ALBERT

Description: While secondary plastics arising at the manufacturing and processing phases are recycled to the production process in large measure due to its high purity, the market share of secondary plastics remains low and recycling is often dominated by thermal recovery. Energetic recovery of plastics in waste electrical and electronic equipment (WEEE) has been dominating for a long time. At the same time reuse of WEEE is not well developed at EU level; with few exceptions at Member State level. Against this background we want to discuss in this book chapter several policy instruments that aim to increase the reuse of WEEE as well as the use of secondary plastics in electrical and electronic equipment. Taking the case study of Germany we evaluate instruments theoretical quantity effects and their feasibility. In reality, instruments are often weak and scattered implemented. To identify a policy mix without the risk of creating expensive policies with the potential for inefficient outcomes, we make two complementary conceptual proposes, which first open up perspectives for possible synergies of instruments and second allow an integrated understanding of the regional context in which instruments are implemented. The discussion of the case study of promoting reuse within this framework makes clear, that such an integrated understanding is the basis for any appropriate, targeted and efficient stimulation and bridges the gap between theoretical policy formulation and practically implementation.

Description: Human nutrition is responsible for about 30% of the global natural resource use. In order to decrease resource use to a level in line with planetary boundaries, a resource use reduction in the nutrition sector by a factor 2 is suggested. A large untapped potential to increase resource efficiency and improve consumers' health status is assumed, but valid indicators and general guidelines to assess these impacts and limits can barely be found. Therefore we will have a try to define sustainable limits towards the individuals' daily diet and therefore stimulate current available scientific debate. Within the paper an examination of existing indicators and assessment methods is carried out. We set the focus on health indicators, such as energy intake, and environmental indicators, such as the carbon or material footprint. The paper aims to provide first, an assessment of core indicators to explore the sustainability impact of foodstuff, and second, a deeper understanding and a discussion of sustainable limits for those dimensions of food and nutrition. Therefore we will discuss several ecological and health indicators which may be suitable to assess the sustainabilty impact and indicate differences or similarities. As a result it becomes obvious that several ecological indicators "point in the same direction" and therefore a discussion about the variability and the variety of these indicators has to be faced in the future. Further the definition of sustainable levels per indicator is an essential aspect to get an idea about the needed barriers for a sustainable nutrition, by now first steps had been made, but no binding guidelines are available yet. Therefore the paper suggests a few indications to set up sustainable levels for health and environmental indicators, based on the idea to reduce the resource use level up to 30-50% in 2030.

Description: In a globalized economy, the use of natural resources is determined by the demand of modern production and consumption systems, and by infrastructure development. Sustainable natural resource use will require good governance and management based on sound scientific information, data and indicators. There is a rich literature on natural resource management, yet the national and global scale and macro-economic policy making has been underrepresented. We provide an overview of the scholarly literature on multi-scale governance of natural resources, focusing on the information required by relevant actors from local to global scale. Global natural resource use is largely determined by national, regional, and local policies. We observe that in recent decades, the development of public policies of natural resource use has been fostered by an "inspiration cycle" between the research, policy and statistics community, fostering social learning. Effective natural resource policies require adequate monitoring tools, in particular indicators for the use of materials, energy, land, and water as well as waste and GHG emissions of national economies. We summarize the state-of-the-art of the application of accounting methods and data sources for national material flow accounts and indicators, including territorial and product-life-cycle based approaches. We show how accounts on natural resource use can inform the Sustainable Development Goals (SDGs) and argue that information on natural resource use, and in particular footprint indicators, will be indispensable for a consistent implementation of the SDGs. We recognize that improving the knowledge base for global natural resource use will require further institutional development including at national and international levels, for which we outline options.

Description: In recent years, a number of energy scenario studies which aim to advise policy makers on appropriate energy policy measures have been developed. These studies highlight changes required to achieve a future energy system that is in line with public policy goals such as reduced greenhouse gas emissions and an affordable energy supply. We argue that behavioural changes towards energy-sufficient lifestyles have considerable potential to contribute to public policy goals and may even be indispensable for achieving some of these goals. This potential should, therefore, be reflected in scenario studies aiming to provide comprehensive advice to policy makers. We analyse the role that energy-sufficient lifestyles play in prominent recent global energy scenario studies and find that these studies largely ignore the potential of possible behavioural changes towards energy-sufficient lifestyles. We also describe how such changes have been considered in several other scenario studies, in order to derive recommendations for the future development of global energy scenarios. We conclude that the inclusion of lifestyle changes in energy scenarios is both possible and useful. Based on our findings, we present some general advice for energy scenario developers on how to better integrate sufficiency into future energy scenario studies in a quantitative manner.

Description: The German federal state of North Rhine-Westphalia (NRW) is home to one of the most important industrial regions in Europe, and is the first German state to have adopted its own Climate Protection Law (CPL). This paper describes the long-term (up to 2050) mitigation scenarios for NRW’s main energy-intensive industrial sub-sectors which served to support the implementation of the CPL. It also describes the process of scenario development, as these scenarios were developed through stakeholder participation. The scenarios considered three different pathways (best-available technologies, break-through technologies, and CO2 capture and storage). All pathways had optimistic assumptions on the rate of industrial growth and availability of low-carbon electricity. We find that a policy of "re-industrialisation" for NRW based on the current industrial structures (assumed here to represent an average growth of NRWs industrial gross value added (GVA) of 1.6% per year until 2030 and 0.6% per year from 2030 to 2050), would pose a significant challenge for the achievement of overall energy demand and German greenhouse gas (GHG) emission targets, in particular as remaining efficiency potentials in NRW are limited. In the best-available technology (BAT) scenario CO2 emission reductions of only 16% are achieved, whereas the low carbon (LC) and the carbon capture and storage (CCS) scenario achieve 50% and 79% reduction respectively. Our results indicate the importance of successful development and implementation of a decarbonised electricity supply and breakthrough technologies in industry - such as electrification, hydrogen-based processes for steel, alternative cements or CCS - if significant growth is to be achieved in combination with climate mitigation. They, however, also show that technological solutions alone, together with unmitigated growth in consumption of material goods, could be insufficient to meet GHG reduction targets in industry.

Description: The German government has set itself the target of reducing the country's GHG emissions by between 80 and 95% by 2050 compared to 1990 levels. Alongside energy efficiency, renewable energy sources are set to play the main role in this transition. However, the large-scale deployment of renewable energies is expected to cause increased demand for critical mineral resources. The aim of this article is therefore to determine whether the transformation of the German energy system by 2050 ("Energiewende") may possibly be restricted by a lack of critical minerals, focusing primarily on the power sector (generating, transporting and storing electricity from renewable sources). For the relevant technologies, we create roadmaps describing a number of conceivable quantitative market developments in Germany. Estimating the current and future specific material demand of the options selected and projecting them along a range of long-term energy scenarios allows us to assess potential medium- or long-term mineral resource restrictions. The main conclusion we draw is that the shift towards an energy system based on renewable sources that is currently being pursued is principally compatible with the geological availability and supply of mineral resources. In fact, we identified certain sub-technologies as being critical with regard to potential supply risks, owing to dependencies on a small number of supplier countries and competing uses. These sub-technologies are certain wind power plants requiring neodymium and dysprosium, thin-film CIGS photovoltaic cells using indium and selenium, and large-scale redox flow batteries using vanadium. However, non-critical alternatives to these technologies do indeed exist. The likelihood of supplies being restricted can be decreased further by cooperating even more closely with companies in the supplier countries and their governments, and by establishing greater resource efficiency and recyclability as key elements of technology development.

Description: Replacing traditional technologies by renewables can lead to an increase of emissions during early diffusion stages if the emissions avoided during the use phase are exceeded by those associated with the deployment of new units. Based on historical developments and on counterfactual scenarios in which we assume that selected renewable technologies did not diffuse, we conclude that onshore and offshore wind energy have had a positive contribution to climate change mitigation since the beginning of their diffusion in EU27. In contrast, photovoltaic panels did not pay off from an environmental standpoint until very recently, since the benefits expected at the individual plant level were offset until 2013 by the CO2 emissions related to the construction and deployment of the next generation of panels. Considering the varied energy mixes and penetration rates of renewable energies in different areas, several countries can experience similar time gaps between the installation of the first renewable power plants and the moment in which the emissions from their infrastructure are offset. The analysis demonstrates that the time-profile of renewable energy emissions can be relevant for target-setting and detailed policy design, particularly when renewable energy strategies are pursued in concert with carbon pricing through cap-and-trade systems.

