Publikationsdatum:
2017-04-04
Beschreibung:
The evaluation of seismic hazard over wide territories is a basic tool for planning activities aimed at earthquake damage mitigation.
This is commonly performed through probabilistic approaches based on the statistical analysis of past seismicity.
Among these, due to its wide application worldwide, the Cornell-McGuire approach (Cornell 1968; McGuire 1978) has become a kind of “standard” methodology for probabilistic seismic
hazard assessment (PSHA). In Italy, several national seismic hazard maps were produced in recent years (Slejko et al. 1998; Albarello et al. 2000; MPS Working Group 2004) by following this procedure as implemented by Bender and Perkins (1987). Yet despite its widespread application, this standard methodology
presents severe drawbacks due to its strong sensitivity to some ill-defined aspects, such as geometry of seismic sources, attenuation of ground motion with distance from the source, completeness of available seismic catalogs, etc. Moreover, this kind of approach does not allow the full exploitation of a large amount of documentary data available at the site about the seismic
effects of past earthquakes (Albarello and Mucciarelli 2003). Another drawback is that the standard approach was developed with the assumption that the seismicity database used to feed the computational model is constituted by instrumental data (magnitude, epicentral locations, etc.). However, in many countries
(first and foremost, Italy) the bulk of the seismic database is constituted by macroseismic data, and thus the application of the standard method requires a “forcing” of macroseismic information into a para-instrumental format. But macroseismic
information is not isomorphic to instrumental data since intensity values are discrete, ordinal, and range-limited. This implies that, in principle, mathematical formalizations suitable to instrumental information cannot be used to manage macroseismic
data (see, e.g., Pasolini et al. 2008a, 2008b).
To overcome some of these difficulties and to better exploit available information, probabilistic hazard evaluations based on observed intensity data were performed in Europe (Monachesi et al. 1994; Papoulia and Slejko 1997; Azzaro et al. 1999; Albarello et al. 2002) and Japan (Bozkurt et al. 2007) using alternative numerical procedures. An apparent limitation of these studies is the fact that PSH estimates are provided in terms of intensity, and this conflicts with the fact that ground acceleration
still remains the traditional output of PSHA devoted to seismic design. However, a new interest has recently grown around macroseismic intensity. In fact, when damage scenarios and post-earthquake emergency planning are of concern, hazard
assessment in terms of intensity as ground-shaking measure may be more suitable than conventional estimates based on instrumental parameters (PGA, etc.). A further possible advantage
of these kinds of approaches is that they provide hazard evaluations completely independent from the standard ones and more directly linked to empirical observations (local seismic
history). Thus, they could represent a useful benchmark for a direct assessment of reliability of traditional PSH estimates (Mucciarelli et al. 2000, 2006, 2008; Bozkurt et al. 2007).
In this paper we present the computer program SASHA (Site Approach to Seismic Hazard Assessment), which implements
the intensity-based PSHA procedure originally proposed
by Magri et al. (1994) and then improved by Albarello and Mucciarelli (2002). It relies on the analysis of the site seismic
history, i.e., the dataset of seismic effects (macroseismic intensities) documented during past earthquakes at a given locality. This methodology (hereafter, site approach) has been specifically developed to handle macroseismic data, and thus both the peculiar nature of intensity values (discrete, ordinal, range-limited) and relevant uncertainty (ill-defined intensity values, completeness of site seismic history, etc.) are taken into account by a coherent statistical approach that does not require any assumption about earthquake recurrence model and seismic
source geometry. Furthermore, no aftershock removal is required in advance and epicentral data are only considered to integrate (when necessary) felt data at the site. Several PSHA studies have been performed in the last decade in Italy using different versions of the site approach (Mucciarelli et al. 2000; Albarello et al. 2002; D’Amico and Albarello 2003; Albarello, Azzaro et al. 2007; Azzaro et al. 2008).
SASHA’s theoretical background is briefly outlined in the next section of the paper. Then, we describe the most important
features of SASHA along with a sample application to the Italian area.
Beschreibung:
Published
Beschreibung:
663-671
Beschreibung:
4.2. TTC - Scenari e mappe di pericolosità sismica
Beschreibung:
JCR Journal
Beschreibung:
reserved
Schlagwort(e):
computational code
;
probabilistic seismic hazard assessment
;
intensity data
;
04. Solid Earth::04.06. Seismology::04.06.11. Seismic risk
;
05. General::05.01. Computational geophysics::05.01.05. Algorithms and implementation
Repository-Name:
Istituto Nazionale di Geofisica e Vulcanologia (INGV)
Materialart:
article
Permalink
