ALBERT

Description: While secondary plastics arising at the manufacturing and processing phases are recycled to the production process in large measure due to its high purity, the market share of secondary plastics remains low and recycling is often dominated by thermal recovery. Energetic recovery of plastics in waste electrical and electronic equipment (WEEE) has been dominating for a long time. At the same time reuse of WEEE is not well developed at EU level; with few exceptions at Member State level. Against this background we want to discuss in this book chapter several policy instruments that aim to increase the reuse of WEEE as well as the use of secondary plastics in electrical and electronic equipment. Taking the case study of Germany we evaluate instruments theoretical quantity effects and their feasibility. In reality, instruments are often weak and scattered implemented. To identify a policy mix without the risk of creating expensive policies with the potential for inefficient outcomes, we make two complementary conceptual proposes, which first open up perspectives for possible synergies of instruments and second allow an integrated understanding of the regional context in which instruments are implemented. The discussion of the case study of promoting reuse within this framework makes clear, that such an integrated understanding is the basis for any appropriate, targeted and efficient stimulation and bridges the gap between theoretical policy formulation and practically implementation.

Description: Human nutrition is responsible for about 30% of the global natural resource use. In order to decrease resource use to a level in line with planetary boundaries, a resource use reduction in the nutrition sector by a factor 2 is suggested. A large untapped potential to increase resource efficiency and improve consumers' health status is assumed, but valid indicators and general guidelines to assess these impacts and limits can barely be found. Therefore we will have a try to define sustainable limits towards the individuals' daily diet and therefore stimulate current available scientific debate. Within the paper an examination of existing indicators and assessment methods is carried out. We set the focus on health indicators, such as energy intake, and environmental indicators, such as the carbon or material footprint. The paper aims to provide first, an assessment of core indicators to explore the sustainability impact of foodstuff, and second, a deeper understanding and a discussion of sustainable limits for those dimensions of food and nutrition. Therefore we will discuss several ecological and health indicators which may be suitable to assess the sustainabilty impact and indicate differences or similarities. As a result it becomes obvious that several ecological indicators "point in the same direction" and therefore a discussion about the variability and the variety of these indicators has to be faced in the future. Further the definition of sustainable levels per indicator is an essential aspect to get an idea about the needed barriers for a sustainable nutrition, by now first steps had been made, but no binding guidelines are available yet. Therefore the paper suggests a few indications to set up sustainable levels for health and environmental indicators, based on the idea to reduce the resource use level up to 30-50% in 2030.

Description: In a globalized economy, the use of natural resources is determined by the demand of modern production and consumption systems, and by infrastructure development. Sustainable natural resource use will require good governance and management based on sound scientific information, data and indicators. There is a rich literature on natural resource management, yet the national and global scale and macro-economic policy making has been underrepresented. We provide an overview of the scholarly literature on multi-scale governance of natural resources, focusing on the information required by relevant actors from local to global scale. Global natural resource use is largely determined by national, regional, and local policies. We observe that in recent decades, the development of public policies of natural resource use has been fostered by an "inspiration cycle" between the research, policy and statistics community, fostering social learning. Effective natural resource policies require adequate monitoring tools, in particular indicators for the use of materials, energy, land, and water as well as waste and GHG emissions of national economies. We summarize the state-of-the-art of the application of accounting methods and data sources for national material flow accounts and indicators, including territorial and product-life-cycle based approaches. We show how accounts on natural resource use can inform the Sustainable Development Goals (SDGs) and argue that information on natural resource use, and in particular footprint indicators, will be indispensable for a consistent implementation of the SDGs. We recognize that improving the knowledge base for global natural resource use will require further institutional development including at national and international levels, for which we outline options.

Description: In recent years, a number of energy scenario studies which aim to advise policy makers on appropriate energy policy measures have been developed. These studies highlight changes required to achieve a future energy system that is in line with public policy goals such as reduced greenhouse gas emissions and an affordable energy supply. We argue that behavioural changes towards energy-sufficient lifestyles have considerable potential to contribute to public policy goals and may even be indispensable for achieving some of these goals. This potential should, therefore, be reflected in scenario studies aiming to provide comprehensive advice to policy makers. We analyse the role that energy-sufficient lifestyles play in prominent recent global energy scenario studies and find that these studies largely ignore the potential of possible behavioural changes towards energy-sufficient lifestyles. We also describe how such changes have been considered in several other scenario studies, in order to derive recommendations for the future development of global energy scenarios. We conclude that the inclusion of lifestyle changes in energy scenarios is both possible and useful. Based on our findings, we present some general advice for energy scenario developers on how to better integrate sufficiency into future energy scenario studies in a quantitative manner.

