ISSN:
1573-4803
Source:
Springer Online Journal Archives 1860-2000
Topics:
Mechanical Engineering, Materials Science, Production Engineering, Mining and Metallurgy, Traffic Engineering, Precision Mechanics
Notes:
Abstract The fracture behaviour of centre-notched (0/± 45/0)S and (0/90)2S laminates with increasing notch length has been studied. Two test series have been investigated: specimens of constant width (W=20 mm) and small notch length (2a ⩽ 12 mm), and specimens with various notch lengths (5 ⩽ 2a ⩽ 35 mm) and a constant relative notch length (2a/W=0.5). An X-ray technique showed that the damage at the notch tip, which is formed at increasing load, consists mainly of subcracks parallel to the fibres of the constituent layers. The damage zone causes the crack opening displacement (COD) to deviate from the original linearity. TheK R curve concept has been applied assuming that the COD deviation from linearity is completely the result of original crack extension. This approach fails to describe the notch length effect, because a tangent point between theK R andK curves was not found and because of a strong dependency of the maximum fracture resistanceK Rmax on notch length. The fracture behaviour of 20 mm wide specimens could be explained with the point and average stress criteria, based on characteristic lengths which are independent of notch length. At various notch lengths at a constant 2a/W=0.5, however, the characteristic lengths increased with increasing notch length.
Type of Medium:
Electronic Resource
URL:
http://dx.doi.org/10.1007/BF00591477
Permalink
