ALBERT

Description: Dual carbon isotope analysis of marine aerosol samples has been performed for the first time demonstrating a potential in organic matter apportionment between three principal sources: marine, terrestrial (non-fossil) and fossil fuel due to unique isotopic signatures. The results presented here, utilising combinations of dual carbon isotope analysis, provides conclusive evidence of a dominant biogenic organic fraction to organic aerosol over biologically active oceans. In particular, the NE Atlantic, which is also subjected to notable anthropogenic influences via pollution transport processes, was found to contain 80 % organic aerosol matter of biogenic origin directly linked to plankton emissions. The remaining carbonaceous aerosol was of terrestrial origin. By contrast, for polluted air advected out from Europe into the NE Atlantic, the source apportionment is 30 % marine biogenic, 40 % fossil fuel, and 30 % continental non-fossil fuel. The dominant marine organic aerosol source in the atmosphere has significant implications for climate change feedback processes.

Description: Aerosol source apportionment remains a critical challenge for understanding the transport and aging of aerosols, as well as for developing successful air pollution mitigation strategies. The contributions of fossil and non-fossil sources to organic carbon (OC) and elemental carbon (EC) in carbonaceous aerosols can be quantified by measuring the radiocarbon (14C) content of each carbon fraction. However, the use of 14C in studying OC and EC has been limited by technical challenges related to the physical separation of the two fractions and small sample sizes. There is no common procedure for OC/EC 14C analysis, and uncertainty studies have largely focused on the precision of yields. Here, we quantified the uncertainty in 14C measurement of aerosols associated with the isolation and analysis of each carbon fraction with the Swiss_4S thermal-optical analysis (TOA) protocol. We used an OC/EC analyzer (Sunset Laboratory Inc., OR, USA) coupled to vacuum line to separate the two components. Each fraction was thermally desorbed and converted to carbon dioxide (CO2) in pure oxygen (O2). On average 91% of the evolving CO2 was then cryogenically trapped on the vacuum line, reduced to filamentous graphite, and measured for its 14C content via accelerator mass spectrometry (AMS). To test the accuracy of our set-up, we quantified the total amount of extraneous carbon introduced during the TOA sample processing and graphitization as the sum of modern and fossil (14C-depleted) carbon introduced during the analysis of fossil reference materials (adipic acid for OC and coal for EC) and contemporary standards (oxalic acid for OC and rice char for EC) as a function of sample size. We further tested our methodology by analyzing five ambient airborne particulate matter (PM2.5) samples with a range of OC and EC concentrations and 14C contents in an interlaboratory comparison. The total modern and fossil carbon blanks of our set-up were 0.8 ± 0.4 and 0.67 ± 0.34 μg C, respectively, based on multiple measurements of ultra-small samples. The Swiss_4S protocol and the cryo-trapping contributed 0.37 ± 0.18 μg of modern carbon and 0.13 ± 0.07 μg of fossil carbon to the estimated blanks, with consistent estimates obtained for the two laboratories. There was no difference in the background correction between the OC and EC fractions. Our set-up allowed us to efficiently isolate and trap each carbon fraction with the Swiss_4S protocol and to perform 14C analysis of ultra-small OC and EC samples with high accuracy and low 14C blanks.

