ALBERT

Description: On the Qinghai-Tibetan Plateau, the ecological crisis appears in every physical and social aspect, and typically affects the rangelands on which most local people depend for their livelihood. Until today, however, changes in land use and vegetation cover on this Plateau have not yet been adequately and practically treated in studying the framework of sustainability. This thesis deals first with the basic ecological influences and interactions before reviewing their implications for development. The limitations of an ecological perspective is recognized, but this stems mainly from the misapplication of perspective and should not detract from its value. Ecology is undoubtedly the most basic and pervasive of the many determinants of the pastoral production systems of the high-frigid land. To ignore ecology or to fail to take it into account is to court disaster. The amount of literature reflects the importance of the subject but is not reviewed here in any detail; rather the aim is simply to set the scene for later discussions.

Description: thesis

Description: DFG, SUB Göttingen

Description: Der vorliegende Band 52 der Abhandlungen „Anthropogeographie“ des Instituts für Geographische Wissenschaften der Freien Universität Berlin erfasst mit 54 Beiträgen den wissenschaftlichen Forschungsstand der IGU-Kommission “Urban Development and Urban Life”. Die vorgelegten Fassungen stellen die diskutierte und revidierte Form der Beiträge dar, die während der Jahrestagung der Kommission vom 15. bis 20. August 1994 in Berlin gehalten wurden. Die Tagung selbst stand unter dem Thema “Urban Transition and Quality of Life” und forderte damit in den jeweils zwei Einführungs- und zahlreichen weiterführenden Referaten der drei Arbeitsthemen 1) “Restructuring Urban Systems in Central and Eastern Europe“, 2) “Unemployment and Informal Economy in Cities” und 3) “Urban Identity, City Image and Urban Marketing” zu Bewertungen des Forschungsstandes bzw. kritischen Stellungnahmen durch aktuelle Forschungen heraus.

