ISSN:
0947-5117
Keywords:
Chemistry
;
Polymer and Materials Science
Source:
Wiley InterScience Backfile Collection 1832-2000
Topics:
Mechanical Engineering, Materials Science, Production Engineering, Mining and Metallurgy, Traffic Engineering, Precision Mechanics
Description / Table of Contents:
Investigations into the behaviour of aluminium under cathodic polarizationCharacteristic discontinuities in the cathodic current density-potential curve (traced for high purity Al and Fe-containing Al in buffered Na-chloride solution), relations between the current density and the inflexion point of the curve and the buffer capacity of the electrolyte, as well as the heavy corrosion observed above a critical current density yield the conclusion that a cathodic rupture occurs because of the alkaline reaction of the liquid boundary layer. The cathodic reaction is thereby transferred from the oxide-solution boundary to the metal-solution boundary and the formation of hydroxide takes place not by direct hydration, but via hydroxo complexes which are precipitated at the electrode because of the pH prevailing there and then block the electrode. In the case of the Fe-containing Al there is an enrichment of Al3Fe which results in increasing hydrogen evolution at constant potential.
Notes:
Charakteristische Unstetigkeiten in der kathodischen Stromdichte-Potential-Kurve (aufgenommen für Reinst-Al und Fe-haltiges Al in gepufferter Nu-Chloridlosung), Zusammenhänge zwischen der Stromdichte am Knickpunkt der Kurve und der Pufferkapazität des Elektrolyten sowie die starke Korrosion oberhalb einer kritischen Stromdichte führen zu dem Schluß, daß es infolge alkalischer Reaktion der Flüssigkeitsgrenzschicht zu einem kathodischen Durchbruch kommt. Die kathodische Reaktion verlagert sich dabei von der Grenze Oxid/Lösung zur Grenze Metall/Lösung, wobei die Hydraxidbildung nicht durch direkte Hydratisierung, sondern über Hydroxokomplexe erfolgt, die infolge der dort herrschenden pH-Werte vor der Elektrode ausgefällt werden und diese dann blockieren. Im Falle des Fe-haltigen Al kommt es zu einer Anreicherung von Al3Fe, was zu einer Steigerung der Wasserstoffentwicklung bei konstantem Potential führt.
Additional Material:
2 Ill.
Type of Medium:
Electronic Resource
URL:
http://dx.doi.org/10.1002/maco.19730240207
Permalink