ALBERT

Description: This document is intended to provide basic guidance to researchers who work with digital data as well as all stakeholders with an interest in this issue and also provides advice on sources of further information. It was prepared by the Research Data Working Group in the Priority Initiative “Digital Information” of the Alliance of German Science Organisations.

Description: Der glazial-isostatische Ausgleich in Island infolge des rezenten Abschmelzens der Vatnajökull-Eiskappe wird durch die Viskositätsverteilung im Erdinnern und durch die Details der Abschmelzgeschichte kontrolliert. Interpretationen der Ergebnisse von GPS- und Schweremeßkampagnen im Zeitintervall 1991–2000 bzw. 1992–1999 mit Hilfe lateral homogener Erdmodelle zur Bestimmung der Lithosphärenmächtigkeit, Asthenosphärenmächtigkeit und Asthenosphärenviskosität sind bislang nicht voll zufriedenstellend gewesen. Insbesondere nahe des Eisrandes war die Anpassung der berechneten Landhebung und Schwereänderung an die Beobachtungsdaten nur unzureichend, was mit der Nichtberücksichtigung des Island-Plumes in den lateral homogenen Erdmodellen zusammenhängen kann. In der vorliegenden Arbeit wird für die Modellierung der Landhebung und Schwereänderung ein Programmpaket verwendet, daß die Berechnung auflastinduzierter Störungen eines Maxwellviskoelastischen, inkompressiblen, selbstgravitierenden, sphärischen Erdmodells gestattet. Um das Vorhandensein des Plumes unter dem Vatnajökull zu simulieren, wird eine axialsymmetrische Viskositätsverteilung verwendet, wobei der Plumeradius und die Plumeviskosität freie Parameter sind. Basierend auf seismischen Ergebnissen wird über dem Plume eine 6 km mächtige Lithosphäre angenommen, die sich im peripheren Bereich des Plumes auf 35 km verdickt. Die Abschmelzgeschichte des Vatnajökulls beruht auf Interpretationen geomorphologischer und klimatologischer Untersuchungen und wird durch eine mit dem Plume koaxiale Last mit parabolischem Profil und zeitabhängigem Radius simuliert. Die Ergebnisse der Modellierung favorisieren einen Plumeradius von ~ 80 km und eine Plumeviskosität von (0.3–1.0) × 1018 Pa s.

Description: Die vorliegende Ausgabe des GFZ-Journals „System Erde“ soll einen Einblick in die am GFZ betriebene Forschung zur Seismologie geben.

Description: The intention of this article is to present the definitions of different functionals of the Earth's gravity field and possibilities for their approximative calculation from a mathematical representation of the outer potential. [...] More or less, what is compiled here is well-known in physical geodesy but distributed over a lot of articles and books which are not cited here. In the first instance this text is targeted at non-geodesists and it should be "stand-alone readable".

Description: The International Continental Scientific Drilling Program (ICDP) performed a dual-phase scientific drilling project to investigate mountain-building processes called Collisional Orogeny in the Scandinavian Caledonides (COSC). The borehole COSC-1 was drilled through the Lower Seve Nappe, as the first of two 2.5 km deep drill holes close to Åre, central Sweden. The recovered rocks comprise a 1650 m thick suite of high grade gneisses and amphibolites with clear Seve Nappe affinities, while the lower 850 m comprise rather homogenous mylonitic gneisses with interfingered K-rich phyllonite bands of cm to several m size and some intercalated amphibolites. The different lithologies all crosscut the core in a subhorizontal direction with foliation of gneisses and phyllonites in the same direction. Albite and garnet porphyroblasts with pressure shadows show syn-deformational growth and the same sub-horizontal alignment. The focus of this thesis is to detect chemical and mineralogical differences in mylonitic and host rocks and to relate these differences to either metasomatism and deformation or inherited source rock variance. Another goal of this work is to compare chemical core scanning instruments. For this purpose two different μ-Energy-Dispersive X-Ray Fluorescence (μ-EDXRF), Laser Induced Breakdown Spectroscopy (LIBS) and hyperspectral imaging techniques served to measure seven samples from the lower 850 m of the COSC-1 core. The measurements reveal sharp borders between different rock types without indication of metasomatic changes, pointing to a heterogeneous protolith such as greywacke. Element and mineral maps show strong pervasive ductile deformation with mylonite recrystallization. The comparison of the scanning devices shows that the μ-EDXRF scanner with 50 μm resolution can be used perfectly for microstructural investigations and heavy element analysis. The XRF core scanner from AVAATECH is very useful and sufficiently precise for element profiles of line scans. The LIBS scanner is great to create distribution maps of elements from H to U with a resolution of 200 μm. The hyperspectral cameras are extremely fast in acquiring spectral mineral maps and structural information. However, several rock forming minerals in gneisses can currently not be identified and a calibration for metamorphic rocks is still needed.

