ALBERT

Description / Table of Contents: PREFACE The CERN Accelerator School (CAS) was founded in 1983 with the aim to preserve and disseminate the knowledge accumulated at CERN (European Organization for Nuclear Research) and elsewhere on particle accelerators and storage rings. This is being achieved by means of a biennial programme of basic and advanced courses on general accelerator physics supplemented by specialized and topical courses as well as Workshops. The chapters included in this present volume are taken from one of the specialized courses, Applied Geodesy for Particle Accelerators, held at CERN in April 1986. When construction of the first large accelerators started in the 1950's, it was necessary to use geodetic techniques to ensure precise positioning of the machines' components. Since that time the means employed have constantly evolved in line with technological progress in general, while a number of specific developments - many of them achieved at CERN - have enriched the range of available instruments. These techniques and precision instruments are used for most of the world's accelerators but can also be applied in other areas of industrial geodesy: surveying of civil engineering works and structures, aeronautics, nautical engineering, astronomical radio-interferometers, metrology of large dimensions, studies of deformation, etc. The ever increasing dimensions of new accelerators dictates the use of the best geodetic methods in the search for the greatest precision, such as distance measurements to 10 -7, riqorous evaluation of the local geoid and millimetric exploitation of the Navstar satellites. At the same time, the powerful computer methods now available for solving difficult problems are also applicable at the instrument level where data collection can be automatically checked. Above all, measuring methods and calculations and their results can be integrated into data bases where the collection of technical parameters can be efficiently managed. In order to conserve the logical presentation of the different lectures presented at the CAS school, the chapters presented here have been grouped under four main topics. The first and the fourth deal with spatial and theoretical geodesy, while the second and third are concerned with the work of applied geodesy, especially that carried out at CERN. Readers involved in these subjects will find in the following chapters, if not the complete answer to their problems, at least the beginning of solutions to them.

Description / Table of Contents: Starting from a more general discussion of mechanisms controlling organic carbon deposition in marine environments and indicators useful for paleoenvironmental reconstructions, this study concentrates on detailed organic-geochemical and sedimentological investigations of late Cenozoic deep-sea sediments from (1) the Baffin Bay and the Labrador Sea (ODP-Leg 105), (2) the upwelling area off Northwest Africa (ODP-Leg 108), and (3) the Sea of Japan (ODP-Leg 128). Of major interest are shortas well as long-term changes in organic carbon accumulation during the past 20 m.y. As shown in the data from ODP-Legs 105, 108, and 128, sediments characterized by similar high organic carbon contents can be deposited in very different environments. Thus, simple total organic carbon data do not allow (i) to distinguish between different factors controlling organic carbon enrichment and (ii) to reconstruct the depositional history of these sediments. Data on both quantity and composition of the organic matter, however, provide important informations about the depositional environment and allow detailed reconstructions of the evolution of paleoclimate, paleoceanic circulation, and paleoproductivity in these areas. The results have significant implications for quantitative models of the mechanisms of climatic change. Furthermore, the data may also help to explain the formation of fossil black shales, i.e., hydrocarbon source rocks. (1) BAFFIN BAY AND LABRADOR SEA The Miocene to Quaternary sediments at Baffin Bay Site 645 are characterized by relatively high organic carbon contents, most of which range from 0.5% to almost 3%. This organic carbon enrichment was mainly controlled by increased supply .of terrigenous organic matter throughout the entire time interval. Two distinct maxima were identified: (i) a middle Miocene maximum, possibly reflecting a dense vegetation cover and fluvial sediment supply from adjacent islands, that decreased during late Miocene and early Pliocene time because of expansion of tundra vegetation due to global climatic deterioration; (ii) a late Pliocene-Pleistocene maximum possibly caused by glacial erosion and meltwater outwash. Significant amounts of marine organic carbon were accumulated in western Baffin Bay during middle Miocene time, indicating higher surface-water productivity (up to about 150 gC m -2 y-l) resulted from the inflow of cold and nutrient-rich Arctic water masses. The decrease in average surface-water productivity to values similar to those of the modern Baffin Bay was recorded during the late Miocene and was probably caused by the development of a seasonal sea-ice cover. At Labrador Sea Sites 646 and 647, organic carbon contents are low varying between 0.10% and 0.75%; the origin of most of the organic matter probably is marine. A major increase in organic carbon accumulation at Site 646 at about 7.2 Ma may indicate increased surface-water productivity triggered by the onset of the cold East-Greeniand Current system. Near 2.4 Ma, i.e., parallel to the development of major Northern Hemisphere Glaciation, accumulation rates of both organic carbon and biogenic opal decreased, suggesting a reduced surface-water productivity because of the development of dosed seasonal sea-ice cover in the northern Labrador Sea. The influence of varying sea-ice cover on surface-water productivity is also documented in the short-term glacial/interglacial fluctuations in organic carbon deposition at Sites 646 and 647. (2) UPWELLING AREAS OFF NORTHWEST AFRICA The upper Pliocene-Quaternary sediments at coastal-upwelling Site 658 are characterized by high organic carbon contents of 4%; the organic matter is a mixture of marine and terrigenous material with a dominance of the marine proportion. The upper Miocene to Quaternary pelagic sediments from close-by non-upwelling Sites 657 and 659, on the other hand, display low organic carbon values of less than 0.5%. Only in turbidites and slumps occasionally intercalated at the latter two sites, high organic carbon values of up to 3% occur. The high accumulation rates of marine organic carbon recorded at Site 658 reflect the high-productivity upwelling environment. Paleoproductivity varies between 100 and 400 gC m "2 y-1 during the past 3.6 m.y. and is clearly triggered by changes in global climate. However, there is no simple relationship between climate and organic carbon supply, i.e., it is not possble to postulate that productivity was generally higher at Site 658 during glacials than during interglacials or vice versa. Changes in the relative importance between upwelling activity (which was increased during glacial intervals) and fluvial nutrient supply (which was increased during interglacial intervals) may have caused the complex productivity record at Site 658. Most of the maximum productivity values, for example, were recorded at peak interglacials and at terminations indicating the importance of local fluvial nutrient supply at Site 658. Near 0.5 Ma, a long-term decrease in paleoproductivity occurs, probably indicating a decrease in fluvial nutrient supply and/or a change in nutrient "content of the upwelled waters. The former explanation is supported by the contemporaneous decrease in terrigenous organic carbon and (river-borne) clay supply suggesting an increase in long-term aridity in the Central Sahara. At Site 660, underneath the Northern Equatorial Divergence Zone, (marine) organic carbon values of up to 1.5% were recorded in upper Pliocene-Quaternary sediments. During the last 2.5 Ma, the glacial sediments are carbonate-lean and enriched in organic carbon probably caused by the influence of a carbonate-dissolving and oxygen-poor deep-water mass. (3) SEA OF JAPAN Based on preliminary results of organic-geochemical investigations, the Miocene to Quaternary sediments from ODP-Sites 798 (Oki Ridge) and 799 (Kita-Yamato-Trough) are characterized by high organic carbon contents of up to 6%; the organic matter is a mixture between marine and terrigenous material. Dominant mechanisms controlling (marine) organic carbon enrichments are probably high-surface water productivity and increased preservations rates under anoxic deep-water conditions. In the lower Pliocene sediments at Site 798 and the Miocene to Quaternary sediments at Site 799, rapid burial of organic carbon in turbidites may have occurred episodically. Distinct cycles of dark laminated sediments with organic carbon values of more than 5% and light bioturbated to homogenous sediments with lower organic carbon contents indicate dramatic shortterm paleoceanographic variations. More detailed records of accumulation rates of marine and terrigenous organic carbon and biogenic opal as well as a detailed oxygen isotope stratigraphy are required for a more precise reconstruction of the environmental history of the Sea of Japan through late Cenozoic time.

