ALBERT

Description: The Zinkgruvan mining area is located on the south-eastern part of the Bergslagen district, one of the three major mineral producing regions in Sweden. In this study, we present the results from three (P1, P2 and P8) reflection seismic profiles each approximately 3000 m-long crossing the Zinkgruvan Zn-Pb-Ag-(Cu) mining area. P1 was acquired using cabled geophones with 10 m receiver and source interval and crossed major geological features. The other two profiles (P2 and P8) were acquired by wireless recorders with 20 m receiver and 10 m source interval and ran perpendicular to P1. Through a special data processing workflow adapted to this dataset, good quality seismic sections were obtained along these profiles, although a high noise level due to high voltage electric power lines was present. The interpretations were constrained by (1) seismic P-wave velocity and density data from a series of downhole logging measurements, (2) 3D forward reflection traveltime modelling in both pre- and post-stack domains, and (3) other geophysical and geological observations available from the site. Despite the notably complex geology, the processed seismic sections clearly reveal a series of horizontal to gently dipping reflections associated with known geological formations. Results indicate that most structures and lithological contacts dip or plunge to the northeast, including the targeted Zinkgruvan Formation. The results from this seismic survey are encouraging regarding the potential of the seismic method for base-metal exploration in Sweden and in particular in the Bergslagen district. It shows the high resolving power of the reflection seismic methods for imaging complex geological structures in a cost-effective and environmentally-friendly way.

Description: The Alpine Fault zone in New Zealand marks a major transpressional plate boundary that is late in its typical earthquake cycle. Understanding the subsurface structures is crucial to understand the tectonic processes taking place. A unique seismic survey including 2D lines, a 3D array, and borehole recordings, has been performed in the Whataroa Valley and provides new insights into the Alpine Fault zone down to ∼2 km depth at the location of the Deep Fault Drilling Project (DFDP)-2 drill site. Seismic images are obtained by focusing prestack depth migration approaches. Despite the challenging conditions for seismic imaging within a sediment filled glacial valley and steeply dipping valley flanks, several structures related to the valley itself as well as the tectonic fault system are imaged. A set of several reflectors dipping 40°–56° to the southeast are identified in a ∼600 m wide zone that is interpreted to be the minimum extent of the damage zone. Different approaches image one distinct reflector dipping at ∼40°, which is interpreted to be the main Alpine Fault reflector located only ∼100 m beneath the maximum drilled depth of the DFDP-2B borehole. At shallower depths (z 〈 0.5 km), additional reflectors are identified as fault segments with generally steeper dips up to 56°. Additionally, a glacially over-deepened trough with nearly horizontally layered sediments and a major fault (z 〈 0.5 km) are identified 0.5–1 km south of the DFDP-2B borehole. Thus, a complex structural environment is seismically imaged and shows the complexity of the Alpine Fault at Whataroa.