ALBERT

Notes: Abstract The ridge located between 31° S and 34°30′S is spreading at a rate of 35 mm yr−1, a transitional velocity between the very slow (≤20 mm yr−1) opening rates of the North Atlantic and Southwest Indian Oceans, and the intermediate rates (60 mm yr−1) of the northern limb of the East Pacific Rise, and the Galapagos and Juan de Fuca Ridges. A synthesis of multi-narrow beam, magnetics and gravity data document that in this area the ridge represents a dynamically evolving system. Here the ridge is partitioned into an ensemble of six distinct segments of variable lengths (12 to 100 km) by two transform faults (first-order discontinuities) and three small offset (〈 30 km) discontinuities (second-order discontinuities) that behave non-rigidly creating complex and heterogeneous morphotectonic patterns that are not parallel to flow lines. The offset magnitudes of both the first and second-order discontinuities change in response to differential asymmetric spreading. In addition, along the fossil trace of second-order discontinuities, the lengths of abyssal hills located to either side of a discordant zone are observed to lengthen and shorten creating a saw-toothed pattern. Although the spreading rate remains the same along the length of the ridge studied, the morphology of the spreading segments varies from a deep median valley with characteristics analogous to the rift segments of the North Atlantic to a gently rifted axial bulge that is indistinguishable from the shape and relief of the intermediate rate spreading centers of the East Pacific Rise (i.e., 21°N). Like other carefully surveyed ridge segments at slow and fast rates of accretion, the along-axis profiles of each ridge segment are distinctly convex upwards, and exhibit along-strike changes in relief of 500m to 1500 between the shallowest portion of the segment (approximate center) and the segment ends. Such spatial variations create marked along-axis changes in the morphology and relief of each segment. A relatively low mantle Bouguer anomaly is known to be associated with the ridge segment characterized by a gently rifted axial bulge and is interpreted to indicate the presence of focused mantle upwelling (Kuo and Forsyth, 1988). Moreover, the terrain at the ends of each segment are known to be highly magnetized compared to the centers of each segment (Carbotte et al, 1990). Taken together, these data clearly establish that these profound spatial variations in ridge segment properties between adjoining segments, and along and across each segment, indicate that the upper mantle processes responsible for the formation of this contrasting architecture are not solely related to passive upwelling of the asthenosphere beneath the ridge axis. Rather, there must be differences in the thermal and mechanical structure of the crust and upper mantle between and along the ridge segments to explain these spatial variations in axial topography, crustal structure and magnetization. These results are consistent with the results of investigations from other parts of the ridge and suggest that the emplacement of magma is highly focused along segments and positioned beneath the depth minimum of a given segment. The profound differences between segments indicate that the processes governing the behavior of upwelling mantle are decoupled and the variations in the patterns of axis flanking morphology and rate of accretion indicate that processes controlling upwelling and melt production vary markedly in time as well. At this spreading rate and in this area, the accretionary processes are clearly three-dimensional. In addition, the morphology of a ridge segment is not governed so much by opening rate as by the thermal structure of the mantle which underlies the segment.

Notes: Abstract Continuous along-axis Sea Beam coverage of the slow-intermediate spreading (34–38 mm yr−1 full rate) southern Mid-Atlantic Ridge (25°–27°30′S and 31°–38° S) shows that the ridge axis is segmented by both rigid and non-rigid discontinuities. Following the model of Macdonald et al. (1988b), a hierarchy of four orders is proposed for ridge axis discontinuities based on a continuum of relative age and distance offset across the discontinuites. This paper discusses the characteristics associated with five second-order discontinuities found in the areas surveyed. First-order discontinuities represent rigid offsets, transform faults, whereas non-rigid discontinuities fall into the second, third and fourth orders. Like transform fault boundaries, second-order discontinuities have distinctive morphologic signatures both on and off-axis-discordant zones — and therefore are better defined than third- or fourth-order discontinuities. Second-order discontinuities are offsets that range in distance from less than 10 km to approximately 30 km and vary in age offset from 0.5 to approximately 2.0 m.y. The variable morphotectonic geometries associated with these discontinuities indicate that horizontal shear strains are accommodated by both extensional and strike-slip tectonism and that the geometries are unstable in time. Three characteristic geometries are recognized: (1)en echelon jog in the plate boundary where ridge axis tips overlap slightly, (2)en echelon jog in the plate boundary where ridge axes are separated by an extensional basin whose long axis is oriented parallel to the strike of the adjoining ridge axes, and (3) oblique offset characterized by a large extensional basin that is oriented approximately 45° to the strike of the ridge axes. In the case of the third type, evidence for short strands of strike-slip tectonism that link an obliquely oriented extensional basin flanking ridge tips is often apparent. Analysis of the detailed bathymetric and magnetic data collected over the second-order discontinuities and their off axis terrain out to 5–7 m.y. documents that second-order discontinuities can follow several evolutionary paths: they can evolve from transform fault boundaries through prolonged asymmetric spreading, they may migrate along strike leaving a V-shaped wake, and they may remain in approximately the same position but oscillate slightly back and forth. In addition, a small change in the pole of relative motion occurring 4–5 Ma is thought to have resulted in the initiation of at least one second-order discontinuity in the survey area. A geologic model is proposed which involves the interplay of lithospheric thickness, asymmetric spreading, temporal and spatial variability of along-axis magmatic input and changes in the poles of relative motion to explain the origin, morphology and evolution of second-order ridge axis discontinuities.