Description: The objective of this paper is to recognize and categorize the various ways that ecosystem services researchers perceive the concept and purpose of ecosystem services (ES). To do so, we employed the discourse analysis approach of Q methodology, where 33 researchers ranked 39 statements on ES derived from the literature. Factor analysis of the Q sorts allowed for the interpretation of five main perspectives on ES: a pragmatic view on nature conservation, seeing ES as useful tool ("Non-Economic Utilitarian"), a strongly value-focused perspective with a skeptical view on ES ("Critical Idealist"), an opposition to a utilitarian approach to nature conservation but seeing ES as more encompassing approach ("Anti-Utilitarian"), a focus on a methodological rather than a critical approach to ES ("Methodologist"), and a rather economic approach to environmental decision-making, in which ES is a useful tool ("Moderate Economist"). We see this plurality as illustrating both the potential of the ES concept to serve as a boundary object for collaboration, but also the threat of ineffective collaboration due to the lack of a common conceptual ground. However, as pluralism can be fruitful if handled transparently, we suggest the need for open dialogue about underlying assumptions when using a value-laden concept like ES.

Description: In order to analyse the mid- and long-term impacts of energy related policies, different modelling approaches can be derived. However, the results of even the best energy system model will highly depend on the underlying input data. First, in this contribution the importance and availability issues of grid data in the context of energy system modelling are highlighted. Second, this paper focuses on power grid modelling based on open and publicly available data from OpenStreetMap using open source software tools. Two recent approaches developed to build electrical transmission network models using openly available data sources are presented and discussed. The proposed methods provide transparent assumptions, simplifications and documentation of grid modelling. This results in the ability of scientists and other stakeholders to validate, discuss or reproduce the results of energy system models. Thus the new open approaches offer a unique opportunity to increase transparency, comparability and reproducibility of results in energy system modelling.

Description: A GAIA special issue will focus on reflections and empirical insights regarding real-world laboratories. In order to bring the growing research community together and to combine empirical evidence, the guest editors hereby invite colleagues to submit papers.

Description: Previous studies showed that using carbon dioxide (CO2) as a raw material for chemical syntheses may provide an opportunity for achieving greenhouse gas (GHG) savings and a low-carbon economy. Nevertheless, it is not clear whether carbon capture and utilization benefits the environment in terms of resource efficiency. We analyzed the production of methane, methanol, and synthesis gas as basic chemicals and derived polyoxymethylene, polyethylene, and polypropylene as polymers by calculating the output-oriented indicator global warming impact (GWI) and the resource-based indicators raw material input (RMI) and total material requirement (TMR) on a cradle-to-gate basis. As carbon source, we analyzed the capturing of CO2 from air, raw biogas, cement plants, lignite-fired power, and municipal waste incineration plants. Wind power serves as an energy source for hydrogen production. Our data were derived from both industrial processes and process simulations. The results demonstrate that the analyzed CO2-based process chains reduce the amount of GHG emissions in comparison to the conventional ones. At the same time, the CO2-based process chains require an increased amount of (abiotic) resources. This trade-off between decreased GHG emissions and increased resource use is assessed. The decision about whether or not to recycle CO2 into hydrocarbons depends largely on the source and amount of energy used to produce hydrogen.

Description: Research on sustainability transitions has expanded rapidly in the last ten years, diversified in terms of topics and geographical applications, and deepened with respect to theories and methods. This article provides an extensive review and an updated research agenda for the field, classified into nine main themes: understanding transitions; power, agency and politics; governing transitions; civil society, culture and social movements; businesses and industries; transitions in practice and everyday life; geography of transitions; ethical aspects; and methodologies. The review shows that the scope of sustainability transitions research has broadened and connections to established disciplines have grown stronger. At the same time, we see that the grand challenges related to sustainability remain unsolved, calling for continued efforts and an acceleration of ongoing transitions. Transition studies can play a key role in this regard by creating new perspectives, approaches and understanding and helping to move society in the direction of sustainability.

Description: New options are needed to reduce the impact of motor vehicles on climate change and declining fossil fuel resources. Cars which are fueled by hydrogen could be a sustainable method of transportation if suitable technologies can be devised to produce hydrogen in an environmentally benign manner along with the provision of the necessary fueling infrastructure. This paper assesses size, space, and cost requirements of bioreactors as a decentralized option to supply hydrogen powered cars with biohydrogen produced from algae or cyanobacteria on a theoretical basis. Decentralized supply of biohydrogen could help to reduce the problems that hydrogen cars face regarding market penetration. A feasibility study for decentralized biohydrogen production is conducted, taking the quantity of hydrogen which is needed to fuel current hydrogen cars into account. While this technology is, in theory, feasible, sizes, and costs of such reactors are currently too high for widespread adoption. Thus, more R&D is needed to close the gap and to approach marketability.

Description: Energy systems across the globe are going through a radical transformation as a result of technological and institutional changes, depletion of fossil fuel resources, and climate change. At the local level, increasing distributed energy resources requires that the centralized energy systems be re-organized. In this paper, the concept of Integrated community energy systems (ICESs) is presented as a modern development to re-organize local energy systems to integrate distributed energy resources and engage local communities. Local energy systems such as ICESs not only ensure self-provision of energy but also provide essential system services to the larger energy system. In this regard, a comparison of different energy system integration option is provided. We review the current energy trends and the associated technological, socio-economic, environmental and institutional issues shaping the development of ICESs. These systems can be applied to both developed and developing countries, however, their objectives, business models as well as composition differs. ICESs can be accepted by different actors such as local governments, communities, energy suppliers and system operators as an effective means to achieve sustainability and thereby will have significant roles in future energy systems.

Description: In the future, the capacities of renewable SNG (synthetic natural gas) will expand significantly. Pilot plants are underway to use surplus renewable power, mainly from wind, for electrolysis and the production of hydrogen, which is methanated and fed into the existing gas pipeline grid. Pilot projects aim at the energetic use of SNG for households and transport in particular for gas fueled cars. Another option could be the use of SNG as feedstock in chemical industry. The early stage of development raises the question of whether SNG should be better used for mobility or the production of chemicals. This study compares the global warming potential (GWP) of the production of fossil natural gas (NG) and carbon-dioxide (CO2)-based SNG and its use for car transport versus chemical use in the form of synthesis gas. Since the potential of wind energy for SNG production is mainly located in northern Germany, the consequences by a growing distance between production in the North and transport to the South of Germany are also examined. The results indicate that CO2-based SNG produced with wind power would lead to lower GWP when substituting NG for both uses in either transport or chemical production. Differences of the savings potential occur in short-distance pipeline transport. The critical factor is the energy required for compression along the process chain.

Description: This article presents an integrated assessment conducted in order to explore whether carbon capture and storage (CCS) could be a viable technological option for significantly reducing future CO2 emissions in South Africa. The methodological approach covers a commercial availability analysis, an analysis of the long-term usable CO2 storage potential (based on storage capacity assessment, energy scenario analysis and source-sink matching), an economic and ecological assessment and a stakeholder analysis. The findings show, that a reliable storage capacity assessment is needed, since only rough figures concerning the effective capacity currently exist. Further constraints on the fast deployment of CCS may be the delayed commercial availability of CCS, significant barriers to increasing the economic viability of CCS, an expected net maximum reduction rate of the power plant's greenhouse gas emissions of 67%-72%, an increase in other environmental and social impacts, and low public awareness of CCS. One precondition for opting for CCS would be to find robust solutions to these constraints, taking into account that CCS could potentially conflict with other important policy objectives, such as affordable electricity rates to give the whole population access to electricity.

Description: Insulating existing buildings offers great potential for reducing greenhouse gas emissions and meeting Germany's climate protection targets. Previous research suggests that, since homeowners' decision-making processes are inadequately understood as yet, today's incentives aiming at increasing insulation activity lead to unsatisfactory results. We developed an agent-based model to foster the understanding of homeowners' decision-making processes regarding insulation and to explore how situational factors, such as the structural condition of houses and social interaction, influence their insulation activity. Simulation experiments allow us furthermore to study the influence of socio-spatial structures such as residential segregation and population density on the diffusion of renovation behavior among homeowners. Based on the insights gained, we derive recommendations for designing innovative policy instruments. We conclude that the success of particular policy instruments aiming at increasing homeowners' insulation activity in a specific region depends on the socio-spatial structure at hand, and that reducing financial constraints only has a relatively low potential for increasing Germany's insulation rate. Policy instruments should also target the fact that specific renovation occasions are used to undertake additional insulation activities, e.g. by incentivizing lenders and craftsmen to advise homeowners to have insulation installed.

