ALBERT

Description: Metamorphic and deformed rocks in thrust zones show particularly high seismic anisotropy causing challenges for seismic imaging and interpretation. A good example is the Seve Nappe Complex in central Sweden, an old exhumed orogenic thrust zone that is characterized by a strong but incoherent seismic reflectivity and considerable seismic anisotropy. However, only little is known about their origin in relation to composition and structural influences on measurements at different seismic scales. Here, we present a new integrative study of cross‐scale seismic anisotropy analyses combining mineralogical composition, microstructural analyses and seismic laboratory experiments from the COSC‐1 borehole, which sampled a 2.5 km‐deep section of metamorphic rocks deformed in an orogenic root now preserved in the Lower Seve Nappe. While there is strong crystallographic preferred orientation in most samples in general, variations in anisotropy depend mostly on bulk mineral composition and dominant core lithology as shown by a strong correlation between these. This relationship enables to identify three distinct seismic anisotropy facies providing a continuous anisotropy profile along the borehole. Moreover, comparison of laboratory seismic measurements and electron‐backscatter diffraction data reveals a strong scale‐dependence, which is more pronounced in the highly deformed, heterogeneous samples. This highlights the need for comprehensive cross‐validation of microscale anisotropy analyses with additional lithological data when integrating seismic anisotropy over seismic scales.

Description: Focused fluid flow shapes the evolution of marine sedimentary basins by transferring fluids and pressure across geological formations. Vertical fluid conduits may form where localized overpressure breaches a cap rock (permeability barrier) and thereby transports overpressured fluids towards shallower reservoirs or the surface. Field outcrops of an Eocene fluid flow system at Pobiti Kamani and Beloslav Quarry (ca 15 km west of Varna, Bulgaria) reveal large carbonate‐cemented conduits, which formed in highly permeable, unconsolidated, marine sands of the northern Tethys Margin. An uncrewed aerial vehicle with an RGB sensor camera produces ortho‐rectified image mosaics, digital elevation models and point clouds of the two kilometre‐scale outcrop areas. Based on these data, geological field observations and petrological analysis of rock/core samples; fractures and vertical fluid conduits were mapped and analyzed with centimetre accuracy. The results show that both outcrops comprise several hundred carbonate‐cemented fluid conduits (pipes), oriented perpendicular to bedding, and at least seven bedding‐parallel calcite cemented interbeds which differ from the hosting sand formation only by their increased amount of cementation. The observations show that carbonate precipitation likely initiated around areas of focused fluid flow, where methane entered the formation from the underlying fractured subsurface. These first carbonates formed the outer walls of the pipes and continued to grow inward, leading to self‐sustaining and self‐reinforcing focused fluid flow. The results, supported by literature‐based carbon and oxygen isotope analyses of the carbonates, indicate that ambient seawater and advected fresh/brackish water were involved in the carbonate precipitation by microbial methane oxidation. Similar structures may also form in modern settings where focused fluid flow advects fluids into overlying sand‐dominated formations, which has wide implications for the understanding of how focusing of fluids works in sedimentary basins with broad consequences for the migration of water, oil and gas.

Description: We present the results of P-to-S receiver function analysis to improve the 3D image of the sedimentary layer, the upper crust, and lower crust in the Pannonian Basin area. The Pannonian Basin hosts deep sedimentary depocentres superimposed on a complex basement structure and it is surrounded by mountain belts. We processed waveforms from 221 three-component broadband seismological stations. As a result of the dense station coverage, we were able to achieve so far unprecedented spatial resolution in determining the velocity structure of the crust. We applied a three-fold quality control process; the first two being applied to the observed waveforms and the third to the calculated radial receiver functions. This work is the first comprehensive receiver function study of the entire region. To prepare the inversions, we performed station-wise H-Vp/Vs grid search, as well as Common Conversion Point migration. Our main focus was then the S-wave velocity structure of the area, which we determined by the Neighborhood Algorithm inversion method at each station, where data were sub-divided into back-azimuthal bundles based on similar Ps delay times. The 1D, nonlinear inversions provided the depth of the discontinuities, shear-wave velocities and Vp/Vs ratios of each layer per bundle, and we calculated uncertainty values for each of these parameters. We then developed a 3D interpolation method based on natural neighbor interpolation to obtain the 3D crustal structure from the local inversion results. We present the sedimentary thickness map, the first Conrad depth map and an improved, detailed Moho map, as well as the first upper and lower crustal thickness maps obtained from receiver function analysis. The velocity jump across the Conrad discontinuity is estimated at less than 0.2 km/s over most of the investigated area. We also compare the new Moho map from our approach to simple grid search results and prior knowledge from other techniques. Our Moho depth map presents local variations in the investigated area: the crust-mantle boundary is at 20–26 km beneath the sedimentary basins, while it is situated deeper below the Apuseni Mountains, Transdanubian and North Hungarian Ranges (28–33 km), and it is the deepest beneath the Eastern Alps and the Southern Carpathians (40–45 km). These values reflect well the Neogene evolution of the region, such as crustal thinning of the Pannonian Basin and orogenic thickening in the neighboring mountain belts.