Description: 〈html〉 〈body〉 〈li〉〈a href="https://gdz.sub.uni-goettingen.de/download/pdf/PPN1030505985/LOG_0004.pdf"〉Titelseite〈/a〉〈/li〉 〈li〉〈a href="https://gdz.sub.uni-goettingen.de/download/pdf/PPN1030505985/LOG_0005.pdf"〉Titelseite〈/a〉〈/li〉 〈li〉〈a href="https://gdz.sub.uni-goettingen.de/download/pdf/PPN1030505985/LOG_0006.pdf"〉Vorwort〈/a〉〈/li〉 〈li〉〈a href="https://gdz.sub.uni-goettingen.de/download/pdf/PPN1030505985/LOG_0007.pdf"〉Foreword〈/a〉〈/li〉 〈li〉〈a href="https://gdz.sub.uni-goettingen.de/download/pdf/PPN1030505985/LOG_0008.pdf"〉Inhaltsverzeichnis〈/a〉〈/li〉 〈/body〉 〈/html〉 〈br〉 〈html〉 〈body〉 〈li〉〈a href="https://gdz.sub.uni-goettingen.de/download/pdf/PPN1030505985/LOG_0009.pdf"〉I. Introduction〈/a〉〈/li〉 〈li〉〈a href="https://gdz.sub.uni-goettingen.de/download/pdf/PPN1030505985/LOG_0010.pdf"〉Reflections Between Urban and University Structures and Planning〈/a〉〈br〉(Dietz, K., Braun, G. O.)〈/li〉 〈li〉〈a href="https://gdz.sub.uni-goettingen.de/download/pdf/PPN1030505985/LOG_0011.pdf"〉Berlin - Metropolis in Transition: The State of Urban Development in 1994〈/a〉〈br〉(Ellger, C.)〈/li〉 〈li〉〈a href="https://gdz.sub.uni-goettingen.de/download/pdf/PPN1030505985/LOG_0014.pdf"〉Planning for the Future of Berlin〈/a〉〈br〉(Branoner, W.)〈/li〉 〈li〉〈a href="https://gdz.sub.uni-goettingen.de/download/pdf/PPN1030505985/LOG_0016.pdf"〉Strategic Planning in Berlin〈/a〉〈br〉(Braun, G. O.)〈/li〉 〈li〉〈a href="https://gdz.sub.uni-goettingen.de/download/pdf/PPN1030505985/LOG_0019.pdf"〉Change in the Urban Structure in the Five New Länder: The Example of Eisenach〈/a〉〈br〉(Cassel, M., Schwaderer, G.)〈/li〉 〈/body〉 〈/html〉 〈br〉 〈html〉 〈body〉 〈li〉〈a href="https://gdz.sub.uni-goettingen.de/download/pdf/PPN1030505985/LOG_0021.pdf"〉II. Restructuring of Inter- and Intra-Urban Systems〈/a〉〈/li〉 〈li〉〈a href="https://gdz.sub.uni-goettingen.de/download/pdf/PPN1030505985/LOG_0022.pdf"〉Questions on Hierarchical Change in Urban Systems in Eastern and Central Europe〈/a〉〈br〉(Rey, V.)〈/li〉 〈li〉〈a href="https://gdz.sub.uni-goettingen.de/download/pdf/PPN1030505985/LOG_0026.pdf"〉Urban and Urban System Development in Central and Eastern Europe〈/a〉〈br〉(Grimm, F.-D., Taege, G.)〈/li〉 〈li〉〈a href="https://gdz.sub.uni-goettingen.de/download/pdf/PPN1030505985/LOG_0030.pdf"〉The Impact of Recent Socio-Political and Economic Changes on the Development of Slovenian Towns〈/a〉〈br〉(Pak, M.)〈/li〉 〈li〉〈a href="https://gdz.sub.uni-goettingen.de/download/pdf/PPN1030505985/LOG_0033.pdf"〉An Urban Evolution Model Applied to Romania's Towns〈/a〉〈br〉(Ianos, I.)〈/li〉 〈li〉〈a href="https://gdz.sub.uni-goettingen.de/download/pdf/PPN1030505985/LOG_0038.pdf"〉Warsaw: Development Problems and Strategies〈/a〉〈br〉(Korcelli, P., Potrykowska, A., Weclawowicz, G.)〈/li〉 〈li〉〈a href="https://gdz.sub.uni-goettingen.de/download/pdf/PPN1030505985/LOG_0039.pdf"〉The Urban System and Emerging Structure: An Application of Gibb's Measure to the Case of India〈/a〉〈br〉(Mookherjee, D.)〈/li〉 〈li〉〈a href="https://gdz.sub.uni-goettingen.de/download/pdf/PPN1030505985/LOG_0041.pdf"〉Reorganisation of the Urban System in Sri Lanka〈/a〉〈br〉(Wanasinghe, D. S.)〈/li〉 〈li〉〈a href="https://gdz.sub.uni-goettingen.de/download/pdf/PPN1030505985/LOG_0046.pdf"〉The Formation of an European Urban System〈/a〉〈br〉(Rozenblat, C., Pumain, D.)〈/li〉 〈li〉〈a href="https://gdz.sub.uni-goettingen.de/download/pdf/PPN1030505985/LOG_0051.pdf"〉On the Impact of Internationalization Process on the Finnish Settlement System〈/a〉〈br〉(Palomäki, M.)〈/li〉 〈li〉〈a href="https://gdz.sub.uni-goettingen.de/download/pdf/PPN1030505985/LOG_0055.pdf"〉Global Perspective of Seoul as a World City in the Region of Pacific Rims〈/a〉〈br〉(Kim, I.)〈/li〉 〈li〉〈a href="https://gdz.sub.uni-goettingen.de/download/pdf/PPN1030505985/LOG_0057.pdf"〉Urban Systems Dynamics: Evidence for the Toronto Urban System: 1930-1991〈/a〉〈br〉(Preston, R. E.)〈/li〉 〈li〉〈a href="https://gdz.sub.uni-goettingen.de/download/pdf/PPN1030505985/LOG_0060.pdf"〉The Growth of Toronto: A Market-Share Approach〈/a〉〈br〉(Simmons, J.)〈/li〉 〈li〉〈a href="https://gdz.sub.uni-goettingen.de/download/pdf/PPN1030505985/LOG_0064.pdf"〉Industrial Restructuring and Urban Development: An Examination in Metropolitan Detroit〈/a〉〈br〉(Sinclair, R.)〈/li〉 〈li〉〈a href="https://gdz.sub.uni-goettingen.de/download/pdf/PPN1030505985/LOG_0067.pdf"〉Counter-Urbanization in Perspective: Images and Reality in Settlement System Change〈/a〉〈br〉(Davies, W.)〈/li〉 〈li〉〈a href="https://gdz.sub.uni-goettingen.de/download/pdf/PPN1030505985/LOG_0069.pdf"〉Urban Region as a Geoeconomic and Geopolitical Unit in "A Europe of Regions"〈/a〉〈br〉(Vartiainen, P.)〈/li〉 〈li〉〈a href="https://gdz.sub.uni-goettingen.de/download/pdf/PPN1030505985/LOG_0070.pdf"〉The Ethnic and Social Division of a World City: The Case of London〈/a〉〈br〉(Petsimeris, P.)〈/li〉 〈li〉〈a href="https://gdz.sub.uni-goettingen.de/download/pdf/PPN1030505985/LOG_0075.pdf"〉Transformation in the South African Apartheid City – Residential Desegregation in Pietersburg: A Case Study〈/a〉〈br〉(Donaldson, S. E., Kotze, N. J.)〈/li〉 〈li〉〈a href="https://gdz.sub.uni-goettingen.de/download/pdf/PPN1030505985/LOG_0078.pdf"〉Intra-Urban Distribution of Ethnic Minorities in Munich and Duisburg〈/a〉〈br〉(Yamamoto, K.)〈/li〉 〈li〉〈a href="https://gdz.sub.uni-goettingen.de/download/pdf/PPN1030505985/LOG_0083.pdf"〉New Urban Poverty in the Basque Country and Navarra〈/a〉〈br〉(Ferrer, M., d’Entremont, A., Ciscar, I., Saracibar, M. A.)〈/li〉 〈li〉〈a href="https://gdz.sub.uni-goettingen.de/download/pdf/PPN1030505985/LOG_0085.pdf"〉Polarization and the Dutch Welfare State. The Case of Amsterdam〈/a〉〈br〉(Ostendorf, W., Musterd, S.)〈/li〉 〈/body〉 〈/html〉 〈br〉 〈html〉 〈body〉 〈li〉〈a href="https://gdz.sub.uni-goettingen.de/download/pdf/PPN1030505985/LOG_0088.pdf"〉III. Informal Economy〈/a〉〈/li〉 〈li〉〈a href="https://gdz.sub.uni-goettingen.de/download/pdf/PPN1030505985/LOG_0089.pdf"〉The Labour Market and the Role of Informality in Urban Mexico〈/a〉〈br〉(Aguilar, A. G.)〈/li〉 〈li〉〈a href="https://gdz.sub.uni-goettingen.de/download/pdf/PPN1030505985/LOG_0092.pdf"〉The Informal Economy in Chinese Cities〈/a〉〈br〉(Qi, S. D.)〈/li〉 〈li〉〈a href="https://gdz.sub.uni-goettingen.de/download/pdf/PPN1030505985/LOG_0093.pdf"〉The Urban Informal Sector: A Third World Experience〈/a〉〈br〉(Geeta Reddy, A., Rajkumar, G.)〈/li〉 〈li〉〈a href="https://gdz.sub.uni-goettingen.de/download/pdf/PPN1030505985/LOG_0094.pdf"〉Informal Urban Economy in the Lake Chad Basin〈/a〉〈br〉(Simeu-Kamdem, M.)〈/li〉 〈/body〉 〈/html〉 〈br〉 〈html〉 〈body〉 〈li〉〈a href="https://gdz.sub.uni-goettingen.de/download/pdf/PPN1030505985/LOG_0095.pdf"〉IV. Recent Urban Processes〈/a〉〈/li〉 〈li〉〈a href="https://gdz.sub.uni-goettingen.de/download/pdf/PPN1030505985/LOG_0096.pdf"〉City Challenge: Involving the Community in UK Urban Policy? 〈/a〉〈br〉(Lewis, J. R.)〈/li〉 〈li〉〈a href="https://gdz.sub.uni-goettingen.de/download/pdf/PPN1030505985/LOG_0098.pdf"〉Intra-Metropolitan Relocation of Work Places: The Case of Stockholm〈/a〉〈br〉(Mahieu, R.)〈/li〉 〈li〉〈a href="https://gdz.sub.uni-goettingen.de/download/pdf/PPN1030505985/LOG_0102.pdf"〉Problems of Mobility and Traffic in the Ruhr〈/a〉〈br〉(Lötscher, L., Fleisgarten, S.)〈/li〉 〈li〉〈a href="https://gdz.sub.uni-goettingen.de/download/pdf/PPN1030505985/LOG_0103.pdf"〉Moscow 1993: The Emergence of Housing Market and the Problems of Intra-Urban Segregation〈/a〉〈br〉(Vendina, O. I.)〈/li〉 〈/body〉 〈/html〉 〈br〉 〈html〉 〈body〉 〈li〉〈a href="https://gdz.sub.uni-goettingen.de/download/pdf/PPN1030505985/LOG_0107.pdf"〉V. Urban Marketing, City Management, Urban Identity〈/a〉〈/li〉 〈li〉〈a href="https://gdz.sub.uni-goettingen.de/download/pdf/PPN1030505985/LOG_0108.pdf"〉Urban Marketing: A Review〈/a〉〈br〉(Borchert, J. G.)〈/li〉 〈li〉〈a href="https://gdz.sub.uni-goettingen.de/download/pdf/PPN1030505985/LOG_0109.pdf"〉Urban Identity, City Image and Urban Marketing〈/a〉〈br〉(Dematteis, G.)〈/li〉 〈li〉〈a href="https://gdz.sub.uni-goettingen.de/download/pdf/PPN1030505985/LOG_0110.pdf"〉The Hidden Faces of the City〈/a〉〈br〉(Racine, J.-B.)〈/li〉 〈li〉〈a href="https://gdz.sub.uni-goettingen.de/download/pdf/PPN1030505985/LOG_0111.pdf"〉The City of Bergen. Image and Marketing〈/a〉〈br〉(Sjøholt, P.)〈/li〉 〈li〉〈a href="https://gdz.sub.uni-goettingen.de/download/pdf/PPN1030505985/LOG_0113.pdf"〉Structural Underpinnings of an Olympic City Bid〈/a〉〈br〉(Davies, R. J.)〈/li〉 〈li〉〈a href="https://gdz.sub.uni-goettingen.de/download/pdf/PPN1030505985/LOG_0116.pdf"〉Double Cities: Identity and Marketing of a New Urban Product〈/a〉〈br〉(Buursink, J.)〈/li〉 〈li〉〈a href="https://gdz.sub.uni-goettingen.de/download/pdf/PPN1030505985/LOG_0118.pdf"〉Corporate Space and Emerging Spatial Order in Japan〈/a〉〈br〉(Fujita, N.)〈/li〉 〈li〉〈a href="https://gdz.sub.uni-goettingen.de/download/pdf/PPN1030505985/LOG_0125.pdf"〉The Development of International Tourism in Tallinn, Estonia〈/a〉〈br〉(Kuus, M.)〈/li〉 〈li〉〈a href="https://gdz.sub.uni-goettingen.de/download/pdf/PPN1030505985/LOG_0126.pdf"〉Conflict, Consent, Cooperation: Comprehensive Planning in Germany Beyond Market and State〈/a〉〈br〉(Helbrecht, I.)〈/li〉 〈li〉〈a href="https://gdz.sub.uni-goettingen.de/download/pdf/PPN1030505985/LOG_0127.pdf"〉Urban Strategies: Mega Events. A Copenhagen Perspective〈/a〉〈br〉(Thor Andersen, H., Wichmann Matthiessen, C.)〈/li〉 〈li〉〈a href="https://gdz.sub.uni-goettingen.de/download/pdf/PPN1030505985/LOG_0129.pdf"〉From Spaces of Planning to Places of Resistance〈/a〉〈br〉(Haarni, T.)〈/li〉 〈/body〉 〈/html〉 〈br〉 〈html〉 〈body〉 〈li〉〈a href="https://gdz.sub.uni-goettingen.de/download/pdf/PPN1030505985/LOG_0132.pdf"〉VI. Re-Cycling Urban Landscape〈/a〉〈/li〉 〈li〉〈a href="https://gdz.sub.uni-goettingen.de/download/pdf/PPN1030505985/LOG_0133.pdf"〉The Role of Gentrification in the Changing Ecology of Income: Evidence From Canadian Cities and Implications for Further Research〈/a〉〈br〉(Bourne, L. S.)〈/li〉 〈li〉〈a href="https://gdz.sub.uni-goettingen.de/download/pdf/PPN1030505985/LOG_0134.pdf"〉Gentrification and the Youth Movements of the 1960s〈/a〉〈br〉(Ley, D.)〈/li〉 〈li〉〈a href="https://gdz.sub.uni-goettingen.de/download/pdf/PPN1030505985/LOG_0135.pdf"〉Recycling Urban Landscapes - Beyond the Power〈/a〉〈br〉(Andersson, H.)〈/li〉 〈li〉〈a href="https://gdz.sub.uni-goettingen.de/download/pdf/PPN1030505985/LOG_0136.pdf"〉Why was the Central City Population Stabilized? The Case of Copenhagen〈/a〉〈br〉(Illeris, S.)〈/li〉 〈li〉〈a href="https://gdz.sub.uni-goettingen.de/download/pdf/PPN1030505985/LOG_0138.pdf"〉Toronto's Underground City: Excavating the Terms of Access〈/a〉〈br〉(Hopkins, J.)〈/li〉 〈li〉〈a href="https://gdz.sub.uni-goettingen.de/download/pdf/PPN1030505985/LOG_0140.pdf"〉The Interpretation of Sea in Urban Planning and Everyday Life: The Case of Helsinki〈/a〉〈br〉(Karvinen, M.)〈/li〉 〈li〉〈a href="https://gdz.sub.uni-goettingen.de/download/pdf/PPN1030505985/LOG_0141.pdf"〉Urban Destinies - What are the Trends?〈/a〉〈br〉(Wärneryd, O.)〈/li〉 〈/body〉 〈/html〉 〈br〉 〈html〉 〈body〉 〈li〉〈a href="https://gdz.sub.uni-goettingen.de/download/pdf/PPN1030505985/LOG_0142.pdf"〉VII. Urban Modelling〈/a〉〈/li〉 〈li〉〈a href="https://gdz.sub.uni-goettingen.de/download/pdf/PPN1030505985/LOG_0143.pdf"〉DUVA – A Concept for a Metadata Driven Statistical Production and Information System〈/a〉〈br〉(Kopp, N.)〈/li〉 〈li〉〈a href="https://gdz.sub.uni-goettingen.de/download/pdf/PPN1030505985/LOG_0145.pdf"〉A New Era for Urban Modelling?〈/a〉〈br〉(Pumain, D.)〈/li〉 〈li〉〈a href="https://gdz.sub.uni-goettingen.de/download/pdf/PPN1030505985/LOG_0146.pdf"〉Competing Order Parameters in a Self-Organizing City〈/a〉〈br〉(Portugali, J., Benenson, I.)〈/li〉 〈/body〉 〈/html〉 〈br〉 〈html〉 〈body〉 〈li〉〈a href="https://gdz.sub.uni-goettingen.de/download/pdf/PPN1030505985/LOG_0150.pdf"〉Authors and Addresses〈/a〉〈/li〉 〈li〉〈a href="https://gdz.sub.uni-goettingen.de/download/pdf/PPN1030505985/LOG_0151.pdf"〉[Werbung]〈/a〉〈/li〉 〈/body〉 〈/html〉

Description: conference

Description: DFG, SUB Göttingen

Description: Since the 14th century, moderate seismic activity with 14 earthquakes of magnitude MW≥5.0 occurred in Western Europe in a region extending from the Lower Rhine Graben (LRG) to the southern North Sea. In this paper, we investigate how well this seismic activity could reflect that of the future. The observed earthquake activity in the LRG is continuous and concentrates on the Quaternary normal faults delimiting the LRG, which are also the source of large surface rupturing Holocene and Late Pleistocene earthquakes. The estimated magnitudes of these past earthquakes range from 6.3±0.3 to 7.0±0.3 while their average recurrence on individual faults varies from ten thousand to a few ten thousand years, which makes foreseeing future activity over the long-term possible. Three of the largest historical earthquakes with MW≥5.5 occurred outside the LRG. Late Quaternary activity along the fault zones suspected to be the source of two of these earthquakes, i.e. the 1580 Strait of Dover and 1692 northern Belgian Ardennes earthquakes, is very elusive if it exists. Hence, similar earthquakes would be very infrequent at these locations suggesting that the seismicity outside of the LRG would be episodic and clustered on some faults during periods of a few hundreds of years interrupted by long periods of inactivity typically lasting for some tens to hundreds of thousand years. Seismic moment release estimation and its comparison between recent geological and historical seismicity periods lead us to suggest that the high seismicity level observed between AD 1350 and AD 1700 west of the LRG would be uncommon.