Description: The German federal state of North Rhine-Westphalia (NRW) is home to one of the most important industrial regions in Europe, and is the first German state to have adopted its own Climate Protection Law (CPL). This paper describes the long-term (up to 2050) mitigation scenarios for NRW’s main energy-intensive industrial sub-sectors which served to support the implementation of the CPL. It also describes the process of scenario development, as these scenarios were developed through stakeholder participation. The scenarios considered three different pathways (best-available technologies, break-through technologies, and CO2 capture and storage). All pathways had optimistic assumptions on the rate of industrial growth and availability of low-carbon electricity. We find that a policy of "re-industrialisation" for NRW based on the current industrial structures (assumed here to represent an average growth of NRWs industrial gross value added (GVA) of 1.6% per year until 2030 and 0.6% per year from 2030 to 2050), would pose a significant challenge for the achievement of overall energy demand and German greenhouse gas (GHG) emission targets, in particular as remaining efficiency potentials in NRW are limited. In the best-available technology (BAT) scenario CO2 emission reductions of only 16% are achieved, whereas the low carbon (LC) and the carbon capture and storage (CCS) scenario achieve 50% and 79% reduction respectively. Our results indicate the importance of successful development and implementation of a decarbonised electricity supply and breakthrough technologies in industry - such as electrification, hydrogen-based processes for steel, alternative cements or CCS - if significant growth is to be achieved in combination with climate mitigation. They, however, also show that technological solutions alone, together with unmitigated growth in consumption of material goods, could be insufficient to meet GHG reduction targets in industry.

Description: The German government has set itself the target of reducing the country's GHG emissions by between 80 and 95% by 2050 compared to 1990 levels. Alongside energy efficiency, renewable energy sources are set to play the main role in this transition. However, the large-scale deployment of renewable energies is expected to cause increased demand for critical mineral resources. The aim of this article is therefore to determine whether the transformation of the German energy system by 2050 ("Energiewende") may possibly be restricted by a lack of critical minerals, focusing primarily on the power sector (generating, transporting and storing electricity from renewable sources). For the relevant technologies, we create roadmaps describing a number of conceivable quantitative market developments in Germany. Estimating the current and future specific material demand of the options selected and projecting them along a range of long-term energy scenarios allows us to assess potential medium- or long-term mineral resource restrictions. The main conclusion we draw is that the shift towards an energy system based on renewable sources that is currently being pursued is principally compatible with the geological availability and supply of mineral resources. In fact, we identified certain sub-technologies as being critical with regard to potential supply risks, owing to dependencies on a small number of supplier countries and competing uses. These sub-technologies are certain wind power plants requiring neodymium and dysprosium, thin-film CIGS photovoltaic cells using indium and selenium, and large-scale redox flow batteries using vanadium. However, non-critical alternatives to these technologies do indeed exist. The likelihood of supplies being restricted can be decreased further by cooperating even more closely with companies in the supplier countries and their governments, and by establishing greater resource efficiency and recyclability as key elements of technology development.

Description: Energy systems across the globe are going through a radical transformation as a result of technological and institutional changes, depletion of fossil fuel resources, and climate change. At the local level, increasing distributed energy resources requires that the centralized energy systems be re-organized. In this paper, the concept of Integrated community energy systems (ICESs) is presented as a modern development to re-organize local energy systems to integrate distributed energy resources and engage local communities. Local energy systems such as ICESs not only ensure self-provision of energy but also provide essential system services to the larger energy system. In this regard, a comparison of different energy system integration option is provided. We review the current energy trends and the associated technological, socio-economic, environmental and institutional issues shaping the development of ICESs. These systems can be applied to both developed and developing countries, however, their objectives, business models as well as composition differs. ICESs can be accepted by different actors such as local governments, communities, energy suppliers and system operators as an effective means to achieve sustainability and thereby will have significant roles in future energy systems.

Description: In the future, the capacities of renewable SNG (synthetic natural gas) will expand significantly. Pilot plants are underway to use surplus renewable power, mainly from wind, for electrolysis and the production of hydrogen, which is methanated and fed into the existing gas pipeline grid. Pilot projects aim at the energetic use of SNG for households and transport in particular for gas fueled cars. Another option could be the use of SNG as feedstock in chemical industry. The early stage of development raises the question of whether SNG should be better used for mobility or the production of chemicals. This study compares the global warming potential (GWP) of the production of fossil natural gas (NG) and carbon-dioxide (CO2)-based SNG and its use for car transport versus chemical use in the form of synthesis gas. Since the potential of wind energy for SNG production is mainly located in northern Germany, the consequences by a growing distance between production in the North and transport to the South of Germany are also examined. The results indicate that CO2-based SNG produced with wind power would lead to lower GWP when substituting NG for both uses in either transport or chemical production. Differences of the savings potential occur in short-distance pipeline transport. The critical factor is the energy required for compression along the process chain.

