ALBERT

Description: The model marine crenarchaeote 'Cenarchaeum symbiosum' is until now the only ammonia-oxidizing archaeon known from a marine sponge. Here, phylogenetic analyses based on the 16S rRNA and ammonia monooxygenase subunit A (amoA) genes revealed the presence of putative ammonia-oxidizing archaea (AOA) in a diverse range of sponges from the western Pacific, Caribbean and Mediterranean. amoA diversity was limited even between different oceans, with many of the obtained sequences (75.9%; n(total) = 83) forming a monophyletic, apparently sponge- (and coral-) specific lineage, analogous to those previously inferred from comparative 16S rRNA gene studies of sponge-associated microbes. The presence of AOA in sponge larvae, as detected by 16S rRNA and amoA PCR assays as well as by fluorescence in situ hybridization, suggests they are vertically transmitted and thus might be of importance for ammonia detoxification within the sponge.

Description: The discovery of metal-depositing hot springs on the sea floor, and especially their link to chemosynthetic life, was among the most compelling and significant scientific advances of the twentieth century. More than 300 sites of hydrothermal activity and sea-floor mineralization are known on the ocean floor. About 100 of these are sites of high-temperature venting and polymetallic sulfide deposits. They occur at mid-ocean ridges (65%), in back-arc basins (22%), and on submarine volcanic arcs (12%). Although high-temperature, 350°C, black smoker vents are the most recognizable features of sea-floor hydrothermal activity, a wide range of different styles of mineralization has been found. Different volcanic substrates, including mid-ocean ridge basalt, ultramafic intrusive rocks, and more evolved volcanic suites in both oceanic and continental crust, as well as temperature-dependent solubility controls, account for the main geochemical associations found in the deposits. Although end-member hydrothermal fluids mainly originate in the deep volcanic basement, the presence of sediments and other substrates can have a large effect on the compositions of the vent fluids. In arc and backarc settings, vent fluid compositions are broadly similar to those at mid-ocean ridges, but the arc magmas also supply a number of components to the hydrothermal fluids. The majority of known black smoker vents occur on fast-spreading mid-ocean ridges, but the largest massive sulfide deposits are located at intermediate- and slow-spreading centers, at ridge-axis volcanoes, in deep backarc basins, and in sedimented rifts adjacent to continental margins. The range of deposit sizes in these settings is similar to that of ancient volcanic-associated massive sulfide (VMS) deposits. Detailed mapping, and in some cases drilling, indicates that a number of deposits contain 1 to 5 million tons (Mt) of massive sulfide (e.g., TAG hydrothermal field on the Mid-Atlantic Ridge, deposits of the Galapagos Rift, and at 13°N on the East Pacific Rise). Two sediment-hosted deposits, at Middle Valley on the Juan de Fuca Ridge and in the Atlantis II Deep of the Red Sea, are much larger (up to 15 and 90 Mt, respectively). In the western Pacific, high-temperature hydrothermal systems occur mainly at intraoceanic back-arc spreading centers (e.g., Lau basin, North Fiji basin, Mariana trough) and in arc-related rifts at continental margins (e.g., Okinawa trough). In contrast to the mid-ocean ridges, convergent margin settings are characterized by a range of different crustal thicknesses and compositions, variable heat flow regimes, and diverse magma types. These variations result in major differences in the compositions and isotopic systematics of the hydrothermal fluids and the mineralogy and bulk compositions of the associated mineral deposits. Intraoceanic back-arc basin spreading centers host black smoker vents that, for the most part, are very similar to those on the mid-ocean ridges. However, isotopic data from both the volcanic rocks and the sulfide deposits highlight the importance of subduction recycling in the origin of the magmas and hydrothermal fluids. Back-arc rifts in continental margin settings are typically sediment-filled basins, which derive their sediment load from the adjacent continental shelf. This has an insulating effect that enhances the high heat flow associated with rifting of the continental crust and also helps to preserve the contained sulfide deposits. Large hydrothermal systems have developed where initial rifting of continental crust or locally thickened arc crust has formed large calderalike sea-floor depressions, similar to those that contained major VMS-forming systems in the geologic record. Hydrothermal vents also occur in the summit calderas of submarine volcanoes at the volcanic fronts of arcs. However, this contrasts with the interpreted settings of most ancient VMS deposits, which are considered to have formed mainly during arc rifting. Hydrothermal vents associated with arc volcanoes show clear evidence of the direct input of magmatic volatiles, similar to magmatic-hydrothermal systems in subaerial volcanic arcs. Several compelling examples of submarine epithermal-style mineralization, including gold-base metal veins, have been found on submarine arc volcanoes,and this type of mineralization may be more common than is presently recognized. Mapping and sampling of the sea floor has dramatically improved geodynamic models of different submarine volcanic and tectonic settings and has helped to establish a framework for the characterization of many similar ancient terranes. Deposits forming at convergent margins are considered to be the closest analogs of ancient VMS. However, black smokers on the mid-ocean ridges continue to provide critically important information about metal transport and deposition in sea-floor hydrothermal systems of all types. Ongoing sea-floor exploration in other settings is providing clues to the diversity of mineral deposit types that occur in different environments and the conditions that are favorable for their formation.