Description: research

Description: In the weekly newspaper of Osnabrück (Germany) of November 3, 1770, a report about a local earthquake was published. Pastor Buck described ground motion effects in the manor ‘Haus Horst’, 1.5 km away from the village of Alfhausen: ‘roof tiles rattled, a chimney fell down, inside the house the top of a stove was overturned, abraded chalk trickled down in all rooms; in the nearby villages, people felt the shaking, and especially the churches suffered noticeably’. The epicentral intensity was estimated to VII (MSK) by Ahorner et al. (1970), but later modified to VI (EMS) by Meier & Grünthal (1992) considering Buck’s report in detail. Since this event is the only documented earthquake in this region, a reliable characterization of its parameters is important. Our re-examination reveals that some reported effects are quite contradictory. Contrary to Buck’s statement, no documents of damages on churches or costs of repairs could be found in the parish registers. As a result, the event appears to be a tectonic earthquake with an epicenter at Alfhausen / Haus Horst. Applying intensity-attenuation relationships, a revised value of the epicentral intensity of I_0≤V (EMS-98) with a focal depth of z≥2 km was derived. A cavity collapse due to leaching processes as a cause of the effects can be ruled out here. However, several details given in the primary source turned out to be unrealistic or at least exaggerated. The tectonic earthquake on September 3, 1770 near Alfhausen should be classified therefore as uncertain or even doubtful.

Description: research

Description: Central Europe is an intraplate domain which is characterized by low to moderate seismicity with records of larger seismic events occurring in historical and recent times. These records of seismicity are restricted to just over one thousand years. This does not reflect the long seismic cycles in Central Europe which are expected to be in the order of tens of thousands of years. Therefore, we have developed a paleoseismic database (PalSeisDB) that documents the records of paleoseismic evidence (trenches, soft-sediment deformation, mass movements, etc.) and extends the earthquake record to at least one seismic cycle. It is intended to serve as one important basis for future seismic hazard assessments. In the compilation of PalSeisDB, paleoseismic evidence features are documented at 129 different locations in the area of Germany and adjacent regions.

Description: research

Description: Current procedures to collect macroseismic data in Germany are diverse and scattered. At least 10 institutions collect macroseismic data by internet. Several institutes have a long tradition in seismology and have collected macroseismic data using paper forms for many decades. In addition, the responsibilities for geoscientific issues in Germany are a matter of the federal states and several of them have a state earthquake service. The only institution that automatically calculates and maps intensities online in near real time is Erdbebenstation Bensberg in cooperation with the Royal Observatory of Belgium. Baden-Württemberg uses a short form internet questionnaire at the moment. 5 state earthquake services (Bayern, Hessen, Niedersachsen, Rheinland-Pfalz, Sachsen) have implemented the standard German earthquake questionnaire (Kaiser 2014) which is adapted from the standard questionnaire developed by the ESC Working Group on Internet Macroseismology published by Musson & Cecić (2012). Most institutions express their strong need to implement standard procedures for automatic intensity assignment and a standard format for the exchange of questionnaire responses. References Kaiser, D. (2014): Der neue einheitliche Erdbeben-Fragebogen. Mitteilungen / Deutsche Geophysikalische Gesellschaft, 2/2014, 29-33. Musson, R. M. W. & Cecić, I. (2012): Intensity and Intensity Scales. In: New Manual of Seismological Observatory Practice 2 (NMSOP-2).- Deutsches GeoForschungsZentrum GFZ, 1-41; Potsdam. doi:10.2312/GFZ.NMSOP-2_ch12

Description: lecture

Description: We develop empirical relationships between the surface wave magnitude MS and macroseismic data, i.e. the epicentral intensity I0, isoseismal radii R(I) of different intensities I and the focal depth h. The basis of this study is formed by carefully selected instrumental parts (since 1900) of 2 earthquake catalogues: Kárník 1996 (Europe and the Mediterranean), and Shebalin et al. 1998 (Central and Eastern Europe). We use the orthogonal regression because we presume that all parameters are in error and because it has the advantage to provide a reversible regression equation. From Shebalin et al.1998 catalogue we obtain MS = 0.65 I0 + 1.90 log(h) – 1.62 with equivalent error δMS = ±0.21. In order to establish a relationship between MS and isoseismal radii we apply a theoretically based model which takes into account both exponential decay and geometrical spreading. From Shebalin et al. 1998catalogue we find MS = 0.673 I + 2.44 log (S(I)) + 0.00163 S(I) – 2.48 with δMS = ±0.28. Here I is the macroseismic intensity (I = 3…9) of the isoseismal in the focal distance S(I) [km]. Kárník 1996 gives isoseismal radii for I = 3 and 5. We obtain: MS = 0.808 I + 2.84 log (S(I)) + 0.00190 S(I) – 3.71 with δMS = ±0.65. These equations make possible reliably estimates of MS . We recommend them for application. The use of high quality data only as input in the regression analysis provides reliable relationships to estimate magnitudes. The magnitude estimation of a historical earthquake from the epicentral intensity gives reliable results only if the focal depth is known well enough. The relationship using isoseismal radii is of greater practical importance as it allows more reliable magnitude estimations of historical earthquakes. We observe regional variations in the relationships which need further investigation.

Description: poster

Description: The earthquake catalogue of southwestern Germany for the last millennium now contains about 30,000 digital macroseismic intensity data points (IDPs). Intensity assessments are based mainly on primary sources using the European Macroseismic Scale 1998 (EMS). The article describes a guideline for best practice of conventional macroseismic evaluation in application to historical and modern-time earthquakes in SW-Germany. Suitability of various diagnostics for intensity assessment is discussed. Assumptions to estimate damage grades and vulnerability classes of buildings are presented. Data restrictions and treatment of special cases are outlined. Further topics are quantification of uncertainties and IDP quality as well as substitutes for intensity. An essential task is to bridge the gap between information from historical sources and seismological needs for use in the earthquake catalogue, thus all issues have a focus on historical earthquakes. Questions of completeness, subjectivity, transparency, and interdisciplinary work are addressed also. Special emphasis is given to a well balanced use of the EMS scale throughout all time periods leading to consistent assessments in the catalogue.

Description: research

Description: Geometric 3D models are a very efficient tool to visualize geological units and structural features that have been presented before just in two dimensions on maps or cross-sections. Most of the information of 3D models is presented as 3D views, virtual wells or horizontal or vertical cross-sections. However, are there further options to transfer as much as possible of the complex information of a 3D model in an adequate way to the user? Is it useful and promising to analyse 3D objects like surfaces or volumes in GIS software? In our investigation we performed a GIS based analysis of an existing geotechnical-geological 3D model of periglacial sediments. The two steps were multiple raster calculations to create geotechnical maps and a digital analysis of surface parameters based on geomorphological techniques and statistics. The investigation area is located in southern Lower Saxony and covers the city of Goettingen and surrounding regions within the valley of the river Leine. The valley is filled by unconsolidated, periglacial sediments of Quaternary age with a variable thickness ranging from 1 to 70 m. The analysed 3D model was constructed with GoCAD in a former project (Nix et al. 2009). The model is based on a heterogenous dataset comprising well data, thematic maps, and outcrop descriptions. Finally, the surfaces and volumes of the following units were modelled, with a special focus on their different geotechnical properties: (1) anthropogenic material, (2) floodplain and slope deposits, (3) freshwater limestone, peat and organic clay, (4) loess, displaced loess, and loess loam, (5) fluvial gravel, (6) outwash fan material, (7) solifluction material, (8) mixed, hetereougenous fillings of subrosion sinks and (9) the surface of the underlying hardrocks. Each top and bottom surface of the Gocad volumes was exported as raster file with additional information stored in an associated attribute table. In ArcGIS various geoprocessing tools were used to calculate and analyse these rasters and to develope thematic geotechnical and geological maps. The geomorphological analysis was subdivided in several steps. Firstly, the surfaces were described visually, concerning their outline, shape and distribution, as well as superficial structures like distinct edges, holes, channels. Secondarily, descriptive statistic parameters of thickness, area and elevation of each surface were calculated. Thirdly, geoprocessing tools of the Spatial Analyst were performed on each surface. Finally, several surfaces were combined to analyse them together, calculating ratios and overlay combinations. Seven thematical geoengineering and geological maps were created, each of them presenting one portion of the three-dimensional dataset: Map of the stratigraphy and depth of the Quaternary base, Map of the thickness of the Quaternary sediments, Distribution map of model units 1 m below ground level, Distribution map of model units 2 m below ground level, Maps of types of different foundation soils, Distribution map of sediments with low loading capacity and Map of distribution and quality of the wells. While the map creation focused on the geotechnical aspects of the model, the applied geomorphological analysis revealed various parameters and values that are related to the geological formation of the model units. Despite the complex dataset represented by the analysed 3D model, thematical information could be transfered into 2D as thematic maps. Some geological characteristics and parameters of the model units were extracted by the descriptive and GIS-based analysis. References Nix, T., Wagner, B., Lange, T. , Fritz, J., Sauter, M. (2009): 3D-Baugrundmodell der quartären Sedimente des Leinetals bei Göttingen. – 17. Tagung für Ingenieurgeologie, S. 223-227, Zittau

Description: poster

Description: The mineralogy, chemical composition, and physical properties of cratonic mantle eclogites with oceanic crustal protoliths can be modified by secondary processes involving interaction with fluids and melts, generated in various slab lithologies upon subduction (auto‐metasomatism) or mantle metasomatism after emplacement into the cratonic lithosphere. Here we combine new and published data to isolate these signatures and evaluate their effects on the chemical and physical properties of eclogite. Mantle metasomatism involving kimberlite‐like, ultramafic carbonated melts (UM carbonated melts) is ubiquitous though not pervasive, and affected between ~20% and 40% of the eclogite population at the various localities investigated here, predominantly at ~60–150 km depth, overlapping cratonic midlithospheric seismic discontinuities. Its hallmarks include lower jadeite component in clinopyroxene and grossular component in garnet, an increase in bulk‐rock MgO ± SiO2, and decrease in FeO and Al2O3 contents, and LREE‐enrichment accompanied by higher Sr, Pb, Th, U, and in part Zr and Nb, as well as lower Li, Cu ± Zn. This is mediated by addition of a high‐temperature pyroxene from a UM carbonated melt, followed by redistribution of this component into garnet and clinopyroxene. As clinopyroxene‐garnet trace‐element distribution coefficients increase with decreasing garnet grossular component, clinopyroxene is the main carrier of the metasomatic signatures. UM carbonated melt‐metasomatism at 〉130–150 km has destroyed the diamond inventory at some localities. These mineralogical and chemical changes contribute to low densities, with implications for eclogite gravitational stability, but negligible changes in shear‐wave velocities, and, if accompanied by H2O‐enrichment, will enhance electrical conductivities compared to unenriched eclogites.

