ALBERT

Description: Manganese (Mn) is a required element for oceanic phytoplankton as it plays a critical role in photosynthesis, through its unique redox chemistry, as the active site in photosystem II and in enzymes that act as defences against reactive oxygen species (ROS), most notably for protection against superoxide (O2-), through the action of superoxide dismutase (SOD), and against hydrogen peroxide (H2O2) via peroxidases and catalases. The distribution and redox speciation of Mn in the ocean is also apparently controlled by reactions with ROS. Here we examine the connections between ROS and dissolved Mn species in the upper ocean using field and laboratory experimental data. Our results suggest it is unlikely that significant concentrations of Mn(III) are produced in the euphotic zone, as in the absence of evidence for the existence of strong Mn(III) ligands, Mn(II) reacts with O2- to form the short lived transient manganous superoxide, MnO2+, which may react rapidly with other redox species in a similar manner to O2-. Experiments with the strong Mn(III) chelator, desferrioxamine B (DFB), in seawater indicated that the Mn(III) species is unlikely to form, as the pre-cursor Mn(II) complex under natural ambient conditions due to the high side reaction of DFB with Ca.

Description: Abstract The {GEOTRACES} Intermediate Data Product 2014 (IDP2014) is the first publicly available data product of the international {GEOTRACES} programme, and contains data measured and quality controlled before the end of 2013. It consists of two parts: (1) a compilation of digital data for more than 200 trace elements and isotopes (TEIs) as well as classical hydrographic parameters, and (2) the eGEOTRACES Electronic Atlas providing a strongly inter-linked on-line atlas including more than 300 section plots and 90 animated 3D scenes. The {IDP2014} covers the Atlantic, Arctic, and Indian oceans, exhibiting highest data density in the Atlantic. The {TEI} data in the {IDP2014} are quality controlled by careful assessment of intercalibration results and multi-laboratory data comparisons at cross-over stations. The digital data are provided in several formats, including {ASCII} spreadsheet, Excel spreadsheet, netCDF, and Ocean Data View collection. In addition to the actual data values the {IDP2014} also contains data quality flags and 1-� data error values where available. Quality flags and error values are useful for data filtering. Metadata about data originators, analytical methods and original publications related to the data are linked to the data in an easily accessible way. The eGEOTRACES Electronic Atlas is the visual representation of the {IDP2014} data providing section plots and a new kind of animated 3D scenes. The basin-wide 3D scenes allow for viewing of data from many cruises at the same time, thereby providing quick overviews of large-scale tracer distributions. In addition, the 3D scenes provide geographical and bathymetric context that is crucial for the interpretation and assessment of observed tracer plumes, as well as for making inferences about controlling processes.

Description: © The Author(s), 2018. This article is distributed under the terms of the Creative Commons Attribution License. The definitive version was published in Chemical Geology 493 (2018): 210-223, doi:10.1016/j.chemgeo.2018.05.040.

