ISSN:
0947-5117
Keywords:
Chemistry
;
Polymer and Materials Science
Source:
Wiley InterScience Backfile Collection 1832-2000
Topics:
Mechanical Engineering, Materials Science, Production Engineering, Mining and Metallurgy, Traffic Engineering, Precision Mechanics
Description / Table of Contents:
Corrosion behaviour of high chromium ferritic stainless steelsFerritic steels developed for seawater desalination and containing 20 to 28% chromium, up to 5% Mo and additions of nickel and copper have been tested with respect to their corrosion behaviour, in particular in chloride containing media. The materials in the sensibilized state were tested for inter-crystalline corrosion susceptibility in the Strauß-, Streicher-, nitric acid hydrofluoric acid- and Huey-Tests. No intercrystalline corrosion was encountered in the case of the steels with 28% Cr and 2% Mo. The resistance to pitting was assessed on the basis of rupture potentials determined by potentiokinetic tests. The resistance of the steels with 20% Cr and 5% Mo or 28% Cr and 2% Mo is superior to that of the molybdenum containing austenitic types. Addition of nickel yields a significant increase in crevice corrosion resistance; the same applies to resistance in sulfuric acid. In boiling seawater all the materials tested are resistant to stress corrosion cracking. No sign of any type of corrosion was found on nickel containing steels after about 6000 hours exposure to boiling 50% seawater brine even under salt deposits.
Notes:
Für die Meerwasserentsalzung entwickelte ferritische Stähle mit 20 bis 28% Cr bis zu 5% Mo sowie mit Nickel- und Kupferzusätzen sind auf ihr Korrosionsverhalten, besonders in chloridhaltigen Medien, hin untersucht worden. Die Werkstoffe wurden im Strauß-, Streicher-, Salpetersäure-Fluß säure- und Hueytest im sensibilisierten Zustand auf Anfälligkeit gegen interkristalline Korrosion geprüft. Die Stähle mit 28% Cr und 2% Mo weisen in keiner dieser Prüfungen Kornzerfall auf. Die Lochfraßbeständigkeit wurde anhand potentiokinetisch bestimmter Durchbruchpotentiale ermittelt. Die Beständigkeit der Stähle mit 20% Cr und 5% Mo sowie mit 28% Cr und 2% Mo übertrifft die der molybdänhaltigen austenitischen Qualitäten. Durch einen Nickelzusatz wird die Beständigkeit gegen Spaltkorrosion entscheidend verbessert. Das Gleiche gilt für die Beständigkeit in Schwefelsäure. In siedendem Meerwasser sind sämtliche Versuchswerkstoffe beständig gegen Spannungsrißkorrosion. Die nickelhaltigen Stähle wiesen nach ca. 6000 h in siedender 15%iger Meerwassersole selbst unter Salzankrustungen keinerlei Anzeichen irgendeiner Korrosionsart auf.
Additional Material:
12 Ill.
Type of Medium:
Electronic Resource
URL:
http://dx.doi.org/10.1002/maco.19760270605
Permalink