Description / Table of Contents: INTRODUCTION The evaporite deposits of the Werra district, especially in the Hattorf mining field, are considered a worldwide unique location for the occurence of numerous basalt dikes and magmatic fluid phases fixed in salt rocks. In spite of the great number of studies dealing with the magmatites in the Werra region, previous investigations have rarely attempted more than a predominantly 'qualitative' description of the basaltic rocks and the effects of volcanism on the evaporites (see Chapter 2). The method of interpreting the mineralogical and chemical composition of the evaporites at the basalt contact is based on previous works (KNIPPING 1984; KNIPPING & HERRMANN 1985). This study should contribute to understanding (i) the mechanism of intrusion of the basaltic rnelts and (ii) the metamorphic processes occurring in the evaporites caused by mobile phases during volcanism. Hence, the following methods were applied: The mineralogical and chemical description of the basaltic rocks with recent nomenclature including the possible differences between individual dikes and between surface- and subsurface-exposed basalts. Seven surface and 48 subsurface exposures at the Hattorf mine of Kali & Salz AG were studied. Application of the most recent knowledge on basalt genesis for interpreting observational and experimental results. Studies on the sulfur and carbon isotope distributions of the native sulfur from several subsurface exposures and the enrichments of gases (predominantly CO2) in the evaporites. Calculation of the spatial and temporal temperature distribution in the evaporite rocks following intrusion of the basaltic melts. For purposes of clarity a few of the terms which will be used frequently here will first be defined: basalt - all of the intrusive rocks studied can be assigned mineralogically and chemically to the basalt family in a broader sense. Thus, the terms basaltic rock or, in short, basalt will be used for these rocks. rock salt - instead of the term salt for halitic rocks the term rock salt is used. Besides, the evaporites are generally designated as host rocks (for the basalt dikes) as well. gases - especially in the German literature the term carbon dioxide or carbonic acid (= Kohlensäure) is frequently used for the gases enclosed in the evaporites of the Werra-Fulda district. ACKERMANN et al (1964) found, in addition to carbon dioxide, considerable amounts of nitrogen and minor amounts of methane. In the following therefore the terms gas mixture or gas will be used. The various basalt dikes found in the Hattorf mining field are described here in terms of their mineralogy and geochemistry for the first time. In doing so it is necessary to number them from east to west. To avoid confusion with older numerations (e.g. SIEMENS 1971) the various dike systems are designated by capital letters (A to P).

Description / Table of Contents: Digital signal processing has become more and more an integral part of observational seismology. While it offers unprecedented power in extracting information from seismic signals, it comes at the price of having to learn a variety of new skills. Dealing with digital seismic data requires at least a basic understanding of digital signal processing. Taking the calculation of true ground motion as the guiding problem, this course covers the basic theory of linear systems, the design and analysis of simple digital filters, the effect of sampling and A/D conversion and an introduction to spectral analysis of digital signals. It contains a number of examples and exercises that can be reproduced using the PITSA software package (Scherbaum and Johnson 1993) or similar programs.