Description: De-industrialization, climate and demographic changes are only a few key words that indicate the challenge of urban development in many industrialized countries for the coming decades. A fundamental transformation of infrastructure and the built environment is expected to adjust to future needs. Numerous concepts of integrating efficiency and renewable energy sources into urban planning were elaborated in recent years. Energy sufficiency in the meaning of voluntary demand reduction of energy intensive goods and services is the third and mostly forgotten pillar of sustainable development. However, organizational and spatial measures are needed to support behavior modification. This paper presents results of a transdisciplinary research design with local stakeholders and scientific experts to develop an understanding of what energy sufficiency might contribute to sustainable urban development. Based on the Multi-Level-Perspective of the transition research approach, it analyzes how stakeholders and experts define energy sufficiency structures for the shrinking district of Vohwinkel (Germany). The paper also shows a compilation and evaluation of measures which facilitate energy sufficient behavior in the fields of space heating and passenger transport on a local level. The methodological concept comprises expert interviews, thought experiments with stakeholders to develop a vision of an "energy sufficient Vohwinkel 2050" as well as a stakeholder workshop to discuss the results. A shrinking population is seen as a chance to actively adapt the built environment to foster energy sufficiency.

Description: The adverse environmental impacts from inefficient building construction increase if measures to reduce energy and resource use, through stringent building policies and efficient technology, are not implemented in developed and developing countries. To illustrate a holistic approach to reducing buildings' energy and resources, the comparison of energy efficient and green buildings in terms of their technological aspects and their policy context in developed and developing countries, mainly in Europe, the USA and India, is presented together with a policy package recommendation for Nepal. A quality review of multiple literature sources, supported by various expert opinions, were the methods used for this in-depth analysis. It discusses that mandatory building standards, voluntary labels, information instruments and financial incentives are the most effective combination for the shift towards market transformation, that results in a higher share of energy efficient and green buildings. The lesson such as higher compliance with, and enforcement of, building energy standards can be seen in developed countries (e.g. Germany). Looking at a building's life cycle perspective, it is not sufficient to focus solely on operational energy reduction in higher energy efficient buildings as this is achieved by the increased use of energy intensive materials. Green requirements must be considered in updating building energy standards and labels, particularly for developed countries. Green building certification will also become more effective when the stringency of energy standards is higher and when the whole building life cycle assessment is considered. Due to the increasing scarcity of energy and resources, many developing countries are forced to face up to the need for holistic green buildings. Although baseline standards are not as high as in most developed countries and national financial support is low, the gradual move towards making the standards more stringent and incorporating the wider scope of resource saving are positive developments in developing countries (e.g. India). However, to achieve significant success, strategies must include the establishment of a suitable funding environment, a political commitment and a strong government vision for long term and sustainable building construction. The challenges faced by Nepal are even greater due to the fast pace of urban growth and the absence of energy and resource efficient buildings policies, highlighting the need for an effective policy package. Overall, this dissertation demonstrates how energy efficient and green buildings are interlinked. Green buildings reinforced with higher levels of energy efficiency and energy efficient buildings incorporating green requirements are stepping-stones for achieving greater building energy and resource efficiencies. And a suitable policy package fosters its development.

Description: Biodiversity loss is widely recognized as a serious global environmental change process. While large-scale metal mining activities do not belong to the top drivers of such change, these operations exert or may intensify pressures on biodiversity by adversely changing habitats, directly and indirectly, at local and regional scales. So far, analyses of global spatial dynamics of mining and its burden on biodiversity focused on the overlap between mines and protected areas or areas of high value for conservation. However, it is less clear how operating metal mines are globally exerting pressure on zones of different biodiversity richness; a similar gap exists for unmined but known mineral deposits. By using vascular plants' diversity as a proxy to quantify overall biodiversity, this study provides a first examination of the global spatial distribution of mines and deposits for five key metals across different biodiversity zones. The results indicate that mines and deposits are not randomly distributed, but concentrated within intermediate and high diversity zones, especially bauxite and silver. In contrast, iron, gold, and copper mines and deposits are closer to a more proportional distribution while showing a high concentration in the intermediate biodiversity zone. Considering the five metals together, 63% and 61% of available mines and deposits, respectively, are located in intermediate diversity zones, comprising 52% of the global land terrestrial surface. 23% of mines and 20% of ore deposits are located in areas of high plant diversity, covering 17% of the land. 13% of mines and 19% of deposits are in areas of low plant diversity, comprising 31% of the land surface. Thus, there seems to be potential for opening new mines in areas of low biodiversity in the future.

Description: Objective: The aim of the present article is to conduct an integrated assessment in order to explore whether CCS could be a viable technological option for significantly reducing future CO2 emissions in India. Methods: In this paper, an integrated approach covering five assessment dimensions is chosen. However, each dimension is investigated using specific methods (graphical abstract). Results: The most crucial precondition that must be met is a reliable storage capacity assessment based on site-specific geological data since only rough figures concerning the theoretical capacity exist at present. Our projection of different trends of coal-based power plant capacities up to 2050 ranges between 13 and 111 Gt of CO2 that may be captured from coal-fired power plants to be built by 2050. If very optimistic assumptions about the country's CO2 storage potential are applied, 75 Gt of CO2 could theoretically be stored as a result of matching these sources with suitable sinks. If a cautious approach is taken by considering the country's effective storage potential, only a fraction may potentially be sequestered. In practice, this potential will decrease further with the impact of technical, legal, economic and social acceptance factors. Further constraints may be the delayed commercial availability of CCS in India, a significant barrier to achieving the economic viability of CCS, an expected net maximum reduction rate of the power plant’s greenhouse gas emissions of 71-74%, an increase of most other environmental and social impacts, and a lack of governmental, industrial or societal CCS advocates. Conclusion and practice implications: Several preconditions need to be fulfilled if CCS is to play a future role in reducing CO2 emissions in India, the most crucial one being to determine reliable storage capacity figures. In order to overcome these barriers, the industrialised world would need to make a stronger commitment in terms of CCS technology demonstration, cooperation and transfer to emerging economies like India. The integrated assessment might also be extended by a comparison with other low-carbon technology options to draw fully valid conclusions on the most suitable solution for a sustainable future energy supply in India.

Description: The global demand for timber is increasing, with prognoses for the EU showing particularly high growth to meet renewable energy targets. However, there are limited options to meet rising timber demands within the EU, and global land competition to meet world food, energy and material needs, as well as to conserve high value nature areas, is increasing. This dissertation addresses the knowledge gap between the pressures of increased land use abroad and the underlying drivers of land use change. It argues that there is a high risk of problem shifting if EU policies to increase timber consumption are not accompanied by a monitoring system that accounts for consumption levels and provides a benchmark for sustainability.

Description: "Energiewende", which roughly translates as the transformation of the German energy sector in accordance with the imperatives of climate change, may soon become a byword for the corresponding processes most other developed countries are at various stages of undergoing. Germany's notable progress in this area offers valuable insights that other states can draw on in implementing their own transitions. The German state of North Rhine-Westphalia (NRW) is making its own contribution to achieving the Energiewende's ambitious objectives: in addition to funding an array of "clean and green" projects, the Virtual Institute Power to Gas and Heat was established as a consortium of seven scientific and technical organizations whose aim is to inscribe a future, renewable-based German energy system with adequate flexibility. Thus, it is tasked with conceiving of and evaluating suitable energy path options. This paper outlines one of the most promising of these pathways, which is predicated on the use of electrolytically-produced hydrogen as an energy storage medium, as well as the replacement of hydrocarbon-based fuel for most road vehicles. We describe and evaluate this path and place it in a systemic context, outlining a case study from which other countries and federated jurisdictions therein may draw inspiration.

Description: A continuing trend of global urbanization leads to a geographical concentration of population and social activities that causes a regional compression of concomitant resource and energy consumption. This paper argues that a Sustainable Living Lab infrastructure (SusLab) in urban areas facilitates a systematic integration of user's consideration in the design and development of Product-Service Systems (PSS) that enables changes of daily routines in favor of urban wealth development and conservation of ecosystem services. The authors build on the Sustainable Consumption and Production (SCP) Model of the Wuppertal Institute that provides a theoretical framework of sociotechnical rearrangements towards urban sustainability transition. Therefore, a reconfiguration of social practices and PSS in a desired direction according to social, ecological and economic concerns is reconsidered on the micro level in line with efficiency, consistency, and sufficiency strategies. The authors introduce an assessment framework for urban sustainable development and illustrate multifarious concepts of PSS that are aiming to decouple wealth development from resource and energy consumption in urban areas.

