ALBERT

Description: This contribution presents the state of the art of economy-wide material flow accounting. Starting from a brief recollection of the intellectual and policy history of this approach, we outline system definition, key methodological assumptions, and derived indicators. The next section makes an effort to establish data reliability and uncertainty for a number of existing multinational (European and global) material flow accounting (MFA) data compilations and discusses sources of inconsistencies and variations for some indicators and trends. The results show that the methodology has reached a certain maturity: Coefficients of variation between databases lie in the range of 10% to 20%, and correlations between databases across countries amount to an average R2 of 0.95. After discussing some of the research frontiers for further methodological development, we conclude that the material flow accounting framework and the data generated have reached a maturity that warrants material flow indicators to complement traditional economic and demographic information in providing a sound basis for discussing national and international policies for sustainable resource use.

Description: Global warming, the overall extraction of minerals and the expansion of cultivated land for biomass harvest are growing globally. These "Big Three" represent key environmental pressures which may lead to a continuous degradation of the living environment, if not controlled at levels with acceptable low risk. The situation is complex, because countries and regions consume products which require resources such as minerals and land in various parts of the world. Nevertheless, it is possible to measure the global resource use which is associated with the domestic consumption. In order to inform policies at the national and supranational level whether it may be necessary to adjust the incentive framework for industry and households, reference data are needed to compare the status quo of their countries with what may be deemed acceptable at a global level. This chapter outlines a rationale for the derivation of possible long-term targets for total material consumption of abiotic materials (TMCabiot) and global land use for crops (GLUcropland). The indicated targets are expressed in tentative per capita values which may serve as a first orientation and basis for further debate and research.

Description: EXIOPOL (A New Environmental Accounting Framework Using Externality Data and Input–Output Tools for Policy Analysis) was a European Union (EU)-funded project creating a detailed, global, multiregional environmentally extended Supply and Use table (MR EE SUT) of 43 countries, 129 sectors, 80 resources, and 40 emissions. We sourced primary SUT and input–output tables from Eurostat and non-EU statistical offices. We harmonized and detailed them using auxiliary national accounts data and co-efficient matrices. Imports were allocated to countries of exports using United Nations Commodity Trade Statistics Database trade shares. Optimization procedures removed imbalances in these detailing and trade linking steps. Environmental extensions were added from various sources. We calculated the EU footprint of final consumption with resulting MR EE SUT. EU policies focus mainly on energy and carbon footprints. We show that the EU land, water, and material footprint abroad is much more relevant, and should be prioritized in the EU's environmental product and trade policies.

Description: The European Waste Framework Directive has defined waste prevention as top of the waste hierarchy meaning nothing less than a fundamental change of the sociotechnical system of waste infrastructures with all its economic, legal, social and cultural elements. Based on an empirical analysis of more than 300 waste prevention measures this paper assesses which prevention effects can realistically be achieved by applying the measures described in the German waste prevention programme or in those of other EU member states. Taking into account waste streams like packaging, food waste, bulky waste and production waste the results show that waste generation is not an unavoidable evil but can be significantly reduced at current level of technology.

Description: Resultado de la intervención intensiva antropogénica, la subcuenca ahora enfrenta serios problemas como la degradación de los suelos, deforestación y contaminación del agua. Estos impactos ambientales han provocado escasez del agua y disminución de su calidad a lo largo del transcurso del río y sus afluentes afectando la producción agropecuaria tanto como los ecosistemas dependientes del agua. Reconociendo estos problemas la administración municipal llegó a priorizar el territorio de la subcuenca. En este se promovió un proceso de concertación con actores locales de la subcuenca del Gil González con el fin de definir zonas de conservación, regeneración natural y fomento de sistemas de producción agrícola sostenible. Como mecanismo para promover estas medidas se estableció el Proyecto de Pagos por Servicios Ambientales Hídricos (PPSA-H) en la subcuenca del Río Gil González en el año 2007, lo cual forma parte del Programa Manejo Sostenible de los Recursos Naturales y Fomento de las Competencias Empresariales de la Cooperación Técnica Alemana (GIZ GmbH) en Nicaragua. El concepto de Pago por Servicios Ambientales Hídircos (PSA-H) esta aplicado como un mecanismo de incentivos financieros. Los planteamientos generales de la investigación están relacionados al concepto de PSA-H como una herramienta para la gestión integral de cuencas hidrográficas. Aparte de los planteamientos generales esta investigación trata de verificar específicamente la eficacia de la implementación del Proyecto de Pagos por Servicios Ambientales Hídricos (PSA-H) en la Subcuenca del Gil González como un caso de estudio.

