ISSN:
0003-3146
Keywords:
Chemistry
;
Polymer and Materials Science
Source:
Wiley InterScience Backfile Collection 1832-2000
Topics:
Chemistry and Pharmacology
,
Physics
Description / Table of Contents:
The post-crosslinking of chloromethylated poly(styrene-co-divinylbenzene) to highly crosslinked, porous adsorbent polymers has been studied over a wide range of reaction temperature (50-80°C) and reaction time (up to 24.5 h). The crosslinked materials were characterized by nitrogen adsorption/desorption, mercury porosimetry, determination of the chlorine content, swelling measurements, pyrolysis gas chromatography, and Fourier transform infrared spectroscopy.Surface area, pore size distribution, pore volume, chlorine content, swelling degree, selected peak ratios in the pyrograms and in the FTIR spectrograms are shown to be clear functions of the post-crosslinking time. Therefore the post-crosslinking process can be monitored by physical as well as by chemical characterization methods.Moreover, information on the chemical homogeneity or inhomogeneity of the chloromethylated copolymers and the porous adsorbent polymers can be derived from the swelling and pyrolysis gas chromatographic results. Application of different solvents in the swelling experiments enables the construction of swelling diagrams. Based on these swelling diagrams, the anomalous swelling behaviour of adsorbent polymers during the post-crosslinking can be explained.The surface area and pore volume strongly increase with progressing post-crosslinking, and well-defined correlations between sample texture, pyrolysis and FTIR data are found. In general, changes of physical properties can be attributed to the chemical modification of the material due to the post-crosslinking.
Notes:
Die Nachvernetzung von chlormethyliertem Poly(styrol-co-divinylbenzol) zu hochvernetzten porösen Adsorberpolymeren wurde über einen weiten Temperatur-(50-80°C) und Reaktionszeitbereich (bis zu 24,5 h) untersucht. Die vernetzten Materialien wurden durch Stickstoffadsorption/Desorption, Quecksilberporosimetrie, Bestimmung des Chlorgehalts, Quellungsmessungen, Pyrolyse-Gaschromatographie und Fourier-Transform-Infrarotspektroskopie charakterisiert.Die Oberfläche, die Porengrößenverteilung, das Porenvolumen, der Chlorgehalt, ausgewählte Peakverhältnisse in den Pyrogrammen und den FTIR-Spektrogrammen sind eindeutige Funktionen der Nachvernetzungszeit. Der Nachvernetzungsprozeß kann somit sowohl mit physikalischen als auch mit chemischen Charakterisierungsmethoden verfolgt werden. Darüber hinaus ermöglichen Quellungsmessungen und pyrolysegaschromatographische Untersuchungen Aussagen zur Homogenität und Inhomogenität der chlormethylierten Copolymeren und porösen Adsorberpolymeren.Der Einsatz verschiedener Lösungsmittel bei der Quellung erlaubt die Konstruktion von Quellungsdiagrammen, anhand derer das anomale Quellungsverhalten der Adsorberpolymeren während der Nachvernetzung erklärt werden kann.Im Verlauf der Nachvernetzung werden die Oberfläche und das Porenvolumen stark vergrößert und eindeutige Korrelationen zwischen der Probentextur und den Pyrolyse- und FTIR-Daten gefunden. Die Veränderung der physikalischen Eigenschaften im Verlauf der Vernetzung kann generell auf die chemische Modifikation des Materials zurückgeführt werden.
Additional Material:
14 Ill.
Type of Medium:
Electronic Resource
URL:
http://dx.doi.org/10.1002/apmc.1997.052460111
Permalink