ALBERT

Description: Novel species of microfungi described in the present study include the following from Australia: Bagadiella victoriae and Bagadiella koalae on Eucalyptus spp., Catenulostroma eucalyptorum on Eucalyptus laevopinea, Cercospora eremochloae on Eremochloa bimaculata, Devriesia queenslandica on Scaevola taccada, Diaporthe musigena on Musa sp., Diaporthe acaciigena on Acacia retinodes, Leptoxyphium kurandae on Eucalyptus sp., Neofusicoccum grevilleae on Grevillea aurea, Phytophthora fluvialis from water in native bushland, Pseudocercospora cyathicola on Cyathea australis, and Teratosphaeria mareebensis on Eucalyptus sp. Other species include Passalora leptophlebiae on Eucalyptus leptophlebia (Brazil), Exophiala tremulae on Populus tremuloides and Dictyosporium stellatum from submerged wood (Canada), Mycosphaerella valgourgensis on Yucca sp. (France), Sclerostagonospora cycadis on Cycas revoluta (Japan), Rachicladosporium pini on Pinus monophylla (Netherlands), Mycosphaerella wachendorfiae on Wachendorfia thyrsifolia and Diaporthe rhusicola on Rhus pendulina (South Africa). Novel genera of hyphomycetes include Noosia banksiae on Banksia aemula (Australia), Utrechtiana cibiessia on Phragmites australis (Netherlands), and Funbolia dimorpha on blackened stem bark of an unidentified tree (USA). Morphological and culture characteristics along with ITS DNA barcodes are provided for all taxa.

Description: Four different genera of diaporthalean coelomycetous fungi associated with leaf spots of tree hosts are morphologically treated and phylogenetically compared based on the DNA sequence data of the large subunit nuclear ribosomal DNA gene (LSU) and the internal transcribed spacers and 5.8S rRNA gene of the nrDNA operon.\nThese include two new Australian genera, namely Auratiopycnidiella, proposed for a leaf spotting fungus occurring on Tristaniopsis laurina in New South Wales, and Disculoides, proposed for two species occurring on leaf spots of Eucalyptus leaves in Victoria. Two new species are described in Aurantiosacculus, a hitherto monotypic genus associated with leaf spots of Eucalyptus in Australia, namely A. acutatus on E. viminalis, and A. eucalyptorum on E. globulus, both occurring in Tasmania. Lastly, an epitype specimen is designated for Erythrogloeum hymenaeae, the type species of the genus Erythrogloeum, and causal agent of a prominent leaf spot disease on Hymenaea courbaril in South America. All four genera are shown to be allied to Diaporthales, although only Aurantiosacculus (Cryphonectriaceae) could be resolved to family level, the rest being incertae sedis.

Description: Novel species of microfungi described in the present study include the following from Australia: Bagadiella victoriae and Bagadiella koalae on Eucalyptus spp., Catenulostroma eucalyptorum on Eucalyptus laevopinea, Cercospora eremochloae on Eremochloa bimaculata, Devriesia queenslandica on Scaevola taccada, Diaporthe musigena on Musa sp., Diaporthe acaciigena on Acacia retinodes, Leptoxyphium kurandae on Eucalyptus sp., Neofusicoccum grevilleae on Grevillea aurea, Phytophthora fluvialis from water in native bushland, Pseudocercospora cyathicola on Cyathea australis, and Teratosphaeria mareebensis on Eucalyptus sp. Other species include Passalora leptophlebiae on Eucalyptus leptophlebia (Brazil), Exophiala tremulae on Populus tremuloides and Dictyosporium stellatum from submerged wood (Canada), Mycosphaerella valgourgensis on Yucca sp. (France), Sclerostagonospora cycadis on Cycas revoluta (Japan), Rachicladosporium pini on Pinus monophylla (Netherlands), Mycosphaerella wachendorfiae on Wachendorfia thyrsifolia and Diaporthe rhusicola on Rhus pendulina (South Africa).\nNovel genera of hyphomycetes include Noosia banksiae on Banksia aemula (Australia), Utrechtiana cibiessia on Phragmites australis (Netherlands), and Funbolia dimorpha on blackened stem bark of an unidentified tree (USA).\nMorphological and culture characteristics along with ITS DNA barcodes are provided for all taxa.