Description: This article presents an integrated assessment conducted in order to explore whether carbon capture and storage (CCS) could be a viable technological option for significantly reducing future CO2 emissions in South Africa. The methodological approach covers a commercial availability analysis, an analysis of the long-term usable CO2 storage potential (based on storage capacity assessment, energy scenario analysis and source-sink matching), an economic and ecological assessment and a stakeholder analysis. The findings show, that a reliable storage capacity assessment is needed, since only rough figures concerning the effective capacity currently exist. Further constraints on the fast deployment of CCS may be the delayed commercial availability of CCS, significant barriers to increasing the economic viability of CCS, an expected net maximum reduction rate of the power plant's greenhouse gas emissions of 67%-72%, an increase in other environmental and social impacts, and low public awareness of CCS. One precondition for opting for CCS would be to find robust solutions to these constraints, taking into account that CCS could potentially conflict with other important policy objectives, such as affordable electricity rates to give the whole population access to electricity.

Description: Insulating existing buildings offers great potential for reducing greenhouse gas emissions and meeting Germany's climate protection targets. Previous research suggests that, since homeowners' decision-making processes are inadequately understood as yet, today's incentives aiming at increasing insulation activity lead to unsatisfactory results. We developed an agent-based model to foster the understanding of homeowners' decision-making processes regarding insulation and to explore how situational factors, such as the structural condition of houses and social interaction, influence their insulation activity. Simulation experiments allow us furthermore to study the influence of socio-spatial structures such as residential segregation and population density on the diffusion of renovation behavior among homeowners. Based on the insights gained, we derive recommendations for designing innovative policy instruments. We conclude that the success of particular policy instruments aiming at increasing homeowners' insulation activity in a specific region depends on the socio-spatial structure at hand, and that reducing financial constraints only has a relatively low potential for increasing Germany's insulation rate. Policy instruments should also target the fact that specific renovation occasions are used to undertake additional insulation activities, e.g. by incentivizing lenders and craftsmen to advise homeowners to have insulation installed.

Description: De-industrialization, climate and demographic changes are only a few key words that indicate the challenge of urban development in many industrialized countries for the coming decades. A fundamental transformation of infrastructure and the built environment is expected to adjust to future needs. Numerous concepts of integrating efficiency and renewable energy sources into urban planning were elaborated in recent years. Energy sufficiency in the meaning of voluntary demand reduction of energy intensive goods and services is the third and mostly forgotten pillar of sustainable development. However, organizational and spatial measures are needed to support behavior modification. This paper presents results of a transdisciplinary research design with local stakeholders and scientific experts to develop an understanding of what energy sufficiency might contribute to sustainable urban development. Based on the Multi-Level-Perspective of the transition research approach, it analyzes how stakeholders and experts define energy sufficiency structures for the shrinking district of Vohwinkel (Germany). The paper also shows a compilation and evaluation of measures which facilitate energy sufficient behavior in the fields of space heating and passenger transport on a local level. The methodological concept comprises expert interviews, thought experiments with stakeholders to develop a vision of an "energy sufficient Vohwinkel 2050" as well as a stakeholder workshop to discuss the results. A shrinking population is seen as a chance to actively adapt the built environment to foster energy sufficiency.

Description: The adverse environmental impacts from inefficient building construction increase if measures to reduce energy and resource use, through stringent building policies and efficient technology, are not implemented in developed and developing countries. To illustrate a holistic approach to reducing buildings' energy and resources, the comparison of energy efficient and green buildings in terms of their technological aspects and their policy context in developed and developing countries, mainly in Europe, the USA and India, is presented together with a policy package recommendation for Nepal. A quality review of multiple literature sources, supported by various expert opinions, were the methods used for this in-depth analysis. It discusses that mandatory building standards, voluntary labels, information instruments and financial incentives are the most effective combination for the shift towards market transformation, that results in a higher share of energy efficient and green buildings. The lesson such as higher compliance with, and enforcement of, building energy standards can be seen in developed countries (e.g. Germany). Looking at a building's life cycle perspective, it is not sufficient to focus solely on operational energy reduction in higher energy efficient buildings as this is achieved by the increased use of energy intensive materials. Green requirements must be considered in updating building energy standards and labels, particularly for developed countries. Green building certification will also become more effective when the stringency of energy standards is higher and when the whole building life cycle assessment is considered. Due to the increasing scarcity of energy and resources, many developing countries are forced to face up to the need for holistic green buildings. Although baseline standards are not as high as in most developed countries and national financial support is low, the gradual move towards making the standards more stringent and incorporating the wider scope of resource saving are positive developments in developing countries (e.g. India). However, to achieve significant success, strategies must include the establishment of a suitable funding environment, a political commitment and a strong government vision for long term and sustainable building construction. The challenges faced by Nepal are even greater due to the fast pace of urban growth and the absence of energy and resource efficient buildings policies, highlighting the need for an effective policy package. Overall, this dissertation demonstrates how energy efficient and green buildings are interlinked. Green buildings reinforced with higher levels of energy efficiency and energy efficient buildings incorporating green requirements are stepping-stones for achieving greater building energy and resource efficiencies. And a suitable policy package fosters its development.

