ISSN:
1573-4862
Keywords:
Thermal embrittlement
;
fracture toughness
;
fractography
;
strain-to-failure
;
small punch test
;
acoustic nonlinearity
;
second harmonic amplitude
Source:
Springer Online Journal Archives 1860-2000
Topics:
Electrical Engineering, Measurement and Control Technology
,
Mathematics
Notes:
Abstract This paper describes an attempt to characterize the deterioration of a structural material's mechanical properties by nonlinear acoustics. In this particular case, the damage was caused by “thermal embrittlement” during which the material, here the nickel-based alloy Inconel 718, loses a significant fraction of its fracture toughness. Harmonic generation was the experimental method used to characterize the microstructural changes in the material as a function of exposure time at elevated temperatures. Tests were performed on two heats of Inconel 718 with slightly different chemistries, with one heat showing particular sensitivity of the fracture toughness to the elevated temperature exposure with corresponding higher changes in the nonlinearity parameter. As a mechanical measure of the fracture toughness deterioration, a small specimen punch test was used in which the ductility of a thin slice of material is determined. A clear difference between the two heats was noted in the metallographic examination, which is reflected in the harmonic generation as well as the punch test data. An explanation for the changes of the harmonic generation during the embrittlement process is speculative at the present time.
Type of Medium:
Electronic Resource
URL:
http://dx.doi.org/10.1023/A:1022616400990
Permalink
