ALBERT

Description: In this paper, we present a scenario-based approach for tsunami hazard assessment for the city and harbour of Sines – Portugal, one of the test-sites of project ASTARTE. Sines holds one of the most important deep-water ports which contains oil-bearing, petrochemical, liquid bulk, coal and container terminals. The port and its industrial infrastructures are facing the ocean southwest towards the main seismogenic sources. This work considers two different seismic zones: the Southwest Iberian Margin and the Gloria Fault. Within these two regions, we selected a total of six scenarios to assess the tsunami impact at the test site. The tsunami simulations are computed using NSWING a Non-linear Shallow Water Model With Nested Grids. In this study, the static effect of tides is analysed for three different tidal stages MLLW (mean lower low water), MSL (mean sea level) and MHHW (mean higher high water). For each scenario, inundation is described by maximum values of wave height, flow depth, drawback, runup and inundation distance. Synthetic waveforms are computed at virtual tide gauges at specific locations outside and inside the harbour. The final results describe the impact at Sines test site considering the single scenarios at mean sea level, the aggregate scenario and the influence of the tide on the aggregate scenario. The results confirm the composite of Horseshoe and Marques Pombal fault as the worst case scenario. It governs the aggregate scenario with about 60 % and inundates an area of 3.5 km2.

Description: This paper is a contribution to a better understanding of the tsunamigenic potential of large submarine earthquakes. Here, we analyze the tsunamigenic potential of large earthquakes which have occurred worldwide with magnitudes around Mw = 7.0 and greater during a period of 1 year, from June 2013 to June 2014. The analysis involves earthquake model evaluation, tsunami numerical modeling, and sensors' records analysis in order to confirm the generation of a tsunami (or lack thereof) following the occurrence of an earthquake. We also investigate and discuss the sensitivity of tsunami generation to the earthquake parameters recognized to control tsunami occurrence, including the earthquake location, magnitude, focal mechanism and fault rupture depth. Through this analysis, we attempt to understand why some earthquakes trigger tsunamis and others do not, and how the earthquake source parameters are related to the potential of tsunami generation. We further discuss the performance of tsunami warning systems in detecting tsunamis and disseminating the alerts. A total of 23 events, with magnitudes ranging from Mw = 6.7 to Mw = 8.1, have been analyzed. This study shows that about 39 % of the analyzed earthquakes caused tsunamis that were recorded by different sensors with wave amplitudes varying from a few centimeters to about 2 m. Tsunami numerical modeling shows good agreement between simulated waveforms and recorded waveforms, for some events. On the other hand, simulations of tsunami generation predict that some of the events, considered as non-tsunamigenic, caused small tsunamis. We find that most generated tsunamis were caused by shallow earthquakes (depth 〈 30 km) and thrust faults that took place on/near the subduction zones. The results of this study can help the development of modified and improved versions of tsunami decision matrixes for various oceanic domains.

Description: This paper is a contribution to a better understanding of tsunamigenic potential from large submarine earthquakes. Here, we analyse the tsunamigenic potential of large earthquakes occurred worldwide with magnitudes around Mw 7.0 and greater, during a period of 1 year, from June 2013 to June 2014. The analysis involves earthquake model evaluation, tsunami numerical modelling, and sensors' records analysis in order to confirm the generation or not of a tsunami following the occurrence of an earthquake. We also investigate and discuss the sensitivity of tsunami generation to the earthquake parameters recognized to control the tsunami occurrence, including the earthquake magnitude, focal mechanism and fault rupture depth. A total of 23 events, with magnitudes ranging from Mw 6.7 to Mw 8.1 and hypocenter depths varying from 10 up to 585 km, have been analyzed in this study. Among them, 52% are thrust faults, 35% are strike-slip faults, and 13% are normal faults. Most analyzed events have been occurred in the Pacific Ocean. This study shows that about 39% of the analyzed earthquakes caused tsunamis that were recorded by different sensors with wave amplitudes varying from few centimetres to about 2 m. Some of them caused inundations of low-lying coastal areas and significant damages in harbours. On the other hand, tsunami numerical modeling shows that some of the events, considered as non-tsunamigenic, might trigger small tsunamis that were not recorded due to the absence of sensors in the near-field areas. We also find that the tsunami generation is mainly dependent of the earthquake focal mechanism and other parameters such as the earthquake hypocenter depth and the magnitude. The results of this study can help on the compilation of tsunami catalogs.

Description: The devastating impact of the Sumatra tsunami of 26 December 2004, raised the question for scientists of how to forecast a tsunami threat. In 2005, the IOC-UNESCO XXIII assembly decided to implement a global tsunami warning system to cover the regions that were not yet protected, namely the Indian Ocean, the Caribbean and the North East Atlantic, the Mediterranean and connected seas (the NEAM region). Within NEAM, the Gulf of Cadiz is the more sensitive area, with an important record of devastating historical events. The objective of this paper is to present a preliminary design for a reliable tsunami detection network for the Gulf of Cadiz, based on a network of sea-level observatories. The tsunamigenic potential of this region has been revised in order to define the active tectonic structures. Tsunami hydrodynamic modeling and GIS technology have been used to identify the appropriate locations for the minimum number of sea-level stations. Results show that 3 tsunameters are required as the minimum number of stations necessary to assure an acceptable protection to the large coastal population in the Gulf of Cadiz. In addition, 29 tide gauge stations could be necessary to fully assess the effects of a tsunami along the affected coasts of Portugal, Spain and Morocco.

Description: In this paper, we present a deterministic approach to tsunami hazard assessment for the city and harbour of Sines, Portugal, one of the test sites of project ASTARTE (Assessment, STrategy And Risk Reduction for Tsunamis in Europe). Sines has one of the most important deep-water ports, which has oil-bearing, petrochemical, liquid-bulk, coal, and container terminals. The port and its industrial infrastructures face the ocean southwest towards the main seismogenic sources. This work considers two different seismic zones: the Southwest Iberian Margin and the Gloria Fault. Within these two regions, we selected a total of six scenarios to assess the tsunami impact at the test site. The tsunami simulations are computed using NSWING, a Non-linear Shallow Water model wIth Nested Grids. In this study, the static effect of tides is analysed for three different tidal stages: MLLW (mean lower low water), MSL (mean sea level), and MHHW (mean higher high water). For each scenario, the tsunami hazard is described by maximum values of wave height, flow depth, drawback, maximum inundation area and run-up. Synthetic waveforms are computed at virtual tide gauges at specific locations outside and inside the harbour. The final results describe the impact at the Sines test site considering the single scenarios at mean sea level, the aggregate scenario, and the influence of the tide on the aggregate scenario. The results confirm the composite source of Horseshoe and Marques de Pombal faults as the worst-case scenario, with wave heights of over 10 m, which reach the coast approximately 22 min after the rupture. It dominates the aggregate scenario by about 60 % of the impact area at the test site, considering maximum wave height and maximum flow depth. The HSMPF scenario inundates a total area of 3.5 km2.