Description: The GeoDataNode project, funded by the Federal Ministry for Research and Education (BMBF) conducted a survey of data management practices at GFZ. The aim was to assess the state of current practices and needs, and their alignment to institutional and national guidelines for data management. The target audience included scientific and technical employees at all levels. A response rate of 24% of the target demographic was achieved. The survey revealed a general need for improvement and structuring of research data handling. This includes provision of adequate storage space, back-up schedules, and the familiarization of young researchers with good scientific practice.

Description: The striking improvements in long- to medium-wavelengths gravity field recovery achieved with GPS-CHAMP and GPS-GRACE high-low and GRACE K-band range low-low satellite-to-satellite tracking prompted us to combine the satellite data with surface data from altimetry over the oceans and gravimetry over the continents to generate a new, high resolution global gravity field model: EIGEN-CG01C. The model is complete to degree/order 360 in terms of spherical harmonics and resolves half-wavelengths of 55 km in the geoid and gravity anomaly fields. A special band-limited combination method has been applied in order to preserve the high accuracy from the satellite data in the lower frequency band of the geopotential and to allow for a smooth transition to the high-frequency band, dominated by the surface data. Compared to pre-CHAMP/GRACE global high-resolution gravity field models, the accuracy was improved by one order of magnitude to 4 cm and 0.5 mgal in terms of geoid heights and gravity anomalies, respectively, at a spatial resolution of 200 km half-wavelength. The overall accuracy at degree/order 360 is estimated to be 20 cm and 5 mgal, respectively, and benefits significantly from recently released new gravity anomaly compilations over the polar regions. In general, the accuracy over the oceans is better than over the continents reflecting the higher quality of the available surface data.

Description: The purpose of this study is to refine the probabilistic seismic hazard assessment for Vanuatu. The analysis is complicated by inconsistencies of the global and local data for the investigated region and systematic inadequacies of the attenuation relation available. An additional aspect in the field of which more research would be desirable is the de-clustering algorithm for the identification of dependent earthquakes. In order to quantify the inevitable uncertainties associated with our results, we used a Logic Tree approach. The report is subdivided into seven chapters. Chapter 2 summarises the geology and tectonic setting of the Vanuatu island arc. Prior scientific investigations will be sketched briefly and to the degree to which they are relevant for our further considerations. The consecutive Chapter 3 describes the different data sources used for the calculations. Together, the local earthquake catalogue provided by the IRD (Institut de Recherche pour le D´eveloppement) and the global catalogues constitute a comprehensive data base for the region. The homogenisation of different catalogues required the conversion of magnitudes through maximum likelihood regressions. Chapter 4 gives a brief overview over the methodological concept applied. The implementation of the Cornell methodology involves two key steps: The first step is to construct a seismicity model (Chapter 5) including the definition of source zones and seismicity parameters characterising the level and type of activity in the respective zone. The second step is to determine an appropriate attenuation relation for the earthquake-generated ground motion in dependence of magnitude and distance. Chapter 6 compares several attenuation relations from the recent geophysical literature. We argue that the modeling of attenuation is the weakest link in this analysis and the major source of uncertainty. The new seismic hazard maps are presented and discussed in Chapter 7. The map that we consider to be the most relevant is also shown on the inner title page of this report. Our findings indicate that the seismic hazard in Vanuatu has been underestimated by prior assessments such as the Global Seismic Hazard Assessment Programme GSHAP (cf. Fig. 1.1).