Description: Biodiversity loss is widely recognized as a serious global environmental change process. While large-scale metal mining activities do not belong to the top drivers of such change, these operations exert or may intensify pressures on biodiversity by adversely changing habitats, directly and indirectly, at local and regional scales. So far, analyses of global spatial dynamics of mining and its burden on biodiversity focused on the overlap between mines and protected areas or areas of high value for conservation. However, it is less clear how operating metal mines are globally exerting pressure on zones of different biodiversity richness; a similar gap exists for unmined but known mineral deposits. By using vascular plants' diversity as a proxy to quantify overall biodiversity, this study provides a first examination of the global spatial distribution of mines and deposits for five key metals across different biodiversity zones. The results indicate that mines and deposits are not randomly distributed, but concentrated within intermediate and high diversity zones, especially bauxite and silver. In contrast, iron, gold, and copper mines and deposits are closer to a more proportional distribution while showing a high concentration in the intermediate biodiversity zone. Considering the five metals together, 63% and 61% of available mines and deposits, respectively, are located in intermediate diversity zones, comprising 52% of the global land terrestrial surface. 23% of mines and 20% of ore deposits are located in areas of high plant diversity, covering 17% of the land. 13% of mines and 19% of deposits are in areas of low plant diversity, comprising 31% of the land surface. Thus, there seems to be potential for opening new mines in areas of low biodiversity in the future.

Description: Objective: The aim of the present article is to conduct an integrated assessment in order to explore whether CCS could be a viable technological option for significantly reducing future CO2 emissions in India. Methods: In this paper, an integrated approach covering five assessment dimensions is chosen. However, each dimension is investigated using specific methods (graphical abstract). Results: The most crucial precondition that must be met is a reliable storage capacity assessment based on site-specific geological data since only rough figures concerning the theoretical capacity exist at present. Our projection of different trends of coal-based power plant capacities up to 2050 ranges between 13 and 111 Gt of CO2 that may be captured from coal-fired power plants to be built by 2050. If very optimistic assumptions about the country's CO2 storage potential are applied, 75 Gt of CO2 could theoretically be stored as a result of matching these sources with suitable sinks. If a cautious approach is taken by considering the country's effective storage potential, only a fraction may potentially be sequestered. In practice, this potential will decrease further with the impact of technical, legal, economic and social acceptance factors. Further constraints may be the delayed commercial availability of CCS in India, a significant barrier to achieving the economic viability of CCS, an expected net maximum reduction rate of the power plant’s greenhouse gas emissions of 71-74%, an increase of most other environmental and social impacts, and a lack of governmental, industrial or societal CCS advocates. Conclusion and practice implications: Several preconditions need to be fulfilled if CCS is to play a future role in reducing CO2 emissions in India, the most crucial one being to determine reliable storage capacity figures. In order to overcome these barriers, the industrialised world would need to make a stronger commitment in terms of CCS technology demonstration, cooperation and transfer to emerging economies like India. The integrated assessment might also be extended by a comparison with other low-carbon technology options to draw fully valid conclusions on the most suitable solution for a sustainable future energy supply in India.

Description: The global demand for timber is increasing, with prognoses for the EU showing particularly high growth to meet renewable energy targets. However, there are limited options to meet rising timber demands within the EU, and global land competition to meet world food, energy and material needs, as well as to conserve high value nature areas, is increasing. This dissertation addresses the knowledge gap between the pressures of increased land use abroad and the underlying drivers of land use change. It argues that there is a high risk of problem shifting if EU policies to increase timber consumption are not accompanied by a monitoring system that accounts for consumption levels and provides a benchmark for sustainability.

Description: Energy intensive industries are one of the fields in which strong increases of energy efficiency and deep decarbonisation strategies are particularly challenging. Although European energy intensive industries have already achieved significant energy and greenhouse gas reductions in the past, much remains to be done to make a significant contribution to achieving European as well as national climate mitigation targets of greenhouse gas emission reductions by -80% or more (compared to the baseline of 1990). North Rhine-Westphalia (NRW) is a European hotspot for coping with this challenge, accommodating more than 10% of the energy intensive industries of the EU28. It is also the first German state to have adopted its own Climate Law, enacting state-wide CO2 emission reductions by 80% until 2050 compared to 1990. The state government initiated the project "Platform Climate Protection and Industry North-Rhine Westphalia" to identify and develop the necessary far-reaching low carbon innovation strategies for energy intensive industries. Heart of the project was a dialogue process, which involved a broad spectrum of stakeholders from steel, chemical, aluminium, cement, glass and paper producing industries. Besides enhancing and broadening the knowledge on high efficiency and low-carbon technologies within industries, the aim was to explore possible pathways and preconditions for the application of these technologies in energy intensive industries as well as to strengthen the motivation of companies for initiatives and investments in technologies with lower CO2 emissions. The results of the dialogue shall provide a basis for a possible low-carbon industry roadmap NRW and may also serve as an example for other industrialized regions in the EU and globally. The paper sketches the structured dialogue process with the stakeholders from companies as well as industrial associations and presents the learnings regarding the engagement of energy intensive industries into ambitious climate policies on a regional level. These include existing limitations as well as chances in the respective sectors on the state level, regarding their economic and technical structures as well as their innovation systems. The findings are based on more than a dozen stakeholder workshops with industry companies and more than 150 individual representatives of NRW's energy intensive industries as well as on background research in the initial phase of the project.