Description: We present results from the international field campaign DAURE (Determination of the sources of atmospheric Aerosols in Urban and Rural Environments in the Western Mediterranean), with the objective of apportioning the sources of fine carbonaceous aerosols. Submicron fine particulate matter (PM1) samples were collected during February–March 2009 and July 2009 at an urban background site in Barcelona (BCN) and at a forested regional background site in Montseny (MSY). We present radiocarbon (14C) analysis for elemental and organic carbon (EC and OC) and source apportionment for these data. We combine the results with those from component analysis of aerosol mass spectrometer (AMS) measurements, and compare to levoglucosan-based estimates of biomass burning OC, source apportionment of filter data with inorganic composition + EC + OC, submicron bulk potassium (K) concentrations, and gaseous acetonitrile concentrations. At BCN, 87 % and 91 % of the EC on average, in winter and summer, respectively, had a fossil origin, whereas at MSY these fractions were 66 % and 79 %. The contribution of fossil sources to organic carbon (OC) at BCN was 40 % and 48 %, in winter and summer, respectively, and 31 % and 25 % at MSY. The combination of results obtained using the 14C technique, AMS data, and the correlations between fossil OC and fossil EC imply that the fossil OC at Barcelona is ∼47 % primary whereas at MSY the fossil OC is mainly secondary (∼85 %). Day-to-day variation in total carbonaceous aerosol loading and the relative contributions of different sources predominantly depended on the meteorological transport conditions. The estimated biogenic secondary OC at MSY only increased by ∼40 % compared to the order-of-magnitude increase observed for biogenic volatile organic compounds (VOCs) between winter and summer, which highlights the uncertainties in the estimation of that component. Biomass burning contributions estimated using the 14C technique ranged from similar to slightly higher than when estimated using other techniques, and the different estimations were highly or moderately correlated. Differences can be explained by the contribution of secondary organic matter (not included in the primary biomass burning source estimates), and/or by an overestimation of the biomass burning OC contribution by the 14C technique if the estimated biomass burning EC/OC ratio used for the calculations is too high for this region. Acetonitrile concentrations correlate well with the biomass burning EC determined by 14C. K is a noisy tracer for biomass burning.

Description: We present results from the international field campaign DAURE (Determination of the sources of atmospheric Aerosols in Urban and Rural Environments in the western Mediterranean), with the objective of apportioning the sources of fine carbonaceous aerosols. Submicron fine particulate matter (PM1) samples were collected during February-March 2009 and July 2009 at an urban background site in Barcelona (BCN) and at a forested regional background site in Montseny (MSY). We present radiocarbon (14C) analysis for elemental and organic carbon (EC and OC) and source apportionment for these data. We combine the results with those from component analysis of aerosol mass spectrometer (AMS) measurements, and compare to levoglucosan-based estimates of biomass burning OC, source apportionment of filter data with inorganic+EC+OC speciation, submicron bulk potassium (K) concentrations, and gaseous acetonitrile concentrations. At BCN, 87 % and 91 % of the EC on average, in winter and summer, respectively, had a fossil origin, whereas at MSY these fractions were 66 % and 79 %. The contribution of fossil sources to organic carbon (OC) at BCN was 40 % and 48 %, in winter and summer, respectively, and 31 % and 25 % at MSY. The combination of results obtained using the 14C technique, AMS data, and the correlations between fossil OC and fossil EC imply that the fossil OC at Barcelona is ~65 % primary whereas at MSY the fossil OC is mainly secondary (~85 %). Day-to-day variation in total carbonaceous aerosol loading and the relative contributions of different sources predominantly depended on the meteorological transport conditions. The estimated biogenic secondary OC at MSY only increased by ~40 % compared to the order-of-magnitude increase observed for biogenic volatile organic compounds (VOCs) between winter and summer, which highlights the uncertainties in the estimation of that component. Biomass burning contributions estimated using the 14C technique ranged from similar to higher than when estimated using other techniques, and the different estimations were highly or moderately correlated. Differences can be explained by the contribution of secondary organic matter (not included in the primary biomass burning source estimates), and/or by an overestimation of the biomass burning OC contribution by the 14C technique if the estimated biomass burning EC/OC ratio used for the calculations is too high for this region. Acetonitrile concentrations correlate well with the biomass burning EC determined by 14C. K is a noisy tracer for biomass burning.

