ALBERT

Description / Table of Contents: Volume 2 contains a thorough, objective review on analytical techniques and directly related matters, based on published literature, reports, personal communications, isogeochem list discussions and personal experiences. This forms part 3 of the books.

Description / Table of Contents: Minerals are intrinsically resistant to the processes that homogenize silicate liquids—their compositions thus yield an archive of volcanic and magmatic processes that are invisible at the whole rock scale. New experiments, and recent advances in micro-analytical techniques open a new realm of detail regarding the mineralogical record; this volume summarizes some of this progress. The alliance of the sub-fields reviewed in this volume bear upon fundamental issues of volcanology: At what depths are eruptions triggered, and over what time scales? Where and why do magmas coalesce before ascent? If magmas stagnate for thousands of years, what forces are responsible for initiating final ascent, or the degassing processes that accelerate upward motion? To the extent that we can answer these questions, we move towards formulating tests of mechanistic models of volcanic eruptions (e.g., Wilson, 1980; Slezin, 2003; Scandone et al., 2007), and hypotheses of the tectonic controls on magma transport (e.g., ten Brink and Brocher, 1987; Takada, 1994; Putirka and Busby, 2007). Our goal, in part, is to review how minerals can be used to understand volcanic systems and the processes that shape them; we also hope that this work will spur new and integrated studies of volcanic systems. Our review begins by tracing the origins of mineral grains, and methods to estimate pressures (P) and temperatures (T) of crystallization. Hammer shows how "dynamic" experiments (conducted with varying P or T) yield important insights into crystal growth. Chapters by Putirka, Anderson, and Blundy and Cashman review various igneous geothermometers and geobarometers and introduce new calibrations. Among these chapters are many familiar models involving olivine, amphibole, feldspar, pyroxene, and spinel. Blundy and Cashman introduce new methods based on phase equilibria, and in another chapter, Hansteen and Klügel review P estimation based on densities of entrapped fluids and appropriate equations of state. Rutherford's chapter returns to the issue of disequilibrium, with a review of methods to estimate magma ascent rates, and a summary of results. Our volume then moves to a review of melt inclusions. Kent shows how pre-mixed magma compositions can be preserved as inclusions, providing a window into pre-eruptive conditions. Métrich and Wallace review the volatile contents in basaltic melt inclusions and "magma degassing paths". Such methods rely upon vapor saturation pressures, which are derived from experimentally calibrated models. Chapters by Moore and Blundy and Cashman test two of the most important models, by Newman and Lowenstern (2002) (VolatileCalc) and Papale et al. (2006). Moore provides a guide to the appropriate use of these models, and their respective errors. The next four chapters document insights obtained from isotopic studies and diffusion profiles. Ramos and Tepley review developments of micro-analytical isotope measurements, which now have the potential to elucidate even the most cryptic of open system behaviors. Cooper and Reid examine the time scales for such processes through U-series age dating techniques, and Bindeman reviews oxygen isotopes and their uses as tracers of both magmas and crystals. Costa then reviews yet another means to estimate the rates of magmatic processes, using mineral diffusion profiles, with important implications for magma processing. In the next two chapters, Streck reviews an array of imaging methods and mineral textures, and their potential for disentangling mixed magmas, and Armienti takes a new look at the analysis of crystal size distributions (CSD), with applications to Mt. Etna. Our volume concludes with a chapter by Bachmann and Bergantz summarizing compositional zonations and a review of the thermal and compositional forces that drive open system behavior. Finally, descriptions of many of the most common analytical approaches are also reviewed within these chapters. Analytical topics include: secondary ion mass spectrometry (Blundy and Cashman; Kent); electron microprobe (Blundy and Cashman; Kent; Métrich and Wallace; laser ablation ICP-MS (Kent; Ramos and Tepley); Fourier transform infrared spectroscopy (Moore; Métrich and Wallace); microsampling and isotope mass spectrometry (Ramos and Tepley); U-series measurement techniques (Cooper and Reid); Nomarski differential interference contrasts (Streck); micro-Raman spectroscopy (Métrich and Wallace); back-scattered electron microscopy, and cathodoluminescence (Blundy and Cashman). As noted, our hope is that integrated studies can bring us closer to understanding how volcanic systems evolve and why eruptions occur. Our primary goal is to review how minerals can be used to understand volcanic systems; we also hope that this review might spur new and integrated studies of volcanic systems.

Description / Table of Contents: Abstract: Helps you learn about the climate-environment system, its sensitivity, thresholds and feedback. This book presents the science on reconstructions from the Earth System, on methodological advances and on the ability of numerical models to simulate low and high frequency changes of climate, environment, and chemical cycling related to interglacials. Contents: Chapter 1. Forcing mechanisms (ed. M. Claussen) Chapter 2. Methods of palaeoclimate reconstruction and dating (ed. Frank Sirocko) Chapter 3 Climate and vegetation in Europe during MIS5 (M.F. S nchez Goni) Chapter 4. Climate and vegetation history of MIS 5-15 in Europe (Ed. Thomas Litt). Chapter 5. Modelling past interglacial climates (ed. Martin Claussen) Chapter 6. Analysis (F. Sirocko, M,.Claussen, et al.)

