ALBERT

Description: Metal oxide varistors (MOVs) are a type of resistor with significantly nonlinear current-voltage characteristics commonly used in power lines to protect against overvoltages. If a proper recycling plan is developed MOVs can be an excellent source of secondary zinc because they contain over 90 weight percent zinc oxide. The oxides of antimony, bismuth, and to a lesser degree cobalt, manganese, and nickel are also present in varistors. Characterization of the MOV showed that cobalt, nickel, and manganese were not present in the varistor material at concentrations greater than one weight percent. This investigation determined whether a pH selective dissolution (leaching) process can be utilized as a starting point for hydrometallurgical recycling of the zinc in MOVs. This investigation showed it was possible to selectively leach zinc from the MOV without coleaching of bismuth and antimony by selecting a suitable pH, mainly higher than 3 for acids investigated. It was not possible to leach zinc without coleaching of manganese, cobalt, and nickel. It can be concluded from results obtained with the acids used, acetic, hydrochloric, nitric, and sulfuric, that sulfate leaching produced the most desirable results with respect to zinc leaching and it is also used extensively in industrial zinc production.

Description: As a part of the project “The Big Five”, large-scale multi-channel ground-penetrating radar surveys were carried out at Bårby ringfort (Swedish: borg), Öland, Sweden. The surveys were carried out using a MALÅ Imaging Radar Array (MIRA) system and aimed at mapping possible buried Iron Age and Medieval remains through the interior in order to better understand the purpose of the fort during its periods of use. An additional goal was to evaluate the impact of earlier farming on the preservation of the archaeological remains. The data provided clear evidence of well-preserved Iron Age and Medieval buildings inside the fort. The size and the pattern of the Iron Age houses suggest close similarities with, for example, the previously excavated fort at Eketorp on Öland. Given the presence of a substantial cultural layer together with a large number of artefacts recovered during a metal detection survey, it is suggested that Bårby borg’s primary function during the Iron Age was as a fortified village. The Medieval houses partly cover some of the Iron Age buildings. They are placed in a U-shape with an open square in the middle facing the edge of a limestone cliff. As in the case of Eketorp, it is suggested that the activities during Medieval times changed, but the precise purpose of the Medieval Bårby settlement is still a question open for debate. Future targeted archaeological investigations are needed in order to better understand its purpose. Rescue excavations may also be necessary, as the western steep cliff ledge is eroding and the well-preserved archaeological remains are at risk of being destroyed.

Description: The smart specialisation approach is becoming a strategic instrument for identifying regions’ opportunities for growth and sustainable development. It is a place-based approach and plays an important role in benchmarking regional competitiveness. To have a smart specialisation strategy has been thought of as a key factor in making a choice for investment. Smart specialisation strategies represent a policy measure to overcome disorganised and weak parallel activities in developed EU countries and offer support to those areas that have research, technological and production capacity to carry out particular activities. Smart specialisation strategies, therefore, follow the socio-economic situation in countries and their integrated technological, institutional and business processes. The EU Member States and regions recognised that supporting a limited number of well-identified priorities for knowledge-based investments and/or clusters could advance, focusing on competitive assets and realistic growth capabilities reinforced by a critical mass of action and entrepreneurial resources. However, the role of culture and cultural heritage has not been significant in these processes. As the policy review revealed that circular economy should be considered as a broader sustainable development strategy, which should also “support Member States and regions to strengthen innovation for the circular economy through smart specialisations”, the purpose of this paper is to lay a basis for a new, stronger complementarity between culture, cultural heritage and adaptive reuse practices, and circular economy concepts through smart specialisation strategies.

Description: The Swedish UNESCO World Cultural Heritage site of the Birka and Hovgården Iron Age settlements is well suited for the testing of high-resolution archaeological prospection methods. In May 2006 ground-penetrating radar (GPR) and magnetometer test measurements were conducted at Birka, resulting in data of outstanding quality and new archaeological discoveries, but also demonstrating the need for increased spatial sampling regarding GPR prospection at complex Scandinavian sites. Therefore Birka was selected as a testing ground for a pilot study investigating the suitability of the novel multichannel GPR array system MIRA (MALÅ Imaging Radar Array) for efficient, large-scale GPR surveys with very dense spatial sampling. The study was conducted in May 2008 by MALÅ Geoscience AB in collaboration with the archaeological prospection unit of the Swedish National Heritage Board. The very high-resolution three-dimensional GPR pilot survey demonstrated that it is possible to survey 1 ha and more per day with 8 cm cross-line spacing, mapping archaeological structures in unprecedented resolution, such as postholes of only 25 cm diameter. This paper describes the tested technology and methodology as well as the fieldwork and the results of the study.