Description: Plain Language Summary: Oceanic crust formed at spreading ridges is recycled in subduction zones and undergoes metamorphism to eclogite. Some of this material is captured in the overlying lithospheric mantle, where it is exhumed by passing magmas. Having formed in spreading ridges, these eclogites have proven invaluable archives for the onset of plate tectonics, for the construction of cratons during subduction/collision, as probes of the convecting mantle from which their precursors formed, and as generators of heterogeneity upon recycling into Earth's convecting mantle. During subduction and until exhumation, interaction with fluids and melts (called metasomatism) can change the mineralogy, chemical composition, and physical properties of mantle eclogites, complicating their interpretation, but a comprehensive study of these effects is lacking so far. We investigated mantle eclogites from ancient continents (cratons) around the globe in order to define hallmarks of metasomatism by subduction‐related fluids and small‐volume ultramafic carbonated mantle melts. We find that the latter is pervasive and occurs predominantly at midlithospheric depths where seismic discontinuities are detected, typically causing diamond destruction and a reduction in density. This has consequences for their gravitational stability and for the interpretation of shearwave velocities in cratons.

Description: Key Points: Exploration of metasomatic effects during subduction of ancient oceanic crust and after its emplacement into cratonic lithospheric mantle. Metasomatism by kimberlite‐like ultramafic melt affected between 20% and 40% of mantle eclogite suites worldwide, mostly at 2–5 GPa. Metasomatism lowers FeO, hence density in eclogite; no significant effect on shearwave velocities.

Description: German Research Foundation http://dx.doi.org/10.13039/501100001659

Description: National Research Foundation (NRF) http://dx.doi.org/10.13039/501100001321

Description: Wilhelm and Else Heraeus Foundation http://dx.doi.org/10.13039/501100011618

Description: Deutsche Forschungsgemeinschaft (DFG, INST

Description: research

Description: Considering the importance of migration research and the dearth in literature on migration, the following study has been done, with the intention of examining the complex interrelation between internal migration and the development process in Bangladesh. Thereby, emphasis has been given to the investigation and analysis of the causes of rural-urban migration and its spatial as well as socioeconomic consequences, with examples from Dhaka. To construct a framework for the present study, some consideration has been given to both theoretical as well as empirical studies on internal migration. The discussion of general theories which follows in the next section, has mainly been done to assess the validity of these in the analysis of internal migration in the Third World countries.

Description: research

Description: DFG, SUB Göttingen

Description: Pyrroloquinoline quinone (PQQ) is an important cofactor of calcium‐ and lanthanide‐dependent alcohol dehydrogenases, and has been known for over 30 years. Crystal structures of Ca–MDH enzymes (MDH is methanol dehydrogenase) have been known for some time; however, crystal structures of PQQ with biorelevant metal ions have been lacking in the literature for decades. We report here the first crystal structure analysis of a Ca–PQQ complex outside the protein environment, namely, poly[[undecaaquabis(μ‐4,5‐dioxo‐4,5‐dihydro‐1H‐pyrrolo[2,3‐f]quinoline‐2,7,9‐tricarboxylato)tricalcium(II)] dihydrate], {[Ca3(C14H3N2O8)2(H2O)11]·2H2O}n. The complex crystallized as Ca3PQQ2·13H2O with Ca2+ in three different positions and PQQ3−, including an extensive hydrogen‐bond network. Similarities and differences to the recently reported structure with biorelevant europium (Eu2PQQ2) are discussed.

Description: Pyrroloquinoline quinone (PQQ) is an important cofactor of calcium‐ and lanthanide‐dependent alcohol dehydrogenases. The crystal structure of a Ca–PQQ complex (Ca3PQQ2·13H2O) is reported for the first time outside a protein environment. image

Description: research

Description: Induced earthquakes are of public concern and of legal significance if they are felt or if they cause damage. Models to describe the relation between macroseismic intensities, magnitude, and distance from the epicenter or hypocenter are therefore of fundamental importance. With the aim of developing such models for induced earthquakes in Germany, the following data were analyzed: The earthquake database for Germany GERSEIS contains parameters for ~180 induced seismic events with information on magnitude M and intensity I, of which 47 include information on mean isoseismal radii. In addition, the published macroseismic maps of seismic events in mining areas in Germany were evaluated. In Germany, earthquakes caused by mining with moderate to severe building damage (intensity 7 and 8) have so far only occurred in potash and salt mining. Slight building damage (intensity 6) has also been caused by seismic events in coal mining. Over the past 20 years, the frequency of felt earthquakes has increased in regions with natural gas production and in recent years also in regions of deep geothermal energy production. Focal depths show a large influence on the relationship between M and I. Intensity 5 has been observed for shallow (~1 km depth) events with magnitudes as small as ML=1.8. Simple models of the form I = a + b M + c log R, with R = hypocentral distance, can be fitted to the observations. Models for tectonic earthquakes do not fit for induced earthquakes; for induced earthquakes I is smaller for a given M and R. Major differences were found between different mining areas: In natural gas production areas intensity 5 effects were observed at greater hypocentral distances for a given magnitude, compared to coal and potash mining areas. Since macroseismic data (especially intensity data points) in Germany are available almost exclusively in analog form and are often difficult to access, it is necessary to establish a database for induced earthquakes with macroseismic data.

Description: research

Description: In Structural Geology, many projects start with intensive field-based data acquisition campaigns, which might be performed in quite different types of natural or artificial outcrops. For some years, this field work has been substantially influenced and transformed by various close-range sensing techniques that allow the field geologist to create a digital outcrop model (DOM) and to take along plenty of geometrical and spectral information about the outcropping rocks. In general, DOMs can be utilized for outcrop visualization, documentation, manual outcrop analysis (“point-picking”), extraction of spectral data and/or semi-automatic extraction of geometric data. Within a structural investigation DOMs might be deployed for fold analysis, fault analysis, extraction of fracture networks, fracture roughness estimation, detection of neotectonic activities or digitization of geological features for 3D-models of various scales resulting in a large number of analyzing techniques. Latter might be carried out on point clouds or meshes (with or without spectral information) and may differ in pre-processing and processing steps as well as in software solution. Therefore, the analyzing structural geologist faces various tools, data formats, file types, operations and outcomes. Our investigation focus on the compilation of useful, transparent, sustainable and comparable workflows or “pipelines”, which can be executed by open-source/open-access solutions.

Description: poster

Description: Apart from the traditional contribution of geographers to the study of population, this particular thesis attempts to divert the emphasis of geographical enquiry towards the examination of how particular innovations affect the population distribution and the organization of human society. It deals specifically with questions concerning the demographic, social and economic impact of population mobility on both sending in receiving areas. It attempts to shed light on the different variables that work to produce a selective type of population mobility within a particular socio—economic set-up. Although various aspects of population mobility have been studied in some detail during the present decade, no attempt has been made, however, towards a concrete presentation of its multiple causes and its socio-economic impact on the areas and people that are left behind. Far from assuming complete coverage of all interrelated fields of study we attempt here to draw attention t0 the expected socio-economic repercussions of population mobility as induced by a particular factor, namely agricultural mechanization. Certain limitations‚ however, have made it difficult to deal with every aspect of population mobility in the Sudan.

Description: thesis

Description: DFG, SUB Göttingen

Description: Jede Gesellschaft (und jede Stadtregion) muss auf die Auswirkungen dieser Transformation (erhöhte Wohnraumnachfrage, schnelles Wirtschaftswachstum, starkes Dezentralisierungspotential neuer Technologien, drohender Bedeutungsverlust der Kernstadt) reagieren. Wir betrachten im Rahmen dieser Arbeit räumliche Entwicklungen als "kulturelle“ Antwort auf solche Veränderungen. Denn während der ökonomische und technologische Wandel ein eher universelles Phänomen darstellt, unterscheiden sich doch die Strategien zur räumlichen Handhabung und Gestaltung von Wachstum von Land zu Land enorm. So gesehen ist die uns umgebende Realität von Suburbanisierung und Dezentralisierung eben auch das Resultat von Entscheidungen, die unter spezifischen politischen und ideologischen Bedingungen getroffen worden sind. Für die Analyse der Wachstumsideologien haben wir drei westliche Industriestaaten ausgewählt: Kanada, die USA und die Bundesrepublik Deutschland. Dabei wurden sowohl die lokale bzw. regionale als auch die Ländern Provinz- bzw. Bundesebene untersucht. Für die lokale Ebene wurden Flächennutzungsmaßnahmen und statistische Wachstumsindikatoren von sechs "Fallbeispielen" analysiert und verglichen: Frankfurt/M.‚ München, Toronto, Vancouver, San Francisco und Los Angeles/San Diego. Für die überregionale Ebene ergänzt ein Vergleich staatlicher Steuerungsmaßnahmen die Analyse und Interpretation lokaler Trends.