Description: Dual carbon isotope analysis has been performed for the first time demonstrating a potential in organic matter apportionment between three principal sources: marine, terrestrial (non-fossil) and fossil fuel due to unique isotopic signatures. The results presented here, utilising combinations of dual carbon isotope analysis, provides a conclusive evidence of a dominant biogenic organic fraction to organic aerosol over biologically active oceans. In particular, the NE Atlantic, which is also subjected to notable anthropogenic influences via pollution transport processes, was found to contain 80% organic aerosol matter of biogenic origin directly linked to plankton emissions. The remaining carbonaceous aerosol was of fossil-fuel origin. By contrast, for polluted air advecting out from Europe into the NE Atlantic, the source apportionment is 30% marine biogenic, 40% fossil fuel, and 30% continental non-fossil fuel. The dominant marine organic aerosol source in the atmosphere has significant implications for climate change feedback processes.

Description: There is a great scientific demand for an assessment of the sources and formation processes of atmospheric carbonaceous aerosols since they strongly influence the global radiation balance and affect public health. Much attention in atmospheric studies has been paid to dicarboxylic acids (DCAs) due to their abundance at substantially different sites and their potential influence on cloud formation processes. Nevertheless, sources of oxalic acid (HOOCCOOH) and other DCAs are not well understood yet. In order to quantify contributions of fossil and non-fossil sources, a method for the preparative separation of oxalic acid and other DCAs from aerosols for compound-specific radiocarbon analysis (CSRA) has been developed. This method consists of a water extraction of aerosols collected on quartz-fiber filters followed by 2 consecutive liquid chromatography (LC) steps on different chromatography columns (2D-chromatography). Through the use of aqueous, completely non-organic eluents and single injections into liquid chromatography, low blank levels are achieved with total oxalic acid recoveries of up to 66%. Upon separation, 14C measurements of small samples (containing typically 10–20 μg carbon) are conducted at the gas ion source of the 200kV accelerator mass spectrometry facility MICADAS. The method is verified with processed reference materials, artificial mixtures of oxalic acid with typical matrix components, and a standard addition of ambient aerosols. Two exemplary field samples show dominant non-fossil sources of oxalic acid.

Description: An on-line measurement system was installed at the MICADAS in Zurich, using an elemental analyzer (EA) as a combustion unit to enable direct radiocarbon measurement of samples containing carbon in the range of 5–100 μg possible with minimum effort. The samples are combusted in small capsules and the gaseous combustion products are separated by the EA. The carbon dioxide leaving the EA in a high helium flow is concentrated on a small external trap containing X13 zeolite adsorber material. This new concept, avoiding a cryogenic trapping for the enrichment step, allows the construction of a very compact system able to work even with the smallest samples. Concentrated on the external trap, the carbon dioxide is flushed into the gas-tight syringe of our gas inlet system using a low helium stream. The gas mixture is measured with the MICADAS gas ion source. Several different sample capsules were analyzed to minimize the major blank contribution coming from the sample vessel. The best results were achieved with 25-μL tin capsules, which contained only 0.34 ± 0.13 μg carbon at 65 pMC. This work describes the development of the on-line system and the protocol for measurement runs. Results are presented for on-line measurements of reference materials and a comparison is performed with typical dating samples measured previously as graphite targets. Finally, relevance and limitations of on-line measurements are discussed.

Description: A dark region in the western ablation zone of the Greenland ice sheet is caused by outcropping ice layers that contain more dust than the surrounding brighter ice. These higher amounts of dust were deposited in the accumulation zone of the ice sheet and travelled with the ice to the ablation zone. To deduce the period and the causes of this higher dust deposition, carbonaceous particles in ice samples from the dark region and from brighter reference ice were analysed and used for dating. Samples including ice from directly below the surface contain high amounts of modern organic carbon, probably from microorganisms on the ice surface. Deeper samples reveal low amounts of carbonaceous particles, which are originally deposited in the accumulation zone. The amount of outcropping carbonaceous particles in the dark region seems significantly higher than in the reference ice. One of the samples that contained material initially deposited in the accumulation zone was dated and revealed Late Holocene ages, coinciding with a period of enhanced eolian activity in the nearby tundra. Therefore, variable eolian activity during the Holocene effected dust fluxes towards the ice and hence leads to albedo variations in the present ablation zone of the ice sheet.

