ALBERT

Description: Natural polyphenols contained in olive mill wastewaters (OMW) have been usually associated with great bioactive properties as “antioxidants”. In this work, we recovered the polyphenols after adsorption onto natural clay “ghassoul” by different solvents: water, ethyl acetate, and methanol (PPW, PPA, and PPM, respectively) to avoid environmental pollution. Also, we tested the antioxidant activity of the extracted polyphenols by two methods: 1,1-diphenyl-2-picrylhydrazyl (DPPH) and total antioxidant capacity (TAC). Then, we analyzed antimicrobial activity by the microdilution technique to determine at the minimum inhibitory concentration (MIC) and the minimum bactericidal concentration (MBC). The OMW of the Fez-Meknes region has a very acidic pH, considerable amounts of mineral matter, and a high concentration of polyphenols and organic content. The results of the test from DPPH showed good antiradical potential for polyphenols extracted with water, but the TAC showed an important capacity for all extracts unless PPA. The antibacterial activity is not the same on the four bacteria studied (Escherichia coli, Salmonella sp, Staphylococcus aureus, and Enterococcus faecalis), and all extracts inhibit most tested germs that do not have the same MIC and the same sensitivity. Only the PPW showed the minimum bactericidal concentration (MBC) that is equal to 0.290 mg/mL for Salmonella sp and Staphylococcus aureus, which confirms that the extraction by water of the adsorbed polyphenols is an original solution to recover the polyphenols and also to obtain a natural phenolic antioxidant which can be used in the pharmaceutical, nourishment, and cosmetic industry.

Description: With the advancement in ICT, web search engines have become a preferred source to find health-related information published over the Internet. Google alone receives more than one billion health-related queries on a daily basis. However, in order to provide the results most relevant to the user, WSEs maintain the users’ profiles. These profiles may contain private and sensitive information such as the user’s health condition, disease status, and others. Health-related queries contain privacy-sensitive information that may infringe user’s privacy, as the identity of a user is exposed and may be misused by the WSE and third parties. This raises serious concerns since the identity of a user is exposed and may be misused by third parties. One well-known solution to preserve privacy involves issuing the queries via peer-to-peer private information retrieval protocol, such as useless user profile (UUP), thereby hiding the user’s identity from the WSE. This paper investigates the level of protection offered by UUP. For this purpose, we present QuPiD (query profile distance) attack: a machine learning-based attack that evaluates the effectiveness of UUP in privacy protection. QuPiD attack determines the distance between the user’s profile (web search history) and upcoming query using our proposed novel feature vector. The experiments were conducted using ten classification algorithms belonging to the tree-based, rule-based, lazy learner, metaheuristic, and Bayesian families for the sake of comparison. Furthermore, two subsets of an America Online dataset (noisy and clean datasets) were used for experimentation. The results show that the proposed QuPiD attack associates more than 70% queries to the correct user with a precision of over 72% for the clean dataset, while for the noisy dataset, the proposed QuPiD attack associates more than 40% queries to the correct user with 70% precision.

Description: Magnetically separable strontium hexaferrite SrFe12O19 was prepared using the chemical coprecipitation method, and the nanostructured material was characterized by X-ray diffraction, scanning electron microscopy (SEM), energy-dispersive spectrometry (EDS), and BET analysis. The SEM images showed the homogeneity of the chemical composition of SrFe12O19 and uniform distribution of size and morphology. The pore size of the nanomaterial and its specific area were determined by BET measurements. Strontium hexaferrite SrFe12O19 exhibited a strong magnetic field, which is highly suitable in the heterogeneous catalysis as it can be efficiently separated from the reaction. The magnetic nanocatalyst showed high activity and environmentally benign heterogeneous catalysts for the epoxide ring-opening with amines affording β-amino alcohols under solvent-free conditions. When unsymmetrical epoxides were treated in the presence of aromatics amines, the regioselectivity was influenced by the electronic and steric factors. Total regioselectivity was observed for the reactions performed with aliphatic amines. The magnetically SrFe12O19 nanocatalyst showed excellent recyclability with continuously good catalytic activities after four cycles.

Description: In this paper, we present a mathematical model that describes agree-disagree opinions during polls. We first present the different compartments of the model. Then, using the next-generation matrix method, we derive thresholds of the stability of equilibria. We consider two sets of data from the Reuters polling system regarding the approval rating of the U.S presidential in two terms. These two weekly polls data track the percentage of Americans who approve and disapprove of the way the President manages his work. To validate the reality of the underlying model, we use nonlinear least-squares regression to fit the model to actual data. In the first poll, we consider only 31 weeks to estimate the parameters of the model, and then, we compare the rest of the data with the outcome of the model over the remaining 21 weeks. We show that our model fits correctly the real data. The second poll data is collected for 115 weeks. We estimate again the parameters of the model, and we show that our model can predict the poll outcome in the next weeks, thus, whether the need for some control strategies or not. Finally, we also perform several computational and statistical experiments to validate the proposed model in this paper. To study the influence of various parameters on these thresholds and to identify the most influential parameters, sensitivity analysis is carried out to investigate the effect of the small perturbation near a parameter value on the value of the threshold. An uncertainty analysis is performed to evaluate the forecast inaccuracy in the outcome variable due to uncertainty in the estimation of the parameters.

