention measures and set waste prevention goals. The progress is to be monitored and assessed by targeting appropriate, specific qualitative or quantitative benchmarks for adopted waste prevention measures. The programmes may be included in waste management plans or other environmental programmes. By the objectives and measures of prevention programmes the environmental impacts associated with generation of waste shall be decoupled from economic growth.