Description: Fossil independence and substantial reductions in CO2 emissions seem to be possible with 2nd generation biofuels. New technologies allow a full carbon-to-fuel conversion of non-edible plant parts such as straw or wood, and the cultivation of algae or salt-resistant plants uncouples bioenergy from food production. Nevertheless, impacts on biodiversity, global land and water use are widely unclear and their competitiveness with 1st generation biofuels and electric mobility is an open question. An interdisciplinary team of Empa, University of Zurich and the Wuppertal Institute of Climate, Environment and Energy evaluated the most sustainable production techniques and assessed their potential for our future mobility.

Description: A desirable future critically depends on our ability to ensure the supply of key resources while simultaneously respecting planetary boundaries. This paper looks at the potential implications of living within the "safe operating space" for people, business and the economy. It develops a positive vision of the future based on three pillars: a safe and fair use of global resources, a sustainable society, and a transformed economy. We review and build on recent sustainability visions to develop a holistic reflection on what life in 2050 could look like, and explore the key changes in the economy needed to get there. In particular we show that resource efficiency requires a systemic shift in values, innovation, governance and management regimes. We present a bold vision for Europe underlined by indicators and targets, explore transition challenges to getting there and conclude with a list of key policies needed for overcoming challenges and reaching the vision.

Description: The relationship between large-scale metal mining and its impacts is a topic of growing discussions in Argentina. Multinational mining corporations publish sustainability reports in order to show their social responsibility and contributions to sustainable development. These reports promote a higher transparency but doubts remain as to its usefulness to improve relationships with communities. By using a descriptive-explanatory method, this study analyses the 2009 Sustainability Report of Bajo de la Alumbrera mine so as to assess its quality and compare the "reality" painted by the company with the views of conflict by critical stakeholders. Results, validated with reports from other years, show the need to improve the information reported for conflictive indicators and, along with local governments, to implement a significant change in the way of making decisions, especially by engaging critical stakeholders.

Description: During the last century, the consumption of materials for human needs increased by several orders of magnitude, even for non-renewable materials such as metals. Some data on annual consumption (input) and recycling/waste (output) can often be found in the federal statistics, but a clear picture of the main flows is missing. A dynamic material flow model is developed for the example of copper in Switzerland in order to simulate the relevant copper flows and stocks over the last 150 years. The model is calibrated using data from statistical and published sources as well as from interviews and measurements. A simulation of the current state (2000) is compared with data from other studies. The results show that Swiss consumption and losses are both high, at a level of about 8 and 2 kg/(cap year), respectively, or about three times higher than the world average. The model gives an understanding of the flows and stocks and their interdependencies as a function of time. This is crucial for materials whose consumption dynamics are characterised by long lifetimes and hence for relating the current output to the input of the whole past. The model allows a comprehensive discussion of possible measures to reduce resource use and losses to the environment. While increasing the recycling reduces losses to landfill, only copper substitution can reduce the different losses to the environment, although with a time delay of the order of a lifetime.

Description: While strategic studies on natural resources usually focus on the criticality of certain single materials, our paper starts from the inter-linkages between and among resources (called "the resource nexus"). It examines the impact any food and water stress may have on extraction activities in fragile states and regions. According to our approach, conflicts are likely to increase and may escalate in a number of countries, many of which are of relevance for the global supply of strategic materials. Future criticality for European and other industries, thus, is more likely to result from particular regions surpassing their adaptive capacities, and not mainly from limited availability or bottlenecks in the supply chain. The paper first develops a heuristic model of drivers for stress in resource-rich regions. Applying this approach, our paper then develops a global three-layered map along the dimensions of (i) future regional food and water stress, (ii) fragility of countries, and (iii) resource-rich countries with relevant reserves of strategic materials. As a result our paper tentatively identifies 15 countries at high risk and some 30 other countries being at relevant risk of causing resource supply disruptions. The conclusions underline the need to analyse those global inter-linkages and institutional mechanisms for strategic futures studies at a regional scale. As this may go beyond the capacities of actors on commodity markets, our paper also draws conclusions towards the establishment of an international data hub on the global resource nexus and for futures research. The paper points to some of the long-term implications of these issues.