Description: Raúl-Condestable is a 〉32 million metric ton (Mt) iron oxide-copper-gold (IOCG) deposit located on the Peruvian coast, 90 km south of Lima. The ore occurs as veins, replacement “mantos,” and disseminations consisting of a chalcopyrite-pyrite-pyrrhotite-magnetite-amphibole mineral association. The geology of the studied area comprises a series of superposed volcanic edifices of Late Jurassic to Early Cretaceous age, which are part of a larger volcanic island to continental arc system. Particularly good exposures of the tilted host sequence allow the mapping of the Raúl-Condestable IOCG deposit in a nearly complete oblique cross section, from its associated volcanic edifice down to a paleodepth of about 6 km. U-Pb zircon ages indicate that in the deposit area felsic magmatic activity took place between 116.7 ± 0.4 and 114.5 ± 1 Ma, defining a new Raúl-Condestable superunit, the oldest so far, of the Peruvian Coastal batholith. This superunit is located west of the main part of the batholith and includes a dacite-andesite volcanic dome and a subvolcanic quartz-diorite porphyry sill-dike complex that were emplaced at 116.7 ± 0.4 and 116.4 ±0.3 Ma, respectively, followed by tonalite stocks and dikes emplaced between 115.1 ± 0.4 and 114.5 ± 1 Ma. All these rocks contain hornblende and/or biotite but no pyroxene and correspond to silica- and water-rich magmas following a calcic differentiation trend. Hf isotope data on zircons (εHf(115 Ma) = 5.2–7.5) and Pb isotope data on whole rock, combined with lithogeochemical results, suggest that magmas were generated by partial melting of the upper mantle, enriched through hydrous metasomatism and/or melting of subducted pelagic sediments. The lack of zircon inheritance suggests that there was no direct involvement of continental crust. The Raúl-Condestable IOCG deposit is connected in space and time with the magmatism of the Raúl-Condestable superunit. The mineralization was emplaced in the core of the dacite-andesite volcanic dome at a paleodepth of 2 to 3 km, surrounding two tonalitic intrusions formed at 115.1 ± 0.4 and 114.8 ± 0.4 Ma. The U-Pb age of hydrothermal titanite from IOCG veins at 115.2 ± 0.3 Ma indicates that the mineralization was coeval with (or more probably just followed) the emplacement of the tonalites. Re-Os geochronology on molybdenite did not yield reliable ages due to apparent Re loss. Copper ore is associated with a zoned alteration pattern, which surrounds the tonalite intrusions. It consists of a core of biotite alteration and quartz stockwork, grading outward to actinolite (±magnetite, ±chlorite, ±titanite, ±scapolite, ±albite, ±epidote) and upward to sericite + Fe chlorite alteration. An upper distal alteration halo consisting of hematite-chlorite surrounds the sericite + Fe chlorite and actinolite alterations laterally. Most of the ore is spatially associated with the actinolite alteration and, to a lesser extent, with the sericite + Fe chlorite alteration. The results of this study confirm that the 110 to 120 Ma age range was a productive time period for Andean IOCG deposits. The characterization of the hydrous intermediate magmatism related to the mineralization, as well as the subvolcanic position of the deposit and its related alteration pattern provides further criteria that may be used when exploring for IOCG deposits in a convergent plate tectonic setting.