Description: Energy system optimization models (ESOMs) such as MARKAL/TIMES are used to support energy policy analysis worldwide. ESOMs cover the full life-cycle of fuels from extraction to end-use, including the associated direct emissions. Nevertheless, the life-cycle emissions of energy equipment and infrastructure are not modelled explicitly. This prevents analysis of questions relating to the relative importance of emissions associated with the build-up of infrastructure and other equipment required for decarbonization.

Description: How is it possible to increase homeowners' insulation activity? Answering this question is key to successful policies regarding energy-efficient buildings worldwide. In Germany, doubling today's insulation rate of about 1% is an important element for reaching the government's target of an 80% reduction in energy demand in the building sector by 2050. This thesis uses an agent-based model analysis to improve the understanding of homeowners' insulation activity and to explore new approaches aiming at its increase in Germany. Two agent-based models were developed and utilized. The first model was developed mainly based on insights derived from a structured literature review. The second emerged from the previous one, incorporating the results of an online survey conducted among 275 homeowners. The results indicate that homeowners' economic means have little influence on their decision to install insulation. Instead, their insulation decision-making is mostly affected by situational factors and their attitudes towards insulation. Situational factors, such as the condition of the building, are important because they initiate homeowners' individual decision-making processes on insulation. The simulation results show that improving homeowners’ attitudes about insulation by providing information has a comparatively low potential for increasing their insulation activity. Out of the policy options this thesis explored, the introduction of an obligation to insulate the walls within one year after change of house ownership was found to have the greatest impact on homeowners' insulation activity.

Description: Since human nutrition is responsible for about 30 % of the global natural resource use and in order to decrease resource use to a level in line with planetary boundaries, Lukas et al. (2016) proposed a re-source use reduction in the nutrition sector by a factor 2 (Material Footprint). The catering sector needs clearly defined indicators to assess their business activities' impact on ecology, social aspects, economic value, and health status. Within the project NAHGAST two sets of indicators, called NAHGAST Meal-Basis and NAHGAST Meal-Pro were developed. The indicator sets are proposed to measure several, with sustainability-associated challenges, such as such as the ecological, social and economical effects, which may come along with the production and the consumption of a meal. Basically, the NAHGAST Meal-Basis deals with qualitative indicators, such as the amount of organic food per serving or the percentage of food wasted. This set is supposed to enable leaders to assess the sustainability of their meals and to visualize future improvements on a simplistic level. The NAHGAST Meal-Pro deals with a more sophisticated set of indicators, such as the carbon and material footprint or the cost recovery per meal. Both sets are underpinned with sus-tainable targets and elaborated as an Excel-based assessment tool, which is tested within a one-year case study. The usefulness and the limits of the tool, as well as current results of the implementation including pro-posed challenges, are discussed.

Description: Food labels are able to support consumers in making more sustainable food choices in out-of-home consumption situations. Thereby, the effect of changing consumption behaviour depends on the format of food labels and on the information it provides. In order to assess the importance of the amount of information as well as the design of food labels displaying sustainability aspects, we test different formats of food labels using a best-worst choice design. So far, no research tested a variation of information depth while keeping label designs fixed. We find clear preferences across both dimensions. Results indicate that consumers regard labels with a higher information depth as more helpful in order to choose a sustainable meal. For the label design it became obvious that the slider-design is preferred over footprints and traffic light label design.

Description: The growing demand for wood to meet EU renewable energy targets has increasingly come under scrutiny for potentially increasing EU import dependence and inducing land use change abroad, with associated impacts on the climate and biodiversity. This article builds on research accounting for levels of primary timber consumption - e.g., toward forest footprints - and developing reference values for benchmarking sustainability - e.g., toward land use targets - in order to improve systemic monitoring of timber and forest use. Specifically, it looks at future trends to assess how current EU policy may impact forests at an EU and global scale. Future demand scenarios are based on projections derived and adapted from the literature to depict developments under different scenario assumptions. Results reveal that by 2030, EU consumption levels on a per capita basis are estimated to be increasingly disproportionate compared to the rest of the world. EU consumption scenarios based on meeting around a 40% share of the EU renewable energy targets with timber would overshoot both the EU and global reference value range for sustainable supply capacities in 2030. Overall, findings support literature pointing to an increased risk of problem shifting relating to both how much and where timber needed for meeting renewable energy targets is sourced. It is argued that a sustainable level of timber consumption should be characterized by balance between supply (what the forest can provide on a sustainable basis) and demand (how much is used on a per capita basis, considering the concept of fair shares). To this end, future research should close data gaps, increase methodological robustness and address the socio-political legitimacy of the safe operating space concept towards targets in the future. A re-use of timber within the economy should be supported to increase supply options.

Description: The Port of Rotterdam is an important industrial cluster, comprising mainly oil refining, chemical production and power generation. In 2016, the port's industry accounted for 19% of the Netherlands' total CO2 emissions. The Port of Rotterdam Authority is aware that the cluster is heavily exposed to future decarbonisation policies, as most of its activities focus on trading, handling, converting and using fossil fuels. Based on a study for the Port Authority using a mixture of qualitative and quantitative methods, our article explores three pathways whereby the port's industry can maintain its strong position while significantly reducing its CO2 emissions and related risks by 2050. The pathways differ in terms of the EU's assumed climate change mitigation ambitions and the key technological choices made by the cluster's companies. The focus of the paper is on identifying key risks associated with each scenario and ways in which these could be mitigated.

Description: The effectiveness of sustainable product and service innovations is often restricted by limited market acceptance or unexpected consumption patterns. The latter includes rebound effects, which occur when resources liberated by savings are used for further consumption. Recently emerging research from the Living Lab is striving to address and anticipate challenges in innovation design by integrating users in prototyping and field testing product and service innovations. The paper presents findings from a literature review on rebound effects and expert interviews identifying methods to monitor and measures to mitigate rebound effects in early innovation design via Living Lab research. We find that monitoring and mitigating rebound effects in Living Lab research includes technological and behavioural triggers as well as socio-psychological and time use effects in addition to economic re-spending effects. The experts have confirmed that Living Labs contain the potential to observe complex demand systems of users within experimental designs, encompassing indirect rebound effects in terms of expenditure as well as time use. In this respect, Living Lab research can facilitate support for sustainable innovations, which aim to encourage changes in consumer behaviour, considering re-spending and time use effects simultaneously.

Description: The contribution of the EU bioeconomy to sustainable development depends on how it is implemented. A high innovation potential is accompanied by considerable risks, in particular regarding the exacerbation of global land use conflicts. This article argues that a systemic monitoring system capable of connecting human-environment interactions and multiple scales of analysis in a dynamic way is needed to ensure that the EU bioeconomy transition meets overarching goals, like the Sustainable Development Goals. The monitoring should be centered around a dashboard of key indicators and targets covering environmental, economic, and social aspects of the bioeconomy. With a focus on the land dimension, this article examines the strengths and weakness of different economic, environmental and integrated models and methods for monitoring and forecasting the development of the EU bioeconomy. The state of research on key indicators and targets, as well as research needs to integrate these aspects into existing modeling approaches, are assessed. The article concludes with key criteria for a systemic bioeconomy monitoring system.

Description: In the face of growing popularity of eco-feedback innovations, recent studies draw attention to the relevance of the human factor for a more effective design of eco-feedback. This paper explores these challenges more deeply by employing a mixed methods approach. We provide in-situ insights from a Living Lab experiment on the effect of smart home systems and traffic light feedback on heating energy consumption in private households. Our results from an interrupted time series analysis of logged data on indoor room temperature, CO2 concentration and consumption of natural gas show that the interventions do not affect heating as expected, neither for automating behaviour via high-tech smart home systems nor via low-tech traffic light feedback. Smart home systems do not promise a significant reduction of heating energy consumption and a traffic light feedback on indoor air quality does not lead to a reaction of indoor CO2 concentrations, but may reduce heating energy consumption. Qualitative interviews on heating practices of participants suggests that comfort temperatures, lack of competences and inert heating systems do override expected effects of the feedback interventions. We propose that high-tech smart home systems should carefully consider the handling competences of users. Low-tech feedback products on the other hand should by design stronger address user experience factors like comfort temperatures.

