ISSN:
1573-8663
Keywords:
photostriction
;
photovoltaic effect
;
sol–gel
;
PLZT, doping effect
;
tungsten, niobium
Source:
Springer Online Journal Archives 1860-2000
Topics:
Electrical Engineering, Measurement and Control Technology
,
Mechanical Engineering, Materials Science, Production Engineering, Mining and Metallurgy, Traffic Engineering, Precision Mechanics
Notes:
Abstract Lanthanum-modified lead zirconate titanate (PLZT) ceramic materials have gained considerable attention due to their photostriction, which is the superposition of photovoltaic and piezoelectric effects. However, the photovoltaic effect and the induced strain response are also influenced by the fabrication and processing conditions. The PLZT ceramics produced by conventional oxide mixing process exhibit moderate photostrictive properties due to the inhomogeneous distribution of impurities. In this study, ceramics of PLZT (3/52/48) doped with WO3 and Nb2O5 were prepared by sol–gel technique using lead(II) acetate trihydrate, lanthanum(III) acetylacetonate hydrate, Zr, Ti, Nb, and W alkoxides. It was found that WO3 and Nb2O5 were effective in suppressing the grain growth of PLZT, which lead to the enhancement of photovoltaic and photostrictive properties. Photovoltaic and photostrictive responses show ed a maximum for samples with 0.5 at% WO3 doped sol–gel PLZT. It has been shown that the sol–gel derived PLZT ceramics with proper density possess the possibility of enhancing the photostriction over ceramics produced by conventional oxide mixing process.
Type of Medium:
Electronic Resource
URL:
http://dx.doi.org/10.1023/A:1009906600737
Permalink