ISSN:
0933-5137
Keywords:
Chemistry
;
Polymer and Materials Science
Source:
Wiley InterScience Backfile Collection 1832-2000
Topics:
Mechanical Engineering, Materials Science, Production Engineering, Mining and Metallurgy, Traffic Engineering, Precision Mechanics
Description / Table of Contents:
Prestressing of Brick Lined Vessels with Regard to the Thermal Creeping of Mortars Based on Condensating ResinsCeramic linings, applied in steel vessels to protect these from chemical attacks, have a lower thermal expansion coefficient than the steel shell. Moreover ceramic is very sensitive to tensile stress. If temperature in the subsequent operation exceeds very much those during application of the brick lining, the greater expansion of the steel shell put the lining under tensile stress and may cause cracks which nullify its protection effect. Remedy by thicken the brick lining or by external heating of the shell during the application of the masonry is limited only.More effective is a pre-stressing of the brick lining before or whilst the start up. This procedure bases on the property of irreversible thermal creeping, owned by the phenolic and furan resin based mortars, which are used for bedding and pointing of the brick linings. This property of the above mortars formerly has been taken for mere swelling. It was not yet exactly determinable and so making use of it was rather unsave.This treatise contains data about the possible dimensions of the thermal creeping, depending on kind and age of the mortar as well as on the thermal increase and the reached amount of temperature. Reference is given to the practical use of this knowledge for the execution of prestress cooking.
Notes:
Keramische Ausmauerungen in stählernen Behältern, die diese gegen Angriffe durch Chemikalien schützen sollen, haben eine geringere Wärmedehnzahl als der Mantel. Zudem ist Keramik gegen Zugspannungen sehr empfindlich. Bei betrieblicher Erwärmung gegenüber der Ausmauerungstemperatur kann das Mauerwerk infolge der größeren Ausdehnung des Stahlmantels unter so starke Zugbeanspruchung geraten, daß Risse entstehen, die die Schutzwirkung der Ausmauerung zunichte machen. Abhilfe durch dickeres Mauerwerk oder äußeres Erwärmen des Mantels während des Ausmauerns ist nur begrenzt möglich.Wirkungsvoller ist es, der Ausmauerung vor oder bei der Inbetriebnahme eine Druckvorspannung zu geben. Diese Maßnahme beruht auf der Eigenschaft des irreversiblen thermischen Fließens der zum Verlegen und Verfügen der keramischen Ausmauerung dienenden Kondensationsharzkitte. Dieses, bisher als “Quellung” angesehene Kitt-Verhalten war nicht genauer bestimmbar und seine Anwendung deshalb mit Unsicherheiten behaftet.Die Abhandlung enthält Meßdaten über das mögliche Ausmaß des Fließens in Abhängigkeit von Art und Alter des Kittes sowie von der Steigerungsrate und der erreichten Höhe der Temperatur. Hinweise für die praktische Anwendung dieser Erkenntnisse bei Vorspannkochungen werden gegeben.
Additional Material:
4 Tab.
Type of Medium:
Electronic Resource
URL:
http://dx.doi.org/10.1002/mawe.19840150604
Permalink