Description / Table of Contents: PREFACE The Lower Triassic Buntsandstein in Middle Europe which originated in mainly continental fluvla] environment in the Mid-European Triassic Basin is a famous terrestrial red bed sequence that is discussed in the geological literature since more than 200 years. Much of the earlier work had been devoted to stratigraphical, palaeogeographical and petrographical problemsof the Buntsandstein. The sedimentological analysis and deposltional modelling in the German-type facies, however, is the youngest branch of Buntsandstein investigation and started only a few decades ago. During the last ten years when I began to concentrate on the interpretation of the genesis of the Buntsandstein, much work has been carried out and has already been documented in numerous papers that focussed on various aspects of sedimentology, particularly on reconstruction of fluvial and aeolian depositional mechanisms, significance of palaeosols, importance of fluvial conglomerates, palaeoecology of the fossils, interdisciplinary sedimentology, diagenesis of heavy minerals and origin of the red colour. A summary of the present knowledge in the western part of the German Basin is given in a compilation of regional articles together with general discussions and comparative contributions and especially with an extensive colour photographic documentation in an earlier book (reference on p. 12). In the last few years when more and more material became available not only from the Buntsandstein s. str. (Lower Triassic Scythian) in the Mid-European Triassic Basin, but also from correlative sequences in adjoining areas and even older or younger series of similar facies and origin, it became more and more evident that a synthesis of the state of the art would be necessary, if not inevitably for outlining the general frame and illustrating the diversification of facies associations in numerous temporal and spatial scales. That is why I decided to edit an international proceedings volume on the Buntsandstein which is to compile contributions from many regions and different stratigraphic units with emphasis on various aspects of fluvia] sedi~ntation, but stressing also the importance of the distribution of associated environments such as aeolian dunes and calcrete palaeosols. In spite of my own enthusiasm for the Buntsandstein continental red bed formation (the Lower Triassic red rocks seem to have a very special flavour for being so attractive for me) and regardless of the expansion of my investigations from my original Eife] area (where I learnt how to assess the facies assoCiations in terms of depositional modelling and where I collected an enormous amount of data that served as a valuable base for the production of various case studies which were published during the last years) to several other regions, it was without any doubt that it would not be possible for me alone to finish such an overregional proceedings book within a reasonable time, but that I had to beg various colleagues for their collaboration by writing papers on the Buntsandstein in their investigated areas for this volume. Although the response to my first and second circulars soon showed that it would not be possible to publish a compilation of articles from almost all the studied regions, formations and aspects within a reasonable time with avoiding too much delay of appearance for early contributors, I am very happy that finally many colleagues provided me with papers from almost all the countries in Europe where Buntsandstein is cropping out at the surface. In spite of the tremendous editorial work which was necessary to polish the English, to improve the contents of text and drawings and to put the sequence of papers into a general stream line, I would like to thank all my colleagues who contributed to this volume for their support of the project and particularly for their understanding of my editorial task, especially in case of my frequently serious intervention into their early manuscripts and illustrations. Looking for a publisher in the early stages of planning the volume, I found immediately support by Dr. W. Engel (Department of Geological Sciences of the Springer- Verlag) who generously offered me to take the book into the newly founded series "Lecture Notes in Earth Sciences". From the beginning of organization, writing and editing, I appreciated very much the close cooperation with Dr. Engel who always had an ear for my problems and gave me the necessary freedom to finish the volume along the lines of my intention. Although the preparation of the camera-ready manuscript leaves nearly all the work and responsibility with the author, I am especially grateful to Dr. Engel for his guarantee of almost immediate publication after receipt of the final manuscript which allowed me to polish and incorporate latest ideas up to the very terminal moment. Writing on a subject like the Buntsandstein which has proven to be considerably diversified in terms of sedimentary processes and depositional mechanisms, it became soon apparent that a full discussion along my original intention would easily end up with several thousands of pages in size and would consume much more than a few years. Having already rePeatedly experienced in the past that during course of incorporation of nearly all the relevant literature, the reference l i s t of the final paper is often longer than the whole first draft of the article after one or two years collection of data and ideas, there was no other way than to decide to keep the bibliography short. In order to restrict the book to an economical frame and not to frighten the readership to death, but especially to avoid drowning of the red line through the volume, many contributions had to be written as summary presentations without detailed discussion of the literature. Speaking particularly for the articles that have been written by myself either alone or together with friends, I can assure that this is by no means the result of proud neglectance of other works, but only the necessity of streamlining of the book, and that much of the detailed discussion of comparative examples from the literature has to be done in subsequent special papers. It is impossible to acRnowledge all the people that helped me to arrive at the present goal. Special merits, however, deserve those who stimulated my interest for the Buntsandstein. I am especially indebted to Prof. Dr. G. Fuchs (Landessammlungen fur Naturkunde, Karlsruhe) who proposed me ten years ago to work on the Eifel Buntsandstein for my M.Sc. Thesis, and who later supervised together with Prof. Dr. W. Dachroth (Department of Geology and Palaeontology, University of Heidelberg) the preparation of my Ph.D. Thesis. The good luck of the former to choose the Eifel for me as a starting region (which later proved to have a key position for approaching the evolution of fluvial sedimentation in many other Buntsandstein areas), and the earlier investigations of the latter (although largely unpublished and even only briefly touched in his contribution to this volume) triggered my love of the Buntsandstein which has reached a preliminary climax with the present book. It is my pleasure to dedicate this volume to my two former supervisors with very many thanks for their support and in honour of their merit to have lighted the fire. It is my sincere wish to acknowledge again all the people who contributed with articles to this volume for their help to prepare this summary of the state of the art of Buntsandstein fluvial sedimento]og~y. I also want to sincerely thank all friends and colleagues who supplied ideas and facts in oral or written form and who guided me in the field during course of my comparative investigations that helped me considerably in proceeding with the interpretation of the Buntsandstein. Thanks are also due to Helmut Mader (my father) and Martha Herrmann (my aunt) for their support. I am further indebted to those who have been involved in the various technical aspects of the preparation of the manuscript from the beginning of word processor typesetting of the text and reprography of the illustrations to the final printing. I do hope that the compilation of articles on fluvial aspects of the Buntsandstein in this book will stimulate the interest of many people in the topic of sedimentological modelling of terrestrial red bed sequences and will internationally highlight the position of the Buntsandstein as an extraordinarily attractive case history of fluvial deposition.