Description: Washing laundry is one of the most widespread housework tasks in the world. Washing machines, performing this task already in many private households, are now responsible for about 2% of the global electricity consumption. Worldwide, more than 840 million domestic washing machines are in use, with an annual consumption exceeding 92 TWh of electricity and 19 billion m3 of water as well as causing emissions of more than 62 megatons CO2eq. In North America, Western Europe and Pacific OECD countries, most households own a washing machine. In these economies standard and label policy programs already addressed and reduced the specific electricity and water consumption of washing machines per wash cycle. Nevertheless, in other world regions, the level of ownership for washing machines is still well below saturation and high growth rates can be observed in developing and newly industrialising countries. As washing machines use water, electricity, chemical substances and process time as resources, also the absolute worldwide resource consumption and emissions of these appliances are still on the rise. Due to different washing habits and practices as well as types of washing machines in different world regions, the specific consumption of resources for doing the laundry is varying to a large extent. On that score, this paper presents an overview of the current situation worldwide as well as respective saving potentials. Bottom-up scenario calculations, carried out for the 11 world regions according to the Intergovernmental Panel on Climate Change classification, show that large energy, water and greenhouse gas savings are possible with the "Best Available Technologies" today, and even higher savings will be possible with next generation "Best Not yet Available Technologies". According to model results, these savings are usually also very cost-effective. Following these calculations, it is highly advisable for policymakers world-wide to pay even more attention to improvement options in order to implement ambitious and product-specific policy packages, including minimum performance standards and labelling schemes.

Description: Sustainable supply chain management can drive sustainability. The interpretation of Sustainable supply chain management as an upstreamoriented strategy has an important, but limited potential. Addressing consumer needs and lifestyles downstream can increase the sustainability potentials of Sustainable supply chain management.

Description: This paper is the first of its kind, providing an identification of the problems encountered in all documented global experiences of cultivating the Jatropha curcas plant, covering 22 case studies. Influential components of the biodiesel production (stakeholders like government, farmers and enterprises as well as resources such as land and water) and how they are interconnected are pinpointed. In addition, the article gives recommendations to the main actors under ecological and socio-economic criteria to ensure a sustainable production of J. curcas oil in regions with appropriate climatic conditions for the plant's viability. Hence, this analysis of experiences discusses the following questions: What are the reasons and factors for the previous unsuccessful and unsustainable cultivation of J. curcas for producing biodiesel? Can it be lucrative and simultaneously achieve poverty alleviation/job creation under the constraints of efficient use of resources (land and water)?

Description: This article analyses drivers and barriers to returning and recycling mobile phones and their consideration in existing communication and collection campaigns. This is an important issue based on the fact that the mobile phone market is growing rapidly. In 2015 there are nearly 7 billion global mobile cellular subscriptions. This means that, at least theoretically, everyone in the world has access to mobile communication services (ITU 2015). However, the production of mobile phones is linked to an increasing use of natural resources: the "ecological rucksack" of a mobile phone is equal to about 75 kg of resources (Nordmann et al. 2015); while the global recycling rate of mobile phones is under 10 per cent (Nokia 2008, Tanskanen 2012). In order to adress this issue, the main factors that influence return and recycling behaviour (focussing on mobile phones) will be discussed in chapter 2 of this article. The theoretical analysis is based on the norm activation model by Ellen Matthies (2005). This analysis will be complemented by empirical data and findings generated in the research project "Return and use of old mobile phones", funded by the German Ministry of Education and Research (Wuppertal Institute for Climate, Environment, Energy/Institute for Advanced Sustainability Studies, 2012-2014). To conclude, we will identify and operationalise essential components of mobile phone communication and collection campaigns, based on the theoretical approach of Matthies, literature and empirical studies, in order to develop a set of criteria for analysing and rating such communication and collection campaigns. The results show that economic incentives as well as education and communication play a very important role in initiating more sustainable behavioural patterns in the ICT sector. The role of emotional factors is often underestimated in the development of communication activities. In summary, successful mobile phone communication and collection campaigns require a combination of several institutional, economic, social and emotional factors.

