ALBERT

Description: Trace-element zoning in igneous phenocrysts and cumulus phases is an informative record of magmatic evolution. The advent of microbeam X-ray fluorescence (XRF) mapping has allowed rapid chemical imaging of samples at thin section to decimeter scale, revealing such zoning patterns. Mapping with synchrotron radiation using multidetector arrays has proved especially effective, allowing entire thin sections to be imaged at micrometer-scale resolution in a matter of hours. The resolution of subtle minor element zoning, particularly in first-row transition metals, is greatly enhanced in synchrotron X-ray fluorescence microscopy (XFM) images by scanning with input beam energy below the FeKα line. In the examples shown here, from a phenocryst rich trachybasalt from Mt Etna (Italy) and from a Ni-Cu-PGE ore-bearing intrusion at Norilsk (Siberia), the zoning patterns revealed in this way record aspects of the crystallization history that are not readily evident from XFM images collected using higher incident energies and that cannot be obtained at comparable spatial resolutions by any other methods within reasonable scan times. This approach has considerable potential as a geochemical tool for investigating magmatic processes and is also likely to be applicable in a wide variety of other fields.

Description: The Ntaka Hill Ni-Cu deposit in Tanzania lies within the Mozambique belt, a complex, long-lived Neoproterozoic suture zone that formed during the amalgamation of Gondwana. The deposit is hosted within the moderately deformed Ntaka Ultramafic Complex, which was emplaced at ~660 Ma, around 20 m.y. before the East African orogeny. Due to strain partitioning into amphibolites and metapyroxenites at the margins of the sills, magmatic cumulate textures are very well preserved. The Ntaka Hill mineralization is predominantly disseminated sulfides within orthopyroxenites and harzburgites. Sulfides show typical magmatic mineralogy and occur as isolated blebs and interstitial networks as well as in soft-walled segregation veins that form localized shoot-like high-grade zones. Deformation had relatively little effect on the deposition of sulfides other than minor localization of strain within some preexisting sulfide-dominant veins. Grade shells define elongate tubular channels that coincide broadly with the more magnesian cumulate rocks. Base and precious metal tenors are widely variable, ranging from 1 to 17% Ni and 0.5 to 10% Cu with no particular correlation with host-rock type, although the tenor range in the more magnesian cumulates is more restricted, with the low-tenor component (

Description: Chromite is one of the earliest crystallized minerals from mafic melts and has been used as an important “petrogenetic indicator.” Its composition may be modified by interaction with intercumulate melt and adjacent minerals. Thus, chromite in mafic-ultramafic rocks contains clues to the geochemical affinity, evolution, and mantle source of its parent magmas. The Devonian Xiarihamu intrusion, located in the East Kunlun Orogenic Belt in the northern Tibet Plateau, China, hosts a very large disseminated Ni-Co sulfide deposit. This study focuses on geochemistry of the chromite enclosed in olivine of ultramafic rocks of the intrusion. Enrichments in Mg and Al in the rim of the chromite indicate only minor effects of alteration on the compositions of the chromite. The chromites enclosed in the olivines with forsterite percentage (Fo) lower than 87 are characterized by large variations in major and trace elements, such as large ranges of Cr·100/(Cr+Al) (Cr# = 15–47), Mg·100/(Mg+Fe2+) (Mg# = 41–65), and Al2O3 (= 26–53 wt%) as well as 380–3100 ppm V, 70–380 ppm Ga, and 1100–16300 ppm Zn. The chromites display positive correlations between Cr/(Cr+Al) and Ti, Mn, V, Ga, and Sc, inconsistent with fractional crystallization but indicative of an interaction between the chromites, intercumulate melts and hosting minerals. In contrast, chromites hosted in olivine with Fo > 87 in harzburgite have small variations in Cr# (ranging from 37 to 41), Mg# (48 to 51), and Al2O3 (30 to 35 wt%) as well as restricted variation in trace elements, indicating relatively weak interaction with trapped liquid and adjacent phases; these compositions are close to those of the most primitive, earliest crystallized chromites. The most primitive chromite has similarities with chromite in mid-ocean ridge basalt (MORB) in TiO2 and Al2O3 contents (0.19–0.32 and 27.9–36.3 wt%, respectively) and depletion of Sc and enrichment of Ga and Zn relative to MORB chromite. The geochemistry of the chromite indicates a partial melting of the asthenospheric mantle that was modified by melts derived from the subduction slab at garnet-stable pressures.

