ALBERT

Notes: A family with examples of the rare condition known as ‘inherited mosaicism affecting the ABO blood groups’ has been studied. In this family there were five examples of Bmos:O mosaicism. Blood group gene-specified transferase estimations were studied in this condition for the first time. In ‘affected' members, levels of B gene-specified transferease were low, and amounted to only 7-10% of the activity of a normal control. It is proposed that Bmos is correctly classified as a new form of weak B.

Notes: Cad, Sd(a++) or Super Sda is a rare, inherited, dominant blood group character which is of much interest, not only with regard to problems in pretransfusion tests (erythrocyte polyagglutination) but also in the field of lectin specificity. We have studied this blood group character in a British family with Eastern connections and present a brief account of its serological and clinical importance. Most persons are Sd(a+) but there is a wide distribution of antigen strength, ranging from ordinary Sd(a+) to Cad. Most persons also have weak anti-Sda in their serum; this is ordinarily of no clinical importance, but could cause problems if Cad bloods are transfused. The chief structural determinant of Cad specificity is N-acetyl-d-galactosamine in α-linked position, yet it is clearly distinguishable by use of appropriate lectins from other blood group antigens, A and Tn, which also have this acetyl-hexosamine as their chief structural determinant. A method for the rapid identification of Cad, applicable to all ABO groups, is described. The lectin of Dolichos biflorus, which is specific for N-acetyl-d-galactosamine in α-linked position, reacts strongly with A(A1), Tn and Cad cells, its action on Cad cells being much the strongest. Absorption-elution studies show that one and the same lectin reacts with both A1 and Tn cells. Absorption with Cad cells abolishes activity for A1, Tn and Cad cells; whereas absorption with A1 or Tn cells leaves activity for Cad. This does not necessarily indicate that anti-Cad is a separate component since the same result can be obtained by simply diluting the Dolichos reagent. However, eluates from Cad cells react only with Cad cells, whereas eluates from A1 or Tn cells react with A1, Tn and Cad cells.

Notes: Abstract The Qinling–Dabie accretionary fold belt in east-central China represents the E–W trending suture zone between the Sino-Korean and Yangtze cratons. A portion of the accretionary complex exposed in northern Hubei Province contains a high-pressure/low-temperature metamorphic sequence progressively metamorphosed from the blueschist through greenschist to epidote–amphibolite/eclogite facies. The ‘Hongan metamorphic belt’can be divided into three metamorphic zones, based on progressive changes in mineral assemblages: Zone I, in the south, is characterized by transitional blueschist–greenschist facies; Zone II is characterized by greenschist facies; Zone III, in the northernmost portion of the belt, is characterized by eclogite and epidote–amphibolite facies sequences. Changes in amphibole compositions from south to north as well as the appearance of increasingly higher pressure mineral assemblages toward the north document differences in metamorphic P–T conditions during formation of this belt. Preliminary P–T estimates for Zone I metamorphism are 5–7 kbar, 350–450°C; estimates for Zone III eclogites are 10–22 kbar, 500 ± 50°C.The petrographic, chemical and structural characteristics of this metamorphic belt indicate its evolution in a northward-dipping subduction zone and subsequent uplift prior to and during the final collision between the Sino-Korean and Yangtze cratons.

Notes: Abstract Mineral equilibria in the system CaO–MgO–Al2O3–SiO2–H2O provide a basis for mapping of four reaction isograds and one bathograd in the low-pressure transition from subgreenschist to greenschist facies. Most of the Matachewan area of the Abitibi greenstone belt is in the lower-pressure bathozone, as indicated by the widespread occurrences of the subassemblage Prh–Chl. The higher-pressure bathozone is indicated by two occurrences of Pmp–Act–Ep–Qtz, but in these samples the bathograd is displaced to anomalously low pressure by the high Fe content of the coexisting minerals. This illustrates the need to analyse coexisting minerals, calculate activities of end-member species, and compute P–T curves for individual samples before interpreting the isograd/bathograd pattern.Petrographic and microprobe analysis indicates that great care must be taken in the selection of ‘equilibrium’ assemblages. Pyroxene phenocrysts in one sample are replaced by the assemblage Pmp–Act–Ep–Chl–Qtz, whereas Prh–Act–Ep–Chl–Qtz occurs in the groundmass. Compositional variation may be more cryptic, as in a sample of metabasaltic hyaloclastite that contains two spatially distinct ‘univariant’ assemblages, Prh–Pmp–Ep–Chl–Qtz and Prh–Act–Ep–Chl–Qtz, within the devitrified matrix. Whereas chlorite compositions are similar in both assemblages, prehnite and epidote in the latter assemblage are significantly richer in Fe and poorer in Al. Accordingly, the rock is interpreted to contain two distinct ‘univariant’ assemblages, rather than one ‘invariant’ assemblage (Prh–Pmp–Act–Ep–Chl–Qtz). The displaced ‘univariant’ curves for this sample intersect at 2.2 kbar and 250°C.Taking account of all thermobarometric implications, the low-grade limit of the greenschist facies is at 250–270°C and 2–2.5 kbar, corresponding to depths of 7–8 km. Comparison of apparent P–T conditions on both sides of the Larder Lake – Cadillac break, a regional CO2-metasomatized fault zone that is spatially associated with many Archaean gold deposits, provides an upper limit of not more than c. 1 km for post-metamorphic south-side-up, dip-slip displacement.