Description / Table of Contents: Hydrogen may be the most abundant element in the universe, but in science and in nature oxygen has an importance that is disproportionate to its abundance. Human beings tend to take it for granted because it is all around us and we breathe it, but consider the fact that oxygen is so reactive that in a planetary setting it is largely unstable in its elemental state. Were it not for the constant activity of photosynthetic plants and a minor amount of photo dissociation in the upper atmosphere, we would not have an oxygen-bearing atmosphere and we would not be here. Equally, the most important compound of oxygen is water, without which life (in the sense that we know it) could not exist. The role of water in virtually all geologic processes is profound, from formation of ore deposits to igneous petrogenesis to metamorphism to erosion and sedimentation. In planetary science, oxygen has a dual importance. First and foremost is its critical role in so many fundamental Solar System processes. The very nature of the terrestrial planets in our own Solar System would be much different had the oxygen to carbon ratio in the early solar nebula been somewhat lower than it was, because elements such as calcium and iron and titanium would have been locked up during condensation as carbides, sulfides and nitrides and even (in the case of silicon) partly as metals rather than silicates and oxides. Equally, the role of water ice in the evolution of our Solar System is important in the early accretion and growth of the giant planets and especially Jupiter, which exerted a major control over how most of the other planets formed. On a smaller scale, oxygen plays a critical role in the diverse kinds of physical evolution of large rocky planets, because the internal oxidation state strongly influences the formation and evolution of the core, mantle and crust of differentiated planets such as the Earth. Consider that basaltic volcanism may be a nearly universal phenomenon among the evolved terrestrial planets, yet there are basalts and basalts. The basalts of Earth (mostly), Earth's Moon, Vesta (as represented by the HED meteorites) and Mars are all broadly tholeiitic and yet very different from one another, and one of the primary differences is in their relative oxidation states (for that matter, consider the differences between tholeiitic and calc-alkaline magma series on Earth). But there is another way that oxygen has proven to be hugely important in planetary science, and that is as a critical scientific clue to processes and conditions and even sources of materials. Understanding the formation and evolution of our Solar System involves reconstructing processes and events that occurred more than 4.5 Ga ago, and for which the only contemporary examples are occurring hundreds of light years away. It is a detective story in which most of the clues come from the laboratory analysis of the products of those ancient processes and events, especially those that have been preserved nearly unchanged since their formation at the Solar System's birth: meteorites; comets; and interplanetary dust particles. For example, the oxidation state of diverse early Solar System materials ranges from highly oxidized (ferric iron) to so reducing that some silicon exists in the metallic state and refractory lithophile elements such as calcium exist occur in sulfides rather than in silicates or carbonates. These variations reflect highly different environments that existed in different places and at different times. Even more crucial has been the use of oxygen 3-isotope variations, which began almost accidentally in 1973 with an attempt to do oxygen isotope thermometry on high-temperature solar nebula grains (Ca-, Al-rich inclusions) but ended with the remarkable discovery of non-mass-dependent oxygen isotope variations in high-temperature materials from the earliest Solar System. The presolar nebula was found to be very heterogeneous in its isotopic composition, and virtually every different planet and asteroid for which we have samples has a unique oxygen-isotopic fingerprint. The idea for this book originated with Jim Papike, who suggested the idea of a study initiative (and, ultimately, a published volume) focused on the element that is so critically important in so many ways to planetary science. He recognized that oxygen is such a constant theme through all aspects of planetary science that the proposed initiative would serve to bring together scientists from a wide range of disciplines for the kind of cross-cutting dialogue that occurs all too rarely these days. In this sense the Oxygen Initiative is modeled on the Basaltic Volcanism Study Project, which culminated in what remains to this day a hugely important reference volume (Basaltic Volcanism Study Project 1981). After obtaining community input and feedback, primarily through the Curation and Analysis Planning Team for Extraterrestrial Materials (CAPTEM) and the Management Operations Working Group for NASA's Cosmochemistry Program, a team of scientists was assembled who would serve as chapter writing leads, and the initiative was formally proposed to and accepted by the Lunar and Planetary Institute (LPI; Dr. Stephen Mackwell, Director) for sponsorship. A formal proposal was then submitted to and approved by the Mineralogical Society of America to publish the resulting volume in the Reviews in Mineralogy and Geochemistry (RiMG) series. Three open workshops were held as preludes to the book: Oxygen in the Terrestrial Planets, held in Santa Fe, NM July 20-23, 2004; Oxygen in Asteroids and Meteorites, held in Flagstaff, AZ June 2-3, 2005; and Oxygen in Earliest Solar System Materials and Processes (and including the outer planets and comets), held in Gatlinburg, TN September 19-22, 2005. The workshops were each organized around a small number of sessions (typically 4-6), each focusing on a particular topic and consisting of invited talks, shorter contributed talks, and ample time for discussion after each talk. In all of the meetings, the extended discussion periods were lively and animated, often bubbling over into the breaks and later social events. As a consequence of the cross-cutting approach, the final book spans a wide range of fields relating to oxygen, from the stellar nucleosynthesis of oxygen, to its occurrence in the interstellar medium, to the oxidation and isotopic record preserved in 4.56 Ga grains formed at the Solar System's birth, to its abundance and speciation in planets large and small, to its role in the petrologic and physical evolution of the terrestrial planets.

Description / Table of Contents: Volume 1 contains subjective reviews, specialized and novel technique descriptions by guest authors. Part 1 - includes contributions on purely analytical techniques. Part 2 - includes topics such as development of mass spectrometers, stability of ion sources, standards and calibration, correction procedures and experimental methods to obtain isotopic fractionation factors.

Description / Table of Contents: Contents:1. General Introduction: Clays, Clay Minerals, and Clay Science 2. Structure and Mineralogy of Clay Minerals 3. Surface and Interface Chemistry of Clay Minerals 4. Synthetic Clay Minerals and Purification of Natural Clays 5. Colloid Clay Science 6. Mechanical Properties of Clays and Clay Minerals 7. Modified Clays and Clay Minerals 8. Properties and Behavior of Iron in Clay Minerals 9. Clays, Microorganisms and Biomineralisation 10. Clays in Industry 11. Clays, Environment and Health 12. Critical Assessment of Some Analytical Techniques 13. Some Other Materials Related to Clays 14. Genesis of Clay Minerals 15. History of Clay Science: A Young Discipline 16. Teaching Clay Science: A Great Perspective

Description / Table of Contents: Fluids rich in water, carbon and sulfur species and a variety of dissolved salts are a ubiquitous transport medium for heat and matter in the Earth’s interior. Fluid transport through the upper mantle and crust controls the origin of magmatism above subduction zones and results in natural risks of explosive volcanism. Fluids passing through rocks affect the chemical and heat budget of the global oceans, and can be utilized as a source of geothermal energy on land. Fluid transport is a key to the formation and the practical utilization of natural resources, from the origin of hydrothermal mineral deposits, through the exploitation of gaseous and liquid hydrocarbons as sources of energy and essential raw materials, to the subsurface storage of waste materials such as CO2. Different sources of fluids and variable paths of recycling volatile components from the hydrosphere and atmosphere through the solid interior of the Earth lead to a broad range of fluid compositions, from aqueous liquids and gases through water-rich silicate or salt melts to carbon-rich endmember compositions. Different rock regimes in the crust and mantle generate characteristic ranges of fluid composition, which depending on pressure, temperature and composition are miscible to greatly variable degrees. For example, aqueous liquids and vapors are increasingly miscible at elevated pressure and temperature. The degree of this miscibility is, however, greatly influenced by the presence of additional carbonic or salt components. A wide range of fluid–fluid interactions results from this partial miscibility of crustal fluids. Vastly different chemical and physical properties of variably miscible fluids, combined with fluid flow from one pressure – temperature regime to another, therefore have major consequences for the chemical and physical evolution of the crust and mantle. Several recent textbooks and review articles have addressed the role and diverse aspects of fluids in crustal processes. However, immiscibility of fluids and the associated phenomena of m ultiphase fluid flow are generally dealt with only in subsections with respect to specific environments and aspects of fluid mediated processes. This volume of Reviews in Mineralogy and Geochemistry attempts to fill this gap and to explicitly focus on the role that co-existing fluids play in the diverse geologic environments. It brings together the previously somewhat detached literature on fluid–fluid interactions in continental, volcanic, submarine and subduction zone environments. It emphasizes that fluid mixing and unmixing are widespread processes that may occur in all geologic environments of the entire crust and upper mantle. Despite different P-T conditions, the fundamental processes are analogous in the different settings.

Description / Table of Contents: The idea for this book was conceived in early June, 2005 at a paleoaltimetry workshop held at Lehigh University, Lehigh, Pennsyalvania and organized by Dork Sahagian. The workshop was funded by the tectonics program at NSF, and was designed to bring together researchers in paleoaltimetry to discuss different techniques and focus the community on ways of improving paleoelevation estimates and consequent interpretations of geodynamics and tectonics. At this meeting, some commented that a comprehensive volume describing the different methods could help advance the field. I offered to contact the Mineralogical Society of America and the Geochemical Society about publishing a RiMG volume on paleoaltimetry. Because many of the techniques used to infer paleoelevations are geochemically-based or deal with thermodynamic principles, the GS and MSA agreed to the project. Two years and roughly 1000 e-mails later, our book has arrived. The book is organized into 4 sections: Geodynamic and geomorphologic rationale (Clark). This chapter provides the broad rationale behind paleoaltimetry, i.e., why we study it. Stable isotope proxies. These 4 chapters cover theory of stable isotopes in precipitation and their response to altitudinal gradients (Rowley), and stable isotopes sytematics in paleosols (Quade, Garzione and Eiler), silicates (Mulch and Chamberlain) and fossils (Kohn and Dettman). Proxies of atmospheric properties. These 4 chapters cover temperature lapse rates (Meyer), entropy (Forest), and atmospheric pressure proxies, including total atmospheric pressure from gas bubbles in basalt (Sahagian and Proussevitch), and the partial pressure of CO2 (Kouwenberg, Kürshner, and McElwain). Note that clumped isotope thermometry (Quade, Garzione and Eiler) also provides direct estimates of temperature. Radiogenic and cosmogenic nuclides. These 2 chapters cover low-temperature thermochronologic approaches (Reiners) and cosmogenic isotopes (Riihimaki and Libarkin). Some chapters overlap in general content (e.g., basic principles of stable isotopes in precipitation are covered to different degrees in all stable isotope chapters), but no attempt was made to limit authors' discussion of principles, or somehow attempt to arrive at a "consensus view" on any specific topic. Because science advances by critical discussion of concepts, such restrictions were viewed as counterproductive. This does mean that different chapters may present different views on reliability of paleoelevation estimates, and readers are advised to read other chapters in the book on related topics – they may be more closely linked than they might at first appear! I hope readers of this book will discover and appreciate the synergy among paleoaltimetry, climate change, and tectonic geomorphology. These interrelationships create a complex, yet rich field of scientific enquiry that in turn offers insights into climate and geodynamics.