Description: Facing an ever-increasing global consumption of natural resources and related environmental as well as socioeconomic challenges, the transition towards a circular economy will be of crucial importance. The issue is high on the political agenda, especially since the European Commission published its Circular Economy Action Plan in December 2015. Apparently different stakeholders have very different perceptions of the concept as well as different expectations for its implementation. During a workshop series by the Friedrich Ebert Stiftung, experts from policy, science, administration, industry and unions discussed key issues for the circular economy: What's the status quo in Germany? How can the circular economy be implemented in a comprehensive and efficient way? Which instruments are available? Is the legal framework on EU and national level sufficient for the evolvement of a circular economy? What is the role of the consumer? What are the economic potentials especially with regard to job creation? How can research and innovation policy contribute to this process? This paper aims to summarise the different discussions.

Description: Food is needed to maintain our physical integrity and therefore meets a most basic human need. The food sector got in the focus of environmental policy, because of its environmental implications and its inefficiency in terms of the amount of food lost along the value chain. The European Commission (EC) flagged the food waste issue a few years ago and adopted since then a series of policies that partially address the problem. Among these, the Resource Efficiency Roadmap set the aspirational goal of reducing the resource inputs in the food chain by 20% and halving the disposal of edible food waste by 2020. Focusing on consumer food waste, we tested what a reduction following the Roadmap's food waste target would imply for four environmental categories in EU28 (European Union 28 Member States): greenhouse gas emissions, land use, blue water consumption, and material use. Compared to the 2011 levels, reaching the target would lead to 2% to 7% reductions of the total footprint depending on the environmental category. This equals a 10% to 11% decrease in inputs in the food value chain (i.e., around half of the resource use reductions targeted). The vast majority of potential gains are related to households, rather than the food-related services. Most likely, the 2020 target will not be met, since there is insufficient action both at Member State and European levels. The Sustainable Development Goals provide a new milestone for reducing edible food waste, but Europe needs to rise up to the challenge of decreasing its per capita food waste generation by 50% by 2030.

Description: Sustainable Development Goal 12 (SDG 12) requires sustainable production and consumption. One indicator named in the SDG for resource use is the (national) material footprint. A method and disaggregated data basis that differentiates the material footprint for production and consumption according to, e.g., sectors, fields of consumption as well as socioeconomic criteria does not yet exist. We present two methods and its results for analyzing resource the consumption of private households based on microdata: (1) an indicator based on representative expenditure data in Germany and (2) an indicator based on survey data from a web tool. By these means, we aim to contribute to monitoring the Sustainable Development Goals, especially the sustainable management and efficient use of natural resources. Indicators based on microdata ensure that indicators can be disaggregated by socioeconomic characteristics like age, sex, income, or geographic location. Results from both methods show a right-skewed distribution of the Material Footprint in Germany and, for instance, an increasing Material Footprint with increasing household income. The methods enable researchers and policymakers to evaluate trends in resource use and to differentiate between lifestyles and along socioeconomic characteristics. This, in turn, would allow us to tailor sustainable consumption policies to household needs and restrictions.

Description: Green Information Systems in general, and footprint calculators in particular, are promising feedback tools to assist people in adopting sustainable behaviour. Therefore, a Material Footprint model for use in an online footprint calculator was developed by identifying the most important predictors of the Material Footprint of the calculator's users. By means of statistical learning, the analysis revealed that 22 of the 95 predictors identified accounted for 74% of the variance in Material Footprints. Ten predictors out of the 95, mainly from the mobility domain, were capable of showing a prediction accuracy of 61%. The authors conclude that 22 predictors from the areas of mobility, housing and nutrition, as well as sociodemographic information, accurately predict a person's Material Footprint. The short and concise Material Footprint model may help developers and researchers to enhance their information systems with additional items while ensuring the data quality of such applications.

Description: Urban energy systems have been commonly considered to be socio-technical systems within the boundaries of an urban area. However, recent literature challenges this notion in that it urges researchers to look at the wider interactions and influences of urban energy systems wherein the socio-technical sphere is expanded to political, environmental and economic realms as well. In addition to the inter-sectoral linkages, the diverse agents and multilevel governance trends of energy sustainability in the dynamic environment of cities make the urban energy landscape a complex one. There is a strong case then for establishing a new conceptualisation of urban energy systems that builds upon these contemporary understandings of such systems. We argue that the complex systems approach can be suitable for this. In this paper, we propose a pilot framework for understanding urban energy systems using complex systems theory as an integrating plane. We review the multiple streams of urban energy literature to identify the contemporary discussions and construct this framework that can serve as a common ontological understanding for the different scholarships studying urban energy systems. We conclude the paper by highlighting the ways in which the framework can serve some of the relevant communities.

Description: Digitalization is a transformation process which has already affected many parts of industry and society and is expected to yet increase its transformative speed and impact. In the energy sector, many digital applications have already been implemented. However, a more drastic change is expected during the next decades. Good understanding of which digital applications are possible and what are the associated benefits as well as risks from the different perspectives of the impacted stakeholders is of high importance. On the one hand, it is the basis for a broad societal and political discussion about general targets and guidelines of digitalization. On the other hand, it is an important piece of information for companies in order to develop and sustainably implement digital applications. This article provides a structured overview of potential digital applications in the German energy (electricity) sector, including the associated benefits and the impacted stakeholders on the basis of a literature review. Furthermore, as an outlook, a methodology to holistically analyze digital applications is suggested. The intended purpose of the suggested methodology is to provide a complexity-reduced fact base as input for societal and political discussions and for the development of new digital products, services, or business models. While the methodology is outlined in this article, in a follow-up article the application of the methodology will be presented and the use of the approach reflected.

Description: Nigeria is Africa's largest economy and home to approximately 10% of the un-electrified population of Sub-Saharan Africa. In 2017, 77 million Nigerians or 40% of the population had no access to affordable, reliable and sustainable electricity. In practice, diesel- and petrol-fuelled back-up generators supply the vast majority of electricity in the country. In Nigeria's nationally-determined contribution (NDC) under the Paris Agreement, over 60% of the greenhouse gas emissions (GHG) reductions are foreseen in the power sector. The goal of this study is to identify and critically examine the pathways available to Nigeria to meet its 2030 electricity access, renewables and decarbonization goals in the power sector. Using published data and stakeholder interviews, we build three potential scenarios for electrification and growth in demand, generation and transmission capacity. The demand assumptions incorporate existing knowledge on pathways for electrification via grid extension, mini-grids and solar home systems (SHS). The supply assumptions are built upon an evaluation of the investment pipeline for generation and transmission capacity, and possible scale-up rates up to 2030. The results reveal that, in the most ambitious Green Transition scenario, Nigeria meets its electricity access goals, whereby those connected to the grid achieve a Tier 3 level of access, and those served by sustainable off-grid solutions (mini-grids and SHS) achieve Tier 2. Decarbonization pledges would be surpassed in all three scenarios but renewable energy goals would only be partly met. Fossil fuel-based back-up generation continues to play a substantial role in all scenarios. The implications and critical uncertainties of these findings are extensively discussed.

Description: The amount of land directly disturbed by mining is a key generic environmental pressure indicator. A novel method based on the measurement of the cumulative net area disturbances using Landsat satellite images and its correlation with the cumulative ore production at the mine site was applied. Weighted disturbance rates (WDRs) were calculated indicating the annual quantity of hectares newly disturbed per million metric tons of ore extracted. Results show that open pit (OP) have a smaller average WDR (5.05 ha/Mt) than underground (UG) mines (11.85 ha/Mt). This is explained by the relation between the annual amounts of new net area disturbed and of ore extracted which is larger for UG than for OP mines due to the annual extraction volume (lower for UG). Overall findings demonstrate that bauxite mining has the highest WDR (7.98 ha/Mt), followed by gold (6.70 ha/Mt), silver (5.53 ha/Mt), copper (4.5 ha/Mt) and iron (4.25 ha/Mt).

