ALBERT

Description: Deep-towed geophysical surveys require precise knowledge of navigational parameters such as instrument position and orientation because navigational uncertainties reflect in the data and therefore in the inferred geophysical properties of the subseafloor. We address this issue for the case of electrical conductivity inferred from controlled source electromagnetic data. We show that the data error is laterally variable due to irregular motion during deep towing, but also due to lateral variations in conductivity, including those resulting from topography. To address this variability and quantify the data error prior to inversion, we propose a 2-D perturbation study. Our workflow enables stable and geologically reliable results for multicomponent and multifrequency inversions. An error estimation workflow is presented, which comprises the assessment of navigational uncertainties, perturbation of navigational parameters, and forward modelling of electric field amplitudes for a homogeneous and then a heterogeneous subseafloor conductivity model. Some navigational uncertainties are estimated from variations of direct measurements. Other navigational parameters required for inversion are derived from the measured quantities and their error is calculated by means of error propagation. Some navigational parameters show direct correlation with the measured electric fields. For example, the antenna dip correlates with the vertical electric field and the depth correlates with the horizontal electric field. For the perturbation study each standard deviation is added to the navigational parameters. Forward models are run for each perturbation. Amplitude deviations are summed in quadrature with the stacking error for a total, laterally varying, data error. The error estimation is repeated for a heterogeneous subseafloor model due to the large conductivity range (several orders of magnitude), which affects the forward model. The approach enables us to utilize data from several components (multiple electric fields, frequencies and receivers) in the inversion to constrain the final model and reduce ambiguity. The final model is geologically reasonable, in this case enabling the identification of conductive metal sulphide deposits on the seafloor.

Description: Highlights • There is direct and indirect evidence for hydrate occurrence in several areas around Europe. • Hydrate is particularly widespread offshore Norway and Svalbard and in the Black Sea. • Hydrate occurrence often coincides with conventional thermogenic hydrocarbon provinces. • The regional abundance of hydrate in Europe is poorly known. Abstract Large national programs in the United States and several Asian countries have defined and characterised their marine methane hydrate occurrences in some detail, but European hydrate occurrence has received less attention. The European Union-funded project “Marine gas hydrate – an indigenous resource of natural gas for Europe” (MIGRATE) aimed to determine the European potential inventory of exploitable gas hydrate, to assess current technologies for their production, and to evaluate the associated risks. We present a synthesis of results from a MIGRATE working group that focused on the definition and assessment of hydrate in Europe. Our review includes the western and eastern margins of Greenland, the Barents Sea and onshore and offshore Svalbard, the Atlantic margin of Europe, extending south to the northwestern margin of Morocco, the Mediterranean Sea, the Sea of Marmara, and the western and southern margins of the Black Sea. We have not attempted to cover the high Arctic, the Russian, Ukrainian and Georgian sectors of the Black Sea, or overseas territories of European nations. Following a formalised process, we defined a range of indicators of hydrate presence based on geophysical, geochemical and geological data. Our study was framed by the constraint of the hydrate stability field in European seas. Direct hydrate indicators included sampling of hydrate; the presence of bottom simulating reflectors in seismic reflection profiles; gas seepage into the ocean; and chlorinity anomalies in sediment cores. Indirect indicators included geophysical survey evidence for seismic velocity and/or resistivity anomalies, seismic reflectivity anomalies or subsurface gas escape structures; various seabed features associated with gas escape, and the presence of an underlying conventional petroleum system. We used these indicators to develop a database of hydrate occurrence across Europe. We identified a series of regions where there is substantial evidence for hydrate occurrence (some areas offshore Greenland, offshore west Svalbard, the Barents Sea, the mid-Norwegian margin, the Gulf of Cadiz, parts of the eastern Mediterranean, the Sea of Marmara and the Black Sea) and regions where the evidence is more tenuous (other areas offshore Greenland and of the eastern Mediterranean, onshore Svalbard, offshore Ireland and offshore northwest Iberia). We provide an overview of the evidence for hydrate occurrence in each of these regions. We conclude that around Europe, areas with strong evidence for the presence of hydrate commonly coincide with conventional thermogenic hydrocarbon provinces.

