ISSN:
0947-5117
Keywords:
Chemistry
;
Polymer and Materials Science
Source:
Wiley InterScience Backfile Collection 1832-2000
Topics:
Mechanical Engineering, Materials Science, Production Engineering, Mining and Metallurgy, Traffic Engineering, Precision Mechanics
Description / Table of Contents:
Current density-potential measurements on stainless steels in active mediaIn order to elucidate the susceptibility to selective corrosion of weld seams in stainless steels potentio-kinetic current density-potential measurements have been made. When the polarisation curve for the weld seam is more anodic in the vicinity of the rest potential than the curve corresponding to the base material the weld seam is selectively attacked; when, however, the weld seam is moer cathodic than the base metal there is almost no corrosion in the adjacent areas because of the large area ratio (large anode, small cathode). It is only in extreme cases (very high potential difference between cathodic weld seam and anodic plate) that local corrosion is found in the base metal. Tests with Hastelloy B in 20% hydrochloric acid show that this material cannot be welded successfully with identical material; it might, however, be feasible to weld it with cathodically alloyed weld fillers (alloyed with Pt or Pd).
Notes:
Zur Klärung der selektiven Korrosions-anfälligkeit von Schweißnähten in nicht-rostendem Stahl wurden potentiokinetische Stromdichte/Spanungsmessungen durchgeführt. Ist die Polarisationskurve für die Schweißnaht in der Nähe des Ruhepotentials anodischer als die Kurve für den Grundwerkstoff, so wird die Schweißnaht selektiv angegriffen; ist hingegen die Schweißnaht gegenüber dem Grundmetall kathodisch, so kommt es wegen des Flächenverhältnisses (große Anode, kleine Kathode) kaum zu Korrosion im Blech. Lediglich in Extremfällen (sehr hober Potentialunterschied zwischen kathodischer Schweißnaht und anodischem Blech) kommt es zu örtlicher Korrosion im Grundwerkstoff. Die Versuche mit Hastelloy in 20%iger Salzsäure zeigen, daß dieser Werkstoff nicht artgleich geschweißt werden darf; eine Möglichkeit hierfür können jedoch vielleicht kathodisch legierte (mit Pt oder Pd) Schweißzusatzwerkostffe darstellen.
Additional Material:
9 Ill.
Type of Medium:
Electronic Resource
URL:
http://dx.doi.org/10.1002/maco.19680190908
Permalink