Description: Living Labs for Sustainable Development aim to integrate users and actors for the successful generation of low-resource innovations in production-consumption systems. This paper investigates potentials of and measures towards the realization of a German Living Lab infrastructure to support actor-integrated sustainability research and innovations in Germany. Information was primarily derived from extensive dialog with experts from the fields of innovation, sustainable development and the Living Lab community (operators, users, etc.), which was facilitated through interviews and workshops. A status quo analysis revealed that, generally, the sustainability and Living Lab communities are hardly intertwined. Twelve Living Labs that explicitly consider sustainability aspects were identified. The application fields "Living and Working", "Town, Region and Mobility", and “Retail and Gastronomy" were identified as particularly suitable for investigation in Living Labs and highly relevant in terms of resource efficiency. Based on the analyses of drivers and barriers and SWOT, keystones for the development of a research infrastructure for user integrated development of sustainable products and services were formulated. Suggested strategies and measures include targeted funding programs for actor-integrated, socio-technical research based on a Living Lab network, a communication campaign, and programs to foster networking and the inclusion of SMEs.

Description: Iran as an energy-rich country faces many challenges in optimal utilization of its vast resources. High population and economic growth, generous subsidies program, and poor resource management have contributed to rapidly growing energy consumption and high energy intensity for the past decades. The continuing trend of energy consumption will bring about new challenges as it will shrink oil exports revenues restraining economic activities and lowering standard of living. This study intends to tackle some of the important challenges in the energy sector and to explore alternative scenarios for utilization of energy resources in Iran for the period 2005-2030. We use techo-economic or end-use approach along with econometric methods to model energy demand in Iran for different types (fuel, natural gas, electricity, and renewable energy) in all sectors of the economy (household, industry, transport, power plants, and others) and forecast it under three scenarios: Business As Usual (BAU), Efficiency, and Renewable Energy. This study is the first comprehensive study that models the Iranian energy demand using the data at different aggregation levels and a combination of methods to illuminate the future of energy demand under alternative scenarios. The results of the study have great policy implications as they indicate a huge potential for energy conservation and therefore additional revenues and emission reduction under the efficiency scenario compared with the base scenario. Specifically, the total final energy demand under the BAU scenario will grow on average by 2.6 percent per year reaching twice the level as that in 2005. In contrast, the total final energy demand in the Efficiency scenario will only grow by 0.4 percent on average per year. The average growth of energy demand under the combined Efficiency and Renewable Energy scenarios will be 0.2 percent per year. In the BAU scenario, energy intensity will be reduced by about 30 percent by 2030, but will still be above today's world average. In the Efficiency scenario, however, energy intensity will decline by about 60 percent by 2030 to a level lower than the world average today. The energy savings under the Efficiency and Renewable scenarios will generate significant additional revenues and will lead to 45 percent reduction in CO2-emissions by 2030 as compared to the BAU trends.

Description: Carbon capture and storage (CCS) might be an important climate protection technology for coal-rich countries. This paper presents first results of a systemic and long-term analysis of a future CCS implementation in India. It focuses on potential storage formations in the geological subsurface and the geographic match of these sinks with CO2 emissions of current and future largepoint power plants. The analysis is framed by an overview on India’s position on CCS, ongoing Indian research and development projects as well as its international activities. The geological potential for CO2 sequestration in India is subject to large uncertainty because, so far, only few studies estimated it in a vague manner. A first meta-analysis shows that there is a huge variation between 48 Gt and 572 Gt of CO2. The main differences between the evaluated studies are the assumed capacities for deep saline aquifers and basalt formations. Taking the ongoing discussion and the existing uncertainties into account, the storage potential might be provided only by aquifers (in the range of 44 to 360 Gt of CO2) and hydrocarbon fields (2 to 7 Gt of CO2). The amount of CO2 emissions possibly available for sequestration is assessed by applying three substantially different long-term energy scenarios for India. These scenarios, indicating pathways between a "low carbon" and a "high carbon" development until 2050, result in cumulated CO2 emissions between 30 and 171 Gt if all new large-scaled power plants will be based on CCS from 2020 on. Compared with the sink capacities, only the CO2 emissions of scenario S2 (30 Gt) could theoretically be stored with high certainty. Considering the scenarios S3 and S1, their CO2 emissions (94 Gt and 171 Gt, respectively) could only be sequestered if the aquifer capacity would prove to be usable. Geological storage sites do not appear to be located close to sources in South West, Central, North and North East India. This first rough analysis means that only those CO2 emissions occurring in the Western parts of North and West India, the Eastern part of South India as well as the South part of East India might be suited for sequestration nearby. A more detailed source-sink matching will follow in the next phase of the project, including results of expert meetings in India. Furthermore, this analysis will be complemented by an additional assessment from economic, ecological and resource-strategic points of view, which might further affect the potential for CCS.

