ALBERT

Description: Results of aerothermal material response calculations for the 5th Ablation Workshop Ablation Test-Case Series 2.

Description: This presentation gives examples of NASA capability in using commercial tools to solve real world problems in a variety of industries.

Description: AFRC (Armstrong Flight Research Center) has a long history, and a lot of lessons learned, in testing hypersonic structures. This poster describes hypersonic structures, how to test them, and the methods used to develop the testing.

Description: The paper looks at the radiant heat exchange between some fairly primitive geometry components, and a few more complex, to understand the radiant energy distribution under a very common radiant lamp consisting of 6 quartz tube (tungsten element) heaters. This is looking at the basic physics of a common device used around the world for many decades. Other papers have looked at this same topic, but ours is looking at other topics we have not seen addressed in the literature (that explain why it is what it is, and other things affecting data interpretation).

Description: Non-pyrolyzingcarbonaceous materials represent a class of candidate material for hypersonic vehicle components providing both structural and thermal protection system capabilities. Two problems relevant to this technology are presented. The first considers the one-dimensional ablation of a carbon material subject to convective heating. The second considers two-dimensional conduction in a rectangular block subject to radiative heating. Surface thermochemistry for both problems includes finite-rate surface kinetics at low temperatures, diffusion limited ablation at intermediate temperatures, and vaporization at high temperatures. The first problem requires the solution of both the steady-state thermal profile with respect to the ablating surface and the transient thermal history for a one-dimensional ablating planar slab with temperature-dependent material properties. The slab front face is convectively heated and also reradiates to a room temperature environment. The back face is adiabatic. The steady-state temperature profile and steady-state mass loss rate should be predicted. Time-dependent front and back face temperature, surface recession and recession rate along with the final temperature profile should be predicted for the time-dependent solution. The second problem requires the solution for the transient temperature history for an ablating, two-dimensional rectangular solid with anisotropic, temperature-dependent thermal properties. The front face is radiatively heated, convectively cooled, and also reradiates to a room temperature environment. The back face and sidewalls are adiabatic. The solution should include the following 9 items: final surface recession profile, time-dependent temperature history of both the front face and back face at both the centerline and sidewall, as well as the time-dependent surface recession and recession rate on the front face at both the centerline and sidewall. The results of the problems from all submitters will be collected, summarized, and presented at a later conference.

Description: The harsh and complex hypersonic flight environment has driven design and analysis improvements for many years. One of the defining characteristics of hypersonic flight is the coupled, multi-disciplinary nature of the dominant physics. In an effect to examine some of the multi-disciplinary problems associated with hypersonic flight engineers at the NASA Dryden Flight Research Center developed a non-linear 6 degrees-of-freedom, full vehicle simulation that includes the necessary model capabilities: aerothermal heating, ablation, and thermal stress solutions. Development of the tool and results for some investigations will be presented. Requirements and improvements for future work will also be reviewed. The results of the work emphasize the need for a coupled, multi-disciplinary analysis to provide accurate

Description: This presentation utilizes generic test conditions and material properties for a conceptual material to demonstrate the process.

Description: Program Objectives: I. Assess stability & control characteristics of a BWB class vehicle in free-flight conditions: a) Assess dynamic interaction of control surfaces; b) Assess control requirements to accommodate asymmetric thrust; and c) Assess stability and controllability about each axis at a range of flight conditions. II. Assess flight control algorithms designed to provide desired flight characteristics: a) Assess control surface allocation and blending; b) Assess edge of envelope protection schemes; c) Assess takeoff and landing characteristics; and d) Test experimental control laws and control design methods III. Evaluate prediction and test methods for BWB class vehicles: a) Correlate flight measurements with ground-based predictions and measurements.

Description: Program Objectives; I. Assess stability & control characteristics of a BWB class vehicle in free-flight conditions: a) Assess dynamic interaction of control surfaces; b) Assess control requirements to accommodate asymmetric thrust; c) Assess stability and controllability about each axis at a range of flight conditions II. Assess flight control algorithms designed to provide desired flight characteristics: a) Assess control surface allocation and blending; b) Assess edge of envelope protection schemes; c) Assess takeoff and landing characteristics; d) Test experimental control laws and control design methods. III. Evaluate prediction and test methods for BWB class vehicles: a) Correlate flight measurements with ground-based predictions and measurements.