Description: Fluid-escape structures within sedimentary basins permit pressure-driven focused fluid flow through inter-connected faults, fractures and sediment. Seismically-imaged chimneys are recognised as fluid migration pathways which cross-cut overburden stratigraphy, hydraulically connecting deeper strata with the seafloor. However, the geological processes in the sedimentary overburden which control the mechanisms of genesis and temporal evolution require improved understanding. We integrate high resolution 2D and 3D seismic reflection data with sediment core data to characterise a natural, active site of seafloor methane venting in the UK North Sea and Witch Ground Basin, the Scanner pockmark complex. A regional assessment of shallow gas distribution presents direct evidence of active and palaeo-fluid migration pathways which terminate at the seabed pockmarks. We show that these pockmarks are fed from a methane gas reservoir located at 70 metres below the seafloor. We find that the shallow reservoir is a glacial outwash fan, that is laterally sealed by glacial tunnel valleys. Overpressure generation leading to chimney and pockmark genesis is directly controlled by the shallow geological and glaciogenic setting. Once formed, pockmarks act as drainage cells for the underlying gas accumulations. Fluid flow occurs through gas chimneys, comprised of a sub-vertical gas-filled fracture zone. Our findings provide an improved understanding of focused fluid flow and pockmark formation within the sediment overburden, which can be applied to subsurface geohazard assessment and geological storage of CO2.

Description: High-resolution velocity models developed using full-waveform inversion (FWI) can image fine details of the nature and structure of the subsurface. Using a 3D FWI velocity model of hyper-thinned crust at the Deep Galicia Margin (DGM) west of Iberia, we constrain the nature of the crust at this margin by comparing its velocity structure with those in other similar tectonic settings. Velocities representative of both the upper and lower continental crust are present, but there is no clear evidence for distinct upper and lower crustal layers within the hyper-thinned crust. Our velocity model supports exhumation of the lower crust under the footwalls of fault blocks to accommodate the extension. We used our model to generate a serpentinization map for the uppermost mantle at the DGM, at a depth of 100 ms (∼340 m) below the S-reflector, a low-angle detachment that marks the base of the crust at this margin. We find a good alignment between serpentinized areas and the overlying major block bounding faults on our map, suggesting that those faults played an important role in transporting water to the upper mantle. Further, we observe a weak correlation between fault heaves and serpentinization beneath the hanging-wall blocks, indicating that serpentinization was controlled by complex faulting during rifting. A good match between topographic highs of the S and local highly serpentinized areas of the mantle suggests that the morphology of the S was affected by the volume-increasing process of serpentinization and deformation of the overlying crust. Key Points Exhumation of the lower crust under the footwall of the normal faults to accommodate extension Overlying faults in the crust control water transport to the mantle Topography of the S-reflector is affected by the serpentinization process and deformations of the overlying crust

Description: Highlights • An unprecedented detailed tectono-thermal history of a magma-poor margin is revealed. • Deformation mechanisms laterally vary across active faults during extreme extension. • Mantle hydration occurs through brittle deformation in the footwalls of active faults. • Detachments form through ductile shearing in the hangingwalls of active faults. • Detachment formation is a byproduct but not a root cause of margin asymmetry. Abstract A long-standing problem in solid Earth science is to understand how low-angle normal faults form, their role in the development of tectonic asymmetry of conjugate margins, and how they relate to mantle hydration during continental breakup. The latter requires water to reach the mantle through active brittle faults, but low angle slip on faults is mechanically difficult. Here, we incorporate observations from high-resolution multichannel seismic data along the West Iberia-Newfoundland margins into a 2D forward thermo-mechanical model to understand the relationship between evolving rift asymmetry, detachment tectonics, and mantle hydration. We show that, during extreme extension, slip on active faults bifurcates at depth into brittle and ductile deformation branches, as a result of the cooling of the faults' footwall and heating of their hangingwall. The brittle deformation penetrates the Moho and leads to mantle hydration, while ductile deformation occurs in localized shear zones and leads to the formation of detachment-like structures in the distal margin sections. Such structures, as for example ‘S’ in the West Iberia-Newfoundland margins, are thus composed of several shear zones, active at low-angles, ∼25°-20°, and merging with the Moho at depth. The final sub-horizontal geometry of these structures is the result of subsequent back-rotation of these shear zones by new oceanward faults. Our results reproduce remarkably well the final sedimentary, fault, crustal architecture, and serpentinisation pattern observed at the West Iberia-Newfoundland margins. However, they challenge widely accepted ideas that such detachment-like structures formed by brittle processes, separate crust from mantle and caused conjugate margin asymmetry. Our model provides a quantitative framework to study hydrothermal systems related to serpentinization during extreme extension, their associated hydrogen, methane production, and the chemosynthetic life they sustain.