Description: Distributed cogeneration units are flexible and suited to providing balancing power, thereby contributing to the integration of renewable electricity. Against this background, we analysed the technical potential and ecological impact of CHP (combined heat and power) systems on the German minutes reserve market for 2010, 2020 and 2030. Typical CHP plants (from 1 to 2800 kWel) were evaluated in relation to typical buildings or supply cases in different sectors. The minutes reserve potential was determined by an optimisation model with a temporal resolution of 15 min. The results were scaled up to national level using a scenario analysis for the future development of CHP. Additionally, the extent to which three different flexibility measures (double plant size/fourfold storage volume/emergency cooler) increase the potential provision of balancing power was examined. Key findings demonstrate that distributed CHP could contribute significantly to the provision of minutes reserve in future decades. Flexibility options would further enhance the theoretical potential. The grid-orientated operating mode slightly increases CO2 emissions compared to the heat-orientated mode, but it is still preferable to the separate generation of heat and power. However, the impacts of a flexible mode depend greatly on the application and power-to-heat ratio of the individual CHP system.

Description: In this paper a new method for the evaluation and comparison of potential future electricity systems is presented. The German electricity system in the year 2050 is used as an example. Based on a comprehensive scenario analysis defining a corridor for possible shares of fluctuating renewable energy sources (FRES) residual loads are calculated in a unified manner. The share of electricity from PV and wind power plants in Germany in the year 2050 is in a range of 42-122% and the load demand has a bandwidth of around 460-750 TWh. The residual loads are input for an algorithm that defines a supplementary mix of technologies providing flexibility to the system. The overall system layout guarantees the balance of generation and demand at all times. Due to the fact that the same method for residual load calculation and mixture of technologies is applied for all scenarios, a good comparability is guaranteed and we are able to identify key characteristics for future developments. The unique feature of the new algorithms presented here is the very fast calculation for a year-long simulation with hourly or shorter time steps taking into account the state of charge or availability of all storage and flexibility technologies. This allows an analysis of many different scenarios on a macro-economic level, variation of input parameters can easily be done, and extensive sensitivity analysis is possible. Furthermore different shares of FRES, CO2-emission targets, interest rates or social acceptance of certain technologies can be included. The capabilities of the method are demonstrated by an analysis of potential German power system layouts with a base scenario of 90% CO2-reduction target compared to 1990 and by the identification of different options for a power sector with a high degree of decarbonisation. The approach also aims at a very high level of transparency both regarding the algorithms and regarding the input parameters of the different technologies taken into account. Therefore this paper also gives a comprehensive and complete overview on the technology parameters used. The forecast on all technologies for the year 2050 regarding technical and economic parameters was made in a comprehensive consultation process with more than 100 experts representing academia and industry working on all different technologies. An extensive analysis of options for the design of potential German energy supply systems in 2050 based on the presented methodology will be published in a follow-up paper.

Description: A key factor to energy-efficiency of heating in buildings is the behavior of households, in particular how they ventilate rooms. Energy demand can be reduced by behavioral change; devices can support this by giving feedback to consumers on their behavior. One such feedback device, called the "CO2 meter", shows indoor air-quality in the colors of a traffic light to motivate so called "shock ventilation", which is energy-efficient ventilation behavior. The following effects of the "CO2 meter" are analyzed: (1) the effect of the device on ventilation behavior within households, (2) the diffusion of "CO2 meter" to other households, and (3) the diffusion of changed behavior to households that do not adopt a "CO2 meter". An agent-based model of these processes for the city of Bottrop (Germany) was developed using a variety of data sources. The model shows that the "CO2 meter" would increase adoption of energy-efficient ventilation by c. 12% and reduce heating demand by c. 1% within 15 years. Technology diffusion was found to explain at least c. 54% of the estimated energy savings; behavior diffusion explains up to 46%. These findings indicate that the "CO2 meter" is an interesting low-cost solution to increase the energy-efficiency in residential heating.

Description: In October 2014, the European Council agreed on a target of improving overall energy efficiency by at least 27 per cent by 2030. According to the European Council's conclusions, this target should not be translated into nationally binding targets. Nevertheless individual Member States are free to set higher national objectives if desired. However, it is difficult to assess the degree of ambition of a national target because so far not much light has been shed upon the exact size of the untapped efficiency potentials. This paper provides an in-depth analysis and comparison of existing studies on energy efficiency potentials in the European Union's (EU) Member States by 2030. It includes a structured overview of the results, information on the quality of the available data and suggestions for improvement. The review shows that comprehensive studies on national energy efficiency potentials are rare and hardly comparable. The existing studies agree on the existence of significant potentials for energy efficiency. Their outcomes, however, vary significantly in terms of national levels. Assuming low policy intensity, energy savings between 10 and 28 per cent could be realised by 2030 compared to a baseline development, in the case of high policy intensity 7-44 per cent. Technical energy efficiency potentials in the different EU Member States are estimated at 14-52 per cent. On average, energy savings of 27 per cent by 2030 appear to be feasible with significant policy effort. We conclude that the deviation in Member States' energy efficiency potentials resulting from different studies represents an indication of the so far poor quality of underlying data. In order to allow for a concretisation of efficiency potential estimates, the comparability and detail of information sources should be improved.