Notes: Abstract During the Fall of 1979, a manned submersible program, utilizing DSRV ALVIN, was carried out at the intersection of the East Pacific Rise (EPR) with the Tamayo Transform boundary. A total of seven dives were completed in the vicinity of the EPR/Tamayo intersection depression and documented the geologic relationships that characterize the juxtaposition of these types of plate boundaries. The young volcanic terrain of the EPR axis can be traced into and across the Tamayo Transform valley but becomes buried by sedimentary talus that is being shed from sediment scarps along the unstable sediment slope that defines the north side of the intersection depression. Within 4 km of the transform boundary, the dominant trend (000°) of the fissures and faults that disrupt the rise-generated volcanics is markedly oblique to the regional direction of sea floor spreading (120°). Since no evidence was found to suggest that these structures accommodate significant amounts of strike-slip displacement, they are taken to reflect a distortion of the EPR extensional tectonic regime by a transform generated shear couple. The floor of the Tamayo Transform valley in this area is inundated by mass-wasted sediment, and the principal transform displacement zone is characterized at the surface by a narrow (〈1.5 km) interval of fault scarps in sediment that trends parallel with the transform valley. Extrapolated to the west, this zone links with zones of transform deformation investigated during earlier submersible studies (CYAMEX and Pastouret, 1981). Evidence of low-level hydrothermal discharge was seen at one locality on the EPR axis and at another 8 km west of the axis at the edge of the zone of transform deformation.

Notes: Abstract A submersible study has been conducted in February–March 1978 at the axis of the East Pacific Rise near 21°N. The expedition CYAMEX, the first submersible program to be conducted on the East Pacific Rise, is part of the French-American-Mexican project RITA (Rivera-Tamayo), a 3-year study devoted to detailed geological and geophysical investigations of the East Pacific Rise Crest. On the basis of the 15 dives made by CYANA in the axial area of the Rise, a morphological and tectonic zonation can be established for this moderately-fast spreading center. A narrow, 0.6 to 1.2 km wide zone of extrusion (zone 1), dominated by young lava flows, is flanked by a highly fissured and faulted zone of extension (zone 2) with a width of 1 to 2 km. Further out, zone 3 is dominated by outward tilted blocks bounded by inward-facing fault scarps. Active or recent faults extend up to 12 km from the axis of extrusion of the East Pacific Rise. This represents the first determination from direct field evidence of the width of active tectonism associated with an accreting plate boundary. Massive sulfide deposits, made principally of zinc, copper and iron, were found close to the axis of the Rise. Other signs of the intense hydrothermal activity included the discovery of benthic fauna of gian size similar to that found at the axis of the Galapagos Rift. We emphasize the cyclic character of the volcanicity. The main characteristics of the geology of this segment of the East Pacific Rise can be explained by the thermal structure at depth below this moderately-fast spreading center. The geological observations are compatible with the existence of a shallow magma reservoir centered at the axis of the Rise with a half-width of the order of 10 km.

Notes: Abstract Sea Beam and Deep-Tow were used in a tectonic investigation of the fast-spreading (151 mm yr-1) East Pacific Rise (EPR) at 19°30′ S. Detailed surveys were conducted at the EPR axis and at the Brunhes/Matuyama magnetic reversal boundary, while four long traverses (the longest 96 km) surveyed the rise flanks. Faulting accounts for the vast majority of the relief. Both inward and outward facing fault scarps appear in almost equal numbers, and they form the horsts and grabens which compose the abyssal hills. This mechanism for abyssal hill formation differs from that observed at slow and intermediate spreading rates where abyssal hills are formed by back-tilted inward facing normal faults or by volcanic bow-forms. At 19°30′ S, systematic back tilting of fault blocks is not observed, and volcanic constructional relief is a short wavelength signal (less than a few hundred meters) superimposed upon the dominant faulted structure (wavelength 2–8 km). Active faulting is confined to within approximately 5–8 km of the rise axis. In terms of frequency, more faulting occurs at fast spreading rates than at slow. The half extension rate due to faulting is 4.1 mm yr-1 at 19°30′ S versus 1.6 mm yr-1 in the FAMOUS area on the Mid-Atlantic Ridge (MAR). Both spreading and horizontal extension are asymmetric at 19°30′ S, and both are greater on the east flank of the rise axis. The fault density observed at 19°30′ S is not constant, and zones with very high fault density follow zones with very little faulting. Three mechanisms are proposed which might account for these observations. In the first, faults are buried episodically by massive eruptions which flow more than 5–8 km from the spreading axis, beyond the outer boundary of the active fault zone. This is the least favored mechanism as there is no evidence that lavas which flow that far off axis are sufficiently thick to bury 50–150 m high fault scarps. In the second mechanism, the rate of faulting is reduced during major episodes of volcanism due to changes in the near axis thermal structure associated with swelling of the axial magma chamber. Thus the variation in fault spacing is caused by alternate episodes of faulting and volcanism. In the third mechanism, the rate of faulting may be constant (down to a time scale of decades), but the locus of faulting shifts relative to the axis. A master fault forms near the axis and takes up most of the strain release until the fault or fault set is transported into lithosphere which is sufficiently thick so that the faults become locked. At this point, the locus of faulting shifts to the thinnest, weakest lithosphere near the axis, and the cycle repeats.

Notes: [Auszug] In July and August 1982 we conducted an extensive seabeam study of the EPR with nearly continuous coverage of every spreading segment and transform fault between 820' N and 1830' N. The seabeam system aboard RV Thomas Washington insonifies the ocean floor with an array of 16 beams, each with a ...

Notes: [Auszug] High-resolution images covering large areas of the seafloor reveal numerous discontinuities along the mid-ocean ridge. These discontinuities occur at a range of scales (10–1,000 km) and define a fundamental segmentation of seafloor spreading centres. Some are transient; others persist for ...