Description / Table of Contents: Contents: The Nature of Remote Sensing. - Optical Radiation Models. - Sensor Models. - Data Models. - Spectral Transforms. - Spatial Transforms. - Correction and Calibration. - Image Registration and Fusion. - Thematic Classification

Description / Table of Contents: 1: Fundamentals. 2. Governing equations for motion and deformation of block systems and heat transfer. 3. Constitutive models of rock fractures and rock masses - the basics. 4. Fluid flow and coupled hydro-mechanical behaviour of rock fractures. Part 2: Fracture System Characterization and Block Model Construction. 5. Basics of characterization of fracture systems - field mapping and stochastic simulations. 6. Basics of combinatorial topology for block system representation. 7. Numerical techniques for block system construction. Part 3: DEM approaches. 8. Explicit discrete element method for block systems the distinct element method. 9. Implicit Discrete Element Method for block systems - discontinuous deformation analysis (DDA). 10. Discrete Fracture Network (DFN) method. 11. Discrete Element Methods for granular materials. Part 4: Application Studies. 12. Case studies of Discrete Element Methods in geology, geophysics and rock engineering.

Description / Table of Contents: Contents: Climate and Culture Change: Exploring Holocene Transitions Mid-Holocene climate and culture change in coastal Peru. Mid-Holocene climate and culture change in the South Central Andes. Mid-Holocene Climate and cultural dynamics in Brazil and the Guianas. Culture and Climate in Mesoamerica during the middle holocene. Middle holocene environments of North and East Africa, with special emphasis on the African Sahara. Influence of holocene marine transgression and climate change on cultural evolution in Southern Mesopotamia. Mid-Holocene cultural dynamics and climate change in the Western Pacific. Mid Holocene climate and cultural dynamics in Easter Central Asia. Mid-Holocene Climate change and cultural dynamics in the basin of the Sea of Japan and Adjacent Areas Mid-Holocene Climatic and Cultural dynamics in Northern Europe. Mid-Holocene Cultural adaptations to central Maine. Mid-Holocen Cultural dynamics in Southeastern North America Mid-Holocene culture and climate on the Northwest coast of North America. Middle holocene climate change and population dispersal in Western North America.

Description / Table of Contents: Over 25 years ago, Volume 9 of Reviews in Mineralogy: Amphiboles and Other Hydrous Pyriboles seemed to contain all that was possible to know about this group of fascinating minerals. The subsequent twenty-five years have shown that this assessment was wrong: Nature was keeping a lot in reserve, and has since revealed considerable new complexity in the constitution and behavior of amphiboles. Some of the advances in knowledge have been due to the use of new experimental techniques, some have been due to the investigation of hitherto neglected rock-types, and some have been due to the development of new ideas. The identification and systematic investigation of variable LLE (Light Lithophile Elements), particularly Li and H, led to the identification of several new amphibole species and the recognition that variable Li and H play an important role in chemical variations in amphiboles from both igneous and metamorphic parageneses. In turn, this work drove the development of microbeam SIMS to analyze LLE in amphiboles. Detailed mineralogical work on metasyenites showed hitherto unexpected solid-solution between Na and Li at the M(4) site in monoclinic amphiboles, a discovery that has upset the current scheme of amphibole classification and nomenclature and initiated new efforts in this direction. Systematic and well-planned synthesis of amphiboles, combined with careful spectroscopy, has greatly furthered our understanding of cation and anion order in amphiboles. The use of bond-valence theory to predict patterns of SRO (Short-Range Order) in amphiboles, and use of these predictions to understand the infrared spectra of well-characterized synthetic-amphibole solid-solutions, has shown that SRO is a major feature of the amphibole structure, and has resulted in major advances in our understanding of SRO in minerals. There has been significant progress relating changes in amphibole composition and cation ordering to petrogenetic conditions and trace-element behavior. Work on the nature of fibrous amphiboles and their toxicity and persistence in living organisms has emphasized the importance of accurate mineralogical characterization in environmental and health-related problems. The current volume has taken a different approach from previous volumes concerned with major groups of rock-forming minerals. Some of the contents have previously been organized by the investigative technique or groups of similar techniques: crystal-structure refinement, spectroscopy, TEM etc. Here, we have taken an approach that focuses on aspects of amphiboles rather than experimental techniques: crystal chemistry, new compositions, long-range order, short-range order etc., and all experimental results germane to these topics are discussed in each chapter. The intent of this approach is to focus on amphiboles, and to emphasize that many techniques are necessary to fully understand each aspect of the amphiboles and their behavior in both natural and industrial processes.

Description / Table of Contents: Contents: 1. Why we should care: the impact of anthropogenic carbon dioxide on the carbon cycle.2. The thermodynamic background.3. Carbon dioxide and CO2-H2O mixtures.4. The aqueous electrolytic solution.5. The product solid phases.6. The kinetics of mineral carbonation.7. Reaction path modeling of geological CO2 sequestration.

Description / Table of Contents: Contents: 1. Basic principles and applications of reservoir characterization 2 Tools and techiques for characterizing oil and gas reservoirs 3. Basic sedimentary rock properties 4. Geologic time and stratigraphy 5. Geologic controls on reservoir quality 6. Fluvial deposits and reservoirs 7. Eolian (Windblown) deposits and reservoirs 8. Nondeltaic, shallow marine deposits and reservoirs 9. Deltaic deposits and reservoirs 10. Deepwater deposits and reservoirs 11. Sequence stratigraphy for reservoir characterization 12. An example of integrated characterization for Reservoir Development and exploration: Northeast Betara field, Jabung subbasin, South Sumatra, Indonesia R