Description: Biogas and bio-methane that are based on energy crops are renewable energy carriers and therefore potentially contribute to climate protection. However, significant greenhouse gas emissions resulting from agricultural production processes must be considered, mainly resulting from agricultural production processes, as fertilizer use, pesticide etc. This paper provides an integrated life cycle assessment (LCA) of biogas (i.e. bio-methane that has been upgraded and injected into the natural gas grid), taking into account the processes of fermentation, upgrading and injection to the grid for two different types of biogas plants thus examining the current state of the art as well as new, large-scale plants, operated by industrial players. Not only technical and engineering aspects are taken into account here, but also the choice of feedstock which plays an important role as to the overall ecological evaluation of bio-methane. The substrates evaluated in this paper - aside from maize - are rye, sorghum, whole-crop-silage from triticale and barley, and the innovative options of agricultural grass (Landsberger Gemenge, a mixture of hairy vetch (vicia villosa), crimson clover (trifolium incarnátum) and Italian ryegrass (lolium multiflorum)) as well as a combination of maize and sunflower.

Description: The North African countries Morocco, Algeria, Tunisia, Libya and Egypt have been and are currently experiencing rapid growth in energy demand. This development confronts their political leaders with the question of how to expand or diversify their countries' generation capacities. In this context, renewable energies and nuclear power constitute options that have rarely been exploited so far in the region. This article analyzes the drawbacks and benefits of both alternatives, with a special focus on import and export dynamics. When attempting to make the strategic decision between renewables and atomic power, North African regional specifics and circumstances have to be taken into account. Hence, in a first step, the article characterizes the energy systems of the North African countries and presents scenarios for their future development. In a second step, it scrutinizes the energy challenges these states face in terms of domestic concerns and foreign affairs. Finally, a case study of Algeria is used to demonstrate how renewable energies, but not nuclear power, are able to respond to North African energy challenges.

Description: The paper suggests a sustainable material footprint of eight tons, per person, in a year as a resource cap target for household consumption in Finland. This means an 80% (factor 5) reduction from the present Finnish average. The material footprint is used as a synonym to the Total Material Requirement (TMR) calculated for products and activities. The paper suggests how to allocate the sustainable material footprint to different consumption components on the basis of earlier household studies, as well as other studies, on the material intensity of products, services, and infrastructures. It analyzes requirements, opportunities, and challenges for future developments in technology and lifestyle, also taking into account that future lifestyles are supposed to show a high degree of diversity. The targets and approaches are discussed for the consumption components of nutrition, housing, household goods, mobility, leisure activities, and other purposes. The paper states that a sustainable level of natural resource use by households is achievable and it can be roughly allocated to different consumption components in order to illustrate the need for a change in lifestyles. While the absolute material footprint of all the consumption components will have to decrease, the relative share of nutrition, the most basic human need, in the total material footprint is expected to rise, whereas much smaller shares than at present are proposed for housing and especially mobility. For reducing material resource use to the sustainable level suggested, both social innovations, and technological developments are required.

Description: This brochure summarises key findings on energy solutions for the preparation and processing of food using local and renewable energy resources. More data, examples and information are available on the internet platform: www.wisions.net

Description: Despite rising prices for natural resources during the past 30 years, global consumption of natural resources is still growing. This leads to ecological, economical and social problems. So far, however, limited effort has been made to decrease the natural resource use of goods and services. While resource efficiency is already on the political agenda (EU and national resource strategies), there are still substantial knowledge gaps on the effectiveness of resource efficiency improvement strategies in different fields. In this context and within the project "Material Efficiency and Resource Conservation", the natural resource use of 22 technologies, products and strategies was calculated and their resource efficiency potential analysed. In a preliminary literature- and expert-based identification process, over 250 technologies, strategies, and products, which are regarded as resource efficient, were identified. Out of these, 22 subjects with high resource efficiency potential were selected. They cover a wide range of relevant technologies, products and strategies, such as energy supply and storage, Green IT, transportation, foodstuffs, agricultural engineering, design strategies, lightweight construction, as well as the concept "Using Instead of Owning". To assess the life-cycle-wide resource use of the selected subjects, the material footprint has been applied as a reliable indicator. In addition, sustainability criteria on a qualitative basis were considered. The results presented in this paper show significant resource efficiency potential for many technologies, products and strategies.