Description: Renewable energy targets in the European Union (EU) have raised the demand for timber and are expected to increase dependence on imports. However, EU timber consumption levels are already disproportionally high compared to the rest of the world. The question is, how much timber is available for the EU to sustainably harvest and import, in particular considering sustainable forest management practices, a safe operating space for land-system change, and the global distribution of "common good" resources. This article approaches this question from a supply angle to develop a reference value range for the current as well as future sustainable supply of timber at the EU-27 and global levels. For current supply estimates, national-level data on forest area available for wood supply, productivity in that area, as well as the rate available for harvest were collected and aggregated into three potential supply scenarios. For future supply estimates, a safe operating space scenario halting land use change, a sensitivity analysis, and a literature review were performed. To provide both a comparison of global versus EU sustainable supply capacities and to develop a benchmark toward evaluating and comparing levels of consumption to sustainable supply capacities, per capita calculations were made. Results revealed that the per capita sustainable supply potential of EU forests is estimated to be around three times higher than the global average in 2050. Whether a global or EU reference value is more appropriate for EU policy orientation, considering both strengthened economic and cultural ties to the forest in forest-rich countries as well as the need to prevent problem shifting associated with exporting land demands abroad, is discussed. Further research is needed to strengthen and harmonize data, improve methods for modeling future scenarios and incorporate interdisciplinary and multi-stakeholder perspectives toward the development of robust and politically relevant reference values for sustainable consumption levels.

Description: Energy-intensive processing industries (EPIs) produce iron and steel, aluminum, chemicals, cement, glass, and paper and pulp and are responsible for a large share of global greenhouse gas emissions. To meet 2050 emission targets, an accelerated transition towards deep decarbonization is required in these industries. Insights from sociotechnical and innovation systems perspectives are needed to better understand how to steer and facilitate this transition process. The transitions literature has so far, however, not featured EPIs. This paper positions EPIs within the transitions literature by characterizing their sociotechnical and innovation systems in terms of industry structure, innovation strategies, networks, markets and governmental interventions. We subsequently explore how these characteristics may influence the transition to deep decarbonization and identify gaps in the literature from which we formulate an agenda for further transitions research on EPIs and consider policy implications. Furthering this research field would not only enrich discussions on policy for achieving deep decarbonization, but would also develop transitions theory since the distinctive EPI characteristics are likely to yield new patterns in transition dynamics.

Description: Background: Global targets for reducing resource use have been set by organizations such as the International Resource Panel and the European Commission. However, these targets exist only at the macro level, e.g., for individual countries. When conducting an environmental analysis at the micro level, resource use is often neglected as an indicator. No sum parameter indicating all abiotic and biotic raw materials has been considered for life cycle assessment, as yet. In fact, life cycle assessment databases even lack some of the specific input flows required to calculate all abiotic and biotic raw materials. In contrast, the cumulative energy demand, an input-based indicator assessing the use of energy resources, is commonly used, particularly when analyzing energy-intensive product systems. Methods: In view of this, we analyze the environmental relevance of the sum parameter abiotic and biotic raw material demand, which we call the material footprint. First, we show how abiotic and biotic raw material demand can be implemented in the Ecoinvent life cycle assessment database. Employing the adapted database, the material footprint is calculated for 12 individual datasets of chosen materials and crops. The results are compared to those of the cumulated energy demand and four selected impact categories: climate change, ozone depletion, acidification, and terrestrial eutrophication. Results: The material footprint is generally high in the case of extracted metals and other materials where extraction is associated with a large amount of overburden. This fact can lead to different conclusions being drawn compared to common impact categories or the cumulative energy demand. However, the results show that both the range between the impacts of the different materials and the trends can be similar. Conclusions: The material footprint is very easy to apply and calculate. It can be implemented in life cycle assessment databases with a few adaptions. Furthermore, an initial comparison with common impact indicators suggests that the material footprint can be used as an input-based indicator to evaluate the environmental burden, without the uncertainty associated with the assessment of emission-based impacts.

Description: Modelling studies which project pathways for the future of energy in India currently have several implicit assumptions with regards to the social, institutional, and political changes necessary for energy transitions. This paper focuses on the specific question of land use change required for realising ambitious clean energy targets. Demand for land is likely to be a critical question in India's energy future given the challenges with land acquisition in the country as a result of high population density and significant rights enjoyed by landowners. Yet, there is a lack of literature relevant to India which makes a quantitative assessment of the land use impacts of different types of low carbon technologies. I calculate and compare the land requirements in India of ground based solar photovoltaic (PV) power, nuclear power, and wind energy. All three types of technologies are expected to grow substantially as a share of India's electricity mix in the coming years. The analysis suggests that land demands of ground based solar PV are likely to be substantial compared to wind energy and nuclear power, and some policy suggestions are provided which may help mitigate that challenge.

Description: We present an approach to simulate climate and energy policy for the EU, using a flexible and modular agent-based modelling approach and a toolbox, called the Energy Modelling Laboratory (EMLab). The paper shortly reviews core challenges and approaches for modelling climate and energy policy in light of the energy transition. Afterwards, we present an agent-based model of investment in power generation that has addressed a variety of European energy policy questions. We describe the development of a flexible model core as well as modules on carbon and renewables policies, capacity mechanisms, investment behaviour and representation of intermittent renewables. We present an overview of modelling results, ongoing projects, a case study on current reforms of the EU ETS, and we show their relevance in the EU context.

Description: Sustainable out-of-home nutrition can help achieve overarching sustainability goals through a transformation in demands of consumers in this growing market. Studies indicate that individual food choice behaviours in out-of-home settings relate to a wide set of personal, social and situational factors. These factors can be influenced by various intervention strategies. In an expert meeting and a focus group we invited caterers and consumers to generate, discuss and evaluate various practical intervention ideas. Both parties largely perceive the explored ideas as useful and agree on key intervention ideas. Overall caterers and consumers state to prefer nudging strategies over information and participation interventions.

Description: The article gives insights into the implementation process of sustainable management strategies in the food service sector. Furthermore, the normative requirements for sustainability in form of a mission statement, called "sustainable food services" are presented. The authors perceive this mission statement as a means to transfer current political demands (as in the SDG of the UN) into the sector. It could serve as a model for the entire food service sector to support and facilitate implementing aspects of sustainability into business practices with the help of sustainable management tools.

Description: This paper offers a comparative analysis of small wind electrification programmes targeted at remote sheep farming households in two of the windiest regions of the world, Argentine Patagonia and the Falkland Islands/Islas Malvinas. Despite comparable environmental conditions and local livelihoods, their impact was vastly different. Insights from socio-technical systems and strategic niche management approaches offered a deeper understanding of the local context and development dynamics, facilitating the identification of the critical success factors that contributed to these two distinct outcomes and finally highlighting those that can inform the design of future such initiatives. The research is based upon a series of semi-structured interviews with key stakeholders, observational field visits and review of archival sources. The critical factors identified by this case study research include strong and consistent institutional support, investment in robust equipment creation of effective feedback loops from the field and hybridisation. Additionally, a user centred approach that assesses whether small wind is really the right option for each individual household and if so, matches an appropriate energy system to their unique and evolving needs. Finally, empowering users to take on as much responsibility for maintenance as possible by integrating maintenance practices with local culture and ensuring the support of an effective decentralised maintenance network.

Description: A significant reduction in greenhouse gas emissions will be necessary in the coming decades to enable the global community to avoid the most dangerous consequences of man-made global warming. This fact is reflected in Germany's 7th Federal Energy Research Program (EFP), which was adopted in 2018. Direct Air Capture (DAC) technologies used to absorb carbon dioxide (CO2) from the atmosphere comprise one way to achieve these reductions in greenhouse gases. DAC has been identified as a technology (group) for which there are still major technology gaps. The intention of this article is to explore the potential role of DAC for the EFP by using a multi-dimensional analysis showing the technology's possible contributions to the German government's energy and climate policy goals and to German industry's global reputation in the field of modern energy technologies, as well as the possibilities of integrating DAC into the existing energy system. The results show that the future role of DAC is affected by a variety of uncertainty factors. The technology is still in an early stage of development and has yet to prove its large-scale technical feasibility, as well as its economic viability. The results of the multi-dimensional evaluation, as well as the need for further technological development, integrated assessment, and systems-level analyses, justify the inclusion of DAC technology in national energy research programs like the EFP.