Description / Table of Contents: The importance of sulfide minerals in ores has long been, and continues to be, a major reason for the interest of mineralogists and geochemists in these materials. Determining the fundamental chemistry of sulfides is key to understanding their conditions of formation and, hence, the geological processes by which certain ore deposits have formed. This, in turn, may inform the strategies used in exploration for such deposits and their subsequent exploitation. In this context, knowledge of structures, stabilities, phase relations and transformations, together with the relevant thermodynamic and kinetic data, is critical. As with many geochemical systems, much can also be learned from isotopic studies. The practical contributions of mineralogists and geochemists to sulfide studies extend beyond areas related to geological applications. The mining of sulfide ores, to satisfy ever increasing world demand for metals, now involves extracting very large volumes of rock that contains a few percent at most (and commonly less than one percent) of the metal being mined. This is true of relatively low value metals such as copper; for the precious metals commonly occurring as sulfides, or associated with them, the mineable concentrations (grades) are very much lower. The "as-mined" ores therefore require extensive processing in order to produce a concentrate with a much higher percentage content of the metal being extracted. Such mineral processing (beneficiation) involves crushing and grinding of the ores to a very fine grain size in order to liberate the valuable metal-bearing (sulfide) minerals which can then be concentrated. In some cases, the metalliferous (sulfide) minerals may have specific electrical or magnetic properties that can be exploited to enable separation and, hence, concentration. More commonly, froth flotation is used, whereby the surfaces of particles of a particular mineral phase are rendered water repellent by the addition of chemical reagents and hence are attracted to air bubbles pulsed through a mineral particle-water-reagent pulp. An understanding of the surface chemistry and surface reactivity of sulfide minerals is central to this major industrial process and, of course, knowledge of electrical and magnetic properties is very important in cases where those particular properties can be utilized. In the years since the publication of the first ever Reviews in Mineralogy volume (1974, at that time called MSA "Short Course Notes") which was entitled Sulfide Mineralogy, sulfides have become a focus of research interest for reasons centering on at least two other areas in addition to their key role in ore deposit studies and mineral processing technology. It is in these two new areas that much of the research on sulfides has been concentrated in recent years. The first of these areas relates to the capacity of sulfides to react with natural waters and acidify them; the resulting Acid Rock Drainage (ARD), or Acid Mine Drainage (AMD) where the sulfides are the waste products of mining, has the capacity to damage or destroy vegetation, fish and other aquatic life forms. These acid waters may also accelerate the dissolution of associated minerals containing potentially toxic elements (e.g., As, Pb, Cd, Hg, etc.) and these may, in turn, cause environmental damage. The much greater public awareness of the need to prevent or control AMD and toxic metal pollution has led to regulation and legislation in many parts of the world, and to the funding of research programs aimed at a greater understanding of the factors controlling the breakdown of sulfide minerals. We begin with a review of analytical methods for measuring and calibrating water contents in nominally anhydrous minerals by George Rossman. While infrared spectroscopy is still the most sensitive and most convenient method for detecting water in minerals, it is not intrinsically quantitative but requires calibration by some other, independent analytical method, such as nuclear reaction analysis, hydrogen manometry, or SIMS. A particular advantage of infrared spectroscopy, however, is the fact that it does not only probe the concentration, but also the structure of hydrous species in a mineral and in many cases the precise location of a proton in a mineral structure can be worked out based on infrared spectra alone. The methods and principles behind this are reviewed by Eugen Libowitzky and Anton Beran, with many illustrative examples. Compared to infrared spectroscopy, NMR is much less used in studying hydrogen in minerals, mostly due to its lower sensitivity, the requirement of samples free of paramagnetic ions such as Fe2+ and because of the more complicated instrumentation required for NMR measurements. However, NMR could be very useful under some circumstances. It could detect any hydrogen species in a sample, including such species as H2 that would be invisible with infrared. Potential applications of NMR to the study of hydrogen in minerals are reviewed by Simon Kohn. While structural models of "water" in minerals have already been deduced from infrared spectra several decades ago, in recent years atomistic modeling has become a powerful tool for predicting potential sites for hydrogen in minerals. The review by Kate Wright gives an overview over both quantum mechanical methods and classical methods based on interatomic potentials. Joseph Smyth then summarizes the crystal chemistry of hydrogen in high-pressure silicate and oxide minerals. As a general rule, the incorporation of hydrogen is not controlled by the size of potential sites in the crystal lattice; rather, the protons will preferentially attach to oxygen atoms that are electrostatically underbonded, such as the non-silicate oxygen atoms in some high-pressure phases. Moreover, heterovalent substitutions, e.g., the substitution of Al3+ for Si4+, can have a major effect on the incorporation of hydrogen. The second reason for even greater research interest in sulfide minerals arose initially from the discoveries of active hydrothermal systems in the deep oceans. The presence of life forms that have chemical rather than photosynthetic metabolisms, and that occur in association with newly-forming sulfides, has encouraged research on the potential of sulfide surfaces in catalyzing the reactions leading to assembling of the complex molecules needed for life on Earth. These developments have been associated with a great upsurge of interest in the interactions between microbes and minerals, and in the role that minerals can play in biological systems. In the rapidly growing field of geomicrobiology, metal sulfides are of major interest. This interest is related to a variety of processes including, for example, those where bacteria interact with sulfides as part of their metabolic activity and cause chemical changes such as oxidation or reduction, or those in which biogenic sulfide minerals perform a specific function, such as that of navigation in magnetotactic bacteria. The development of research in areas such as geomicrobiology and environmental mineralogy and geochemistry, is also leading to a greater appreciation of the role of sulfides (particularly the iron sulfides) in the geochemical cycling of the elements at or near the surface of the Earth. For example, the iron sulfides precipitated in the reducing environments beneath the surface of modern sediments in many estuarine areas may play a key role in the trapping of toxic metals and other pollutants. In our understanding of "Earth Systems," geochemical processes involving metal sulfides are an important part of the story. The main objective of the present text is to provide an up-to-date review of sulfide mineralogy and geochemistry. The emphasis is, therefore, on such topics as crystal structure and classification, electrical and magnetic properties, spectroscopic studies, chemical bonding, high and low temperature phase relations, thermochemistry, and stable isotope systematics. In the context of this book, emphasis is on metal sulfides sensu stricto where only the compounds of sulfur with one or more metals are considered. Where it is appropriate for comparison, there is brief discussion of the selenide or telluride analogs of the metal sulfides. When discussing crystal structures and structural relationships, the sulfosalt minerals as well as the sulfides are considered in some detail (see Chapter 2; also for definition of the term "sulfosalt"). However, in other chapters there is only limited discussion of sulfosalts, in part because there is little information available beyond knowledge of chemical composition and crystal structure. Given the dramatic developments in areas of research that were virtually non-existent at the time of the earlier reviews, major sections have been added here on sulfide mineral surface chemistry and reactivity, formation and transformation of metal-sulfur clusters and nanoparticles, modeling of hydrothermal precipitation, and on sulfides in biosystems. However, it should be emphasized that the growth in the literature on certain aspects of sulfide mineralogy over the past 20 years or so has been such that comprehensive coverage is not possible in a single volume. Thus, the general area of "sulfides in biosystems" is probably worthy of a volume in itself, and "environmental sulfide geochemistry" (including topics such as oxidative breakdown of sulfides) is another area where far more could have been written. In selecting areas for detailed coverage in this volume, we have been mindful of the existence of other relatively recent review volumes, including those in the RiMG series. It has also been our intention not to cover any aspects of the natural occurrence, textural or paragenetic relationships involving sulfides. This is published information that, although it may be supplemented by new observations, is likely to remain useful for a long period and largely not be superceded by later work. In the following chapters, the crystal structures, electrical and magnetic properties, spectroscopic studies, chemical bonding, thermochemistry, phase relations, solution chemistry, surface structure and chemistry, hydrothermal precipitation processes, sulfur isotope geochemistry and geobiology of metal sulfides are reviewed. Makovicky (Chapter 2) discusses the crystal structures and structural classification of sulfides and other chalcogenides (including the sulfosalts) in terms of the relationships between structural units. This very comprehensive survey, using a rather different and complementary approach to that used in previous review volumes, shows the great diversity of sulfide structures and the wealth of materials that remain to be characterized in detail. These materials include rare minerals, and synthetic sulfides that may represent as yet undescribed minerals. Pearce, Pattrick and Vaughan (Chapter 3) review the electrical and magnetic properties of sulfides, discussing the importance of this aspect of the sulfides to any understanding of their electronic structures (chemical bonding) and to applications ranging from geophysical prospecting and mineral extraction to geomagnetic and palaeomagnetic studies. Rapidly developing new areas of interest discussed include studies of the distinctive properties of sulfide nanoparticles. Wincott and Vaughan (Chapter 4) then outline the spectroscopic methods employed to study the crystal chemistry and electronic structures of sulfides. These range from UV-visible through infrared and Raman spectroscopies, to X-ray emission, photoemission and absorption, and to nuclear spectroscopies. Chemical bonding (electronic structure) in sulfides is the subject of the following chapter by Vaughan and Rosso (Chapter 5), a topic which draws on knowledge of electrical and magnetic properties and spectroscopic data as experimental input, as well as on a range of rapidly developing computational methods. Attention then turns to the thermochemistry of sulfides in a chapter by Sack and Ebel (Chapter 6) which is followed by discussion of phase equilibria at high temperatures in the review by Fleet (Chapter 7). Sulfides in aqueous systems, with emphasis on solution complexes and clusters, forms the subject matter of the chapter written by Rickard and Luther (Chapter 8). Sulfide mineral surfaces are the focus of the next two chapters, both by Rosso and Vaughan. The first of these chapters (Chapter 9) addresses characterization of the pristine sulfide surface, its structure and chemistry; the second (Chapter 10) concerns surface reactivity, including redox reactions, sorption phenomena, and the catalytic activity of sulfide surfaces. Reed and Palandri (Chapter 11) show in the next chapter how much can now be achieved in attempting to predict processes of sulfide precipitation in hydrothermal systems. The final chapters deal with two distinctive areas of sulfide mineralogy and geochemistry. Seal (Chapter 12) presents a comprehensive account of the theory and applications of sulfur isotope geochemistry; sulfur isotope fractionation can provide the key to understanding the natural processes of formation of sulfide deposits. In the final chapter, Posfai and Dunin-Borkowski (Chapter 13) review the rapidly developing area of sulfides in biosystems, discussing aspects of both sulfide mineral-microbe interactions and biomineralization processes involving sulfides.