Description: The general conditions for local authorities in Germany have changed fundamentally during the last decades. Not only do municipalities compete with each other for employment, prestige and competitive advantages, they also face increasingly higher demands by their citizens, for instance in the area of climate protection. Therefore, every municipality has to consider various economic, social and ecological determinants in its decision-making processes. With respect to public buildings, an economically-oriented cost-benefit-analysis alone is not adequate due to a municipality's role as "consumer and role model". To identify measures with a broader benefit, a multicriteria analysis (MCA) has been used to analyze energy efficiency measures in public buildings for the city of Dortmund. For several years Dortmund has committed itself to implement energy efficiency measures and improve the energy performance of its building stock. Nevertheless, a benchmark analysis still shows a high energy saving potential that cannot be tapped with the existing measures and instruments. Therefore, a package of measures has been developed in close cooperation with the city of Dortmund, ranging broadly from measures of energetic retrofitting and green IT to behavioral change of building occupants. In the MCA these measures have been assessed according to ten different criteria such as innovativeness, cost effectiveness, external costs, CO2 reduction potential, local value or effort of implementation. Three different scenarios ("City as Role Model", "City as Homo Oeconomicus", "City as Climate Protector") show different municipal perspectives. The analysis has shown that the greatest benefit for municipalities, regardless of the municipal perspective, is yielded by measures such as voluntarily enhanced minimum standards for new or for energetic retrofitting of public buildings, the procurement of energy-efficient office equipment, the expansion of heat generation from renewable energies and the usage of private capital in participatory projects like "Solar&Save".

Description: CCS is discussed in a broad sense throughout Europe. In this paper a cautious, conservative estimate of CO2 storage capacity for Germany and its neighbouring countries where CO2 emissions from Germany could possibly be stored (Netherlands, France, Denmark, Norway, UK and Poland) is presented. Such a lower limit calculation is necessary for orientation purposes for potential investors and political decision-makers. Conservative CO2 sequestration capacity in deep saline aquifers for Germany is derived by the volumetric approach where parameters such as efficiency factor, CO2 density, porosity of the geological formation are of interest. It is assumed that every geological system is closed and thus an efficiency factor of 0.1 per cent (based on maximum pressure increase and total compressibility) for saline aquifers is applied. The capacity of German depleted oil and gas fields is based on cumulative recovery data and a sweep efficiency of 75 per cent. The storage capacity in the other considered countries, adjacent to Germany, are based on a critical review and adjustment of the results of the European reports JOULE II, GESTCO and GeoCapacity. The conservative capacities for all countries together amount to 49 Gt CO2, from which Norway and the UK provide 36 Gt, all offshore in the North Sea. Compared to the emissions from large point sources in these countries during 40 years (47.6 Gt of CO2), a virtual balance is achieved. This can only be reached, if a large scale CO2 pipeline system is installed to connect these countries, especially Germany, to the large sinks in the North Sea. If additional restrictions like source-sink matching, acceptance issues and injection rates constraints are taken into account, the available storage space gets increasingly scarce.

Description: This paper analyses drivers for resource use and material productivity acrosscountries. This is not only relevant in light of soaring raw material prices but also because EU policies, such as the "Thematic Strategy on the Sustainable Use of Natural Resources" (COM [2005] 670), the EU Raw Materials Initiative (COM [2008] 699) and various similar policies internationally, seek to better manage materials along their life-cycle and across economies. In order to better understand the system dynamics of material use, our paper applies methodologies of material flow analysis and regression analysis to identify the major drivers for resource use and decoupling from GDP. Drivers are understood as those factors that exert influence on human activities to use resources. A panel data set is taken for the European Union for the years 1980–2000 (EU-15) and 1992–2000 (EU-25). The main drivers of resource use were found to be energy efficiency, new dwellings and roads construction activities. Shortcomings of the methodology are also discussed.

Description: As illustrated by the case studies of end-of-life vehicles and waste electric and electronic equipment, the approach of an extended producer responsibility is undermined by the exports of used and waste products. This fact causes severe deficits regarding circular flows, especially of critical raw materials such as platinum group metals. With regard to global recycling there seems to be a responsibility gap which leads somehow to open ends of waste flows and a loss or down-cycling of potential secondary resources. Existing product-orientated extended producer responsibility (EPR) approaches with mass-based recycling quotas do not create adequate incentives to supply waste materials containing precious metals to a high-quality recycling and should be amended by aspects of a material stewardship. The paper analyses incentive effects on EPR for the mentioned product groups and metals, resulting from existing regulations in Germany. It develops a proposal for an international covenant on metal recycling as a policy instrument for a governance-oriented framework to initiate systemic innovations along the complete value chain taking into account product group- and resource group-specific aspects on different spatial levels. It aims at the effective implementation of a central idea of EPR, the transition of a waste regime still focusing on safe disposal towards a sustainable management of resources for the complete lifecycle of products.

