ISSN:
0947-5117
Keywords:
Chemistry
;
Polymer and Materials Science
Source:
Wiley InterScience Backfile Collection 1832-2000
Topics:
Mechanical Engineering, Materials Science, Production Engineering, Mining and Metallurgy, Traffic Engineering, Precision Mechanics
Description / Table of Contents:
Production and properties of nitrogen alloyed, corrosion resistant steels and special steels with low carbon contentsAlloying with nitrogen has favourable influence in particular on the mechanical properties of CrNiMo steels (X 2 CrNiMoN 17 12, materials No. 1.4406, X 2 CrNiMoN 17 13 5, materials No. 1.4439 und X 2 CrNiMoN 22 5, materials No. W.-Nr. 1.4462). This comes to bear when ambient temperature and low temperature strength and toughness are concerned. With respect to the corrosion behaviour the data concerning the effect of nitrogen are contradictory. It has become clear that nitrogen improves pitting corrosion resistance; this applies, however, only to pit initiation but not to pit growth. Stress corrosion cracking is not delayed by nitrogen but different results have been obtained with different media: while the duplex steel X 2 CrNiMoN 22 5 is attacked considerably faster than the corresponding nitrogen-free steel in 42% boiling magnesium chloride solution the time-to-failure of both steels are comparable in 30% boiling MgCl2-solution. The nitrogen alloyed steels can be welded by all known welding procedures, provided fully austenitic welding rods are used.
Notes:
Durch Zusatz von Stickstoff werden vor allem die mechanischen Eigenschaften von CrNiMo-Stählen (X 2 CrNiMoN 17 12, W.-Nr. 1.4406, X 2 CrNiMoN 17 13 5, W.-Nr. 1.4439 und X 2 CrNiMoN 22 5, W.-Nr. 1.4462) günstig beeinflußt. Das gilt hinsichtlich der Festigkeit bei Raumtemperatur und der Tieftemperaturzähigkeit, die deutlich verbessert werden. Im Hinblick auf das Korrosionsverhalten sind die Aussagen über die Wirkung von Stickstoffzusätzen widersprüchlich. Eindeutig steht fest, daß durch den Stickstoff die Widerstandsfähigkeit gegen Lochkorrosion verbessert wird; das gilt jedoch nur für die Lochkeimbildung, nicht hingegen für das Lochwachstum. Die Spannungsrißkorrosion wird durch Stickstoff nicht verzögert, doch gibt es dabei Unterschiede je nach Prüfmedium: So wird der zweiphasige Stahl X 2 CrNiMoN 22 5 in 42%iger siedender MgCl2-Lösung deutlich schneller angegriffen als der entsprechende stickstofffreie Stahl, während in 30%iger siedender MgCl2-Lösung die Standzeiten beider Stähle vergleichbar sind. Die stickstofflegierten Stähle sind mit allen bekannten Verfahren schweißbar, wobei vollaustentitische Zusatzwerkstoffe zu empfehlen sind.
Additional Material:
3 Ill.
Type of Medium:
Electronic Resource
URL:
http://dx.doi.org/10.1002/maco.19920430505
Permalink