Description / Table of Contents: Contents: Chapter 1: Introduction Chapter 2: Data Warehouse and OLAP Technology for Dat Mining Chapter 3: Data Preprocessing Chapter 4: Data Mining Primitives, Languages, and System Architectures Chapter 5: Concept Description: Characterization and Comparison Chapter 6: Mining Association Rules in Large Databases Chapter 7: Classification and Prediction Chapter 8: Cluster Analysis Chapter 9: Mining Time-Series, Sequence, and Stream Data Chapter 10: Mining Spatial, Multimedia, and Biological Databases Chapter 11: Text Mining and Web Mining Chapter 12: Visual and Audio Data Mining Chapter 13: Data Mining Applications and Trends in Data Mining

Description / Table of Contents: Medical Mineralogy and Geochemistry is an emergent, highly interdisciplinary field of study. The disciplines of mineralogy and geochemistry are integral components of cross-disciplinary investigations that aim to understand the interactions between geomaterials and humans as well as the normal and pathological formation of inorganic solid precipitates in vivo. Research strategies and methods include but are not limited to: stability and solubility studies of earth materials and biomaterials in biofluids or their proxies (i.e., equilibrium thermodynamic studies), kinetic studies of pertinent reactions under conditions relevant to the human body, molecular modeling studies, and geospatial and statistical studies aimed at evaluating environmental factors as causes for activating certain chronic diseases in genetically predisposed individuals or populations. Despite its importance, the area of Medical Mineralogy and Geochemistry has received limited attention by scientists, administrators, and the public. The objectives of this volume are to highlight some of the existing research opportunities and challenges, and to invigorate exchange of ideas between mineralogists and geochemists working on medical problems and medical scientists working on problems involving geomaterials and biominerals. Examples presented in this volume (Table of contents below) include the effects of inhaled dust particles in the lung (Huang et al. 2006; Schoonen et al. 2006), biomineralization of bones and teeth (Glimcher et al. 2006), the formation of kidney-stones, the calcification of arteries, the speciation exposure pathways and pathological effects of heavy metal contaminants (Reeder et al. 2006; Plumlee et al. 2006), the transport and fate of prions and pathological viruses in the environment (Schramm et al. 2006), the possible environmental-genetic link in the occurrence of neurodegenerative diseases (Perl and Moalem 2006), the design of biocompatible, bioactive ceramics for use as orthopaedic and dental implants and related tissue engineering applications (Cerruti and Sahai 2006) and the use of oxide-encapsulated living cells for the development of biosensors (Livage and Coradin 2006).

Description / Table of Contents: Multidimensional data is data that exists and changes in more than one dimension, by time, or spatially, or both, sometimes dynamically. Thinkhere of tracking hurricane data in order to project the storm's path,for just one example. As spatial and other multidimensional datastructures become increasingly important for the applications in gameprogramming, data mining, bioinformatics, and many other areas--including astronomy, geographic information systems, physics,etc., the need for a comprehensive book on the subject is paramount.