Description: The GEOTRACES Intermediate Data Product 2017 (IDP2017) is the second publicly available data product of the international GEOTRACES programme, and contains data measured and quality controlled before the end of 2016. The IDP2017 includes data from the Atlantic, Pacific, Arctic, Southern and Indian oceans, with about twice the data volume of the previous IDP2014. For the first time, the IDP2017 contains data for a large suite of biogeochemical parameters as well as aerosol and rain data characterising atmospheric trace element and isotope (TEI) sources. The TEI data in the IDP2017 are quality controlled by careful assessment of intercalibration results and multi-laboratory data comparisons at crossover stations. The IDP2017 consists of two parts: (1) a compilation of digital data for more than 450 TEIs as well as standard hydrographic parameters, and (2) the eGEOTRACES Electronic Atlas providing an on-line atlas that includes more than 590 section plots and 130 animated 3D scenes. The digital data are provided in several formats, including ASCII, Excel spreadsheet, netCDF, and Ocean Data View collection. Users can download the full data packages or make their own custom selections with a new on-line data extraction service. In addition to the actual data values, the IDP2017 also contains data quality flags and 1-σ data error values where available. Quality flags and error values are useful for data filtering and for statistical analysis. Metadata about data originators, analytical methods and original publications related to the data are linked in an easily accessible way. The eGEOTRACES Electronic Atlas is the visual representation of the IDP2017 as section plots and rotating 3D scenes. The basin-wide 3D scenes combine data from many cruises and provide quick overviews of large-scale tracer distributions. These 3D scenes provide geographical and bathymetric context that is crucial for the interpretation and assessment of tracer plumes near ocean margins or along ridges. The IDP2017 is the result of a truly international effort involving 326 researchers from 25 countries. This publication provides the critical reference for unpublished data, as well as for studies that make use of a large cross-section of data from the IDP2017. This article is part of a special issue entitled: Conway GEOTRACES - edited by Tim M. Conway, Tristan Horner, Yves Plancherel, and Aridane G. González.

Description: We gratefully acknowledge financial support by the Scientific Committee on Oceanic Research (SCOR) through grants from the U.S. National Science Foundation, including grants OCE-0608600, OCE-0938349, OCE-1243377, and OCE-1546580. Financial support was also provided by the UK Natural Environment Research Council (NERC), the Ministry of Earth Science of India, the Centre National de Recherche Scientifique, l'Université Paul Sabatier de Toulouse, the Observatoire Midi-Pyrénées Toulouse, the Universitat Autònoma de Barcelona, the Kiel Excellence Cluster The Future Ocean, the Swedish Museum of Natural History, The University of Tokyo, The University of British Columbia, The Royal Netherlands Institute for Sea Research, the GEOMAR-Helmholtz Centre for Ocean Research Kiel, and the Alfred Wegener Institute.

Description: Author Posting. © The Author(s), 2018. This is the author's version of the work. It is posted here under a nonexclusive, irrevocable, paid-up, worldwide license granted to WHOI. It is made available for personal use, not for redistribution. The definitive version was published in Marine Chemistry 201 (2018): 183-197, doi:10.1016/j.marchem.2018.01.011.

Description: Iron (Fe)-poor surface waters limit phytoplankton growth and their ability to remove carbon (C) from the atmosphere and surface ocean. Over the past few decades, research has focused on constraining the global Fe cycle and its impacts on the global C cycle. Hydrothermal vents have become a highly debated potential source of Fe to the surface ocean. Two main mechanisms for transport of Fe over long distances have been proposed: Fe-bearing nanoparticles and organic C complexation with Fe in the dissolved (dFe) and particulate (pFe) pools. However, the ubiquity and importance of these processes is unknown at present, and very few vents have been investigated for Fe-Corg interactions or the transport of such materials away from the vent. Here we describe the near-field contributions (first ~100 km from ridge) of pFe and Corg to the Southern East Pacific Rise (SEPR) plume, one of the largest known hydrothermal plume features in the global ocean. Plume particles (〉 0.2 μm) were collected as part of the U.S. GEOTRACES Eastern Pacific Zonal Transect cruise (GP16) by in-situ filtration. Sediment cores were also collected to investigate the properties of settling particles. In this study, X-ray absorption near edge structure (XANES) spectroscopy was used in two complementary X-ray synchrotron approaches, scanning transmission X-ray microscopy (STXM) and X-ray microprobe, to investigate the Fe and C speciation of particles within the near-field non-buoyant SEPR plume. When used in concert, STXM and X-ray microprobe provide fine-scale and representative information on particle morphology, elemental co-location, and chemical speciation. Bulk chemistry depth profiles for particulate Corg (POC), particulate manganese (pMn), and pFe indicated that the source of these materials to the non-buoyant plume is hydrothermal in origin. The plume particles at stations within the first ~100 km down-stream of the ridge were composites of mineral (oxidized Fe) and biological materials (organic C, Corg). Iron chemistry in the plume and in the core-top suspended sediment fluff layer were both dominated by Fe(III) phases, such as Fe(III) oxyhydroxides and Fe(III) phyllosilicates. Particulate sulfur (pS) was a rare component of our plume and sediment samples. When pS was detected, it was in the form of an Fe sulfide mineral phase, composing ≤ 0.4% of the Fe on a per atom basis. The resuspended sediment fluff layer contained a mixture of inorganic (coccolith fragments) and Corg bearing (lipid-rich biofilm-like) materials. The particle morphology and co-location of C and Fe in the sediment was different from that in plume particles. This indicates that if the Fe-Corg composite particles settle rapidly to the sediments, then they experience strong alteration during settling and/or within the sediments. Overall, our observations indicate that the particles within the first ~ 100 km of the laterally advected plume are S-depleted, Fe(III)-Corg composites indicative of a chemically oxidizing plume with strong biological modification. These findings confirm that the Fe-Corg relationships observed for non-buoyant plume particles within ~ 100 m of the vent site are representative of particles within this region of the non-buoyant plume (~100 km). These findings also point to dynamic alteration of Fe-Corg bearing particles during transport and settling. The specific biogeochemical processes at play, and the implications for nutrient cycling in the ocean are currently unknown and represent an area of future investigation.