Description: In the light of the tremendous challenges facing the energy systems of the Middle East and North Africa (MENA), a number of concepts, roadmaps and scenario studies have emerged, describing potential transformation pathways towards a more sustainable, renewable-based, energy supply future in the region. Our article uses the scientific approach of "transition research" to analyze the most pertinent publications and concepts in this field to identify the key drivers and barriers for the transformation of the regional energy systems. The analysis likewise includes an assessment of possible indicators and indexes that can be used to monitor the sustainability of the transformation process of MENA energy systems.

Description: In many developing countries large parts of the population are negatively affected by the lack of access to clean and affordable energy. Providing sustainable energy services to these people has been acknowledged as a key component to reduce poverty. One form of development assistance to address the needs of the energy-poor at the local level are small-scale renewable energy projects. Like all development interventions, these energy projects are not intended to produce short-term outputs, but to create long-term impacts. Thus, it has become increasingly important to evaluate and accurately assess their sustainability. But despite the widely recognized need to identify successes factors and explain failure only few studies exist that address the sustainability of small-scale of energy development efforts post implementation. Against this background the paper presents the results of a post-evaluation of 23 projects supported via the Sustainable Energy Project Support (SEPS) scheme of the WISIONS initiative run by the Wuppertal Institute. The analysis provides insights on the influence that socio-economic, environmental, geographic and gender factors can have on the sustainability of small-scale renewable energy projects in developing countries.

Description: A key challenge of the 21st century is to transform society into one that features sustainable patterns of production and consumption. To achieve this, transition processes need to be designed in key areas such as housing, mobility and nutrition. The design and large-scale implementation of sustainable product service systems (PSS) is regarded a promising approach for sustainability transitions. Real-life socio-technical experiments are an important infrastructure for designing PSS in collaboration with stakeholders and users. In this paper, we argue that transdisciplinary and action research methods are required for institutionalising an experimental set-up and developing PSS within such infrastructures. We present the Sustainable LivingLabs (SLL) research infrastructure and its methodology as an example of such experimental settings. It was collaboratively developed with key stakeholders in three consecutive research projects and applied to e.g. heating and space heating. We show new qualities of SLL in relation to existing LivingLabs and approaches for PSS design and present its methodological three-phase model (insight research, prototyping, field testing) of research. Our article contributes to knowledge on a methodological framework and tool-kit for PSS development in SLL with a clear focus on socio-ecological sustainability. Intermediate findings confirm the high influence of user practices on heating energy consumption and show starting points for PSS development: e.g. transformational products, home-automation combined with consulting along value chains. We hypothesise that developing PSS in user- and stakeholder-integrated settings supports acceptance and diffusion and, by taking into account users' social practices of utilising novelties, reduces rebound effects caused by incorrect application.

Description: In this manual, the consortium wants to share the key lessons we have learnt throughout this three-year project and, by doing so, to contribute to the scaling-up of low carbon city development in emerging economies, especially in China. This manual targets organisations from the scientific and civil society sectors that are involved in international low carbon city projects, especially those with a focus on Chinese cities, as well as local govern-ments that are eager to develop a comprehensive low carbon strategy.

Description: The current flow of carbon for the production, use, and waste management of polymer-based products is still mostly linear from the lithosphere to the atmosphere with rather low rates of material recycling. In view of a limited future supply of biomass, this article outlines the options to further develop carbon recycling (C-REC). The focus is on carbon dioxide (CO2) capture and use for synthesis of platform chemicals to produce polymers. CO2 may be captured from exhaust gases after combustion or fermentation of waste in order to establish a C-REC system within the technosphere. As a long-term option, an external C-REC system can be developed by capturing atmospheric CO2. A central role may be expected from renewable methane (or synthetic natural gas), which is increasingly being used for storage and transport of energy, but may also be used for renewable carbon supply for chemistry. The energy input for the C-REC processes can come from wind and solar systems, in particular, power for the production of hydrogen, which is combined with CO2 to produce various hydrocarbons. Most of the technological components for the system already exist, and, first modules for renewable fuel and polymer production systems are underway in Germany. This article outlines how the system may further develop over the medium to long term, from a piggy-back add-on flow system toward a self-carrying recycling system, which has the potential to provide the material and energy backbone of future societies. A critical bottleneck seems to be the capacity and costs of renewable energy supply, rather than the costs of carbon capture.