Description / Table of Contents: PREFACE The search for tin dates back to the earliest days of civilization. For about 40 years, world tin mining has oscillated at a level of 150,000-250,000 t Sn/year, with a mine output in 1989 of 210,000 t Sn (MCS 1990). This figure corresponds to a current annual value of about US$1.5 billion and places tin ninth on the metal market behind iron, gold, uranium, copper, zinc, silver, platinum and nickel. Tin deposits belong to the granite-related ore deposit spectrum which includes many metals vital to current and future technologies such as Cu, W, Mo, U, Nb, Ta, Ag, Au, Sb, Bi, As, Pb, Zn, REE, Be, Ga and Li. The granitic rocks associated with tin and tin-tungsten deposits have long been identified as a special group of granites, the so-called tin granites. These rocks provide a unique opportunity to study the magmatic and hydrothermal history of tin ore formation. Tin granites are more easily identifiable as parent rocks for tin (and tungsten) mineralization than is the case for other mineralized granitic rocks such as molybdenum and copper porphyries. The magmatic molybdenum and copper distribution patterns are more complex (control by sulfide solubilities), and commonly obliterated by fluid interaction. The relatively simple situation of tin granites provides therefore an invaluable opportunity to study some metallogenic aspects of magmatic-hydrothermal ore deposits in general. The present study attempts to develop a general metallogenic model for tin in identifying the essential or relevant processes in tin ore formation. The methodological principle is based, on an interplay between a background of some basic petrogenetic concepts and a number of specific local and regional data on tin deposits and tin provinces, with particular reference to those areas with which the author is most familiar with (Bolivia, SE Asia, Europe). This inductive approach condenses the many apparently specific complexities encountered in individual ore deposits to a few major processes of general importance. The inherent reductionism may have a personal bias which is probably inevitable in any simple and broad-scale picture ("Apr6s tout, la raison est bien I'esclave des passions"; Feyerabend 1979:210). The critical problem of the relevance of those factors chosen for our model can be judged by its degree of consistency and predictive capability for new and analogous cases...

Description / Table of Contents: INTRODUCTION Theoretical modelling and the use of mathematical methods are presently gaining in importance since progress in both geology and mathematics offers new possibilities to combine both fields. Most geological problems are inherently geometrical and morphological, and, therefore, amenable to a classification of forms from a "Gestalt point of view". Geometrical objects have to possess an inherent stability in order to preserve their essential quality under slight deformations. Otherwise, we could hardly conceive of them or describe them, and today's observation would not reproduce yesterday's result (DANGELMAYR & GÜTTINGER, 1982). This principle has become known as "structural stability" (THOM, 1975), i.e. the persistence of a phenomenon under all allowed perturbations. Stability is also, of course, an assumption of classical Newtonian physics, which is essentially the theory of various kinds of smooth behavior (POSTON &STEWART, 1978). However, things sometimes "jump". A new species with a different morphology appears suddenly in the paleontological record (EI.DREDGE & GOULD, 1972), a fault develops, a landslide moves, a computer program becomes unstable with a certain data configuration, etc. It is, surprisingly, the topological approach which permits the study of a broad range of such phenomena in a coherent manner (POSTON & STEWART, 1978; LU, 1976; STEWART, 1982). The universal singularities and bifurcation processes derived from the concept of structural stabiIity determine the spontaneous formation of qualitatively similar spatio-temporal structures in systems of various geneses exhibiting critical behavior (DANGELMAYR & GÜTTINGER, 1982; THOM, 1975; POSTON & STEWART, 1978; GÜTTINGER & EIKEMEIER, t979; STEWART, 1981). In addition, this return to a "geometrization of phenomena"-- after decades of algorithmization-- comes much closer to the geologist's intuitive geometric reasoning. It is the aim of this study to elucidate, by examples, how the qualitative geometrical approach allows one to classify forms and to control the behavior of complex computer algorithms...

