ISSN:
1551-2916
Quelle:
Blackwell Publishing Journal Backfiles 1879-2005
Thema:
Maschinenbau
,
Physik
Notizen:
The reaction-bonded aluminum oxide (RBAO) process utilizes the oxidation of intensely milled aluminum/alumina powder compacts that are heat treated in air to make alumina-based ceramics. RBAO samples are typically oxidized in a furnace which is heated at 1°C/min to 1100°C. Heat-treating samples with a characteristic dimension 〉1 mm, without adjusting the furnace temperature program, usually results in a cracked ceramic. Cracking is caused by the excessive thermal and chemical stresses that result from steep temperature gradients (〉30°C/mm) and compositional gradients (〉5000 mol·(m3·mm)−1), which develop under the deleterious ignition and shrinking core reaction regimes. While adjustments to the furnace temperature program based on continuum models have had some success, the use of feedback-controlled firing is investigated as a means to avoid the furnace temperature program design step and to decrease the firing time. Feedback-controlled firing is shown to improve yields and significantly reduce the time required to completely oxidize the aluminum. For example, a 16 g sample with a characteristic dimension of 7.56 mm, which previously took 〉100 h to oxidize completely, was successfully oxidized crack free in 18.3 h using feedback control. Using the typical heat-treatment cycle, a 1 mm sample was fired in 18 h. With feedback-controlled firing, the same sized sample was fired in only 5 h.
Materialart:
Digitale Medien
URL:
http://dx.doi.org/10.1111/j.1551-2916.2005.00639.x
Permalink
