ALBERT

Description: Geological disasters are responsible for the loss of human lives and for significant economic and financial damage every year. Considering that these disasters may occur anywhere—both in remote and/or in highly populated areas—and anytime, continuously monitoring areas known to be more prone to geohazards can help to determine preventive or alert actions to safeguard human life, property and businesses. Remote sensing technology—especially satellite-based—can be of help due to its high spatial and temporal coverage. Indeed, data acquired from the most recent satellite missions is considered suitable for a detailed reconstruction of past events but also to continuously monitor sensitive areas on the lookout for potential geohazards. This work aims to apply different techniques and methods for extensive exploitation and analysis of remote sensing data, with special emphasis given to landslide hazard, risk management and disaster prevention. Multi-temporal SAR (Synthetic Aperture Radar) interferometry, SAR tomography, high-resolution image matching and data modelling are used to map out landslides and other geohazards and to also monitor possible hazardous geological activity, addressing different study areas: (i) surface deformation of mountain slopes and glaciers; (ii) land surface displacement; and (iii) subsidence, landslides and ground fissure. Results from both the processing and analysis of a dataset of earth observation (EO) multi-source data support the conclusion that geohazards can be identified, studied and monitored in an effective way using new techniques applied to multi-source EO data. As future work, the aim is threefold: extend this study to sensitive areas located in different countries; monitor structures that have strategic, cultural and/or economical relevance; and resort to artificial intelligence (AI) techniques to be able to analyse the huge amount of data generated by satellite missions and extract useful information in due course

Description: Published

Description: 4269

Description: 2T. Deformazione crostale attiva

Description: JCR Journal

Description: The offset tracking technique based on synthetic aperture radar (SAR) image intensity information can estimate glacier displacement even when glacier velocities are high and the time interval between images is long, allowing for the broad use of this technique in glacier velocity monitoring. Terrestrial laser scanners, a non-contact measuring system, can measure the velocity of a glacier even if there are no control points arranged on a glacier. In this study, six COSMO-SkyMed images acquired between 31 July and 22 December 2016 were used to obtain the glacial movements of five glaciers on the northern slope of the central Himalayas using the offset tracking approach. During the period of image acquirement, a terrestrial laser scanner was used, and point clouds of two periods in a small area at the terminus of the Pingcuoliesa Glacier were obtained. By selecting three fixed areas of the point clouds that have similar shapes across two periods, the displacements of the centers of gravity of the selected areas were calculated by using contrast analyses of feature points. Although the overall low-density point clouds data indicate that the glacial surfaces have low albedos relative to the wavelength of the terrestrial laser scanner and the effect of its application is therefore influenced in this research, the registration accuracy of 0.0023 m/d in the non-glacial areas of the scanner’s measurements is acceptable, considering the magnitude of 0.072 m/d of the minimum glacial velocity measured by the scanner. The displacements from the point clouds broadly agree with the results of the offset tracking technique in the same area, which provides further evidence of the reliability of the measurements of the SAR data in addition to the analyses of the root mean squared error of the velocity residuals in non-glacial areas. The analysis of the movement of five glaciers in the study area revealed the dynamic behavior of these glacial surfaces across five periods. G089972E28213N Glacier, Pingcuoliesa Glacier and Shimo Glacier show increasing surface movement velocities from the terminus end to the upper part with elevations of 1500 m, 4500 m, and 6400 m, respectively. The maximum velocities on the glacial surface profiles were 31.69 cm/d, 62.40 cm/d, and 42.00 cm/d, respectively. In contrast, the maximum velocity of Shie Glacier, 50.60 cm/d, was observed at the glacier’s terminus. For each period, Glacier G090138E28210N exhibited similar velocity values across the surface profile, with a maximum velocity of 39.70 cm/d. The maximum velocities of G089972E28213N Glacier, Pingcuoliesa Glacier, and Shie Glacier occur in the areas where the topography is steepest. In general, glacial surface velocities are higher in the summer than in the winter in this region. With the assistance of a terrestrial laser scanner with optimized wavelengths or other proper ground-based remote sensing instruments, the offset tracking technique based on high-resolution satellite SAR data should provide more reliable and detailed information for local and even single glacial surface displacement monitoring.

Description: Geological disasters are responsible for the loss of human lives and for significant economic and financial damage every year. Considering that these disasters may occur anywhere—both in remote and/or in highly populated areas—and anytime, continuously monitoring areas known to be more prone to geohazards can help to determine preventive or alert actions to safeguard human life, property and businesses. Remote sensing technology—especially satellite-based—can be of help due to its high spatial and temporal coverage. Indeed, data acquired from the most recent satellite missions is considered suitable for a detailed reconstruction of past events but also to continuously monitor sensitive areas on the lookout for potential geohazards. This work aims to apply different techniques and methods for extensive exploitation and analysis of remote sensing data, with special emphasis given to landslide hazard, risk management and disaster prevention. Multi-temporal SAR (Synthetic Aperture Radar) interferometry, SAR tomography, high-resolution image matching and data modelling are used to map out landslides and other geohazards and to also monitor possible hazardous geological activity, addressing different study areas: (i) surface deformation of mountain slopes and glaciers; (ii) land surface displacement; and (iii) subsidence, landslides and ground fissure. Results from both the processing and analysis of a dataset of earth observation (EO) multi-source data support the conclusion that geohazards can be identified, studied and monitored in an effective way using new techniques applied to multi-source EO data. As future work, the aim is threefold: extend this study to sensitive areas located in different countries; monitor structures that have strategic, cultural and/or economical relevance; and resort to artificial intelligence (AI) techniques to be able to analyse the huge amount of data generated by satellite missions and extract useful information in due course.