Description: thesis

Description: DFG, SUB Göttingen

Description: This publication developed from the 5th International Colloquium on “Historical Earthquakes, Paleoseismology, Neotectonics and Seismic Hazard” which was held from 11 to 13 October 2017 at the Federal Institute for Geosciences and Natural Resources (BGR) in Hannover, Germany. It comprises four contributions: Brüstle, W., Braumann, U., Hock, S. & Rodler, F.-A. (2020). Best practice of macroseismic intensity assessment applied to the earthquake catalogue of southwestern Germany. In: Kaiser, D. (Ed.). Historical Earthquakes, Paleoseismology, Neotectonics, and Seismic Hazard: New Insights and Suggested Procedures, DGEB-Publikation 18, Deutsche Gesellschaft für Erdbebeningenieurwesen und Baudynamik. doi: 10.23689/fidgeo-3864 Camelbeeck, T., Vanneste, K., Verbeeck, K., Garcia-Moreno, D., Van Noten, K. & Lecocq, T. (2020). How well does known seismicity between the Lower Rhine Graben and southern North Sea reflect future earthquake activity? In: Kaiser, D. (Ed.). Historical Earthquakes, Paleoseismology, Neotectonics, and Seismic Hazard: New Insights and Suggested Procedures, DGEB-Publikation 18, Deutsche Gesellschaft für Erdbebeningenieurwesen und Baudynamik. doi: 10.23689/fidgeo-3866 Hürtgen, J., Reicherter, K., Spies, T., Geisler, C. & Schlittenhardt, J. (2020). The Paleoseismic Database of Germany and Adjacent Regions PalSeisDB v1.0. In: Kaiser, D. (Ed.). Historical Earthquakes, Paleoseismology, Neotectonics, and Seismic Hazard: New Insights and Suggested Procedures, DGEB-Publikation 18, Deutsche Gesellschaft für Erdbebeningenieurwesen und Baudynamik. doi: 10.23689/fidgeo-3867 Leydecker, G. & Lehmann, K. (2020). The earthquake of September 3, 1770 near Alfhausen (Lower Saxony, Germany): a real, doubtful, or a fake event? In: Kaiser, D. (Ed.). Historical Earthquakes, Paleoseismology, Neotectonics, and Seismic Hazard: New Insights and Suggested Procedures, DGEB-Publikation 18, Deutsche Gesellschaft für Erdbebeningenieurwesen und Baudynamik. doi: 10.23689/fidgeo-3865

Description: Introduction to DGEB-Publikation Nr. 18 Deutsche Gesellschaft für Erdbebeningenieurwesen und Baudynamik (DGEB)

Description: editorial

Description: Quantitative fold structure analyses at different scales are essential for deducing deformation mechanisms and the reconstruction of the deformation history of orogens. However, not only the field surveying of fold structures, especially in view of their quantification in three dimensions with the classical tools as measuring tape, grid mapping with measuring tapes, geological compass, field book and camera is a time consuming and laborious job, but also the construction of a georeferenced 3D-model of fold structures based on classical data. Another crucial aspect of the classical field surveying of folds is the limitation by poor outcrop conditions. Reasons might be restricted or no accessibility due to high outcrop walls, water or fences, limited visibility because of vegetation, difficult measurability due to very smooth walls or complexity as a result of irregular outcrop walls or distant outcrops. Furthermore, inappropriate oriented outcrop surfaces in respect to the fold geometry can make a survey even worse. Over the past years modern 3D surveying techniques like terrestrial Lidar and digital photogrammetry became progressively affordable for geological field work and now start to complement or replace traditional methods. We started to utilize these techniques on fold structure surveying and to apply quantitative fold structure analysis on different outcrop settings in Central Germany. Different workflows were developed and tested to optimize data conversion, handling and representation. We applied a laser scanner and a single lens reflex camera, complemented by a differential GPS device and laser tachymeter. Data conversion, correction and analysis were done by means of different free as well as commercial software packages. To test different outcrop situations, different quarries, salt mines and steep cliffs, exposing from single fold to complex folds in limestone, greywacke, cherts, rock salt or potassium salt, were selected. As a result, exact 3D point clouds of all exposed folds could be generated by the use of both techniques. The resultant point clouds are suited as excellent visualisation objects as well as base for accurate geometrical measurements in the range of mm or cm of single and complex folds. In addition, the point clouds serve as input dataset for the construction of detailed geological 3D models comprising punctual, linear and plane fold elements. In summary, terrestrial Lidar and digital photogrammetry are excellent field techniques to survey and document exposed folds in the range of few meters to tens of meters, especially under poor outcrop conditions. Different fold sections can now easily be correlated in 3D space to construct complete fold structures with their 3D-fold geometry. Certain fold elements, e.g. axial planes, can be reconstructed much faster and much more accurate compared to the classical approach. The only limiting factor are the very large datasets and the processing power. As next steps, we seek (1) to involve drones for completing data sets from inaccessible areas and perspectives and (2) to incorporate 3D-microfabric analysis data in the fold models as e.g. grain shape an crystallographic preferred orientations to better understand stain paths and deformation mechanisms.

Description: poster

Description: Under certain conditions, ocean surface gravity waves (SGW) interact with the seafloor underneath to trigger relatively faint but measurable seismic waves known as ocean microseisms. Cyclonic storms (e.g. hurricanes, typhoons) wandering over the ocean are major (non-stationary) sources of the former, thus opening the possibility of tracking and studying cyclones by means of their corresponding microseims. For this purpose, we identified storm-related microseisms hidden in the ambient seismic wavefield via array processing. Polarization beamforming, a robust and well-known technique is implemented. The analyses hinge on surface waves (Love and Rayleigh) which, in contrast to P-waves, are stronger but only constrain direction of arrival (without source remoteness). We use a few land-based virtual seismic arrays surrounding the North Atlantic to investigate the signatures of major hurricanes in the microseismic band (0.05-0.16 Hz), in a joint attempt to continuously triangulate their tracks. Our findings show that storm microseisms are intermittently excited with modulated amplitude at localized oceanic regions, particularly over the shallow continental shelves and slopes, having maximum amplitudes virtually independent of storm category. In most cases no detection was possible over deep oceanic regions, nor at distant arrays. Additionally, the rear quadrants and trailing swells of the cyclone provide the optimum SGW spectrum for the generation of microseisms, often shifted more than 500 km off the "eye". As a result of the aforementioned and added to the strong attenuation of storm microseisms, the inversion of tracks or physical properties of storms using a few far-field arrays is discontinuous in most cases, being reliable only if benchmark atmospheric and/or oceanic data is available for comparison. Even if challenging due to the complexity of the coupled phenomena responsible for microseisms, the inversion of site properties, such as bathymetric parameters (e.g. depth, seabed geomorphology), near- bottom geology or SGW spectrum might be possible if storms are treated as natural sources in time-lapse ambient noise investigations. This will likely require near-field (land and underwater) observations using optimal arrays or dense, widespread sensor networks. Improved detection and understanding of ocean microseisms carries a great potential to contribute to mechanically coupled atmosphere-ocean-earth models.

Description: Universität Hamburg

Description: poster

Description: In order to ensure security of supply in a future energy system with a high share of volatile electricity generation, flexibility technologies are needed. Industrial demand-side management ranks as one of the most efficient flexibility options. This paper analyses the effect of the integration of industrial demand-side management through the flexibilisation of aluminium electrolysis and other flexibilities of the electricity system and adjacent sectors. The additional flexibility options include electricity storage, heat storage in district heating networks, controlled charging of electric vehicles, and buffer storage in hydrogen electrolysis. The utilisation of the flexibilities is modelled in different settings with an increasing share of renewable energies, applying a dispatch model. This paper compares which contributions the different flexibilities can make to emission reduction, avoidance of curtailment, and reduction of fuel and CO2 costs, and which circumstances contribute to a decrease or increase of overall emissions with additional flexibilities. The analysis stresses the rising importance of flexibilities in an energy system based on increasing shares of renewable electricity generation, and shows that flexibilities are generally suited to reduce carbon emissions. It is presented that the relative contribution towards the reduction of curtailment and costs of flexibilisation of aluminium electrolysis are high, whereby the absolute effect is small compared to the other options due to the limited number of available processes.

Description: Water and energy are two pivotal areas for future sustainable development, with complex linkages existing between the two sectors. These linkages require special attention in the context of the energy transition. Against this background, this paper analyses the role of water availability in the development of solar thermal and photovoltaic power plants for the case of the Draa Valley in southern Morocco. Located in a semi-arid to arid mountainous area, the Drâa Valley faces high water stress - a situation expected to worsen due to climate change. At the same time, the region has one of the greatest potentials for solar energy in the world. To examine whether limited water availability could accelerate or delay the implementation of solar thermal and photovoltaic power plants, this paper compares regional water availability and demand in the Draa Valley for different scenarios, paying particular attention to potential socio-economic development pathways. The Water Evaluation and Planning System software is applied to allocate the water resources in the study region. The water supply is modelled under the Representative Concentration Pathway 8.5 climate scenario, while the water demand for the Drâa Valley is modelled for a combination of three socio-economic and two energy scenarios. The climate scenario describes a significant decrease in water availability by 2050, while the socio-economic and energy scenarios show an increase in water demand. The results demonstrate that during a sequence of dry years the reservoirs water availability is reduced and shortages in water supply can result in high levels of unmet demand. If this situation occurs, oasis farming, water for drinking and energy production could compete directly with each other for water resources. The energy scenarios indicate that the use of dry cooling technologies in concentrated solar power and photovoltaic hybrid systems could be one option for reducing competition for the scarce water resources in the region. However, given that energy generation accounts for only a small share of the regional water demand, the results also suggest that socio-economic demand reduction, especially in the agricultural sector, for example by reducing the cultivated area, will most likely become necessary.

Description: Roadmaps for India's energy future foresee that coal power will continue to play a considerable role until the middle of the 21st century. Among other options, carbon capture and storage (CCS) is being considered as a potential technology for decarbonising the power sector. Consequently, it is important to quantify the relative benefits and trade-offs of coal-CCS in comparison to its competing renewable power sources from multiple sustainability perspectives. In this paper, we assess coal-CCS pathways in India up to 2050 and compare coal-CCS with conventional coal, solar PV and wind power sources through an integrated assessment approach coupled with a nexus perspective (energy-cost-climate-water nexus). Our levelized costs assessment reveals that coal-CCS is expensive and significant cost reductions would be needed for CCS to compete in the Indian power market. In addition, although carbon pricing could make coal-CCS competitive in relation to conventional coal power plants, it cannot influence the lack of competitiveness of coal-CCS with respect to renewables. From a climate perspective, CCS can significantly reduce the life cycle GHG emissions of conventional coal power plants, but renewables are better positioned than coal-CCS if the goal is ambitious climate change mitigation. Our water footprint assessment reveals that coal-CCS consumes an enormous volume of water resources in comparison to conventional coal and, in particular, to renewables. To conclude, our findings highlight that coal-CCS not only suffers from typical new technology development related challenges - such as a lack of technical potential assessments and necessary support infrastructure, and high costs - but also from severe resource constraints (especially water) in an era of global warming and the competition from outperforming renewable power sources. Our study, therefore, adds a considerable level of techno-economic and environmental nexus specificity to the current debate about coal-based large-scale CCS and the low carbon energy transition in emerging and developing economies in the Global South.

