ISSN:
0933-5137
Keywords:
Chemistry
;
Polymer and Materials Science
Source:
Wiley InterScience Backfile Collection 1832-2000
Topics:
Mechanical Engineering, Materials Science, Production Engineering, Mining and Metallurgy, Traffic Engineering, Precision Mechanics
Description / Table of Contents:
Oxidation of Indium and Eutectic Indium AlloysThe examination of the oxidation of indium and eutectic InSn- and InBi-alloys is described. The thicknesses of the oxid layers depend on the manufacturing methods of the material investigated: A specimen of an In-bullion and the eutectic foils have a thickness of oxid layers of 10 nm, an In-layer evaporated in a vacuum chamber - only 3 nm. At the surface InO is detected which turns in deeper layers into In2O3. By tempering at 250°C for 65 h at air the thickness of the oxide remains constant but its composition is changed. Below the InO there ist probably a mixture of In2O3 and In(OH)3. This mixture turns into In2O3 in the depth. The part of the adsorbed oxygen is higher in the tempered specimen. At the surface of InSn48 we determined a mixture of In- and Sn-oxides. During the melting process at air the oxide layer grows up to nearly 25 nm, but remains constant between 10 s and 3 min. InBi34 reacts like In, Bi does not seem to take part in the oxidation.
Notes:
Es wird die Oxidation von Indium und eutektischen InSn- und InBi-Legierungen untersucht. Dicke und Zusammensetzung der Oxidschichten sind abhängig von der Herstellungstechnologie. Während ein Stück aus einem In-Barren und eutektische Lotfolien eine 10 nm dicke Oxidschicht aufweisen, hat eine vakuumtechnisch hergestellte In-Schicht nur eine 3 nm dicke. An der Oberfläche wird InO nachgewiesen, das in der Tiefe in In2O3 übergeht. Beim Tempern an Luft (250°C) ändert sich die Zusammensetzung der Schicht, aber nicht die Dicke. Unter dem InO liegt vermutlich ein Gemisch aus In2O3 und In(OH)3, das dann wieder in In2O3 übergeht. Der Anteil des gelösten Sauerstoffs erhöht sich durch Tempern. Bei InSn48 besteht die Oxidschicht aus einem Gemisch aus In- und Sn-Oxiden. Die Oxidschichtdicke wächst durch Aufschmelzen an Luft auf etwa 25 nm, bleibt aber zwischen 10 s und 3 min konstant. InBi34 verhält sich wie In, Bi scheint an der Oxidation nicht teilzunehmen.
Additional Material:
6 Ill.
Type of Medium:
Electronic Resource
URL:
http://dx.doi.org/10.1002/mawe.19930240113
Permalink