Description: Concentrated solar power (CSP) plants are one of several renewable energy technologies with significant potential to meet a part of future energy demand. An integrated technology assessment shows that CSP plants could play a promising role in Africa and Europe, helping to reach ambitious climate protection goals. Based on the analysis of driving forces and barriers, at first three future envisaged technology scenarios are developed. Depending on the underlying assumptions, an installed capacity of 120 GWel, 405 GWel or even 1,000 GWel could be reached globally in 2050. In the latter case, CSP would then meet 13–15% of global electricity demand. Depending on these scenarios, cost reduction curves for North Africa and Europe are derived. The cost assessment conducted for two virtual sites in Algeria and in Spain shows a long-term reduction of electricity generating costs to figures between 4 and 6 ct/kWhel in 2050. The paper concludes with an ecological analysis based on life cycle assessment. Although the greenhouse gas emissions of current (solar only operated) CSP systems show a good performance (31 g CO2-equivalents/kWhel) compared with advanced fossil-fired systems (130–900 CO2-eq./kWhel), they could further be reduced to 18 g CO2-eq./kWhel in 2050, including transmission from North Africa to Europe.

Description: International consensus is growing that a transition towards a low carbon society (LCS) is needed over the next 40 years. The G8, the Major Economies Forum on Energy and Climate, as well as the Ad Hoc Working Group on Long-term Cooperative Action under the United Nations Framework Convention on Climate Change, have concluded that states should prepare their own Low-emission Plans or Low-emission Development Plans and such plans are in development in an increasing number of countries. An analysis of recent long-term low emission scenarios for Germany shows that all scenarios rely heavily on a massive scale up of energy efficiency improvements based on past trends. However, in spite of the high potential that scenario developers assign to this strategy, huge uncertainty still exists in respect of where the efficiency potentials really lie, how and if they can be achieved and how much their successful implementation depends on more fundamental changes towards a more sustainable society (e.g. behavioural changes). In order to come to a better understanding of this issue we specifically examine the potential for energy efficiency in relation to particular demand sectors. Our comparative analysis shows that despite general agreement about the high importance of energy efficiency (EE), the perception on where and how to achieve it differ between the analysed scenarios. It also shows that the close nexus between energy efficiency and non-technical behavioural aspects is still little understood. This leads us to the conclusion that in order to support energy policy decisions more research should be done on energy efficiency potential. A better understanding of its potential would help energy efficiency to fulfil its role in the transition towards a LCS.

Description: Technical innovations can contribute significantly to increase resource efficiency. A selection of 21 examples for resource efficient technologies, products and strategies from the field shows the brochure Resource Efficiency Atlas, which was created in line with the same titled project. Overall the project team analysed several hundred technical solutions and strategies and assessed its possible contributions to increases in resource efficiency. The project was arranged co-operatively by the Fraunhofer Institute for Industrial Engineering IAO, the Trifolium-Beratungsgesellschaft mbH and the Institut für Arbeitswissenschaften und Technologiemanagement of the University Stuttgart. The examples from the brochure and further 70 examples can be seen on the project website www.ressourceneffizenzatlas.de.

Description: The availability of life cycle inventories is one of the biggest challenges for life cycle wide environmental assessment. There are several life cycle assessment (LCA) databases providing inventory data as well as resource and emission profiles of processes for impact assessment methods like ReCiPe or IMPACT 2002+. But the use of these LCA databases for input oriented environmental assessment is very limited as they cover only a part of all relevant input flows. The paper describes current challenges when calculating the input oriented Material Input per Service Unit (MIPS) indicators based on LCA inventory data from the Ecoinvent database. Propositions are made how to address these challenges. As a conclusion, further need of research to reach a full compatibility of LCA databases and the MIPS concept is pointed out.

Description: Within the scope of citizen science projects, crowdsourcing has already expanded into scientific application areas. In this, its scientific potential is only partly exhausted, however. It will be shown that transdisciplinary research is made up in content and structural aspects in such a way that crowdsourcing can fully unfold as a research method through varied participation possibilities, reflective processes and use of contemporary technical possibilities. Furthermore, mutual learning, understanding and the dissemination of knowledge strongly profits from effects that even result automatically in this context. The scientific application of crowdsourcing represented here makes high demands on project management, but it is expected to turn out as an effective research method precisely in the area of transdisciplinary research.

Description: In recent decades, better data and methods have become available for understanding the complex functioning of cities and their impacts on sustainability. This review synthesizes the recent developments in concepts and methods being used to measure the impacts of cities on environmental sustainability. It differentiates between a dominant trend in research literature that concentrates on the accounting and allocation of greenhouse gas emissions and energy use to cities and a reemergence of studies that focus on the direct and indirect material and resource flows in cities. The methodological approaches reviewed may consider cities as either producers or consumers, and all recognize that urban environmental impacts can be local, regional, or global. As well as giving an overview of the methodological debates, we examine the implications of the different approaches for policy and the challenges these approaches face in their application on the field.