Description / Table of Contents: Earth is a water planet. Oceans of liquid water dominate the surface processes of the planet. On the surface, water controls weathering as well as transport and deposition of sediments. Liquid water is necessary for life. In the interior, water fluxes melting and controls the solid-state viscosity of the convecting mantle and so controls volcanism and tectonics. Oceans cover more than 70% of the surface but make up only about 0.025% of the planet's mass. Hydrogen is the most abundant element in the cosmos, but in the bulk Earth, it is one of the most poorly constrained chemical compositional variables. Almost all of the nominally anhydrous minerals that compose the Earth's crust and mantle can incorporate measurable amounts of hydrogen. Because these are minerals that contain oxygen as the principal anion, the major incorporation mechanism is as hydroxyl, OH-, and the chemical component is equivalent to water, H2O. Although the hydrogen proton can be considered a monovalent cation, it does not occupy same structural position as a typical cation in a mineral structure, but rather forms a hydrogen bond with the oxygens on the edge of the coordination polyhedron. The amount incorporated is thus quite sensitive to pressure and the amount of H that can be incorporated in these phases generally increases with pressure and sometimes with temperature. Hydrogen solubility in nominally anhydrous minerals is thus much more sensitive to temperature and pressure than that of other elements. Because the mass of rock in the mantle is so large relative to ocean mass, the amount that is incorporated the nominally anhydrous phases of the interior may constitute the largest reservoir of water in the planet. Understanding the behavior and chemistry of hydrogen in minerals at the atomic scale is thus central to understanding the geology of the planet. There have been significant recent advances in the detection, measurement, and location of H in the nominally anhydrous silicate and oxide minerals that compose the planet. There have also been advances in experimental methods for measurement of H diffusion and the effects of H on the phase boundaries and physical properties whereby the presence of H in the interior may be inferred from seismic or other geophysical studies. It is the objective of this volume to consolidate these advances with reviews of recent research in the geochemistry and mineral physics of hydrogen in the principal mineral phases of the Earth's crust and mantle. The Chapters We begin with a review of analytical methods for measuring and calibrating water contents in nominally anhydrous minerals by George Rossman. While infrared spectroscopy is still the most sensitive and most convenient method for detecting water in minerals, it is not intrinsically quantitative but requires calibration by some other, independent analytical method, such as nuclear reaction analysis, hydrogen manometry, or SIMS. A particular advantage of infrared spectroscopy, however, is the fact that it does not only probe the concentration, but also the structure of hydrous species in a mineral and in many cases the precise location of a proton in a mineral structure can be worked out based on infrared spectra alone. The methods and principles behind this are reviewed by Eugen Libowitzky and Anton Beran, with many illustrative examples. Compared to infrared spectroscopy, NMR is much less used in studying hydrogen in minerals, mostly due to its lower sensitivity, the requirement of samples free of paramagnetic ions such as Fe2+ and because of the more complicated instrumentation required for NMR measurements. However, NMR could be very useful under some circumstances. It could detect any hydrogen species in a sample, including such species as H2 that would be invisible with infrared. Potential applications of NMR to the study of hydrogen in minerals are reviewed by Simon Kohn. While structural models of "water" in minerals have already been deduced from infrared spectra several decades ago, in recent years atomistic modeling has become a powerful tool for predicting potential sites for hydrogen in minerals. The review by Kate Wright gives an overview over both quantum mechanical methods and classical methods based on interatomic potentials. Joseph Smyth then summarizes the crystal chemistry of hydrogen in high-pressure silicate and oxide minerals. As a general rule, the incorporation of hydrogen is not controlled by the size of potential sites in the crystal lattice; rather, the protons will preferentially attach to oxygen atoms that are electrostatically underbonded, such as the non-silicate oxygen atoms in some high-pressure phases. Moreover, heterovalent substitutions, e.g., the substitution of Al3+ for Si4+, can have a major effect on the incorporation of hydrogen. Data on water in natural minerals from crust and mantle are compiled and discussed in three reviews by Elisabeth Johnson, Henrik Skogby and by Anton Beran and Eugen Libowitzky. Among the major mantle minerals, clinopyroxenes usually retain the highest water contents, followed by orthopyroxenes and olivine, while the water contents in garnets are generally low. Most of these water contents need to be considered as minimum values, as many of the mantle xenoliths may have lost water during ascent. However, there are some cases where the correlation between the water contents and other geochemical parameters suggest that the measured water concentrations reflect the true original water content in the mantle. The basic thermodynamics as well as experimental data on water solubility and partitioning are reviewed by Hans Keppler and Nathalie Bolfan Casanova. Water solubility in minerals depends in a complicated way on pressure, temperature, water fugacity and bulk composition. For example, water solubility in the same mineral can increase or decrease with temperature, depending on the pressure of the experiments. Nevertheless, the pressure and temperature dependence of water solubility can be described by a rather simple thermodynamic formalism and for most minerals of the upper mantle, the relevant thermodynamic parameters are known. The highest water solubilities are reached in the minerals wadsleyite and ringwoodite stable in the transition zone, while the minerals of the lower mantle are probably mostly dry. The rather limited experimental data on water partitioning between silicate melts and minerals are reviewed by Simon Kohn and Kevin Grant. One important observation here is that comparing the compatibility of hydrogen with that of some rare earth element is misleading, as such correlations are always limited to a small range of pressure and temperature for a given mineral. The stabilities of hydrous phases in the peridotite mantle and in subducted slabs are reviewed by Daniel Frost and by Tatsuhiko Kawamoto. While most of the water in the mantle is certainly stored in the nominally anhydrous minerals, hydrous phases can be important storage sites of water in certain environments. Amphibole and phlogopite require a significant metasomatic enrichment of Na and K in order to be stabilized in the upper mantle, but serpentine may be an important carrier of water in cold subducted slabs. The diffusion of hydrogen in minerals is reviewed by Jannick Ingrin and Marc Blanchard. An important general observation here is that natural minerals usually do not loose hydrogen as water, but as H2 generated by redox reaction of OH with Fe2+. Moreover, diffusion coefficients of different mantle minerals can vary by orders of magnitude, often with significant anisotropy. While some minerals in a mantle xenolith may therefore have lost virtually all of their water during ascent, other minerals may still preserve the original water content and in general, the apparent partition coefficients of water between the minerals of the same xenolith can be totally out of equilibrium. Accordingly, it would be highly desirable to directly deduce the water content in the mantle from geophysical data. One strategy, based on seismic velocities and therefore ultimately on the effect of water on the equation of state of minerals, is outlined by Steve Jacobsen. The dissolution of water in minerals usually increases the number of cation vacancies, yielding reduced bulk and shear moduli and seismic velocities. Particularly, the effect on shear velocities is strong and probably larger than the effect expected from local temperature variations. Accordingly, the vs/vp ratio could be a sensitive indicator of mantle hydration. A more general approach towards remote sensing of hydrogen in the Earth's mantle, including effects of seismic anisotropy due to lattice preferred orientation and the use of electrical conductivity data is presented by Shun-ichiro Karato. Probably the most important effect of water on geodynamics is related to the fact that even traces of water dramatically reduce the mechanical strength of rocks during deformation. The physics behind this effect is discussed by David Kohlstedt. Interestingly, it appears that the main mechanism behind "hydrolytic weakening" is related to the effect of water on the concentration and mobility of Si vacancies, rather than to the protons themselves. Water may have major effects on the location of mantle discontinuities, as reviewed by Eiji Ohtani and Konstantin Litasov. Most of these effects can be rationalized as being due to the expansion of the stability fields of those phases (e.g., wadsleyite) that preferentially incorporate water. Together with other geophysical data, the changes in the depths of discontinuities are a promising tool for the remote sensing of water contents in the mantle. The global effects of water on the evolution of our planet are reviewed in the last two chapters by Bernard Marty, Reika Yokochi and Klaus Regenauer-Lieb. By combining hydrogen und nitrogen isotope data, Marty and Yokochi demonstrate convincingly that most of the Earth's water very likely originated from a chondritic source. Water may have had a profound effect on the early evolution of our planet, since a water-rich dense atmosphere could have favored melting by a thermal blanketing effect. However, Marty and Yokochi also show very clearly that it is pretty much impossible to derive reliable estimates of the Earth's present-day water content from cosmochemical arguments, since many factors affecting the loss of water during and after accretion are poorly constrained or not constrained at all. In the last chapter, Klaus Regenauer-Lieb investigates the effect of water on the style of global tectonics. He demonstrates that plate tectonics as we know it is only possible if the water content of the mantle is above a threshold value. The different tectonic style observed on Mars and Venus may therefore be directly related to differences in mantle water content. Earth is the water planet — not just because of it's oceans, but also because of its tectonic evolution.

Description / Table of Contents: The very successful orbital missions of the 1990's, Clementine and Lunar Prospector, provided key mineralogical, geochemical, and geophysical data sets that extended our view of the Moon beyond what we knew from Apollo and Luna exploration to a truly global perspective. These new data sets have been integrated with information gained from three preceding decades of study of lunar samples and older, less complete remotely sensed data sets. Although there have been no new lunar sample-return missions since Apollo and Luna, new samples are available in the form of meteorites, recognized to be pieces of the Moon. These, too, play a role in improved knowledge of the Moon and in helping to couple information obtained by remote sensing with information obtained from rock and soil samples. As we stand on the edge of a new era of lunar and planetary exploration, including new missions to the Moon, Mars, and other planets and moons, we find it essential to examine in depth how the wide variety of data sets obtained during the course of lunar exploration can be used together to better understand the formation of the Moon and how it evolved to its present state. Such an understanding holds important lessons for the new era of lunar exploration as well as the exploration of other planets in the Solar System. This will ultimately lead to better knowledge of how our own planet Earth - with its unique environment suitable for the origin and evolution of life - originated and changed with time. This book assesses the current state of knowledge of lunar geoscience, given the data sets provided by missions of the 1990's, and lists remaining key questions as well as new ones for future exploration to address. It documents how a planet or moon other than the world on which we live can be studied and understood in light of integrated suites of specific kinds of information. The Moon is the only body other than Earth for which we have material samples of known geologic context for study. This book seeks to show how the different kinds of information gained about the Moon relate to each other and also to learn from this experience, thus allowing more efficient planning for the exploration of other worlds.