Description: Water availability plays an important role in the expansion planning of utility-scale solar power plants, especially in the arid regions of the Middle East and North Africa. Although these power plants usually account for only a small fraction of local water demand, competition for water resources between communities, farmers, companies, and power suppliers is already emerging and is likely to intensify in future. Despite this, to date there has been a lack of comprehensive studies analyzing interdependencies and potential conflicts between energy and water at local level. This study addresses this research gap and examines the linkages between water resources and energy technologies at local level based on a case study conducted in Ouarzazate, Morocco, where one of the largest solar power complexes in the world was recently completed. To better understand the challenges faced by the region in light of increased water demand and diminishing water supply, a mixed-method research design was applied to integrate the knowledge of local stakeholders through a series of workshops. In a first step, regional socio-economic water demand scenarios were developed and, in a second step, water saving measures to avoid critical development pathways were systematically evaluated using a participatory multi-criteria evaluation approach. The results are a set of water demand scenarios for the region and a preferential ranking of water saving measures that could be drawn upon to support decision-making relating to energy and water development in the region.

Description: Given that over 50% of Myanmar's urban inhabitants and nearly 75% of the rural population lack access to adequate electricity, the country's development agenda includes electrification as a key policy goal. The government's National Electrification Project (NEP) aims to reach 100% household electrification by 2030. To achieve this ambitious target, the government of Myanmar has established a set of strategic electrification priorities. The primary focus is to electrify the country through extension of the national grid and construction of large power plants based on fossil fuels and renewable energy. For decades, decentralised energy solutions have played a niche role in Myanmar's electrification journey. Local developers have constructed thousands of nominal "mini-grids", powered by a range of sources, including water, diesel, and solar. With the support of local communities, these initiatives provide positive stimuli for the social and economic development of villages across the country. To achieve its electrification goals, the NEP includes a segment to promote the development of new mini-grids through a set of subsidies and private sector cooperation initiatives. These target remote regions, which are difficult to electrify through extension of the main grid. This report takes an in-depth look at decentralised electrification through community-based mini-grids with a focus on renewable energy. The aim is to provide insights into the potential role of sustainable electrification and to identify both enabling and limiting factors related to the institutional and policy landscape (macro), as well as the local conditions (micro). It also aims to explore whether the cooperative model is a suitable organisational framework for the operation of mini-grids in Myanmar. The results of the study will help to inform policymakers and supporters of decentralised electrification about the potential role for cooperatives and provide ways to improve the operating environment for sustainable, community-based mini-grids.

Description: Agriculture is an economic sector with massive impact on biodiversity and agrobiodiversity. Sustainable diets represent a critical policy leverage and a realistic opportunity to reduce the environmental impact of the agro-food sector while improving human health at the same time. Eating out is an increasingly common habit for many consumers and, by offering sustainable dishes, catering companies can play a central role. To do this, they need to understand and correctly assess the sustainability of their food portfolio, but assessment tools are not well established yet. The NAHGAST project, of which this study was part, developed and tested a sustainability assessment tool for catering companies based on concrete targets defined per meal. This study addresses the lack of methods to evaluate the impact of food on biodiversity, with a particular focus on agrobiodiversity. The work illustrates a context-specific application of an enhanced DPSIR model to structure information and select indicators, and proposes a transdisciplinary use of existing metrics. Further research is needed in order to define scientifically sound target values or sustainability ranges for each indicator per meal, in order to calculate them. Strengths and limits of the study are discussed.

Description: The mass roll out of solar PV across the Global South has enabled electricity access for millions of people. In the right context, Small Wind Turbines (SWTs) can be complementary, offering the potential to generate at times of low solar resource (night, monsoon season, winter, etc.) and increasing the proportion of the total energy system that can be manufactured locally. However, many contextual factors critically affect the viability of the technology, such as the extreme variability in the wind resource itself and the local availability of technical support. Therefore, performing a detailed market analysis in each new context is much more important. The Wind Empowerment Market Assessment Methodology (WEMAM) is a multi-scalar, transdisciplinary methodology for identifying the niche contexts where small wind can make a valuable contribution to rural electrification. This paper aims to inform the development of WEMAM with a critical review of existing market assessment methodologies. By breaking down WEMAM into its component parts, reflecting upon its practical applications to date and drawing upon insights from the literature, opportunities where it could continue to evolve are highlighted. Key opportunities include shifting the focus towards development outcomes; creating community archetypes; localised studies in high potential regions; scenario modelling and MCDA ranking of proposed interventions; participatory market mapping; and applying socio-technical transitions theory to understand how the small wind niche can break through into the mainstream.

Description: The earth's capacity to absorb greenhouse gases is ultimately a critical limiting factor in the handling of metals. The fact that the demand for metals far exceeds their secondary production is extremely problematic at this point. Nevertheless, metals are crucial for climate protection and energy system transformation. Examples are the rare earth metal neodymium used in high-performance permanent magnets in wind turbines, the alkali metal lithium as the most important component in batteries, or the metal tellurium used in thin-film solar cells to generate solar power. It is therefore essential to promote the aspects of resource efficiency and to strengthen the critical role of metals in national and European policy programs. Next to a global solution, a European solo effort with predominantly market-based instruments and the effects of committed behaviour by civil society in the European Union (EU), show that the EU can make a considerable contribution to sustainable development on its own. Thus, a comprehensive approach is needed for sustainable metal management in the sense of a circular economy on the European level fostering sustainable production and consumption pathways. But, this need and the special role of metals are not seen in the current debate about resources in society and politics. Due to the fact that in public perception, metallic raw materials are often discussed as less urgent than energy or polymer raw materials, this article aims to highlight the critical role of metals. Further, the objective of this contribution is to show which prerequisites exist for the development and establishment of a holistic metal management and where political strategies have to start. Challenges needed to be overcome to achieve such a holistic metal strategy and management are highlighted. In particular, the role of the metal industry, circular product design and labelling and corresponding indicator systems is examined. In addition, the special role of digitalisation is being worked out. Finally, conclusions are drawn and shown which aspects have to be considered for a holistic metal strategy and management.

Description: Given large potentials of the MENA region for renewable energy production, transitions towards renewables-based energy systems seem a promising way for meeting growing energy demand while contributing to greenhouse gas emissions reductions according to the Paris Agreement at the same time. Supporting and steering transitions to a low-carbon energy system require a clear understanding of socio-technical interdependencies in the energy system as well as of the principle dynamics of system innovations. For facilitating such understanding, a phase model for renewables-based energy transitions in MENA countries, which structures the transition process over time through the differentiation of a set of sub-sequent distinct phases, is developed in this article. The phase model builds on a phase model depicting the German energy transition, which was complemented by insights about transition governance and adapted to reflect characteristics of the MENA region. The resulting model includes four phases ("Take-off renewables", "System integration", "Power to fuel/gases”, "Towards 100% renewables”), each of which is characterized by a different cluster of innovations. These innovations enter the system via three stages of development which describe different levels of maturity and market penetration, and which require appropriate governance. The phase model has the potential to support strategy development and governance of energy transitions in MENA countries in two complementary ways: it provides an overview of techno-economic developments as orienting guidelines for decision-makers, and it adds some guidance as to which governance approaches are suitable for supporting those developments.

Description: Enhancing cross-functional integration in new product development becomes increasingly important for industrial players to keep up with shorter product life cycles in technological innovation dynamics. Abundant research reflects the topic's significance, yet ambiguity in empirical results persists and industrial adoption of existing methods remains incremental. This thesis employs a qualitative approach to build a case study at the design-manufacturing interface of new product development of electrified cars. Cross-functional coopetition, as the joint occurrence of cooperation and competition, is adopted to generate an in-depth understanding of integration dynamics. Socio-organizational and contextual aspects are found to shape integration in a new product development context substantially. A model of interface dynamics is developed which provides for analysis and prediction of these aspects' impact on effective integration. A grounded theory approach to enhance integration is explored that introduces constraints as stimuli to consider manufacturability aspects in the design process. Constraint introduction is found to positively impact both cross-functional integration and creativity, with eight characteristics of constraint quality identified as moderating factors. A theoretical model is contributed which outlines cause-effect relationships of constraints' impact on antecedents of new product development success. It substantiates constraints' role in innovation contexts and encourages application for design-manufacturing integration as well as for other interfaces or purposes.

Description: Non-residential buildings in the European Union consume more than one third of the building sector's total. Many non-residential buildings are owned by municipalities. This paper reports about an energy saving competition that was carried out in 91 municipal buildings in eight EU member states in 2019. For each public building an energy team was formed. The energy teams' activities encompassed motivating changes in the energy use behaviour of employees and small investments. Two challenges added an element of gamification to the energy saving competition. To assess the success of the energy saving competition, an energy performance baseline was calculated using energy consumption data of each public building from previous years. Energy consumption in the competition year was monitored on a monthly base. After the competition the top energy savers from each country were determined by the percentage-based reduction of energy consumption compared to the baseline. On average, the buildings had an electricity and heat consumption in 2019 that was about 8 % and 7 %, respectively, lower than the baseline. As an additional data source for the evaluation, a survey among energy team members was conducted at the beginning and after the energy competition. Support from superiors, employee interest and motivation and behaviour change as assessed by energy team members show a positive, if weak or moderate, correlation with changes in electricity consumption, but not with changes in heat consumption.

Description: Nowadays, high expectations are set for a digitally enabled circular economy (CE), to enhance resource efficiency. Tracing, tracking, and storing information is most important for this. In this paper, the application of Internet of Things (IoT) and Distributed Ledger Technology (Blockchain) are hence discussed by presenting the case of professional Electrical and Electronic Equipment (EEE) in Italy. Within the context of CE, prevention of electronic waste (WEEE) is extremely relevant as it is a fast-growing waste stream, and the products contain environmentally damaging substances as well as valuable and rare materials. The use of a proper combination of IoT and blockchain can help the producers to keep control on products until EEE end-of-life, while promoting CE strategies and supporting decision-making. Based on the outcomes of five interviews conducted in 2019 to companies of the EEE sector, potential improvements in the EEE end-of-use management are discussed. After providing the definition of requirements for both the technical solution and its testing are provided, three solution variations and the related business models are created and presented, as well as considerations on their environmental and economic impacts. The study shows how digital technologies can support the appropriate and circular management of EEE products and WEEE.