Description: A three-week long field campaign was carried out under autumnal meteorological conditions at four valley floor sites in the industrialised Swiss Rhone Valley. For one week of stable meteorological conditions, particulate matter with an aerodynamic diameter below 10 μm (PM10) was analysed from daily filters using ion chromatography, X-ray fluorescence, anhydrosugars and radiocarbon analysis of the organic and elemental matter (OM and EM, respectively). Furthermore, PM1 composition along the whole campaign was monitored in Massongex (a site near industries) by a seven-wavelength aethalometer and a quadrupole aerosol mass spectrometer (Q-AMS). At all sites, PM10 secondary inorganics and non-fossil EM and OM exhibited relatively stable concentrations over the selected days. On the contrary, PM10 fossil carbonaceous fractions, mineral dust components and several trace elements showed a significant decrease on Sunday, compared to the analysed working days. Their concentrations were also highly correlated. This evidenced the role of exhaust and resuspension emissions by heavy-duty vehicle traffic to the PM10 concentrations along the valley. In Massongex, organic matter and black carbon (BC) were the main contributors to PM1 over the campaign (accounting for 45% and 18% of PM1, respectively). An optical discrimination of BC highlighted the prevalence of fossil over wood-burning sources. Three types of PM1 organics could be identified by factor analysis: primary wood-burning organic aerosol (P-WBOA) dominated the PM1 carbonaceous fraction, followed by oxygenated organics (OOA) mostly representing secondary organics, and by traffic or possibly industry-related hydrocarbon-like organics (HOA) as the smallest carbonaceous contribution. Furthermore, unusually high contributions of fine chloride were detected at all sites. They were attributed to ammonium chloride (NH4Cl) in Massongex and represented the only significant component exclusively attributable to industrial emissions.

Description: Aerosol source apportionment remains a critical challenge for understanding the transport and aging of aerosols, as well as for developing successful air pollution mitigation strategies. The contributions of fossil and non-fossil sources to organic carbon (OC) and elemental carbon (EC) in carbonaceous aerosols can be quantified by measuring the radiocarbon (14C) content of each carbon fraction. However, the use of 14C in studying OC and EC has been limited by technical challenges related to the physical separation of the two fractions and small sample sizes. There is no common procedure for OC/EC 14C analysis, and uncertainty studies have largely focused on the precision of yields. Here, we quantified the uncertainty in 14C measurement of aerosols associated with the isolation and analysis of each carbon fraction with the Swiss_4S thermal–optical analysis (TOA) protocol. We used an OC/EC analyzer (Sunset Laboratory Inc., OR, USA) coupled to a vacuum line to separate the two components. Each fraction was thermally desorbed and converted to carbon dioxide (CO2) in pure oxygen (O2). On average, 91 % of the evolving CO2 was then cryogenically trapped on the vacuum line, reduced to filamentous graphite, and measured for its 14C content via accelerator mass spectrometry (AMS). To test the accuracy of our setup, we quantified the total amount of extraneous carbon introduced during the TOA sample processing and graphitization as the sum of modern and fossil (14C-depleted) carbon introduced during the analysis of fossil reference materials (adipic acid for OC and coal for EC) and contemporary standards (oxalic acid for OC and rice char for EC) as a function of sample size. We further tested our methodology by analyzing five ambient airborne particulate matter (PM2.5) samples with a range of OC and EC concentrations and 14C contents in an interlaboratory comparison. The total modern and fossil carbon blanks of our setup were 0.8 ± 0.4 and 0.67 ± 0.34 μg C, respectively, based on multiple measurements of ultra-small samples. The extraction procedure (Swiss_4S protocol and cryo-trapping only) contributed 0.37 ± 0.18 μg of modern carbon and 0.13 ± 0.07 μg of fossil carbon to the total blank of our system, with consistent estimates obtained for the two laboratories. There was no difference in the background correction between the OC and EC fractions. Our setup allowed us to efficiently isolate and trap each carbon fraction with the Swiss_4S protocol and to perform 14C analysis of ultra-small OC and EC samples with high accuracy and low 14C blanks.