Description: Footprint calculators are efficient tools to monitor the environmental impact of private consumption. We present the results of an analysis of data entered into an online Material Footprint calculator undertaken to identify the socioeconomic drivers of the Material Footprint in different areas of consumption, from housing to holidaymaking. We developed regression models to reveal (1) the impact of socioeconomic characteristics on Material Footprints of private households and (2) correlations between the components of Material Footprints for different arrays of consumption. Our results show that an increasing Material Footprint in one array of consumption comes with an increasing Material Footprint in all other arrays, with the exception of housing and holidaymaking. The socioeconomic characteristics of users have a significant impact on their Material Footprints. However, this impact varies by the array of consumption. Households only exhibit generally bigger Material Footprints as a result of higher incomes and larger dwellings. We conclude that indicators which strive to monitor resource efficiency should survey disaggregated data in order to classify the resource use to different population groups and arrays of consumption.

Description: Nowadays, the main impetus to apply additive manufacturing (AM) of metals is the high geometric flexibility of the processes and its ability to produce pilot or small batch series. In contrast, resource and energy intensities are often not considered as constraints, even though the turnout of additive manufacturing is high, at least compared to chip removing processes. The study at hand analyses the material characteristics and environmental impacts of a hose nozzle as an example of a commercial product of simple geometry. The production routes turning (conventional manufacturing) and laser beam melting (additive manufacturing) are compared to each other in terms of natural resource use, climate change potential and primary energy demand. It is found, that the product shows a lower demand for natural resources when produced via AM, but higher carbon emissions and energy demand when using a steel, that is mainly (80%) produced from high-alloyed steel scrap. However, different case studies during the sensitivity analyses showed that a number of factors highly influence the results: the steel source as well as the source of electricity play a major role in determining the environmental performance of the production routes. The authors also found that other production processes (here cold forging of tubes) might be an eco-friendly alternative to both routes, if feasible from an economic point of view. In regard to the material characteristics, experimental testing revealed that the material advantages of AM produced hose nozzles (in particular higher yield strength) are reduced after a solution heat treatment is applied to the as-produced material, in order to increase corrosion resistance. However, products that do not require this production step might benefit from the higher yield strength, as a lower wall thickness could be realised.

Description: Responsible consumption and production is one of the Sustainable Development Goals of the United Nations. To achieve this goal the currently high extraction rates of natural resources, that our economy is based on, needs a transformation of the consumption and production system considering technological as well as social change. One of the promising transition approaches is seen in collaborative consumption with its many facets of socio-cultural innovations and fast growing number of participants and businesses. With a decreasing production of goods, due to a utilisation of underutilised assets, these offers might support an absolute reduction of the global resource use. However, a positive environmental effect depends on the setting and the social practices of such sharing offers and is not sustainable or resource efficient generally. Also, resource efficient practices with a low diffusion potential that stick in a niche offer no leverage to achieve sustainable consumption patterns. Thus, this paper describes a mixed method approach to analyse the resource efficiency and diffusion potential of 20 sharing offers in the area of mobility, housing & travel and everyday objects in Germany. Results show that the overall positive environmental connotation of sharing offers cannot be confirmed. We identified five clusters of offers that are all treated to be differently when it comes to deploying the positive potential and avoid unnecessary societal effort to achieve the mentioned Sustainable Development Goal.

Description: In recent years, most countries in the Middle East and North Africa (MENA), including Jordan, Morocco and Tunisia, have rolled out national policies with the goal of decarbonising their economies. Energy policy goals in these countries have been characterised by expanding the deployment of renewable energy technologies in the electricity mix in the medium term (i.e., until 2030). This tacitly signals a transformation of socio-technical systems by 2030 and beyond. Nevertheless, how these policy objectives actually translate into future scenarios that can also take into account a long-term perspective up to 2050 and correspond to local preferences remains largely understudied. This paper aims to fill this gap by identifying the most widely preferred long-term electricity scenarios for Jordan, Morocco and Tunisia. During a series of two-day workshops (one in each country), the research team, along with local stakeholders, adopted a participatory approach to develop multiple 2050 electricity scenarios, which enabled electricity pathways to be modelled using Renewable Energy Pathway Simulation System GIS (renpassG!S). We subsequently used the Analytical Hierarchy Process (AHP) within a Multi-Criteria Analysis (MCA) to capture local preferences. The empirical findings show that local stakeholders in all three countries preferred electricity scenarios mainly or even exclusively based on renewables. The findings demonstrate a clear preference for renewable energies and show that useful insights can be generated using participatory approaches to energy planning.

Description: Feedback devices can be used to inform households about their energy-consumption behavior. This may persuade them to practice energy conservation. The use of feedback devices can also - via word of mouth - spread among households and thereby support the spread of the incentivized behavior, e.g. energy-efficient heating behavior. This study investigates how to manage the impact of these environmental innovations via marketing. Marketing activities can support the diffusion of devices. This study aims to identify the most effective strategies of marketing feedback devices. We did this by adapting an agent-based model to simulate the roll-out of a novel feedback technology and heating behavior within households in a virtual city. The most promising marketing strategies were simulated and their impacts were analyzed. We found it particularly effective to lend out feedback devices to consumers, followed by leveraging the social influence of well-connected individuals, and giving away the first few feedback devices for free. Making households aware of the possibility of purchasing feedback devices was found to be least effective. However, making households aware proved to be most cost-efficient. This study shows that actively managing the roll-out of feedback devices can increase their impacts on energy-conservation both effectively and cost-efficiently.

Description: Following the decisions of the Paris climate conference at the end of 2015 as well as similar announcements e.g. from the G7 in Elmau (Germany) in the summer of 2015, long-term strategies aiming at (almost) full decarbonisation of the energy systems increasingly move into the focus of climate and energy policy. Deep decarbonisation obviously requires a complete switch of energy supply towards zero GHG emission sources, such as renewable energy. A large number of both global as well as national climate change mitigation scenarios emphasize that energy efficiency will likewise play a key role in achieving deep decarbonization. However, the interdependencies between a transformation of energy supply on the one hand and the role of and prospects for energy efficiency on the other hand are rarely explored in detail. This article explores these interdependencies based on a scenario for Germany that describes a future energy system relying entirely on renewable energy sources. Our analysis emphasizes that generally, considerable energy efficiency improvements on the demand side are required in order to have a realistic chance of transforming the German energy system towards 100 % renewables. Efficiency improvements are especially important if energy demand sectors will continue to require large amounts of liquid and gaseous fuels, as the production of these fuels are associated with considerable energy losses in a 100 % renewables future. Energy efficiency on the supply side will therefore differ considerably depending on how strongly the use of liquid and gaseous fuels in the various demand sectors can be substituted through the direct use of electricity. Apart from a general discussion of the role of energy efficiency in a 100 % renewable future, we also look at the role of and prospects for energy efficiency in each individual demand sector.

Description: India is currently at a crucial juncture where it is aiming for economic growth to meet the basic needs of its 1.2 billion people. However, so far this growth has resulted in energy shortages and the increasing use of limited resources. This policy brief series is about decoupling, i.e. improving efficiency to reduce the resources and energy needed for this growth and meet the country's increasing development needs. The construction sector is highly resource and energy intensive; it is therefore imperative that it moves towards a path of environmental sustainability. This transition is likely to be achieved by decoupling both resource and energy use from the sector's growth. Decision-makers in the sector will play a crucial role in achieving this. The aim of this policy brief series is to inform decision-makers in India at central government and state level about the current status of research, policy and institutions in the Indian construction sector and to identify key drivers and barriers. Finally, practical recommendations will be made for decision-makers about how to promote decoupling of resource and energy use from growth in the construction sector. Policy brief 1 focuses on the baseline for decoupling in the Indian construction sector. The study draws attention to the existing scenario in terms of key policies, research and institutions linked to resources and energy in the sector.

Description: Over the years Shell has produced a number of scenario studies on key energy issues. These have included studies on important energy consumption sectors such as passenger cars and commercial vehicles (lorries and buses) and the supply of energy and heat to private households, as well as studies on the state of and prospects for individual energy sources and fuels, including biofuels, natural gas and liquefied petroleum gas. Shell has been involved in hydrogen production as well as in research, development and application for decades, with a dedicated business unit, Shell Hydrogen. Now, in cooperation with the Wuppertal Institute in Germany, Shell has conducted a study on hydrogen as a future energy source. The study looks at the current state of hydrogen supply path- ways and hydrogen application technologies and explores the potential and prospects for hydrogen as an energy source in the global energy system of tomorrow. The study focuses on the use of hydrogen in road transport and specifically in fuel cell electric vehicles (FCEVs), but it also examines non-automotive resp. stationary applications.