Description / Table of Contents: For over half a century neutron scattering has added valuable information about the structure of materials. Unlike X-rays that have quickly become a standard laboratory technique and are available to all modern researchers in physics, chemistry, materials and earth sciences, neutrons have been elusive and reserved for specialists. A primary reason is that neutron beams, at least so far, are only produced at large dedicated facilities with nuclear reactors and accelerators and access to those has been limited. Yet there are a substantial number of experiments that use neutron scattering. While earth science users are still a small minority, neutron scattering has nevertheless contributed valuable information on geological materials for well over half a century. Important applications have been in crystallography (e.g. atomic positions of hydrogen and Al-Si ordering in feldspars and zeolites, Mn-Fe-Ti distribution in oxides), magnetic structures, mineral physics at non-ambient conditions and investigations of anisotropy and residual strain in structural geology and rock mechanics. Applications range from structure determinations of large single crystals, to powder refinements and short-range order determination in amorphous materials. Zeolites, feldspars, magnetite, carbonates, ice, clathrates are just some of the minerals where knowledge has greatly been augmented by neutron scattering experiments. Yet relatively few researchers in earth sciences are taking advantage of the unique opportunities provided by modern neutron facilities. The goal of this volume, and the associated short course by the Mineralogical Society of America held December 7-9 in Emeryville/Berkeley CA, is to attract new users to this field and introduce them to the wide range of applications. As the following chapters will illustrate, neutron scattering offers unique opportunities to quantify properties of earth materials and processes. Focus of this volume is on scientific applications but issues of instrumental availabilities and methods of data processing are also covered to help scientists from such diverse fields as crystallography, mineral physics, geochemistry, rock mechanics, materials science, biomineralogy become familiar with neutron scattering. A few years ago European mineralogists spearheaded a similar initiative that resulted in a special issue of the European Journal of Mineralogy (Volume 14, 2002). Since then the field has much advanced and a review volume that is widely available is highly desirable. At present there is really no easy access for earth scientists to this field and a more focused treatise can complement Bacon's (1955) book, now in its third edition, which is still a classic. The purpose of this volume is to provide an introduction for those not yet familiar with neutrons by describing basic features of neutrons and their interaction with matter as well illustrating important applications. The volume is divided into 17 Chapters. The first two chapters introduce properties of neutrons and neutron facilities, setting the stage for applications. Some applications rely on single crystals (Chapter 3) but mostly powders (Chapters 4-5) and bulk polycrystals (Chapters 15-16) are analyzed, at ambient conditions as well as low and high temperature and high pressure (Chapters 7-9). Characterization of magnetic structures remains a core application of neutron scattering (Chapter 6). The analysis of neutron data is not trivial and crystallographic methods have been modified to take account of the complexities, such as the Rietveld technique (Chapter 4) and the pair distribution function (Chapter 11). Information is not only obtained about solids but about liquids, melts and aqueous solutions as well (Chapters 11-13). In fact this field, approached with inelastic scattering (Chapter 10) and small angle scattering (Chapter 13) is opening unprecedented opportunities for earth sciences. Small angle scattering also contributes information about microstructures (Chapter 14). Neutron diffraction has become a favorite method to quantify residual stresses in deformed materials (Chapter 16) as well as preferred orientation patterns (Chapter 15). The volume concludes with a short introduction into neutron tomography and radiography that may well emerge as a principal application of neutron scattering in the future (Chapter 17).