Description: At current primary steel production levels, the iron and steel industry will fail to meet the 80% emission reduction target without introduction of breakthrough technologies (Wörtler et al., 2013: 19). The current research analyses the technical and economical long-term potential of innovative primary steel production technologies in Germany throughout 2100. Techno-economic models are used to simulate three innovative ore-based steelmaking routes verses the reference blast furnace route (BF-BOF). The innovative routes in focus are blast furnace with CCS (BF-CCS), hydrogen direct reduction (H-DR), and iron ore electrolysis (EW). Energy and mass flows for the production of one tonne of crude steel (CS) are combined with hypothetical price, cost, and revenue data to evaluate the production routes economically, technically, and environmentally. This is a purely theoretical analysis and hence further external factors that may influence practical implementation or profitability are not considered. Different future developments are considered by using three scenarios, representing an ambitious, a moderate, and a conservative transformation of the German energy sector. In general, looking into the future bares various uncertainties which should be reflected in a suitable manner. According to the present scenario analysis, chances are that with rising prices for coal and CO2 allowances BF-BOF and even BF-CCS become unprofitable by mid-century. With a high share of renewable energy sources and high prices for CO2 allowances, H-DR and EW become economically attractive in the second half of the current century, when BF-based routes are long unprofitable. Energy and raw material efficiency is significantly higher for H-DR and EW and furthermore, the 80% reduction target by 2050 can be achieved in the ambitious scenario. However, high investment costs and high dependency on electricity prices prohibit a profitable implementation before 2030–2040 without further subsidies. EW is the most energy and resource efficient production route. Since continuous electricity is needed for the continuous operation, the electricity costs are 20–40% higher than for H-DR (with high-capacity hydrogen storage units). Even though hydrogen production implies efficiency losses compared to the EW route, the decoupling of hydrogen production from continuous operation of the steel plant through hydrogen storage offers the opportunity to use cheap excess renewable electricity. This makes the H-DR economically and environmentally the most attractive route and provides a crucial contribution to stabilize the grid and to store excess energy in a 100% renewable energy system.

Description: This report details current and potential recycling of critical metals in Waste from Electrical Electronic Equipment (WEEE). The term "critical metals" is used instead of "rare metals" because the concept incorporates not only supply but also demand. The EU needs access to these metals and recycling can be an important part of the supply-strategy. The study shows that the current recycling of critical metals in WEEE is very low, but that the potential amount could be increased threefold within 2015. Improving of the recycling of critical metals requires a variety of initiatives tackling different week point in the overall process: better collection, better pre-processing and end-processing, limiting the export of WEEE or used products out of the EU and better design of the EEE-products. This study shows that data on sales volumes, WEEE composition and the composition of critical metals in EEE is currently insufficient for detailed analysis and monitoring, and addressing this should be a priority. Further, more detailed information on components used in EEE product groups would enable recyclers to identify and access the most materially important components. Dialog between recyclers, smelters and manufacturers could also facilitate product design that supports the recycling process.

Description: Urbanization and climate change are amongst the greatest challenges of the 21st century. In the "Low Carbon Future Cities" project (LCFC), three important problem dimensions are analysed: current and future GHG emissions and their mitigation (up to 2050); resource use and material flows; and vulnerability to climate change. The industrial city of Wuxi has been the Chinese pilot city of the project. To establish the pathway for a low carbon future, it is crucial to understand the current situation and possible future developments. The paper presents the key results of the status quo analysis and the future scenario analysis carried out for Wuxi. Two scenarios are outlined. The Current Policy Scenario (CPS) shows the current most likely development in the area of energy demand and GHG emissions until 2050. Whereas the extra low carbon scenario (ELCS) assumes a significantly more ambitious implementation, it combines a market introduction of best available technologies with substantial behavioural change. All scenarios are composed of sub-scenarios for the selected key sectors. Looking at the per capita emissions in Wuxi, the current levels are already high at around 12 tonnes CO2 per capita compared to Western European cities. Although Wuxi has developed a low carbon plan, the projected results under current policies (CPS) show that the total emissions would increase to 23.6 tonnes CO2 per capita by 2050. If the ELCS pathway was to be adopted, these CO2 emission levels could be reduced to 6.4 tonnes per capita by 2050.