Description: The economic assessment of low-carbon energy options is the primary step towards the design of policy portfolios to foster the green energy economy. However, today these assessments often fall short of including important determinants of the overall cost-benefit balance of such options by not including indirect costs and benefits, even though these can be game-changing. This is often due to the lack of adequate methodologies. The purpose of this paper is to provide a comprehensive account of the key methodological challenges to the assessment of the multiple impacts of energy options, and an initial menu of potential solutions to address these challenges. The paper first provides evidence for the importance of the multiple impacts of energy actions in the assessment of low-carbon options. The paper identifies a few key challenges to the evaluation of the co-impacts of low-carbon options and demonstrates that these are more complex for co-impacts than for the direct ones. Such challenges include several layers of additionality, high context dependency, and accounting for distributional effects. The paper continues by identifying the key challenges to the aggregation of multiple impacts including the risks of overcounting while taking into account the multitude of interactions among the various co-impacts. The paper proposes an analytical framework that can help address these and frame a systematic assessment of the multiple impacts.

Description: This study conducted by Wuppertal Institute and Germanwatch explores how the social pillar of sustainability at the local level could be met in Concentrated Solar Power (CSP) projects. For this purpose, the authors evaluate the livelihood dimension of CSP technology based on a case study conducted on the 160 MW pilot CSP plant Nooro I in Ouarzazate, Morocco.

Description: The Greens / European Free Alliance Group of the European Parliament contracted Wuppertal Institute in collaboration with Energiaklub to develop scientifically sound, comprehensive, alternative, and sustainable long term energy scenarios for Hungary, which cover potential development paths till 2030 and 2050. The scenarios developed deliver information about the costs and long-term effects of different energy choices for Hungary as well as credible information on potential benefits of greening the energy mix. As a result, the study aims to provide policy makers with better evidence for making informed, prudent and forward-thinking decisions in this field.

Description: The European Horizon 2020-project COMBI ("Calculating and Operationalising the Multiple Benefits of Energy Efficiency in Europe") aims at estimating the energy and non-energy impacts that a realisation of the EU energy efficiency potential would have in the year 2030. The project goal is to cover the most important technical potentials identified for the EU27 by 2030 and to come up with consistent estimates for the most relevant impacts: air pollution (and its effects on human health, eco-systems/crops, buildings), social welfare (including disposable income, comfort, health and productivity), biotic and abiotic resources, the energy system and energy security and the macro economy (employment, economic growth and the public budget). This paper describes the overall project research design, envisaged methodologies, the most critical methodological challenges with such an ex-ante evaluation and with aggregating the multiple impacts. The project collects data for a set of 30 energy efficiency improvement actions grouped by energy services covering all sectors and EU countries. Based on this, multiple impacts will be quantified with separate methodological approaches, following methods used in the respective literature and developing them where necessary. The paper outlines the approaches taken by COMBI: socio-economic modelling for air pollution and social welfare, resource modelling for biotic/abiotic and economically unused resources, General Equilibrium modelling for long-run macroeconomic effects and other models for short-run effects, and the LEAP model for energy system modelling. Finally, impacts will be aggregated, where possible in monetary terms. Specific challenges of this step include double-counting issues, metrics, within and cross-country/regional variability of effects and context-specificity.

Description: The need for deep decarbonisation in the energy intensive basic materials industry is increasingly recognised. In light of the vast future potential for renewable electricity the implications of electrifying the production of basic materials in the European Union is explored in a what-if thought-experiment. Production of steel, cement, glass, lime, petrochemicals, chlorine and ammonia required 125 TW-hours of electricity and 851 TW-hours of fossil fuels for energetic purposes and 671 TW-hours of fossil fuels as feedstock in 2010. The resulting carbon dioxide emissions were equivalent to 9% of total greenhouse gas emissions in EU28. A complete shift of the energy demand as well as the resource base of feedstocks to electricity would result in an electricity demand of 1713 TW-hours about 1200 TW-hours of which would be for producing hydrogen and hydrocarbons for feedstock and energy purposes. With increased material efficiency and some share of bio-based materials and biofuels the electricity demand can be much lower. Our analysis suggest that electrification of basic materials production is technically possible but could have major implications on how the industry and the electric systems interact. It also entails substantial changes in relative prices for electricity and hydrocarbon fuels.

Description: This handbook was developed in the context of a joint project of the Wuppertal Institute and the Centre for Social Investment (CSI) called the System Innovation Lab. It combined sustainability transformation research insights with those of social innovation in order to design an on-the-job training and coaching that would enable participants to take a systemic approach to innovation and test what this means in their respective work settings. Focussing on the topic of sustainable energy futures in Europe it addressed young European leaders in government, the private sector and civil society working on energy issues and combined latest theoretical insights with novel innovation and leadership methods to spread the capacity and courage that transforming entire sectors requires.