Description: Submarine landslides can be several orders of magnitude larger than their terrestrial counterparts and can pose significant hazards across entire ocean basins. The landslide failure mechanism strongly controls the associated tsunami hazard. The Tampen Slide offshore Norway is one of the largest landslides on Earth but remains poorly understood due to its subsequent burial beneath up to 450 m of sediments. Here, we use laterally extensive (16,000 km2), high‐resolution processed 3D seismic reflection data to characterize the upper Tampen Slide. We identify longitudinal (downslope, movement‐parallel) chutes and ridges that are up‐to‐40 m high, as well as extensional and compressional (cross‐slope) ridges. This is the first time that longitudinal ridges of such size have been imaged in a deep marine setting. The first phase of the Tampen Slide involved the simultaneous translation of over 720 km3 of sediments along a single failure plane. This was followed by spreading along the head‐ and sidewall, and the formation of a retrogressive debris flow and slump, the volumes of which are insignificant compared to the first failure. The process responsible for movement of such a large sediment volume along a single glide plane differs significantly from that of other passive margin megaslides, which typically comprise numerous smaller landslides that fail retrogressively along multiple glide planes. The trigger mechanism (e.g. an earthquake), the presence of mechanically strong obstructions (e.g. igneous topographical high), and the number and location of weak layers may be key factors that determine whether megaslides develop along a single plane or retrogressively.

Description: Continental collision causes deformation in the crust along shear zones. However, the physical and chemical conditions at which these zones operate and the deformation processes that enable up to hundreds of km of tectonic transport are still unclear because of the depth at which they occur and the challenges in imaging them. Ancient exhumed collision zones allow us to investigate these processes much better, for example at the COSC‐1 borehole in the central Scandinavian Caledonides. This study combines data from the COSC‐1 borehole with different seismic measurements to provide constraints on the spatial lithological and textural configuration of the Seve Nappe Complex. This is one of the few studies that shows that core‐log‐seismic integration in metamorphic rocks allows to identify the spatial distribution of major lithological units. Especially gamma ray logs in combination with density data are powerful tools to distinguish between mafic and felsic lithologies in log‐core correlation. Our results indicate that reflections along the borehole are primarily caused by compositional rather than textural changes. Reflections in the Seve Nappe Complex are not as distinct as in greater depths but continuous and several of them can be linked to magmatic intrusions, which have been metamorphically overprinted. Their setting indicates that the Seve Nappe Complex consists of the remnants of a volcanic continental margin. Our results suggest that ductile‐deformed middle crustal reflectivity is primarily a function of pre‐orogenic lithological variations which has to be considered when deciphering mountain building processes.

Description: Deep-seabed polymetallic nodule mining can have multiple adverse effects on benthic communities, such as permanent loss of habitat by removal of nodules and habitat modification of sediments. One tool to manage biodiversity risks is the mitigation hierarchy, including avoidance, minimization of impacts, rehabilitation and/or restoration, and offset. We initiated long-term restoration experiments at sites in polymetallic nodule exploration contract areas in the Clarion-Clipperton Zone that were (i) cleared of nodules by a preprototype mining vehicle, (ii) disturbed by dredge or sledge, (iii) undisturbed, and (iv) naturally devoid of nodules. To accommodate for habitat loss, we deployed 〉2000 artificial ceramic nodules to study the possible effect of substrate provision on the recovery of biota and its impact on sediment biogeochemistry. Seventy-five nodules were recovered after eight weeks and had not been colonized by any sessile epifauna. All other nodules will remain on the seafloor for several years before recovery. Furthermore, to account for habitat modification of the top sediment layer, sediment in an epibenthic sledge track was loosened by a metal rake to test the feasibility of sediment decompaction to facilitate soft-sediment recovery. Analyses of granulometry and nutrients one month after sediment decompaction revealed that sand fractions are proportionally lower within the decompacted samples, whereas total organic carbon values are higher. Considering the slow natural recovery rates of deep-sea communities, these experiments represent the beginning of a ~30-year study during which we expect to gain insights into the nature and timing of the development of hard-substrate communities and the influence of nodules on the recovery of disturbed sediment communities. Results will help us understand adverse long-term effects of nodule removal, providing an evidence base for setting criteria for the definition of “serious harm” to the environment. Furthermore, accompanying research is needed to define a robust ecosystem baseline in order to effectively identify restoration success.

