ALBERT

Notes: Abstract Ultrahigh-pressure metamorphic (UHPM) rocks of the Kokchetav Massif of Kazakhstan contain metamorphic microdiamond and coesite inclusions inside rigid capsules such as garnet and zircon. Precambrian protoliths of the UHPM rocks were metamorphosed at around 530 Ma, at pressures of about 7 GPa, which suggests that crustal protoliths were subducted to depths of over 200 km. Primary UHPM minerals are poorly preserved due to partial obliteration by subsequent Barrovian overprint during exhumation and later collision events in Caledonian times. We report the results of detailed mapping of the Kokchetav Massif and use structural data to propose intrusion and exhumation mechanisms for the UHPM rocks. Detailed mapping revealed that many subvertical structures in the ultrahigh-pressure–high-pressure (UHP–HP) units were formed due to later folding. The primary structure appears to be subhorizontal and the total thickness of the UHP rocks is estimated at around 2 km. The first order structure is sandwich-like; that is, the UHP–HP units are separated from underlying low-P metamorphic rocks of the Daulet Series and from feebly metamorphosed to unmetamorphosed sedimentary strata on the top by subhorizontal faults. Kinematic indicators show top-to-the-south sense of shear along the top, and top-to-the-north displacement along the bottom boundaries. These shear senses, together with the observed metamorphic gradients, suggest that the thin UHPM sheet was extruded toward the north. We consider wedge extrusion to have been the most effective mechanism for the exhumation of the UHPM rocks.

Notes: Abstract In the first extensive, systematic study of inclusions in zircons from ultrahigh-pressure (UHP) and high-pressure (HP) metamorphic rocks of the Kokchetav Massif of Kazakhstan (separated from 232 rock samples from all representative lithologies and geographic regions), we identified graphite, quartz, garnet, phengite, phlogopite, rutile, albite, K-feldspar, amphibole, zoisite, kyanite, calcite, dolomite, apatite, monazite, omphacite and jadeite, as well as the diagnostic UHP metamorphic minerals (i.e. microdiamond and coesite) by laser Raman spectroscopy. In some instances, coesite + quartz and diamond + graphite occur together in a single rock sample, and inclusion aggregates also comprise polycrystalline diamond crystals overgrowing graphite. Secondary electron microscope and cathodoluminescence studies reveal that many zircons display distinct zonation textures, which comprise core and wide mantle, each with distinctive inclusion microassemblages. Pre-UHP metamorphic minerals such as graphite, quartz, phengite and apatite are common in the core, whereas diamond, coesite, garnet and jadeite occupy the mantle. The inclusions in core are irrelevant to the UHP metamorphism. The zircon core is of detrital or relatively low-grade metamorphic origin, whereas the mantle is of HP to UHP metamorphic origin. The zonal arrangement of inclusions and the presence of coesite and diamond without back-reaction imply that aqueous fluids were low to absent within the zircons during both prograde and retrograde metamorphism, and that the zircon preserves a prograde pressure–temperature record of the Kokchetav metamorphism which, elsewhere, has been more or less obliterated in the host rock.

Notes: Abstract High- to ultrahigh-pressure metamorphic (HP–UHPM) rocks crop out over 150 km along an east–west axis in the Kokchetav Massif of northern Kazakhstan. They are disposed within the Massif as a 2 km thick, subhorizontal pile of sheet-like nappes, predominantly composed of interlayered pelitic and psammitic schists and gneisses, amphibolite and orthogneiss, with discontinuous boudins and lenses of eclogite, dolomitic marble, whiteschist and garnet pyroxenite. On the basis of predominating lithologies, we subdivided the nappe group into four north-dipping, fault-bounded orogen-parallel units (I–IV, from base to top). Constituent metabasic rocks exhibit a systematic progression of metamorphic grades, from high-pressure amphibolite through quartz–eclogite and coesite–eclogite to diamond–eclogite facies. Coesite, diamond and other mineral inclusions within zircon offer the best means by which to clarify the regional extent of UHPM, as they are effectively sequestered from the effects of fluids during retrogression. Inclusion distribution and conventional geothermobarometric determinations demonstrate that the highest grade metamorphic rocks (Unit II: T = 780–1000°C, P = 37–60 kbar) are restricted to a medial position within the nappe group, and metamorphic grade decreases towards both the top (Unit III: T = 730–750°C, P = 11–14 kbar; Unit IV: T = 530°C, P = 7.5–9 kbar) and bottom (Unit I: T = 570–680°C; P = 7–13.5 kbar). Metamorphic zonal boundaries and internal structural fabrics are subhorizontal, and the latter exhibit opposing senses of shear at the bottom (top-to-the-north) and top (top-to-the-south) of the pile. The orogen-scale architecture of the massif is sandwich-like, with the HP–UHPM nappe group juxtaposed across large-scale subhorizontal faults, against underlying low P–T metapelites (Daulet Suite) at the base, and overlying feebly metamorphosed clastic and carbonate rocks (Unit V). The available structural and petrologic data strongly suggest that the HP–UHPM rocks were extruded as a sequence of thin sheets, from a root zone in the south toward the foreland in the north, and juxtaposed into the adjacent lower-grade units at shallow crustal levels of around 10 km. The nappe pile suffered considerable differential internal displacements, as the 2 km thick sequence contains rocks exhumed from depths of up to 200 km in the core, and around 30–40 km at the margins. Consequently, wedge extrusion, perhaps triggered by slab-breakoff, is the most likely tectonic mechanism to exhume the Kokchetav HP–UHPM rocks.