Description: Electronics containing growing quantities of high value and critical metals are increasingly used in automobiles. The conventional treatment practice for end-of-life vehicles (ELV) is shredding after de-pollution and partial separation of spare parts. Despite opportunities for resource recovery, the selective separation of components containing relevant amounts of critical metals for the purpose of material recycling is not commonly implemented. This article is aimed to contribute to recycling strategies for future critical metal quantities and the role of extended material recovery from ELVs. The study examines the economic feasibility of dismantling electronic components from ELVs for high value metal recycling. The results illustrate the effects of factors as dismantling time, labour costs and logistics on the economic potential of resource recovery from ELVs. Manual dismantling is profitable for only a few components at the higher labour costs in western/northern parts of Europe and applicable material prices, including the inverter for hybrid vehicles, oxygen sensor, side assistant sensor, distance and near distance sensors. Depending on the vehicle model, labour costs and current material prices, manual dismantling can also be cost-efficient for also some other such as the heating blower, generator, starter, engine and transmission control, start/stop motor, drive control, infotainment and chassis control.

Description: Cities and urban consumers play a central role in the transition to a decarbonized society. Building on existing studies that identify the significant contributions of lifestyle changes, this study proposes a practical methodology for modeling and exploring city-specific carbon footprint reduction pathways through lifestyle changes to decarbonization. It uses an input-output approach with mixed-unit consumption data and the concept of adoption rates, which is applicable to multiple cities with widely available subnational household consumption data. This paper illustrates the use of this methodology by exploring the consumption-based mitigation pathways of 52 Japanese cities with 65 lifestyle change options covering mobility, housing, food, consumer goods, and leisure domains. The results revealed that city-specific impacts of a variety of lifestyle change options can differ by as much as a factor of five among cities, even in the urban context within the same country. Due to this city-level heterogeneity, the priority options of decarbonized lifestyles, such as among shared mobility, low-carbon diets, and longevity of consumer goods, have shifted between cities. The analysis suggests that ambitious urban lifestyle changes can potentially reduce their carbon footprints to meet the 1.5 ℃ target. However, due to the overlaps of mitigation potentials between multiple lifestyle change options, the necessary levels of adoption and coverage are extensive (i.e., adoption rates of 0.6-0.9). Importantly, adopting lifestyle changes with an efficiency strategy (e.g., the introduction of end-use technologies) or sufficiency strategy (e.g., behavioral changes in consumption amounts and modes) alone is not enough; the only way to succeed is through the combination of both strategies. This paper calls for a target-based exploration and identification of city-specific priorities of lifestyle change options to facilitate consumption-oriented mitigation policies and stakeholder actions to address the climate impacts of urban consumption.

Description: There is urgent need to change the way we make use of non-renewable resources, especially metals, to sustain their availability for vital technologies associated with achieving change towards sustainability, but also to minimize negative impacts and to achieve a fair distribution of the wealth and burdens associated with their production and use. Especially public actors (state governments and administrations) have recently formulated strategies as a means to guide action fostering these goals. Yet, these strategies are very different in their character, which makes it difficult to compare them and learn how to best design strategies for a given context to contribute to the necessary change. To approach this question, we analyzed 37 national mineral resource-related strategy documents worldwide concerning their contextual conditions, motivation, and objectives. Following the general inputs for transition strategies (current and target state, transition strategy), we identified four clusters of strategy documents that share similarities in their approaches and support the development of specific recommendations for future strategy design in terms of both content and process. Designing strategies with a clear structure that interlinks a systems-based description of the current state, a clear vision (oriented at sustainability principles) and a sufficiently differentiated but at the same time flexible transition pathway improves their potential to contribute to more sustainable metal production and use.

Description: Biomass-fueled combined heat and power systems (CHPs) can potentially offer environmental benefits compared to conventional separate production technologies. This study presents the first environmental life cycle assessment (LCA) of a novel high-efficiency bio-based power (HBP) technology, which combines biomass gasification with a 199 kW solid oxide fuel cell (SOFC) to produce heat and electricity. The aim is to identify the main sources of environmental impacts and to assess the potential environmental performance compared to benchmark technologies. The use of various biomass fuels and alternative allocation methods were scrutinized. The LCA results reveal that most of the environmental impacts of the energy supplied with the HBP technology are caused by the production of the biomass fuel. This contribution is higher for pelletized than for chipped biomass. Overall, HBP technology shows better environmental performance than heat from natural gas and electricity from the German/European grid. When comparing the HBP technology with the biomass-fueled ORC technology, the former offers significant benefits in terms of particulate matter (about 22 times lower), photochemical ozone formation (11 times lower), acidification (8 times lower) and terrestrial eutrophication (about 26 times lower). The environmental performance was not affected by the allocation parameter (exergy or economic) used. However, the tested substitution approaches showed to be inadequate to model multiple environmental impacts of CHP plants under the investigated context and goal.

Description: Biofuels and electrification are potential ways to reduce CO2 emissions from the transport sector, although not without limitations or associated problems. This paper describes a life-cycle analysis (LCA) of the Brazilian urban passenger transport system. The LCA considers various scenarios of a wholesale conversion of car and urban bus fleets to 100% electric or biofuel (bioethanol and biodiesel) use by 2050 compared to a business as usual (BAU) scenario. The LCA includes the following phases of vehicles and their life: fuel use and manufacturing (including electricity generation and land-use emissions), vehicle and battery manufacturing and end of life. The results are presented in terms of CO2, nitrous oxides (NOx) and particulate matter (PM) emissions, electricity consumption and the land required to grow the requisite biofuel feedstocks. Biofuels result in similar or higher CO2 and air pollutant emissions than BAU, while electrification resulted in significantly lower emissions of all types. Possible limitations found include the amount of electricity consumed by electric vehicles in the electrification scenarios.

Description: To what extent can designers direct their professional practices towards serving the common good? Design constitutes itself anew with every project. Each project is both conditioned and made possible through a unique constellation of actors, timeframes, objectives, skills, etc. which arise from both social values and political agendas. We discuss the different approaches of two selected design projects by the authors, and the respective strategies and methods. While the designers' ambition in both projects was certainly to change an existing situation into a preferred one - the first by the means of interactive user engagement, the second through the idea of semi-finished product semantics - we emphasize on the challenges and ambiguities arising from the evolutionary process of design, aiming at the common good. Eventually we conclude that design processes can serve as a tool to debate rather than create the common good.

Description: With regard to residential energy use in the European Union (EU), most studies consider potential adopters of the technology (e.g., private owners) as being the sole decision-makers in the technology selection. However, during an integrated decision-making process (e.g., a construction project) multiple stakeholders will interact, influencing each other's judgement, thereby making it difficult to discern who is affecting the final decision, and to what extent. The goal of this study is to outline the full network of stakeholders involved in the decision-making process, along with their degree of power and interaction in the technology choice. For this purpose, empirical evidence from a multi-country survey is examined using social network analysis (SNA). The information is compared across building typologies, project types and countries (i.e., Italy, Spain, Germany, Poland, the United Kingdom, France, Belgium and the Netherlands). The results demonstrate that, in EU residential buildings, potential adopters of the technology are not the only stakeholders involved in the technology selection. They are in all instances in communication with multiple stakeholders, some of whom also hold a high level of power in the decision (i.e., key persuaders). Furthermore, their level of power and communication varies substantially across building typologies, project types and countries.

Description: Many technical solutions have been developed to enhance the energy efficiency in buildings. However, the actual effectiveness and sustainability of these solutions often do not correspond to expectations because of the missing perspective of design, user's real needs, and unconsidered negative side effects of their use (rebounds). With the aim to help address these challenges, this paper presents results of a longitudinal living lab study and proposes a user-centered building management system (UC-BMS) as a prototype for office buildings. Based on mixed methods, UC-BMS was co-developed, tested, and evaluated in Germany in up to six office buildings, 85 offices, and within two heating periods. The results demonstrate that such user-oriented approach can save up to 20% of energy while maintaining or even improving comfort and work productivity. The findings show three main areas of intervention and elements of UC-BMS: (1) How interactive design and feedback systems (e.g., air quality) can stimulate ventilation practices and energy efficiency in offices and (2) supporting heating system optimization e.g., by better understanding office behavior. (3) Finally, an office comfort survey was conducted to enable communication between facility management and office users and thus limiting complaints and adapting the heating system towards actual office user needs.

Description: Every diet has an impact on an individual’s health status, the environment, as well as on social concerns. A growing number of meals are consumed in the out-of-home catering sector, in which a systematic sustainability assessment is not part of common practice. In order to close this gap, an instrument was developed as part of the NAHGAST project. After more than one year of using the NAHGAST online tool, it needs to be assessed what positive environmental influences can be realized by using the tool. For this reason, this article deals with the question of whether an online tool can enable stakeholders from the out-of-home consumption sector to revise their meals with regard to aspects of a sustainable diet. In addition, it will be answered how precise recipe revisions of the most popular lunchtime meals influence the material footprint as well as the carbon footprint. In conclusion, an online tool can illustrate individual sustainability paths for stakeholders in the out-of-home consumption sector and enables an independent recipe revision for already existing meals. The results show that even slight changes in recipes could lead to savings of up to a third in carbon footprint as well as in material footprint. In relation to the out-of-home consumption sector, this results in the potential for substantial multiplication effects that will pave the way for the dissemination of sustainable nutrition.

Description: Flexible, system-oriented operating strategies are becoming increasingly important in terms of achieving a climate-neutral energy system transformation. Solid-oxide electrolysis (SOEC) can play an important role in the production of green synthesis gas from renewable energy in the future. Therefore, it is important to investigate the extent to which SOEC can be used flexibly and which feedback effects and constraints must be taken into account. In this study, we derived a specific load profile from an energy turnaround scenario that supports the energy system. SOEC short-stacks were operated and we investigated the impact that the load profile has on electrical stack performance and stack degradation as well as the product gas composition by means of Fourier-transform infrared spectroscopy. The stacks could follow the grid-related requirement profiles of secondary control power and minute reserves very well with transition times of less than two minutes per 25% of relative power. Only short-term disturbances of the H2/CO ratio were observed during transitions due to the adjustment of feed gases. No elevated degradation effects resulting from flexible operation were apparent over 1300 h, although other causes of degradation were present.

