ISSN:
1618-2650
Keywords:
Best. von Bor in Silicaten
;
Spektralphotometrie
;
Pyrohydrolyse, Carminsäure
Source:
Springer Online Journal Archives 1860-2000
Topics:
Chemistry and Pharmacology
Description / Table of Contents:
Summary This simple method for the determination of boron takes a total time of 20 min. Samples are mixed with CaF2 suprapur in the ratio 3∶1 and pyrohydrolized in a Leco induction furnace for 15 min under steam of H2O. The BF3 liberated is collected in a NaOH-Na2CO3 solution (10 g NaOH +1 g Na2CO3 per liter). This solution is filled up to 200 ml with twice distilled water; 2 ml of this solution is mixed with conc. sulphuric acid and carminic acid solution and filled up to 50 ml. The absorption is measured by a Zeiss Elko II photometer with filter S 59. Analyses of four internations reference samples show excellent precision with a relative standard deviation of less than 5% (e.g. for a boron content of 2.1 ppm in granite G-2).
Notes:
Zusammenfassung Die Borbestimmung mit dieser schnellen und einfachen Methode benötigt ca. 20 min. Die Proben werden mit CaF2 Suprapur im Verhältnis 3∶1 vermischt und in einem Leco-Induktionsofen 15 min unter Einleitung von Wasserdampf pyrohydrolysiert. Das entstandene BF3 wird in einer NaOH-Na2CO3-Lösung(10 g NaOH+1 gNa2CO3pro Liter) aufgefangen. Diese Lösung wird mit zweifach destilliertem Wasser auf 200 ml aufgefüllt; 2 ml dieser Lösung werden mit konz. Schwefelsäure und Carminsäure-Lösung versetzt und auf 50 ml aufgefüllt, bevor ihre Absorption mit einem Zeiss — Elko II — Photometer mit Filter S 59 gemessen wird. Analysen von 4 internationalen Referenzproben zeigen eine hohe Präzision mit einer relativen Standardabweichung von weniger als 5% (z. B. für einen Gehalt von 2,1 ppm Bor im Granit G-2 des USGS).
Type of Medium:
Electronic Resource
URL:
http://dx.doi.org/10.1007/BF00479979
Permalink