Description: Brothers volcano, which is part of the active Kermadec arc, northeast of New Zealand, forms an elongate edifice 13 km long by 8 km across that strikes northwest-southeast. The volcano has a caldera with a basal diameter of ~3 km and a floor at 1,850 m below sea level, surrounded by 290- to 530-m-high walls. A volcanic cone of dacite rises 350 m from the caldera floor and partially coalesces with the southern caldera wall. Three hydrothermal sites have been located: on the northwest caldera wall, on the southeast caldera wall, and on the dacite cone. Multiple hydrothermal plumes rise ~750 m through the water column upward from the caldera floor, originating from the northwest caldera walls and atop the cone, itself host to three separate vent fields (summit, upper flank, northeast flank). In 1999, the cone site had plumes with relatively high concentrations of gas with a ΔpH of −0.27 relative to seawater (proxy for CO2 + S gases), dissolved H2S up to 4,250 nM, high concentrations of particulate Cu (up to 3.4 nM), total dissolvable Fe (up to 4,720 nM), total dissolvable Mn (up to 260 nM) and Fe/Mn values of 4.4 to 18.2. By 2002, plumes from the summit vent field had much lower particulate Cu (0.3 nM), total dissolvable Fe (175 nM), and Fe/Mn values of 0.8 but similar ΔpH (−0.22) and higher H2S (7,000 nM). The 1999 plume results are consistent with a magmatic fluid component with the concentration of Fe suggesting direct exsolution of a liquid brine, whereas the much lower concentrations of metals but higher overall gas contents in the 2002 plumes likely reflect subsea-floor phase separation. Plumes above the northwest caldera site are chemically distinct, and their compositions have not changed over the same 3-year interval. They have less CO2 (ΔpH of −0.09), no detectable H2S, total dissolved Fe of 955 nM, total dissolved Mn of 150 nM, and Fe/Mn of 6.4. An overall increase in 3He/4He values in the plumes from R/RA = 6.1 in 1999 to 7.2 in 2002 is further consistent with a magmatic pulse perturbing the system. The northwest caldera site is host to at least two large areas (~600 m by at least 50 m) of chimneys and sub-cropping massive sulfide. One deposit is partially buried by sediment near the caldera rim at ~1,450 m, whereas the other crops out along narrow, fault-bounded ledges between ~1,600 and 1,650 m. Camera tows imaged active 1- to 2-m-high black smoker chimneys in the deeper zone together with numerous 1- to 5-m-high inactive spires, abundant sulfide talus, partially buried massive sulfides, and hydrothermally altered volcanic rocks. 210Pb/226Ra dating of one chimney gives an age of 27 ± 6 years; 226Ra/Ba dating of other mineralization indicates ages up to 1,200 years. Formation temperatures derived from Δ34Ssulfate-sulfide mineral pairs are 245° to 295° for the northwest caldera site, 225° to 260°C for the southeast caldera and ~260° to 305°C for the cone. Fluid inclusion gas data suggest subsea-floor phase separation occurred at the northwest caldera site. Alteration minerals identified include silicates, silica polymorphs, sulfates, sulfides, Fe and Mn oxide and/or oxyhydroxides, and native sulfur, which are consistent with precipitation at a range of temperatures from fluids of different compositions. An advanced argillic assemblage of illite + amorphous silica + natroalunite + pyrite + native S at the cone site, the occurrence of chalcocite + covellite + bornite + iss + chalcopyrite + pyrite in sulfide samples from the southeast caldera site, and veins of enargite in a rhyodacitic sample from the northwest caldera site are indicative of high-sulfidation conditions similar to those of subaerial magmatic-hydrothermal systems. The northwest caldera vent site is a long-lived hydrothermal system that is today dominated by evolved sea-water but has had episodic injections of magmatic fluid. The southeast caldera site represents the main upflow of a relatively well established magmatic-hydrothermal system on the sea floor where sulfide-rich chimneys are extant. The cone site is a nascent magmatic-hydrothermal system where crack zones localize upwelling acidic waters. Each of these different vent sites represents diverse parts of an evolving hydrothermal system, any one of which may be typical of submarine volcanic arcs.