Description: The Agricultural Model Intercomparison and Improvement Project (AgMIP) is a major international effort linking the climate, crop, and economic modeling communities with cutting-edge information technology to produce improved crop and economic models and the next generation of climate impact projections for the agricultural sector. The goals of AgMIP are to improve substantially the characterization of world food security due to climate change and to enhance adaptation capacity in both developing and developed countries. Analyses of the agricultural impacts of climate variability and change require a transdisciplinary effort to consistently link state-of-the-art climate scenarios to crop and economic models. Crop model outputs are aggregated as inputs to regional and global economic models to determine regional vulnerabilities, changes in comparative advantage, price effects, and potential adaptation strategies in the agricultural sector. Climate, Crop Modeling, Economics, and Information Technology Team Protocols are presented to guide coordinated climate, crop modeling, economics, and information technology research activities around the world, along with AgMIP Cross-Cutting Themes that address uncertainty, aggregation and scaling, and the development of Representative Agricultural Pathways (RAPs) to enable testing of climate change adaptations in the context of other regional and global trends. The organization of research activities by geographic region and specific crops is described, along with project milestones. Pilot results demonstrate AgMIP's role in assessing climate impacts with explicit representation of uncertainties in climate scenarios and simulations using crop and economic models. An intercomparison of wheat model simulations near Obregn, Mexico reveals inter-model differences in yield sensitivity to [CO2] with model uncertainty holding approximately steady as concentrations rise, while uncertainty related to choice of crop model increases with rising temperatures. Wheat model simulations with midcentury climate scenarios project a slight decline in absolute yields that is more sensitive to selection of crop model than to global climate model, emissions scenario, or climate scenario downscaling method. A comparison of regional and national-scale economic simulations finds a large sensitivity of projected yield changes to the simulations' resolved scales. Finally, a global economic model intercomparison example demonstrates that improvements in the understanding of agriculture futures arise from integration of the range of uncertainty in crop, climate, and economic modeling results in multi-model assessments.

Description: We have produced a variety of superconducting transition edge sensor array designs for microcalorimetric detection of x-rays. Arrays are characterized with a time division SQUID multiplexer such that greater than 10 devices from an array can be measured in the same cooldown. Designs include kilo pixel scale arrays of relatively small sensors (-75 micron pitch) atop a thick metal heatsinking layer as well as arrays of membrane-isolated devices on 250 micron and up to 600 micron pitch. We discuss fabrication and performance of microstripline wiring at the small scales achieved to date. We also address fabrication issues with reduction of absorber contact area in small devices.

Description: In this paper we present the progress made at SRON in the read-out of GSFC x-ray transition-edge sensor (TES) micro-calorimeters in the frequency domain. The experiments reported so far, whose aim was to demonstrate an energy resolution of 2eV at 6 keV with a TES acting as a modulator, were carried out at frequencies below 700 kHz using a standard flux locked loop (FLL) SQUID read-out scheme. The TES read-out suffered from the use of sub-optimal circuit components, large parasitic inductances, low quality factor resonators and poor magnetic field shielding. We have developed a novel experimental set-up, which allows us to test several read-out schemes in a single cryogenic run. In this set-up, the TES pixels are coupled via superconducting transformers to 18 high-Q lithographic LC filters with resonant frequencies ranging between 2 and 5 MHz. The signal is amplified by a two-stage SQUID current sensor and baseband feedback is used to overcome the limited SQUID dynamic range. We study the single pixel performance as a function of TES bias frequency, voltage and perpendicular magnetic field.