Description / Table of Contents: The publication of this volume occurs at the one-hundredth anniversary of 1905, which has been called the annus mirabilus because it was the year of a number of enormous scientific advances. Among them are four papers by Albert Einstein explaining (among other things) Brownian motion, the photoelectric effect, the special theory of relativity, and the equation E = mc2. Also of significance in 1905 was the first application of another major advance in physics, which dramatically changed the fields of Earth and planetary science. In March of 1905 (and published the following year), Ernest Rutherford presented the following in the Silliman Lectures at Yale: "The helium observed in the radioactive minerals is almost certainly due to its production from the radium and other radioactive substances contained therein. If the rate of production of helium from known weights of the different radioelements were experimentally known, it should thus be possible to determine the interval required for the production of the amount of helium observed in radioactive minerals, or, in other words, to determine the age of the mineral." Rutherford E (1906) Radioactive Transformations. Charles Scriber's Sons, NY Thus radioisotopic geochronology was born, almost immediately shattering centuries of speculative conjectures and estimates and laying the foundation for establishment of the geologic timescale, the age of the Earth and meteorites, and a quantitative understanding of the rates of processes ranging from nebular condensation to Quaternary glaciations. There is an important subplot to the historical development of radioisotopic dating over the last hundred years, which, ironically, arises directly from the subsequent history of the U-He dating method Rutherford described in 1905. Almost as soon as radioisotopic dating was invented, it was recognized that the U-He [or later the (U-Th)/He method], provided ages that were often far younger than those allowed by stratigraphic correlations or other techniques such as U/Pb dating. Clearly, as R.J. Strutt noted in 1910, He ages only provided "minimum values, because helium leaks out from the mineral, to what extent it is impossible to say" (Strutt, 1910, Proc Roy Soc Lond, Ser A 84:379-388). For several decades most attention was diverted to U/Pb and other techniques better suited to measurement of crystallization ages and establishment of the geologic timescale. Gradually it became clear that other radioisotopic systems such as K/Ar and later fission-track also provided ages that were clearly younger than formation ages. In 1910 it may have been impossible to say the extent to which He (or most other elements) leaked out of minerals, but eventually a growing understanding of thermally-activated diffusion and annealing began to shed light on the significance of such ages. The recognition that some systems can provide cooling, rather than formation, ages, was gradual and diachronous across radioisotopic systems. Most of the heavy lifting in this regard was accomplished by researchers working on the interpretation of K/Ar and fission-track ages. Ironically, Rutherfordπs He-based radioisotopic system was one of the last to be quantitatively interpreted as a thermochronometer, and has been added to K/Ar (including 40Ar/39Ar) and fission-track methods as important for constraining the medium- to low-temperature thermal histories of rocks and minerals. Thermochronology has had a slow and sometimes fitful maturation from what were once troubling age discrepancies and poorly-understood open-system behaviors, into a powerful branch of geochronology applied by Earth scientists from diverse fields. Cooling ages, coupled with quantitative understanding of crystal-scale kinetic phenomena and crustal- or landscape-scale interpretational models now provide an enormous range of insights into tectonics, geomorphology, and subjects of other fields. At the same time, blossoming of lower temperature thermochronometric approaches has inspired new perspectives into the detailed behavior of higher temperature systems that previously may have been primarily used for establishing formation ages. Increased recognition of the importance of thermal histories, combined with improved analytical precision, has motivated progress in understanding the thermochronologic behavior of U/Pb, Sm/Nd, Lu/Hf, and other systems in a wide range of minerals, filling out the temperature range accessible by thermochronologic approaches. Thus the maturation of low- and medium-temperature thermochronology has led to a fuller understanding of the significance of radioisotopic ages in general, and to one degree or another has permeated most of geochronology. Except in rare cases, the goal of thermochronology is not thermal histories themselves, but rather the geologic processes responsible for them. Thermochronometers are now routinely used for quantifying exhumation histories (tectonic or erosional), magmatism, or landscape evolution. As thermochronology has matured, so have model and interpretational approaches used to convert thermal histories into these more useful geologic histories. Low-temperature thermochronology has been especially important in this regard, as knowledge of thermal processes in the uppermost few kilometers of the crust require consideration of coupled interactions of tectonic, geodynamic, and surface processes. Exciting new developments in these fields in turn drive improved thermochronologic methods and innovative sampling approaches. The chapters This volume presents 22 chapters covering many of the important modern aspects of thermochronology. The coverage of the chapters ranges widely, including historical perspective, analytical techniques, kinetics and calibrations, modeling approaches, and interpretational methods. In general, the chapters focus on intermediate- to low-temperature thermochronometry, though some chapters cover higher temperature methods such as monazite U/Pb closure profiles, and the same theory and approaches used in low-temperature thermochronometry are generally applicable to higher temperature systems. The widely used low- to medium-temperature thermochronometric systems are reviewed in detail in these chapters, but while there are numerous chapters reviewing various aspects of the apatite (U-Th)/He system, there is no chapter singularly devoted to it, partly because of several previous reviews recently published on this topic. Chapter 1 by Reiners, Ehlers, and Zeitler provides a perspective on the history of thermochronology, comments on modern work in this field and general lessons on the potential for noise to be turned into signal. This chapter also provides a summary of the current challenges, unresolved issues, and most exciting prospects in the field. Much of the modern understanding of kinetic controls on apparent ages, thermal histories, and sampling approaches comes from decades of progress in fission-track dating, a method that remains as essential as ever, partly because of the power of track-length measurements and the depth of (at least empirical) understanding of the kinetics of track annealing. Tagami, Donelick and OπSullivan review the fundamentals of modern fission-track dating (Chapter 2). Two of the most commonly dated, well-understood, and powerful minerals dated by fission-track methods are apatite and zircon, and the specifics of modern methods for these systems and their kinetics are reviewed by Donelick, OπSullivan, and Ketcham (Chapter 3), and Tagami (Chapter 4). Although 40Ar/39Ar and (U-Th)/He dating methods followed somewhat different paths to their modern thermochronologic incarnations, they have many features in common, especially in the kinetics of diffusion and closure. Zeitler and Harrison review the concepts underlying both 40Ar/39Ar and (U-Th)/He methods (Chapter 5). Zircon was one of the first minerals dated by the (U-Th)/He method, but has only just begun to be used for thermochronometry of both bedrock and detrital samples, as reviewed by Reiners (Chapter 6). Continuous time-temperature paths from intracrystalline variations of radiogenic Ar proven perhaps the most powerful of all thermochronologic approaches, and an innovative analogous approach in He dating (4He/3He thermochronometry) is revealing remarkably powerful constraints on the extreme low temperature end of thermal histories, as reviewed by Shuster and Farley (Chapter 7). Thermochronology of detrital minerals provides unique constraints on the long-term evolution of orogens, sediment provenance, and depositional age constraints, to name a few. Bernet and Garver (Chapter 8) review the essentials of detrital zircon fission-track dating, one of the most venerable and robust of detrital thermochronometers, and in Chapter 9, Hodges, Ruhl, Wobus, and Pringle review the use of 40Ar/39Ar dating of detrital minerals, demonstrating the power of detrital muscovite ages in illuminating variations in exhumation rates in catchments over broad landscapes. (U-Th)/He thermochronometry presents several unique interpretational challenges besides new kinetics and low temperature sensitivity. One of these is long-alpha stopping distances, and its coupling with diffusion and U-Th zonation in age corrections. Dunai reviews modeling approaches to deal with these issues in interpreting low-temperature thermal histories (Chapter 10). Ketcham (Chapter 11) reviews the theory and calibration of both forward and inverse models of thermal histories from fission-track and (U-Th)/He data, and makes some important points about the interpretations of such models. Translating thermal histories into exhumational histories and their tectonic or geomorphic significance across a landscape requires quantitative understanding of the thermal structure of the crust and how it is perturbed, a review of which is presented by Ehlers (Chapter 12). Braun (Chapter 13) illustrates the power of low-temperature thermochronometry to constrain topographic evolution of landscapes over time, using PECUBE. Gallagher, Stephenson, Brown, Holmes, and Ballester present a novel method of inverse modeling of fission-track and (U-Th)/He data for thermal histories over landscapes (Chapter 14). Continuous time-temperature paths from closure profiles or their step-heating-derived equivalents are, to some degree, the holy grail of thermochronology. Harrison, Zeitler, Grove, and Lovera (Chapter 15) provide a review of the theory, measurement, and interpretation of continuous thermal histories at both intermediate and high temperatures, derived from both K-feldspar 40Ar/39Ar and monazite U/Pb dating. Extensional orogens provide a special challenge and opportunity for thermochronometry because tectonic exhumation by footwall unroofing often outstrips erosional exhumation, and often occurs at high rates. As Stockli shows (Chapter 16) thermochronology in these setting provides opportunities to measure rates of a number of important processes, as well as obtain a snapshot of crustal thermal structure and its imprint on thermochronometers with varying closure temperatures. Spotila (Chapter 17) reviews the use of thermochronology applied to tectonic geomorphology in a wide range of orogenic settings, introducing the concept of denudational maturity. Thermochronology has found great utility in economic geology, and newly developed approaches pose great potential in this area, and shown by McInnes, Evans, Fu, and Garwin in their review of the use and modeling of thermochronology of hydrothermal ore deposits (Chapter 18). The thermal histories of sedimentary basins are also critical to understanding thermal maturation of hydrocarbons, but are also critical for understanding basin formation, erosional histories of source regions, fluid flow, and climate change and other temporal signals preserved in sedimentary rocks. Armstrong (Chapter 19) reviews these issues and the use of thermochronology in deducing the thermal histories of sedimentary basins. Drawing on large datasets of bedrock apatite fission-track dates, Kohn, Gleadow, Brown, Gallagher, Lorencak, and Noble demonstrate the power of modeling, and, importantly, effectively visualizing, integrated thermotectonic and denudational histories over large regions (Chapter 20). Thermal histories of meteorites provide constraints on a wide range of fundamentally important processes, including nebular condensation and early solar-system metamorphic histories, and the dynamics of interplanetary collisions and shock metamorphism. Min reviews thermochronologic approaches to understanding meteorite thermal histories (Chapter 21), including new methods and approaches. Finally, the importance of robust models with which to interpret thermochronologic data is underscored by the review of the Software for Interpretation and Analysis of Thermochronologic Data (Chapter 22), summarized and compiled by Ehlers, for programs associated with the work of authors in this volume and others.

Description / Table of Contents: As geomicrobiologists, we seek to understand how some of nature's most complex systems work, yet the very complexity we seek to understand has placed many of the insights out of reach. Recent advances in cultivation methodologies, the development of ultrahigh throughput DNA sequencing capabilities, and new methods to assay gene expression and protein function open the way for rapid progress. In the eight years since the first Geomicrobiology volume (Geomicrobiology: Interactions between microbes and minerals; volume 35 in this series) we have transformed into scientists working hand in hand with biochemists, molecular biologists, genome scientists, analytical chemists, and even physicists to reveal the most fundamental molecular-scale underpinnings of biogeochemical systems. Through synthesis achieved by integration of diverse perspectives, skills, and interests, we have begun to learn how organisms mediate chemical transformations, the ways in which the environment determines the architecture of microbial communities, and the interplay between evolution and selection that shapes the biodiversity of the planet. This volume presents chapters written by leaders in the rapidly maturing field we refer to as molecular geomicrobiology. Most of them are relatively young researchers who share their approaches and insights and provide pointers to exciting areas ripe for new advances. This volume ties together themes common to environmental microbiology, earth science, and astrobiology. The resesarch presented here, the associated short course, and the volume production were supported by funding from many sources, notably the Mineralogical Society of America, the Geochemical Society, the US Department of Energy Chemical Sciences Program and the NASA Astrobiology Institute.

Description / Table of Contents: Contents: 1. The Discovery of Silicate Melts. An Industrial and Geological Perspective. 2. Glass Versus Melt. 3. Glasses and Melts vs. Crystals. 4. Melt and Glass Structure - Basic Concepts. 5. Silica - A Deceitful Simplicity. 6. Binary Metal Oxide-Silica Systems I. Physical Properties.7. Binary Metal Oxide-Silica Systems II. Structure. 8. Aluminosilicate Systems I. Physical Properties. 9. Aluminosilicate Systems II. Structure. 10. Iron-bearing Melts I. Physical Properties. 11. Iron-bearing Melts II. Structure. 12. The Titanium Anomalies. 13. Phosphorus. 14. Water - An Elusive Component. 15. Volatiles I. The System C-O-H-S. 16. Volatiles II. Noble Gases and Halogens. 17. Natural Melts.