Description: This paper presents the simulation of a two-rotor aircraft in different geometric configurations during hover flight. The analysis was performed using an implementation of the unsteady vortex-lattice method (UVLM). A description of the UVLM is presented as well as the techniques used to enhance the stability of results for rotors in hover flight. The model is validated for an isolated rotor in hover, comparing numerical results to experimental data (high-Reynolds, low-Mach conditions). Results show that an exclusion of the root vortex generates a more stable wake, without affecting results. Results for the two-rotor aircraft show an important influence of the number of blades on the vertical thrust. Furthermore, the geometric configuration has a considerable influence on the pitching moment.

Description: The reproducing kernel algorithm is described in order to obtain the efficient analytical-numerical solutions to nonlinear systems of two point, second-order periodic boundary value problems with finitely many singularities. The analytical-numerical solutions are obtained in the form of an infinite convergent series for appropriate periodic boundary conditions in the space , whilst two smooth reproducing kernel functions are used throughout the evolution of the algorithm to obtain the required nodal values. An efficient computational algorithm is provided to guarantee the procedure and to confirm the performance of the proposed approach. The main characteristic feature of the utilized algorithm is that the global approximation can be established on the whole solution domain, in contrast with other numerical methods like onestep and multistep methods, and the convergence is uniform. Two numerical experiments are carried out to verify the mathematical results, whereas the theoretical statements for the solutions are supported by the results of numerical experiments. Our results reveal that the present algorithm is a very effective and straightforward way of formulating the analytical-numerical solutions for such nonlinear periodic singular systems.

Description: This work aims to present the modification of polypropylene (PP) membranes using three different biopolymers, chitosan (CHI), potato starch (PS), and cellulose (CEL), in order to obtain three new materials. The modified membranes may be degraded easier than polypropylene ones and could be used as selective membranes for metal ions removal, among other applications. For this purpose, the UV energy induced graft copolymerization reaction among polypropylene membrane, acrylic acid, benzophenone (as photoinitiator), and the biopolymer (CHI, PS, or CEL) was conducted. The results of FT-IR-ATR, XRD, TGA, DSC, SEM, BET, and AFM analyses and mechanical properties clearly indicate the successful modification of the membrane surface. The change of surface wettability was monitored by contact angle. The grafting reaction depends on natural polymer, reaction time, and concentration. In order to prove the potential application of the modified membranes, a preliminary study of sorption of metal ion was carried out. For this purpose, the PP-CHI membrane was chosen because of the high hydrophilicity, proportionate to -OH and NH2; these groups could act as ligands of metal ions, provoking the interaction between PP-CHI and M+ (PP-CHI-M+) and therefore the metal ion removal from water.

Description: Recently, an alternative robust control chart based on a new robust estimator known as minimum vector variance (MVV) estimator, , was introduced in Phase II. was able to detect out-of-control signal and simultaneously control false alarm rate even as the dimension increased. However, the estimated UCLs of are large as compared to the traditional chart. In this study, we improved the MVV estimators in terms of consistency and bias. The result showed great improvement in the control limit values while maintaining its good performance in terms of false alarm and probability of detection.

Description: Modular production and component commonality are two widely used strategies in the manufacturing industry to meet customers growing needs for customized products. Using these strategies, companies can enhance their performance to achieve optimal safety stock levels. Despite the importance of safety stocks in business competition, little attention has been paid to the way to reduce them without affecting the customer service levels. This paper develops a mathematical model to reduce safety stock levels in organizations that employ modular production. To construct the model, we take advantage of the benefits of aggregate inventories, standardization of components, component commonality, and Group Technology philosophy in regard to stock levels. The model is tested through the simulation of three years of operation of two modular product systems. For each system, we calculated and compared the safety stock levels for two cases: () under the only presence of component commonality and () under the presence of both component commonality and Group Technology philosophy. The results show a reduction in safety stock levels when we linked the component commonality with the Group Technology philosophy. The paper presents a discussion of the implications of each case, features of the model, and suggestions for future research.

Description: Many problems with control theory have led to investigations into switched systems. One of the most urgent problems related to the analysis of the dynamics of switched systems is the stability problem. The stability of a switched system can be ensured by a common Lyapunov function for all switching modes under an arbitrary switching law. Finding a common Lyapunov function is still an interesting and challenging problem. The purpose of the present paper is to prove the stability of equilibrium in a certain class of nonlinear switched systems by introducing a common Lyapunov function; the Lyapunov function is based on generalized Kullback–Leibler divergence or Csiszár's I-divergence between the state and equilibrium. The switched system is useful for finding positive solutions to linear algebraic equations, which minimize the I-divergence measure under arbitrary switching. One application of the stability of a given switched system is in developing a new approach to reconstructing tomographic images, but nonetheless, the presented results can be used in numerous other areas.