Description: The quality of the quantitative spectral data collected by an imaging spectrometer instrument is critically dependent upon the accuracy of the spectral and radiometric calibration of the system. In order for the collected spectra to be scientifically useful, the calibration of the instrument must be precisely known not only prior to but during data collection. Thus, in addition to a rigorous in-lab calibration procedure, the airborne instruments designed and built by the NASA/JPL Imaging Spectroscopy Group incorporate an on board calibrator (OBC) system with the instrument to provide auxiliary in-use system calibration data. The output of the OBC source illuminates a target panel on the backside of the foreoptics shutter both before and after data collection. The OBC and in-lab calibration data sets are then used to validate and post-process the collected spectral image data. The resulting accuracy of the spectrometer output data is therefore integrally dependent upon the stability of the OBC source. In this paper we describe the design and application of the latest iteration of this novel device developed at NASA/JPL which integrates a halogen-cycle source with a precisely designed fiber coupling system and a fiber-based intensity monitoring feedback loop. The OBC source in this Airborne Testbed Spectrometer was run over a period of 15 hours while both the radiometric and spectral stabilities of the output were measured and demonstrated stability to within 1% of nominal.

Description: At SRON we are studying the performance of a Goddard Space Flight Center single pixel TES microcalorimeter operated in an AC bias configuration. For x-ray photons at 6 keV the pixel shows an x-ray energy resolution Delta E(sub FWHM) = 3.7 eV, which is about a factor 2 worse than the energy resolution observed in an identical DC-biased pixel. In order to better understand the reasons for this discrepancy we characterized the detector as a function of temperature, bias working point and applied perpendicular magnetic field. A strong periodic dependency of the detector noise on the TES AC bias voltage is measured. We discuss the results in the framework of the recently observed weak-link behaviour of a TES microcalorimeter.

Description: The Soft X-ray Spectrometer (SXS) instrument on the Astro-H observatory is based on a 36 pixel x-ray calorimeter array cooled to 50 mK in a sophisticated spaceflight cryostat. The SXS is a true spatial-spectral instrument, where each spatially discrete pixel functions as a high-resolution spectrometer. Here we discuss the SXS detector subsystem that includes the detector array, the anticoincidence detector, the first stage amplifiers, the thermal and mechanical staging of the detector, and the cryogenic bias electronics. The design of the SXS detector subsystem has significant heritage from the Suzaku/XRS instrument but has some important modifications that increase performance margins and simplify the focal plane assembly. Notable improvements include x-ray absorbers with significantly lower heat capacity, improved load resistors, improved thermometry, and a decreased sensitivity to thermal radiation. These modifications have yielded an energy resolution of 3.5-4.0 eV FWHM at 6 keV for representative devices in the laboratory, giving considerable margin against the 7 eV instrument requirement. We expect similar performance in flight

Description: We have produced a variety of superconducting transition edge sensor array designs for microcalorimetric detection of x-rays. Designs include kilopixel scale arrays of relatively small sensors (~75 micron pitch) atop a thick metal heatsinking layer as well as arrays of membrane-isolated devices on 250 micron pitch and smaller arrays of devices up to 600 micron pitch. We discuss the fabrication techniques used for each type of array focusing on unique aspects where processes vary to achieve the particular designs and required device parameters. For example, we evaluate various material combinations in the production of the thick metal heatsinking, including superconducting and normal metal adhesion layers. We also evaluate the impact of added heatsinking on the membrane isolated devices as it relates to basic device parameters. Arrays can be characterized with a time division SQUID multiplexer such that greater than 10 devices from an array can be measured in the same cooldown. Device parameters can be measured simultaneously so that environmental events such as thermal drifts or changes in magnetic fields can be controlled. For some designs, we will evaluate the uniformity of parameters impacting the intrinsic performance of the microcalorimeters under bias in these arrays and assess the level of thermal crosstalk.