Description / Table of Contents: Introduction / Pages 1-32 --- Interpretation using nomograms / Pages 33-47 --- Linear parameters / Pages 49-114 --- Non-linear parameters / Pages 115-173 --- Maximum likelihood and maximum entropy / Pages 175-193 --- Analytic inversion / Pages 195-211 --- Advanced inversion methods / Pages 213-227 --- Error analysis / Pages 229-243 --- Parallel computation in modelling and inversion / Pages 245-255

Description / Table of Contents: INTRODUCTION The International Summer School of Theoretical Geodesy on Satellite Altimetry in Geodesy and Oceanography was held in Trieste (Italy) from May 25 to June 6, igg2. It was organized by Prof. R. Rummel of the Delft University of Technology and by Prof. F. Sansò of the Politecnico di Milano and was attended by 63 participants and 7 lecturers from 17 countries. The School was hosted by the International Centre of Theoretical Physics of Trieste. Satellite altimetry provides a lot of data that require more and more sophisticated models in order to be interpreted and exploited. One of the main problems related to the practical treatment of the data can be summarized as follows: oceanographers would like to ask geodesists to compute precise orbits and a precise geoid in order to put into evidence the Sea Surface Topography that can be interpreted as an oceanographic signal related to currents and to several physical parameters; on the other hand, geodesists would like to ask oceanographers to a-priori determine the Sea Surface Topography, in order to be able to extract from the altimeter data the geoid and the orbit errors to be used in the gravity field modelling. The solution to this dilemma can only be found in a cooperative frame. An integrated model to be used for a single-step treatment of altimetry is probably far to be defined, so at present geodesists and oceanographers must cooperate to obtain step-wise and iterative modelling of the gravity field and of the oceanographic phenomena. This is precisely the reason why the school on Satellite Altimetry was organized on an interdisciplinary basis...

Description / Table of Contents: PREFACE This book represents the first attempt in three decades to marshall out available information on the regional geology of Africa for advanced undergraduates and beginning graduate students. Geologic education in African universities is severely hampered by the lack of a textbook on African regional geology. This situation is greatly exacerbated by the inability of most African universities to purchase reference books and maintain journal subscriptions. Besides, geologic information about Africa is so widely dispersed that a balanced and comprehensive course content on Africa is beyond the routine preparation of lecture notes by university teachers. Since geology is a universal subject and Africa is one of the largest landmasses on Earth with one of the longest continuous records of Earth history, there is no doubt that geologic education in other parts of the world will benefit from a comprehensive presentation of African geologic case histories. The scope of this text also addresses the need of the professional geologist, who may require some general or background information about an unfamiliar African geologic region or age interval. Africa occupies a central position in the world's mineral raw materials trade. Because of its enormous extent and great geologic age, the diversity and size of Africa's mineral endowment is unparalleled. Africa is the leading source of gold, diamond, uranium, and dominates the world's supply of strategic minerals such as chromium, manganese, cobalt, and platinum. Consequently, African nations from Algeria to Zimbabwe depend solely on mineral exports for economic survival. The geologic factors which govern economic mineral deposits are stressed in this text. The geological history of Africa spans 3.8 billion years, a record that is unique both in duration and continuity. Few other parts of our planet match the plethora of geologic phenomena and processes that are displayed in the African continent. From the various stages of crustal evolution decipherable from the Archean of southern Africa, through the plate tectonics scenarios in the ubiquitous Late Proterozoic-Early Paleozoic Pan-African mobile belts and in the Hercynian and Alpine orogenies of northwest Africa, to the East African Rift Valley, Africa is replete with excellent examples and problems for a course on regional tectonics. Teachers of igneous and metamorphic petrology can hardly ignore Africa's anorogenic magmatism (e.g.. layered ultramafic intrusives such as the Great Dyke and the Bushveld Complex; the Tete gabbro-anorthosite pluton; alkaline complexes; basaltic volcanism), or tantalizing highgrade metamorphic terranes such as the Limpopo belt, the Namaqua mobile belt, and the Mozambique belt. From the extensive Precambrian supracrustal sequences throughout the continent with enormous thicknesses of sedimentary rocks that have hardly been deformed or metamorphosed, to the stratigraphic evolution of Africa's present-day passive continental margin, there is a complete spectrum of facies models upon which to base a course on basin analysis and stratigraphy. To maintain its integrity a course on historical geology anywhere in the world must address the theory of Continental Drift beyond invoking past continuities between West Africa and South America. Past connections between West Africa and eastern North America must equally be explored, so also connections between northeast Africa and Arabia, and the paleogeography of southern Gondwana where Africa occupied centre stage. The Precambrian fossil record, the transitions from reptiles to the earliest mammals and dinosaurs, and the evolution of Man are among Africa's unique contributions to the history of life and the story of organic evolution. Although it lies today in the tropics Africa was the theatre of the Earth's most-spectacular glaciations. Even after the scene of continental glaciation had shifted to the northern continents only lately during the Pleistocene, Africa still witnessed spectacular climatic fluctuations during the Quaternary. Certainly students of archeology and paleoanthropology cannot overlook the Quaternary paleoenvironmental record of the Olduvai Gorge in Tanzania, the Lake Turkana basin in Kenya, the Nile valley, the Sahara, and southern Africa. But since African examples have already been cited in standard geologic textbook, I have often been asked why it has become necessary to revive the idea of a full-length textbook on African geology, 30 years after this idea was abandoned by the geologic community. My simple answer, as already stated, is that the wealth of available geologic information about Africa is so enormous and fascinating, but so diffuse, that an attempt must be made to assemble and pass on this knowledge.