Description: To minimize the impact of end-of life vehicles on the environment they have to be managed in accordance with the legal requirements. Against this background it is important to comprehend the whereabouts of permanently decommissioned passenger cars. From the available statistical sources it was only possible to account for the whereabouts in parts for the last years. The subject-matter of the research project was the closure of this "statistical gap" to the maximum extent possible. The objectives of the project were the identification of the possible reasons underlying the "statistical gap", the determination, itemisation and, to the maximum extent possible, quantification of information on the actual whereabouts of permanently decommissioned vehicles and the development of measures and instruments that can be used to permanently improve the data situation.

Description: Energy intensive industries are one of the fields in which strong increases of energy efficiency and deep decarbonisation strategies are particularly challenging. Although European energy intensive industries have already achieved significant energy and greenhouse gas reductions in the past, much remains to be done to make a significant contribution to achieving European as well as national climate mitigation targets of greenhouse gas emission reductions by -80% or more (compared to the baseline of 1990). North Rhine-Westphalia (NRW) is a European hotspot for coping with this challenge, accommodating more than 10% of the energy intensive industries of the EU28. It is also the first German state to have adopted its own Climate Law, enacting state-wide CO2 emission reductions by 80% until 2050 compared to 1990. The state government initiated the project "Platform Climate Protection and Industry North-Rhine Westphalia" to identify and develop the necessary far-reaching low carbon innovation strategies for energy intensive industries. Heart of the project was a dialogue process, which involved a broad spectrum of stakeholders from steel, chemical, aluminium, cement, glass and paper producing industries. Besides enhancing and broadening the knowledge on high efficiency and low-carbon technologies within industries, the aim was to explore possible pathways and preconditions for the application of these technologies in energy intensive industries as well as to strengthen the motivation of companies for initiatives and investments in technologies with lower CO2 emissions. The results of the dialogue shall provide a basis for a possible low-carbon industry roadmap NRW and may also serve as an example for other industrialized regions in the EU and globally. The paper sketches the structured dialogue process with the stakeholders from companies as well as industrial associations and presents the learnings regarding the engagement of energy intensive industries into ambitious climate policies on a regional level. These include existing limitations as well as chances in the respective sectors on the state level, regarding their economic and technical structures as well as their innovation systems. The findings are based on more than a dozen stakeholder workshops with industry companies and more than 150 individual representatives of NRW's energy intensive industries as well as on background research in the initial phase of the project.

Description: Washing laundry is one of the most widespread housework tasks in the world. Washing machines, performing this task already in many private households, are now responsible for about 2% of the global electricity consumption. Worldwide, more than 840 million domestic washing machines are in use, with an annual consumption exceeding 92 TWh of electricity and 19 billion m3 of water as well as causing emissions of more than 62 megatons CO2eq. In North America, Western Europe and Pacific OECD countries, most households own a washing machine. In these economies standard and label policy programs already addressed and reduced the specific electricity and water consumption of washing machines per wash cycle. Nevertheless, in other world regions, the level of ownership for washing machines is still well below saturation and high growth rates can be observed in developing and newly industrialising countries. As washing machines use water, electricity, chemical substances and process time as resources, also the absolute worldwide resource consumption and emissions of these appliances are still on the rise. Due to different washing habits and practices as well as types of washing machines in different world regions, the specific consumption of resources for doing the laundry is varying to a large extent. On that score, this paper presents an overview of the current situation worldwide as well as respective saving potentials. Bottom-up scenario calculations, carried out for the 11 world regions according to the Intergovernmental Panel on Climate Change classification, show that large energy, water and greenhouse gas savings are possible with the "Best Available Technologies" today, and even higher savings will be possible with next generation "Best Not yet Available Technologies". According to model results, these savings are usually also very cost-effective. Following these calculations, it is highly advisable for policymakers world-wide to pay even more attention to improvement options in order to implement ambitious and product-specific policy packages, including minimum performance standards and labelling schemes.

Description: One of the most pressing issues of climate policy is how to get building owners to invest in the energy efficiency of their homes. The German federal government has set the goal of decreasing the energy demand of buildings by 80 to 95 percent until 2050. One pillar of the strategy to support building owners in this task is the provision of targeted energy advice, to both motivate owners to implement an energy efficiency refurbishment and help them to choose the most efficient measures. In this paper we analysed the demand for energy advice in three German cities of the Ruhr area finding the number of energy consulting provided to be extremely low compared to the stated goals. Based on the approach of joint knowledge production we invited stakeholders from the three cities to participate in a series of workshops in order to develop ideas how to more effectively bring homeowners and energy advisors together. As a result, different energy advice experiments were co-operatively developed for each city targeting different groups by using tailored channels for outreach. The evaluation of both the process as well as the outcome of the experiments indicates that while joint knowledge production is a suitable approach to enable knowledge transfer and formation of new networks between different stakeholders in science and practice, it does not necessarily lead to superior approaches with regard to effectively addressing a policy issue at hand. Apart from the experiment in which the window of opportunity change of building ownership was taken advantage of, participation of target groups in the experiments has been soberingly low, underlining the value of so-called trigger points when designing effective outreach strategies to building owners.

Description: Energy efficiency improvements have numerous benefits/impacts additional to energy and greenhouse gas savings, as has been shown and analysed e.g. in the 2014 IEA Report on "Multiple Benefits of Energy Efficiency". This paper presents the Horizon 2020-project COMBI ("Calculating and Operationalising the Multiple Benefits of Energy Efficiency in Europe"), aiming at calculating the energy and non-energy impacts that a realisation of the EU energy efficiency potential would have in 2030. The project covers the most relevant technical energy efficiency improvement actions and estimates impacts of reduced air pollution (and its effects on human health, eco-systems/crops, buildings), improved social welfare (incl. disposable income, comfort, health, productivity), saved biotic and abiotic resources, and energy system, energy security, and the macroeconomy (employment, economic growth and public budget). This paper explains how the COMBI energy savings potential in the EU 2030 is being modelled and how multiple impacts are assessed. We outline main challenges with the quantification (choice of baseline scenario, additionality of savings and impacts, context dependency and distributional issues) as well as with the aggregation of impacts (e.g. interactions and overlaps) and how the project deals with them. As research is still ongoing, this paper only gives a first impression of the order of magnitude for additional multiple impacts of energy efficiency improvements may have in Europe, where this is available to date. The paper is intended to stimulate discussion and receive feedback from the academic community on quantification approaches followed by the project.

Description: India is currently at a crucial juncture where it is aiming for economic growth to meet the basic needs of its 1.2 billion people. However, so far this growth has resulted in energy shortages and the increasing use of limited resources. This policy brief series is about decoupling, i.e. improving efficiency to reduce the resources and energy needed for this growth and meet the country's increasing development needs. The construction sector is highly resource and energy intensive; it is therefore imperative that it moves towards a path of environmental sustainability. This transition is likely to be achieved by decoupling both resource and energy use from the sector's growth. Decision-makers in the sector will play a crucial role in achieving this. The aim of this policy brief series is to inform decision-makers in India at central government and state level about the current status of research, policy and institutions in the Indian construction sector and to identify key drivers and barriers. Finally, practical recommendations will be made for decision-makers about how to promote decoupling of resource and energy use from growth in the construction sector. Policy brief 3 focuses on recommendations both at national and state level on the possible interventions that could result in resource and energy use being decoupled from growth in the Indian construction sector. Lack of a comprehensive policy on resource efficiency and the possibility of using secondary raw materials to obtain resource and impact decoupling continue to be the key issues that India will have to grapple with in the years to come.

Description: One of the main objectives of impact assessments is to identify potentially significant impacts. However, determining this significance has received very limited attention as a procedural step in social impact assessments. Consequently, only limited research and documentation exists on approaches, survey tools and evaluation methods, especially with regard to participatory approaches and combined participatory-technical approaches. This study aims to address this research gap by developing and applying a joined participatory and technical impact significance evaluation. The approach is applied in a case study which analysed the livelihood impacts of the large-scale concentrated solar power plant NOORO I in Ouarzazate, Morocco. The analysis shows that although different approaches and significance criteria must be applied when involving both local stakeholders and experts, the linked analysis offers more robust results and an improved basis for decision-making. Furthermore, it was observed in the case study that impacts affecting the social, cultural and political spheres were more often considered significant than impacts affecting the physical and material livelihood dimensions. Regarding sustainability assessments of large-scale renewable energy plants, these findings underline the importance (as for other large-scale infrastructure developments) of placing greater emphasis on the inclusion of social aspects in impact assessments.