ISSN:
1662-8985
Source:
Scientific.Net: Materials Science & Technology / Trans Tech Publications Archiv 1984-2008
Topics:
Mechanical Engineering, Materials Science, Production Engineering, Mining and Metallurgy, Traffic Engineering, Precision Mechanics
Notes:
This research studied robust design of composite hand for LTR (LCD glass TransferRobot). 1st DOE (Design of Experiment) was conducted to find out vital few Xs. 108 experimentswere performed and their results were statistically analyzed. Pareto chart analysis shows that thegeometric parameters (height and width of composite beam) are more important than materialparameters (E1, E2) or stacking sequence angle. Also, the stacking sequence of mid-layer is moreimportant than that of outer-layer. The main effect plots show that the maximum deflection of LTRhand is minimized with increasing height, width of beam and layer thickness. 2nd DOE was conductedto obtain RSM (Response Surface Method) equation. 25 experiments were conducted. The CCD(Central Composite Design) technique with four factors was used. The coefficient of determination(R2) for the calculated RSM equation was 0.989. Optimum design was conducted using the RSMequation. Multi-island genetic algorithm was used to optimize. Optimum values for beam height,beam width, layer thickness and beam length were 24.9mm, 186.6mm, 0.15mm and 2402.4mm,respectively. An approximate value of 0.77mm in deflection was expected to be maximized under theoptimum conditions. Six sigma robust design was conducted to find out guideline for control range ofdesign parameter. To acquire six sigma level reliability, the standard deviation of design parametershould be controlled within 2% of average design value
Type of Medium:
Electronic Resource
URL:
http://www.tib-hannover.de/fulltexts/2011/0528/01/40/transtech_doi~10.4028%252Fwww.scientific.net%252FAMR.33-37.1451.pdf
Permalink