Description / Table of Contents: INTRODUCTION While the complex mechanical properties of rocks and soils are studied for quite a while, it is only in the last decades that sound established mathematical models were developed based on accurate experimental data. Some rheological properties of geomaterials as for instance creep, were studied for a long time but the experimental data reported were incomplete and, as a consequence, the models developed have missed either the generality necessary for the solving of engineering problems or some of the major specific mechanical properties possessed by these materials as for instance dilatancy and/or compressibility , long term damage etc. Generally, these very particular empirical models were made for a specific test only and therefore are not appropriate for solving problems involving general loading histories. Let us remind that due to the presence of a great number of cracks and/or pores existing in roks and soils, the mechanical behaviour of geomaterials is quite distinct from that of other materials as for instance metals or plastics. That is why rock and soil rheology has some specific aspects. It must also be mentioned that the solving of various problems of rock and soil mechanics posed by modern technology was not possible by using time-independent models, thus the study and development of rehological models become absolutely necessary. In the last decade or so, very accurate experimantal data became available as a result of the development of experimental techniques and of the growing interest for this field of research in the scientific community. These data, in turn, have made possible the development of genuine models for geomaterials, mainly rheological models, able to describe such properties as creep, dilatancy and/or compressibility during creep, long term damage and failure occurring after various time intervals, slip surface formation etc. Today it is clear that no accurate constitutive equation for rocks can be formulated unless the dilatancy phenomena and the time effects are not included. Another idea is the need of a better description of the concepts of damage and failure of rocks, again using in someway the concepts of irreversible dilatancy or another related notion. In soil rheology it is clear that the scale effect may be taken into consideration in order to obtain a corect information from the routine tests. Also in writing the constitutive equations for soils it is neccessary to take into account the microscopic or local phenomena, because there is a great variety of types of saturated or nonsaturated soils, granular or cohesionless soil etc. The aim of the Euromech Colloquium 196 devoted to Rock and Soil Rheology and therefore that of the present volume too, is to review some of the main results obtained in the last years in this field of research and also to formulate some of the major not yet solved problems which are now under consideration. Exchange of opinions and scientific discussions are quite helpful mainly in those areas where some approaches are controversial and the progress made is quite fast. That is especially true for the rheology of geomaterials, domain of great interest for mining and petroleum engineers, engineering geology, seismology, geophlsics, civil engineering, nuclear and industrial waste storage, geothermal energy storage, caverns for sports, culture, telecommunications, storage of goods and foodstuffs (cold, hot and refrigerated storages), underground oil and natural gas reservoirs etc. Some of the last obtained results are mentioned in the present volume...

Description / Table of Contents: PREFACE During the last few years, evaporites have increasingly been regarded as sediments and not only as chemical precipitates. Especially the intensive study of the Zechstein facies has resulted in a vast amount of observations and interpretations which are of general significance, offering important information to all sedimentologists interested in carbonates and evaporites. It seems therefore useful to introduce the sedimentological approach in a basin where various chemical concepts have been developed. This is the aim of the present volume, and this approach will be recognized by the reader in most of the chapters. The idea of publishing a collection of papers on the Zechstein facies and related rocks found an enthusiastic response, although later some contributors were, for various reasons, unable to meet the deadline. However, the papers submitted cover all major fields and will certainly stimulate further research...

Description / Table of Contents: PREFACE In a densily populated industrialized country, waste disposal must be compatible with the requirements of the environment. This is one of the indispensable requirements to guarantee an effective protection of the environment. In the past years the waste disposal industry has been given increasing attention by the general public as well as the authorities. This confirms the necessity of adapting the quality of waste disposal to the technological standard of the production. While in the past, waste disposal performance was more or less evaluated in terms of short-term costs, there is at present a reorientation in the direction of a science-based waste disposal industry. These new tendencies are taking into account ecological factors as well as the long-term consequences - i.e., for decades and centuries to come - of waste disposal methods. In this light, particular attention is given to the depositing of residues whose utilization does not appear meaningful from an ecological point of view, or would require disproportionate ressources. It is an important concern of the Federal Authorities to encourage the rapid materialization of disposal solutions which can function as ultimate deposits, and which will therefore cause neither water pollution nor gaseous emissions. In view of this goal it is necessary to establish criteria and regulations for the wastes to be deposited as well as for the characteristics of the deposits. This field confronts science with an urgent but rewarding challenge and calls for close collaboration between many different specialized disciplines...

