ISSN:
1573-482X
Source:
Springer Online Journal Archives 1860-2000
Topics:
Electrical Engineering, Measurement and Control Technology
,
Mechanical Engineering, Materials Science, Production Engineering, Mining and Metallurgy, Traffic Engineering, Precision Mechanics
Notes:
Abstract Bulk superconducting YBa2Cu3O7−x powder has been synthesized by a solution technique using a mixture of Ba-ethylenediaminetetra-acetic acid (EDTA) and [Y, Cu]-citric acid complexes. A light-blue, molecular-level, homogeneously mixed precursor was prepared, and transferred to powder form through vacuum drying. The vacuum-dried powder was decomposed at 800 °C for 4 h under flowing oxygen, then heat treated at high temperature from 850 to 950 °C for 6–12 h. The results ofT c measurements and X-ray analysis show that the orthorhombic, superconducting phase can be formed at temperatures above 850 °C following low-temperature annealing. A sharp transition (ΔT≃2 K) and high density can be achieved after 930 °C heat treatment. The 930 °C heat treated sample shows aJ c value of 510 A cm−2. It is concluded that this solution technique provides better stoichiometric control and lower reaction temperature than the conventional solid-state sintering process.
Type of Medium:
Electronic Resource
URL:
http://dx.doi.org/10.1007/BF00695518
Permalink