Description: © The Author(s), 2015. This article is distributed under the terms of the Creative Commons Attribution License. The definitive version was published in Marine Chemistry 177 (2015): 1-8, doi:10.1016/j.marchem.2015.04.005.

Description: The GEOTRACES Intermediate Data Product 2014 (IDP2014) is the first publicly available data product of the international GEOTRACES programme, and contains data measured and quality controlled before the end of 2013. It consists of two parts: (1) a compilation of digital data for more than 200 trace elements and isotopes (TEIs) as well as classical hydrographic parameters, and (2) the eGEOTRACES Electronic Atlas providing a strongly inter-linked on-line atlas including more than 300 section plots and 90 animated 3D scenes. The IDP2014 covers the Atlantic, Arctic, and Indian oceans, exhibiting highest data density in the Atlantic. The TEI data in the IDP2014 are quality controlled by careful assessment of intercalibration results and multi-laboratory data comparisons at cross-over stations. The digital data are provided in several formats, including ASCII spreadsheet, Excel spreadsheet, netCDF, and Ocean Data View collection. In addition to the actual data values the IDP2014 also contains data quality flags and 1-σ data error values where available. Quality flags and error values are useful for data filtering. Metadata about data originators, analytical methods and original publications related to the data are linked to the data in an easily accessible way. The eGEOTRACES Electronic Atlas is the visual representation of the IDP2014 data providing section plots and a new kind of animated 3D scenes. The basin-wide 3D scenes allow for viewing of data from many cruises at the same time, thereby providing quick overviews of large-scale tracer distributions. In addition, the 3D scenes provide geographical and bathymetric context that is crucial for the interpretation and assessment of observed tracer plumes, as well as for making inferences about controlling processes.

Description: We gratefully acknowledge financial support by the Scientific Committee on Oceanic Research (SCOR) through grants from the U.S. National Science Foundation, including grants OCE-0608600, OCE-0938349, and OCE-1243377. Financial support was also provided by the UK Natural Environment Research Council, the Ministry of Earth Science of India, the Centre National de Recherche Scientifique, l'Université Paul Sabatier de Toulouse, the Observatoire Midi-Pyrénées Toulouse, the Universitat Autònoma de Barcelona, the Kiel Excellence Cluster The Future Ocean, the Swedish Museum of Natural History, The University of Tokyo, The University of British Columbia, The Royal Netherlands Institute for Sea Research, the GEOMAR-Helmholtz Centre for Ocean Research Kiel, and the Alfred Wegener Institute.