Description: Electricity generation requires water. With the global demand for electricity expected to increase significantly in the coming decades, the water demand in the power sector is also expected to rise. However, due to the ongoing global energy transition, the future structure of the power supply - and hence future water demand for power generation - is subject to high levels of uncertainty, because the volume of water required for electricity generation varies significantly depending on both the generation technology and the cooling system. This study shows the implications of ambitious decarbonization strategies for the direct water demand for electricity generation. To this end, water demand scenarios for the electricity sector are developed based on selected global energy scenario studies to systematically analyze the impact up to 2040. The results show that different decarbonization strategies for the electricity sector can lead to a huge variation in water needs. Reducing greenhouse gas emissions (GHG) does not necessarily lead to a reduction in water demand. These findings emphasize the need to take into account not only GHG emission reductions, but also such aspects as water requirements of future energy systems, both at the regional and global levels, in order to achieve a sustainable energy transition.

Description: Local implementation projects for sector coupling play an important role in the transformation to a more sustainable energy system. Despite various technical possibilities, there are various barriers to the realisation of local projects. Against this backdrop, we introduce an inter- and transdisciplinary approach to identifying and evaluating different power-to-X paths as well as setting up robust local implementation projects, which account for existing drivers and potential hurdles early on. After developing the approach conceptually, we exemplify our elaborations by applying them to a use case in the German city of Wuppertal. It can be shown that a mix of several interlinked interdisciplinary methods as well as several participatory elements is suitable for triggering a collective, local innovation process. However, the timing and extent of end-user integration remain a balancing act. The paper does not focus on a detailed description of power-to-X (PtX) as a central pillar of the sustainable transformation of the energy system. Rather, it focuses on the innovative methodological approach used to select a suitable use path and design a corresponding business model. The research approach was successfully implemented in the specific case study. However, it also becomes clear that the local-specific consideration entails limitations with regard to the transferability of the research design to other spatial contexts.

Description: Sustainable consumption policies affect households differently, in particular when they are confronted with limitations on income, time or freedom of movement (e.g. driving to work). And although it is possible to assess either the average or individual material footprint (per capita or via surveys), we lack methods to describe different types of households, their lifestyles and footprints in a representative manner. We explore possibilities to do so in this article. Our interest lies in finding an applicable method that allows us to describe the footprint of households regarding their socio-demographic characteristics but also find the causes consumption behaviour. This type of monitoring would enable us to tailor policies for sustainable consumption that respect people's needs and restrictions.

Description: Recent research on the natural resource use of private consumption suggests a sustainable Material Footprint of 8 tons per capita by 2050 in industrialised countries. We analyse the Material Footprint in Germany from 2015 to 2020 in order to test whether the Material Footprint decreases accordingly. We studied the Material Footprint of 113,559 users of an online footprint calculator and predicted the Material Footprint by seasonally decomposed autoregressive (STL-ARIMA) and exponential smoothing (STL-ETS) algorithms. We find a relatively stable Material Footprint for private consumption. The overall Material Footprint decreased by 0.4% per year between 2015 and 2020 on average. The predictions do not suggest that the Material Footprint of private consumption follows the reduction path of 3.3% per year that will lead to the sustainable consumption of natural resource

Description: The German Energiewende is a deliberate transformation of an established industrial economy towards a nearly CO2-free energy system accompanied by a phase out of nuclear energy. Its governance requires knowledge on how to steer the transition from the existing status quo to the target situation (transformation knowledge). The energy system is, however, a complex socio-technical system whose dynamics are influenced by behavioural and institutional aspects, which are badly represented by the dominant techno-economic scenario studies. In this paper, we therefore investigate and identify characteristics of model studies that make agent-based modelling supportive for the generation of transformation knowledge for the Energiewende. This is done by reflecting on the experiences gained from four different applications of agent-based models. In particular, we analyse whether the studies have improved our understanding of policies' impacts on the energy system, whether the knowledge derived is useful for practitioners, how valid understanding derived by the studies is, and whether the insights can be used beyond the initial case-studies. We conclude that agent-based modelling has a high potential to generate transformation knowledge, but that the design of projects in which the models are developed and used is of major importance to reap this potential. Well-informed and goal-oriented stakeholder involvement and a strong collaboration between data collection and model development are crucial.

Description: We conduct a systematic, interdisciplinary review of empirical literature assessing evidence on induced innovation in energy and related technologies. We explore links between demand-drivers (both market-wide and targeted); indicators of innovation (principally, patents); and outcomes (cost reduction, efficiency, and multi-sector/macro consequences). We build on existing reviews in different fields and assess over 200 papers containing original data analysis. Papers linking drivers to patents, and indicators of cumulative capacity to cost reductions (experience curves), dominate the literature. The former does not directly link patents to outcomes; the latter does not directly test for the causal impact of on cost reductions). Diverse other literatures provide additional evidence concerning the links between deployment, innovation activities, and outcomes. We derive three main conclusions. (1) Demand-pull forces enhance patenting; econometric studies find positive impacts in industry, electricity and transport sectors in all but a few specific cases. This applies to all drivers - general energy prices, carbon prices, and targeted interventions that build markets. (2) Technology costs decline with cumulative investment for almost every technology studied across all time periods, when controlled for other factors. Numerous lines of evidence point to dominant causality from at-scale deployment (prior to self-sustaining diffusion) to cost reduction in this relationship. (3) Overall Innovation is cumulative, multi-faceted, and self-reinforcing in its direction (path-dependent). We conclude with brief observations on implications for modeling and policy. In interpreting these results, we suggest distinguishing the economics of active deployment, from more passive diffusion processes, and draw the following implications. There is a role for policy diversity and experimentation, with evaluation of potential gains from innovation in the broadest sense. Consequently, endogenising innovation in large-scale models is important for deriving policy-relevant conclusions. Finally, seeking to relate quantitative economic evaluation to the qualitative socio-technical transitions literatures could be a fruitful area for future research.

Description: Cross-country evidence on the adoption of energy-efficient retrofit measures (EERMs) in residential buildings is critical to supporting the development of national and pan-European policies aimed at fostering the energy performance upgrade of the building stock. In this light, the aim of this paper is to advance in the understanding of the probability of certain EERMs taking place in eight EU countries, according to a set of parameters, such as building typology, project types, and motivation behind the project. Using these parameters collected via a multi-country online survey, a set of discrete-choice (conditional logit) models are estimated on the probability of selecting a choice of any combination of 33 EERMs across the sampled countries. Results show that actions related to the building envelope are the most often-addressed across countries and single building elements or technology measures have a higher probability of being implemented. The modelling framework developed in this study contributes to the scientific community in three ways: (1) establishing an empirical relationship among EERMs and project (i.e., retrofit and deep retrofit), (2) identifying commonalities and differences across the selected countries, and (3) quantifying the probabilities and market shares of various EERMs.

Description: research

Description: This paper presents an approach for assessing lifestyle carbon footprints and lifestyle change options aimed at achieving the 1.5 °C climate goal and facilitating the transition to decarbonized lifestyles through stakeholder participatory research. Using data on Finland and Japan it shows potential impacts of reducing carbon footprints through changes in lifestyles for around 30 options covering food, housing, and mobility domains, in comparison with the 2030 and 2050 per-capita targets (2.5-3.2 tCO2e by 2030; 0.7-1.4 tCO2e by 2050). It discusses research opportunities for expanding the footprint-based quantitative analysis to incorporate subnational analysis, living lab, and scenario development aiming at advancing sustainability science on the transition to decarbonized lifestyles.

Description: The first step of complete transformation will be utilizing digital technologies and applications to improve current procedures, processes, and structures (Improve). Next, complete digitalisation will pave the way for new business models and framework conditions (Convert). Finally, comprehensive transformation of the economy and value creation will ensure the effective reorientation of society and lifestyles towards sustainability (Transform). This last step is critical for a successful ecological transformation, or a "green transformation", must be placed front and centre during international debate. Through this report, we aim to highlight and discuss the opportunities that digitalisation can bring to Germany. In particular, we will discuss three exemplary areas of ecological transformation where action is necessary: 1) A digital and circular economy that uses data to increase resource efficiency. 2) Intelligent, sustainable mobility that connects us in eco-friendly ways. 3) Transparent transitions towards sustainable food chains and agriculture. This report represents the first phase of the Shaping Digital Transformation project. In this report, we will outline the framework of our project to create a starting point for further debates.

Description: The expansion of photovoltaics in German cities has so far fallen short of expectations. The concept of "tenant electricity" ("Mieterstrom" in German), in which tenants of a building are supplied with solar power produced on site, offers great potential here. A study on behalf of the German Federal Ministry for Economic Affairs and Energy estimated the number of tenant households with good conditions for solar tenant electricity at 3.8 million. At the same time, the federal tenant electricity promotion scheme has been in place since 2017, but only about 1% of the annual budget has been claimed. The aim of this study is to identify the barriers for and drivers of diffusion of the tenant electricity model. To this end, a qualitative document analysis and a range of semi-structured expert interviews have been conducted. The theoretical framework used to guide the analysis is the multi-level perspective. The main barrier found for tenant electricity diffusion is the legal framework on the regime level, which also leads to high transaction costs of implementing tenant electricity. A social barrier is the inertia of some residents to actively concern themselves with their electricity supply and switch to a tenant electricity contract. Among its drivers are long-term trends such as the increasing electricity demand in urban areas, technical developments like blockchain technology and the increasing deployment of smart meters, and the EU Renewable Energy Directive. As long as the restrictive legal framework prevails, the further diffusion of tenant electricity will remain limited.

Description: Practices and research on measuring traditionally urban sustainability abound, therefore the challenge now is related to how the urban carbon issues are included into current measuring methods, thus there is a need to develop methods for measuring urban low-carbon sustainability. In this paper, a simple method, which is based on low-carbon sustainability index, is developed. The overall urban low-carbon sustainability index is the weighted sum of 11 single indices, and each single index is defined as the indicator assessing the development level against the baseline. The baseline is often the criteria or the minimum requirement of low-carbon sustainability. Case studies in four Chinese cities have put this method into practice, and the results show that all four selected cities fail to pass the testing of sensible low-carbon sustainability rule and they are all in weakly low-carbon sustainable development. Although the four cities have made great progress in their capacity building on pollution control and their capacities on wastewater treatment, main pollutants' removal and household and hazardous wastes treatment are enough to meet the needs of local development, they are all facing the great challenges on using of sustainable energy, offsetting of CO2 emissions and adoptions of nature-based solutions. The method developed by this research is a useful tool for decision makers identifying whether the local development is not on a low-carbon sustainable path.