Notes: Metabasaltic rocks in the Klamath Mountains of California with ‘komatiitic’ major element concentrations were investigated in order to elucidate the origin of the magnesian signature. Trace-element concentrations preserve relict igneous trends and suggest that the rocks are not komatitic basalts, but immature arc rocks and within-plate alkalic lavas. Correlation of ‘excess’ MgO with the volume per cent hornblende (±clinopyroxene) suggests that the presence of cumulus phases contributes to the MgO-rich compositions. Early submarine alteration produced regional δ18O values of +10±1.5%° and shifts in Al2O3, Na2O, and K2O concentrations. Regional metamorphic grade in the study area varies from biotite-zone greenschist facies (350–550°C, c. 3 kbar) southward to prehnite–actinolite facies (200–400°C, ≤3 kbar), but little isotopic or elemental change occurred during the regional recrystallization. The greenschist facies assemblage is actinolitic hornblende + phengite + epidote + sodic plagioclase + microcline + chlorite + titanite + hematite + quartz in Ti-poor metabasaltic rocks; in addition to these phases biotite is present in Ti-rich analogues. Lower grade greenstones contain prehnite and more nearly stoichiometric actinolite. The moderate to low pressures of regional metamorphism are compatible with P–T conditions in a magmatic arc. Later contact metamorphism at 2–2.9±0.5 kbar and at peak temperatures approaching 600° C around the English Peak and Russian Peak granodiorites produced 3–4–km-wide aureoles typified by gradual, systematic increases in the pargasite content of amphibole, muscovite content of potassic white mica, and anorthite content of plagioclase compositions. Metasomatism during contact metamorphism produced further increases in bulk-rock δ18OSMOW of as much as +6%°. Thus, the unusually MgO-rich nature of the Sawyers Bar rocks may be attributed at least partly to metasomatism and the presence of magnesian cumulus phases.

Notes: Observation wells and access holes for neutron probe use were drilled by a jet-percussion drill rig in coarse alluvial material near Tucson, Arizona. The method combines the jetting action which effectively removes loose materials with the percussion necessary to break up tighter formations and large particles. A unique feature of the equipment is the provision for simultaneous drilling and driving the casing to keep the hole open in loose formations. Washed samples of the material being drilled can be obtained from the recirculating water system. Drilling rates were from seven to ten feet per hour, and costs including casing were less than $1.50 per foot. Maximum depth is about 100 feet.Hydrologic study of a ground-water reservoir requires access to the aquifer. Observations are made where the water table intersects the land surface, such as at springs or seeps, or through existing wells. However, wells are not always found in desired locations or are pumped so heavily that their usefulness as observation wells is impaired. Measurements are also made in the unsaturated zone with neutron moisture measuring equipment, which requires a small diameter cased access hole for the neutron probe.An observation well needs a diameter only large enough for access by measuring devices and must be immediately responsive to changes in aquifer water level. For neutron probe use, the required diameter is about two inches, and the well must have no significant effect on moisture movement in the unsaturated zone. To meet these requirements the drilling process should have no lasting effect on the formation surrounding the well. Finally, since the wells have no economic utility, construction cost must be low.A network of observation wells and neutron probe access holes was drilled as part of a project to evaluate the natural recharge from Rillito Creek near Tucson, Arizona. The formation along the creek bed is a coarse alluvial outwash containing almost no clay, considerable running sand, and some large gravel and boulders. Commercial churn (percussion) and hydraulic rotary drills, commonly used for drilling in this area, were first tried but encountered much difficulty in the loose materials.Previous investigators used jetting equipment drill small diameter holes in a variety of alluvi formations (Cederstrom and Tibbitts, 1961; Bowma: 1911; and Pillsbury and Christiansen, 1947). Howeve in most cases, either open hole drilling was used because the fine material content and the limited numb. of boulders or large gravel particles made this methc possible, or drilling mud was used to maintain th hole. The jetting method uses water pumped unde pressure through hollow rods and a drill bit to loose the material and carry it to the surface. The jettin water receives little aid from the drill in loosenin the material to be removed. Usually the drill cutting are settled out in a tank or basin, and the water i recirculated.