Description: The increasing rate of renewable energies poses new challenges for industries: the amount of wind and solar energy is by far more subject to fluctuations than that of fossil based energy. Large production facilities from the aluminium, cement, steel or paper industry, however, depend on a highly secure energy supply. To which amount is a limitation of fluctuations possible? This was the key question of the project "Flexibilisation of Industries Enables Sustainable Energy systems", which was realised by the Wuppertal Institute in cooperation with the polymers company Covestro last year. In the final report, authors around project co-ordinator Karin Arnold not only show which technological and economic parameters have been considered, but also present possible business models to promote "flexibility products".

Description: The current utilisation of natural resources in Germany and Europe is not sustainable, as inter alia stated by the German government as well as by the European Commission. At the same time, increased resource efficiency could lead to various environmental but also economic benefits. This brief study commissioned by Changing Markets presents developments in the field of resource efficiency policies, analyses the status quo of resource consumption with a special focus on fast moving consumer goods and describes potential effects of resource conservations.

Description: Contrary to "static" pathways that are defined once for all, this article deals with the need for policy makers to adopt a dynamic adaptive policy pathway for managing decarbonization over the period of implementation. When choosing a pathway as the most desirable option, it is important to keep in mind that each decarbonization option relies on the implementation of specific policies and instruments. Given structural, effectiveness, and timing uncertainties specific to each policy option, they may fail in delivering the expected outcomes in time. The possibility of diverging from an initial decarbonization trajectory to another one without incurring excessive costs should therefore be a strategic element in the design of an appropriate decarbonization strategy. The article relies on initial experiences in France and Germany on decarbonization planning and implementation to define elements for managing dynamic adjustment issues. Such an adaptive pathway strategy should combine long-lived incentives, like a pre-announced escalating carbon price, to form consistent expectations, as well as adaptive policies to improve overall robustness and resilience. We sketch key elements of a monitoring process based on an ex ante definition of leading indicators that should be assessed regularly and combined with signposts and trigger values at the subsector level.

Description: The South African government started the development of a basic energy efficiency policy framework in 2005, including a voluntary label for refrigerators. This initial label was the intended precursor to a mandatory standards and labelling (S&L) programme, but the impacts achieved were only very limited. Based on this first experience, the South African Bureau of Standards (SABS) formed in 2008 a working group for the development of the new and more specific South African National Standard SANS 941. This standard identifies energy efficiency requirements, labelling and measurement methods as well as the maximum allowable standby power for a set of appliances as reliable basis for introducing a mandatory regulation. Nevertheless, due to many existing barriers, such as lack of funding and low priority assigned to the initiative, a very long period passed by between the S&L planning and final policy implementation. Finally, in November 2014, the South African government published mandatory performance standards coming into force in 2015/2016 for a first set of appliances consisting of refrigerators, washing machines, dryers, dishwashers, electric water heaters, ovens, A/C and heat pumps. To analyse the effectiveness of the new S&L programme and the potential influence of delays in the implementing process, the authors performed an immediate first-hand evaluation of the new policy. As analytical reference base for available energy efficiency potentials, results from bottom-up scenario calculations will be presented exemplarily as case study for cold appliances covered by the S&L programme. A retrospective market study will show market trends before policy implementation and compare results with the new mandatory requirements. For the further policy analysis, a programme theory approach will be applied, in order to better understand why, how and under what conditions the policy works. Relationships with other energy efficiency policies and measures as well as positive or negative effects will be described. Furthermore, cause-impact relationships will be analysed to explain the functioning of the policy. Finally, success and failure factors will illustrate what needs to be done to achieve the desired energy efficiency targets. Henceforth, even though this study does not assess the direct transferability of the South African S&L programme to other regions, its findings could be relevant and useful for countries planning the implementation of similar policies.

Description: In Germany, doubling today's insulation rate of about 1% is an important element for reaching the government's target of reducing the demand for energy in the housing sector by 80% by 2050. A survey among 275 private homeowners was conducted to better understand their insulation activity. The results were incorporated into an agent-based model, which was applied to evaluate new policy options. The results of the survey show that policies should focus on homeowners' wall insulation activity. Homeowners' decision-making processes regarding insulation are largely unaffected by their financial resources, which raises the question of the usefulness of financial incentives. In contrast, non-economic factors were found to have a statistically significant influence: in the year following a house ownership change, a comparatively large number of insulation projects are carried out. The probability of insulating walls can be predicted from knowing the homeowner's age, attitude towards insulation, and the structural condition of the walls. The simulations indicate that information instruments lead to a comparatively small increase in the wall insulation rate, while obligating new homeowners to insulate the walls within the first year after moving in has the potential to increase the total insulation rate by up to 40%.