Notes: The ultrahigh- and high-pressure (UHP–HP) metamorphic belt of the Dabie Mountains, central China, formed by the Triassic continental subduction and collision, is divided into four metamorphic zones; from south to north, the greenschist facies zone, epidote amphibolite to amphibolite facies zone, quartz eclogite zone, and coesite eclogite zone, based on metabasite mineral assemblages. Most of the coesite-bearing eclogites consist mainly of garnet and omphacite with homogeneous compositions and have partially undergone hydration reactions to form clinopyroxene + plagioclase + calcic amphibole symplectites during amphibolite facies overprinting. However, the least altered eclogites sometimes contain garnet and omphacite that preserve compositional zoning patterns which may have originated during their growth at peak temperature conditions of ∼ 750 °C, suggesting a short duration of UHP metamorphic conditions and/or consequent rapid cooling during exhumation. Systematic investigation on peak metamorphic temperatures of coesite eclogite have revealed that, contrary to the general trend of metamorphic grade in the southern Dabie unit, the coesite eclogite zone shows rather flat thermal structure (T = 600 ± 50 °C) with the highest temperature reaching up to 850 °C and no northward increase in metamorphic temperature, which is opposed to the previous interpretations. This feature, along with the preservation of compositional zonation, implies complicated differential movement of each eclogite mass during UHP metamorphism and the return from the deeper subduction zone at mantle depths to the surface.

Notes: An eclogite (UHP303) formed at ∼ 700 °C and P 〉 4 GPa from the Dabie Shan ultrahigh-pressure (UHP) terrane and the same sample + 1.1 wt% K2O (UHK303) were used for re-equilibrium experimental studies at P = 2.6–3.2 GPa and T = 900–1000 °C, employing a piston cylinder apparatus, and at P = 3–7 GPa and T = 900–1200 °C, employing a 1000 ton uniaxial multi-anvil apparatus (SPI-1000). Run products of UHP303 are composed of garnet, sodic augite, with or without a SiO2 phase and phengite. Textural evidence indicates that the solidus lies between 900 and 1000 °C at 5 GPa, and above 1000 °C at 3 and 7 GPa for UHP303. The solidus temperature decreases to 1000 °C at 3–5 GPa and below 900 °C at 5 GPa in UHK303. Composition of rock-forming minerals of all run products were determined and compared with those of starting materials. Garnets of all run products have a relatively higher almandine + spessartine component (alm + sps 24–30 mol%) and lower grossular component (12–16) with constant pyrope component (58–61), compared to the starting garnet (grs16–26, alm 21–26, pyp 42–61). The stable Ca–Na pyroxenes are sodic augite rather than omphacite at T higher than 900 °C in the P = 3–7 GPa pressure range, and the Cpx compositional gap is completely closed. The K2O content of Ca–Na pyroxenes is a function of P and T, and serves as a potential barometer in the diamond-stability field. Sodium content in garnet is negligible. Using the proposed K2O content in Ca–Na pyroxene as a function of pressure, the maximum Kokchetav UHP condition is suggested to have been 7 GPa at T = 900 °C.