Description / Table of Contents: PREFACE The suggestion to compile and publish this volume dealing with some geoscientific problems of the Central Andes came up during a conference on "Mobility of Active Continental Margins" held in Berlin, February 1986. At this international conference, organized by the Berlin Research Group "Mobility of Active Continental Margins", colleagues from Europe, Southern and Northern America reported on their current investigations in the Central Andes. The Central Andes claim a special position in the 7000 km long Andean mountain range. In Northern Chile, Southern Bolivia and Northwest Argentina the Central Andes show their largest width with more than 650 km and along a Geotraverse between the Pacific coast and the Chaco all typical Andean morphotectonic units are well developed. Here, the pre-Andean evolution is documented by outcropping of Paleozoic and pre-Cambrian rocks. The characteristic phenomena of the Andean cycle can be studied along the entire geotraverse. The migration of the tectonic and magmatic activity starting in Jurassic and being active t i l l Quaternary is clearly evidenced. Besides the Himalaya, the Central Andes show with 70-80 km and -400 mgal the largest crustal thickness known in mountain ranges. These and many other interesting and exciting geoscientific features encouraged a group of geoscientists from both West-Berlin universities (Freie UniversitAt and Technische UniversitAt) to focus their studies along a geotraverse through the Central Andes. The realization of these studies would not have been possible without the active assistance and close cooperation of our colleagues from the geoscientific institutions in Salta (Argentina), La Paz and Santa Cruz (Bolivia) and Antofagasta and Santiago (Chile). Concerning the German participation, this joint and interdisciplinary project is financially supported since 1982 as Reserach Group" Mobility of Active Continental Margins" by the German Research Society and by the West-Berlin universities as well. A number of colleagues from universities in West Germany take part in this project, too. The papers presented here deal with the period from Late Precambrian up to the youngest phenomena in Quaternary. The contributions cover the whole spectrum of geoscientific research, geology, paleontology, petrology, geochemistry, geophysics and geomorphology. In conclusion, the data published here may help to improve the picture of Andean structure and evolution. The detailed investigations carried out in the past years show, that the first simple plate tectonic models proposed in the beginning of the seventies have to improved and modified. Furthermore, the results can be seen as contribution to the international Lithospheric Project and as a useful data base for the construction of a Central Andean Transect...

Description / Table of Contents: PREFACE Turbidity currents have been comprehensively studied in the past although much remains unknown about both their flow characteristics and resultant sedimentary deposits. Much of this uncertainty arises from the catastrophic nature of their formation which makes them difficult to study in the environment, and has resulted in the majority of studies being experimental or theoretical. Experiments have shown that reversals in the flow of density currents can be associated with the generation of internal solitary waves. This is in contrast to the belief held by many workers that the reversal of a turbidity current simply generates an identical flow travelling in the opposite direction. This book arose from the need for a detailed experimental study to examine the effects and to consider the consequences of density current reversals from a variety of obstructions to their flow. The first part of this book comprises a detailed review of literature covering the fluid dynamics and sedimentology relevant to the experimental study (chapter one). Chapter two presents the results from the comprehensive experimental programme which are discussed and compared with appropiate theoretical hypotheses. This permits the synthesis of a model for the general features of flows that result from the incidence of density currents upon obstructions to the flow. The application of this model to both modern and ancient turbidite systems is then discussed in chapter three. This book is suitable for earth scientists with an interest in the dynamics of turbidity currents. In addition, workers from other fields such as applied maths, meteorology and engineering who have an interest in density currents and bores in practical situations may find it useful...

Description / Table of Contents: PREFACE The application of thermal analysis to earth science has a long history. This is evidenced by the extensive coverages by Mackenzie (1957, 1970), Langier-Kuzniarowa (1967), Schultze (1971), Liptay (t973), Smykatz- Kloss (1974), Todor (1976) and Heide (1982). The chief thermal method has been differential thermal analysis (DTA). Additionally, thermogravimetry (TG; Duval, 1963; Keattch, 1969; Earnest, 1988) and thermodilatometry (Schomburg & Strörr, 1984) have gained some importance. All these methods are still widely ltsed. But recently several new techniques have gained attention, such as thermomagnetometry, thermomechanical analysis and thermosonimetry. Improved equipment made possible the application of thermal methods to problems in thermodynamics and kinetics (e.g. by means of differential scanning calorimetry, DSC). This progress in the construction of new instruments as well as the combination of existing methods to enable simultaneous determinations (e.g. TG/DTA; TG/IR spectroscopy; DTA/mass spectrometry; DTA/microscopy; high-pressure DTA) have led to a resurgence in the use and application of thermal analysis in the earth sciences. Here the applications cover such diverse areas as the examination of individual minerals, mineral mixtures, rocks, soils, ceramics, cements, raw materials as well as their industrial evaluation, performance assessment and quality control. In the field of solid fossil fuels thermal determinations range from proximate analysis of inorganic constituents and the measurement of calorific values to the assessment of the environmental aspects of fly ashes and mineral residues. To support this tendency, the International Confederation for Thermal Analysis (ICTA) has recently founded a "Committee for Thermal Analysis in Geosciences". The aim of this committee shall be to discuss, improve and distribute the knowledge about the possibilities of solving geoscientific questions by means of thermal analytic methods...