Description: Marine protected areas (MPAs) are a well‐established conservation practice worldwide, but their effectiveness in protecting or replenishing fish biodiversity remains uneven. Understanding the patterns of this heterogeneity is central to general guidelines for MPA design and can ultimately provide guidance on how to maximize MPA potential. Here, we examine associations between the degree of protection, duration of protection, and protected area size, with fish biodiversity inside of protected areas relative to that of sites nearby, but outside of protected areas. We quantitatively synthesize 116 published estimates of species richness from 72 MPAs and 38 estimates of Shannon entropy from 21 MPAs. We show that species richness is on average 18% (95% CIs: 10%–29%) higher in protected areas than in areas open to fishing; on average, Shannon entropy is 13% (95% CIs: −2% to 31%) higher within protected areas relative to outside. We find no relationship between the degree and duration of protection with the ratio of species richness inside versus outside of protected areas; both fully and partially protected areas contribute to the accumulation of species inside of protected areas, and protected areas of all ages contribute similarly on average to biodiversity conservation. In contrast to our expectations, increasing protected area size was associated with a decreased ratio of species richness sampled at sites inside versus outside of the protected area, possibly due, for example, to insufficient enforcement and/or low compliance. Finally, we discuss why meta‐analyses such as ours that summarize effect sizes of local scale biodiversity responses, that is, those at a single site, can only give a partial answer to the question of whether larger protected areas harbor more species than comparable unprotected areas.

Description: Mixed turbidite–contourite depositional systems result from interactions between down‐slope turbidity currents and along‐slope bottom currents, comprising excellent records of past oceanographic currents. Modern and ancient systems have been widely documented along the continental margins of the Atlantic Ocean. Yet, few examples have so far been identified on the North‐west African continental margin, limiting understanding of the sedimentary and palaeoceanographic evolution in this area. This work uses two‐dimensional seismic reflection profiles to report, for the first time, the presence of three giant sediment mounds beneath the headwall region of the Sahara Slide Complex. The sediment mounds are elongated and separated by two broad canyons, showing a north‐west/south‐east orientation that is roughly perpendicular to the continental margin. These mounds are 24 to 37 km long and 12 to 17 km wide, reaching a maximum height of ca 1000 m. Numerous slide scarps are observed within and along the flanks of the mounds, hinting at the occurrence of submarine landslides during their development. Based on their geometries, external shapes, internal seismic architecture and stratigraphic stacking patterns, it is proposed that these sediment mounds comprise down‐slope elongated mounded drifts formed in a mixed turbidite–contourite system during four evolutionary stages: onset, growth, maintenance and burial. The significance of this work is that it demonstrates the gradual transition from a turbidite system to a full mixed turbidite–contourite system to be associated, in the study area, with the establishment of strong ocean currents along north‐west Africa.

Description: The Black Sea is a permanently anoxic, marine basin serving as model system for the deposition of organic-rich sediments in a highly stratified ocean. In such systems, archaeal lipids are widely used as paleoceanographic and biogeochemical proxies; however, the diverse planktonic and benthic sources as well as their potentially distinct diagenetic fate may complicate their application. To track the flux of archaeal lipids and to constrain their sources and turnover, we quantitatively examined the distributions and stable carbon isotopic compositions (delta 13C) of intact polar lipids (IPLs) and core lipids (CLs) from the upper oxic water column into the underlying sediments, reaching deposits from the last glacial. The distribution of IPLs responded more sensitively to the geochemical zonation than the CLs, with the latter being governed by the deposition from the chemocline. The isotopic composition of archaeal lipids indicates CLs and IPLs in the deep anoxic water column have negligible influence on the sedimentary pool. Archaeol substitutes tetraether lipids as the most abundant IPL in the deep anoxic water column and the lacustrine methanic zone. Its elevated IPL/CL ratios and negative delta 13C values indicate active methane metabolism. Sedimentary CL- and IPL-crenarchaeol were exclusively derived from the water column, as indicated by non-variable delta 13C values that are identical to those in the chemocline and by the low BIT (branched isoprenoid tetraether index). By contrast, in situ production accounts on average for 22% of the sedimentary IPL-GDGT-0 (glycerol dibiphytanyl glycerol tetraether) based on isotopic mass balance using the fermentation product lactate as an endmember for the dissolved substrate pool. Despite the structural similarity, glycosidic crenarchaeol appears to be more recalcitrant in comparison to its non-cycloalkylated counterpart GDGT-0, as indicated by its consistently higher IPL/CL ratio in sediments. The higher TEX86, CCaT, and GDGT-2/-3 values in glacial sediments could plausibly result from selective turnover of archaeal lipids and/or an archaeal ecology shift during the transition from the glacial lacustrine to the Holocene marine setting. Our in-depth molecular-isotopic examination of archaeal core and intact polar lipids provided new constraints on the sources and fate of archaeal lipids and their applicability in paleoceanographic and biogeochemical studies.