ISSN:
0021-8995
Keywords:
Chemistry
;
Polymer and Materials Science
Source:
Wiley InterScience Backfile Collection 1832-2000
Topics:
Chemistry and Pharmacology
,
Mechanical Engineering, Materials Science, Production Engineering, Mining and Metallurgy, Traffic Engineering, Precision Mechanics
,
Physics
Notes:
Pure isotactic polystyrene (iPS, Mw = 8.89 × 104, Mw/Mn = 4.89) and its blends with an atactic polystyrene (aPS, Mw = 3.9 × 105, Mw/Mn 〈 1.13) were subjected to draw by solid state coextrusion at 127°C within polyethylene. The content of amorphous iPS in these blends was varied from 100 to 24.4 wt %. The extent of draw-induced crystallization was found to depend on the draw ratio and on iPS concentration. The blend with 24.4% iPS was coextruded in two stages. The highest effective draw ratio (EDR) was 7.6 and 13.7 for one- and two-stage draw, respectively. The highest crystallinity of 33.2% was obtained for pure iPS at the maximum EDR of 7.6. Considerable crystallinity was induced in blends, requiring successively higher draw ratio to reach similar crystallinity with increased aPS content. The tensile modulus increased from 1.5 to 3.2 GPa, independent of iPS concentration. Thermal shrinkage results indicate that the elastic recovery of draw in the blends is near quantitative for an EDR 〈 8. For pure iPS, extrudate elastic recovery was dramatically altered by the draw-induced crystallinity.
Additional Material:
7 Ill.
Type of Medium:
Electronic Resource
URL:
http://dx.doi.org/10.1002/app.1981.070260723
Permalink