Description / Table of Contents: INTRODUCTION In the context of evolutionary studies, it is the privilege of paleontologists to trace the actual course of evolutionary change over time spans that are adequate for such a slow process. At the same time it is their crux that they can not always hope to do this with the resolution necessary to reveal the causal relationships involved. The Tübingen Sonderforschungsbereich 53, "Palökologie", was primarily geared to study the interrelationships between organisms and environments in the fossil record. As is pointed out in this volume, such an approach will necessarily emphasize the static aspect of this relationship, all the more since this is what we need for the practical purposes of facies recognition. This was clone during a time interval of thirteen years at the level of individual species and taxonomic groups ("Konstruktions-Morphologie"), of characteristic facies complexes ("Fossil-Lagerstätten") and of assemblages ("Fossil- VergeseIlschaftungen") with the aim to recognize general patterns that persist in spite of the historical and evolutionary changes in the biosphere. But as our project came closer to its end, the possible causal relationships between physical and evolutionary changes became more tangible. This trend is expressed by symposia devoted to the biological effects of long term tectonic changes (KULLMANN & SCHÖNENBERG, eds., 1983) and of short term physical events (EINSELE & SEILACHER, eds., 1982). But in retrospect it appears that the time scales of the environmental changes chosen were either too large or too small to reveal the mechanisms of evolutionary response. The present volume is the outcome of a symposium of the projects B 20 ("Bankungsrhythmen in sedimentologischer, ökologischer und diagenetischer Sicht", directed by U. BAYER), D 40 ("Analoge Gehäuse-Aberrationen bei Ammonoideen", directed by J. WIEDMANN) and D 60 ("Substratwechsel im marinen Benthos", directed by A. SEILACHER) in September, 1983. tt addresses environmental changes at time scales large enough to produce more than a local ecological response and short enough to observe evolutionary and/or migratory changes at the species and genus levels. It also focusses on basins which by various degrees of isolation provided suitable sites for "evolutionary experiments", such as lakes and marginal epicontinental basins. In a way, this book is a successor of the previous one on "Cyclic and event stratification" (EINSELE & SEILACHER, eds., 1982). Small scale cycles and events are the 'primitives' of a sedimentary sequence, the lowermost scale from which it can be deciphered. However, medium and long term physical cycles commonly impress sedimentological and lithological trends on the stratigraphic column which are accompanied by faunal replacements and cycles. But since sedimentation is controlled both by physical and biological processes, which are intercorrelated in complicated ways, we also need to decode the stratigraphic text. In this effort, paleontological and sedimentological interpretation must go hand in hand. On the 'megascale' of global sea-level changes faunal and species evolution is triggered by opening and closing of migration pathways, sometimes providing us with malor biostratigraphic boundaries. As it turns out, however, integrated research and the choice of suitable scales do not free us from problems of resolution. Thus our inability to distinguish local speciation from ecophenotypic modification and from immigration in the fossil record excludes definite evolutionary answers even in well studied cases. Nevertheless we hope that this approach opens a fruitful discussion, in which stratigraphy, systematic paleontology and paleoecology will be reconciled in a concerted effort to eventually understand the evolutionary mechanisms of our biosphere.

Description / Table of Contents: The present study will provide an introduction into the biomechanics of trees and will give a critical survey of the phylogeny and the constructional principles of the tree habit. Since the trunk is considered the basic and crucial element of a tree, the analysis is largely restricted to a functional comparison of the stem anatomy of the various tree forms. It is based on the concept of constructional morphology, thus considering simultaneously the functional aspect and the ontogenetical and phylogenetical development of the various trunk types. The main questions to be answered in this study are; Why do trees exist? - Which are the constructional principles of tree trunks and when and in which group of plants do they appear? - How important are internal (phylogenetic) and external (functional, constructional) constraints? - What are the specific properties of the different constructional principles and does a correlation between trunk design and growth habit exist? - Is there a tendency in phylogeny to a better performance? The study does not (and cannot) intend to provide a detailed biophysical analysis of individual cases because experimental data on the mechanical properties of the structural elements of the different kinds of trees are still lacking. Instead, it will he the task to evaluate in a comprehensive and qualitative or semi-quantitative manner the available data of the morphology, anatomy and phylogeny of fossil and recent trees by using concepts of biomechanics and constructional morphology. Thus a somewhat holistic approach is used, which is becoming increasingly more acceptable today.

Description / Table of Contents: INTRODUCTION "The geological history, as expressed by the stratigraphic column, is basically composed of cycles of sedimentation, stratification and magmatism which correlate with relative changes in sea level determined in turn by different types of crustal movements. The classical sequence of stages "transgression - inundation - differentiation - regression - emergence" is believed to reflect the deformation phases of a geotectonic cycle" (Wezel,1988: p.37). The concept of geotectonic cycle is fundamental in geology because it links tectonics with sedimentary processes. According to Wezel (1988) the geotectonic cycle is an expression of cyclic variations in the behavior of the crust; more precisely,it is a geodynamic response to the Earth's variations in the rate of rotation (Mörner,19869 Whyte,1977~ Carey,1976).Based on a global analysis of geotectonic data, synchronous episodes of intense global swelling, governed by cyclically ordered diastrophic processes, were identified (Wezel,1985;1988). The process leading to these swells was termed krikogenesis (Wezel, 1988).It basically consists of not steady, localized, migratory vertical movements linked to mantle diapirism and concentrated in single zones.The overlying crust adjusts itself to mantle motions induced by krikogenesis, with the formation of transient troughs and swells ('touche-de-piano' tectonics).This mechanism was individuated in several areas (Wezel,1988). The history of the Earth is described by six episodes that repeat in the same way in the course of geological time.Their duration progressively decreases:the first cycle has a duration of about 200 million years, the following,younger cycles lasted 150, 115, 65, A5 and 20 m.y. ...