Description: Pentlandite is the dominant Ni-hosting ore mineral in most magmatic sulfide deposits and has conventionally been interpreted as being entirely generated by solid-state exsolution from the high-temperature monosulfide solid solution (MSS) (Fe,Ni)1–xS. This process gives rise to the development of loops of pentlandite surrounding pyrrhotite grains. Recently it has been recognized that not all pentlandite forms by exsolution. Some may form as the result of peritectic reaction between early formed MSS and residual Ni-Cu–rich sulfide liquid during differentiation of the sulfide melt, such that at least some loop textures may be genuinely magmatic in origin. Testing this hypothesis involved microbeam X-ray fluorescence mapping to image pentlandite-pyrrhotite-chalcopyrite intergrowths from a range of different deposits. These deposits exemplify slowly cooled magmatic environments (Nova, Western Australia; Sudbury, Canada), globular ores from shallow-level intrusions (Norilsk, Siberia), extrusive komatiite-hosted ores from low and high metamorphic-grade terranes, and a number of other deposits. Our approach was complemented by laser ablation-inductively coupled plasma-mass spectrometry analysis of palladium in varying textural types of pentlandite within these deposits. Pentlandite forming coarse granular aggregates, together with loop-textured pentlandite where chalcopyrite also forms part of the loop framework, consistently has the highest Pd content compared with pentlandite clearly exsolved as lamellae from MSS or pyrrhotite. This is consistent with much of granular and loop pentlandite being formed by peritectic reaction between Pd-rich residual sulfide liquid and early crystallized MSS, rather than forming entirely by subsolidus grain boundary exsolution from MSS, as has hitherto been assumed. The wide range of Pd contents in pentlandite in individual samples reflects a continuum of processes between peritectic reaction and grain boundary exsolution. Textures in metamorphically recrystallized ores are distinctly different from loop-textured ores, implying that loop textures cannot be regenerated (except in special circumstances) by metamorphic recrystallization of original magmatic-textured ores. The presence of loop textures can therefore be taken as evidence of a lack of penetrative deformation and remobilization at submagmatic temperatures, a conclusion of particular significance to the interpretation of the Nova deposit as having formed synchronously with the peak of regional deformation at temperatures within the sulfide melting range.

Description: The Nova-Bollinger Ni-Cu sulfide ore deposit is the first economic Ni-Cu-Co sulfide deposit to have been discovered in the Albany-Fraser orogen in Western Australia. The host rocks are mafic-ultramafic intrusive cumulates subdivided into two connected intrusions, designated Upper and Lower. The Upper Intrusion is bowl-shaped and modally layered with alternating peridotite and norite mesocumulate layers, with a Basal Series of dominantly orthocumulate mafic lithologies. The Lower Intrusion is a much thinner, semiconformable chonolith (flattened tube-shaped intrusion) consisting of mostly unlayered mafic to ultramafic orthocumulates. The Lower Intrusion hosts all the high-grade mineralization and most of the disseminated ores. A distinctive plagioclase-bearing lherzolite containing both orthopyroxene and olivine as cumulus phases is a characteristic of the Lower Intrusion and the Basal Series of the Upper. The intrusions differ slightly in olivine and spinel chemistry, the differences being largely attributable to the more orthocumulate character of the Lower Intrusion. Sector zoning in Cr content of pyroxenes is observed in the Lower Intrusion and in the lower marginal zone of the Upper and is attributed to crystallization under supercooled conditions. Symplectite pyroxene-spinel-amphibole coronas at olivine-plagioclase contacts are ubiquitous and are attributed to near-solidus peritectic reaction between olivine, plagioclase, and liquid during and after high-pressure emplacement, consistent with high Al contents in igneous pyroxenes and estimates of the peak regional metamorphism. Original cumulus olivines had compositions around Fo86 and were variably Ni depleted, interpreted as the result of preintrusion equilibration with sulfide liquid. The Upper and Lower Intrusion rocks represent cumulates from a similar parental magma, a high-Al tholeiite with MgO between 10 and 12%, low TiO2 (0.5–0.6%), and high Al2O3 (14–17%). Modeling using alphaMELTS indicates a primary water content of around 2 wt %. The cumulates of both intrusions were derived via multiple magma pulses of liquid-olivine-sulfide slurries with variable amounts of orthopyroxene, emplaced into the deep crust at pressures of around 0.7 GPa during the peak of regional metamorphism. The intrusions developed initially as a bifurcating sill, the lower arm developing into the ore-bearing Lower Intrusion chonolith and the upper arm inflating into the cyclically layered Upper Intrusion.

Description: Microanalysis can provide rapid, quantitative characterization of mineral systems that complements the field- and core-scale observations traditionally made in ore deposits. We review recent innovations in microanalytical procedures and their application to studies of ore deposits. Case studies are presented examining how microanalysis can provide constraints on macroscopic processes within mineral systems. Synchrotron X-ray fluorescence shows centimetre-scale chemical variations associated with proximity to mineralization in samples from Sunrise Dam Gold Mine, Western Australia. Pseudomorphs of igneous plagioclase and chemically driven recrystallization interpreted from electron backscatter diffraction suggest that the system was dominated by fluid-driven brecciation with very little shearing. Both the fluid chemistry and fluid pressure evolved during a protracted sequence of vein formation and alteration accompanying gold mineralization. A second case study of sulphide mineralogy at the Mt Keith nickel sulphide deposit, Western Australia demonstrates how X-ray computed tomography combined with trace element mapping can constrain the chemistry and dynamics of magmatic systems. Large-scale interaction between silicate and sulphide melts, shown by homogenous palladium enrichment in pentlandite, leads to a large proportion of globular ores with a high nickel content. Increasing use of microanalysis in ore deposit geology is resulting in the constant reassessment of established models for ore genesis though a combination of micro- and macroscale datasets.