ALBERT

Description: Logs collected while drilling measured density in situ, through the accretionary prism and decollement zone of the northern Barbados Ridge. Consolidation tests relate void ratio (derived from density) to effective stress and predict a fluid pressure profile, assuming that the upper 100 m of the prism is at a hydrostatic pressure gradient. The calculated fluid pressure curve rises to 〉90% of lithostatic below thrusts in the prism, presumably due to the increase in overburden and lateral tectonic loading. Thin (0.5–2.0 m) intervals of anomalously low density and resistivity in the logs through the basal decollement zone suggest dilation and perhaps hydrofracturing. A peak in hydraulic head in the upper half of the decollement zone requires lateral influx of fluid, a conclusion consistent with previous geochemical studies. Although the calculated fluid-pressure profile is model dependent, its inherent character ties to major structural features.

Description: Logs collected while drilling measured density in situ, through the accretionary prism and decollement zone of the northern Barbados Ridge. Consolidation tests relate void ratio (derived from density) to effective stress and predict a fluid pressure profile, assuming that the upper 100 m of the prism is at a hydrostatic pressure gradient. The calculated fluid pressure curve rises to 〉90% of lithostatic below thrusts in the prism, presumably due to the increase in overburden and lateral tectonic loading. Thin (0.5–2.0 m) intervals of anomalously low density and resistivity in the logs through the basal decollement zone suggest dilation and perhaps hydrofracturing. A peak in hydraulic head in the upper half of the decollement zone requires lateral influx of fluid, a conclusion consistent with previous geochemical studies. Although the calculated fluid-pressure profile is model dependent, its inherent character ties to major structural features.

Description: The interrelation between deformation styles and behavior of fluids in accretionary prisms is under debate, particularly the possibility that overpressuring within the basal decollement may enable mechanical decoupling of the prism from the subducting material. Anisotropy of magnetic susceptibility (AMS) data from sediments spanning the basal decollement of the Barbados accretionary prism show a striking progression across this structure that strongly supports the hypothesis that it is markedly overpressured. In the accretionary prism, above the decollement, the minimum AMS axes are subhorizontal and oriented nearly east-west, whereas the maximum AMS axes are oriented nearly north-south and shallowly inclined. At the top of the decollement, the minimum AMS axes orientations abruptly change to nearly vertical; this orientation is maintained throughout the decollement and in the underthrust sediments below. The AMS orientations in the prism sediments above the decollement are consistent with lateral shortening due to regional tectonic stress, as the minimum axes generally parallel the convergence vector of the subducting South American plate and the maximum axes are trench-parallel. Because the orientations of the AMS axes in deformed sediments usually parallel the orientations of the principal strains, the AMS results indicate that the incremental strain state in the Barbados prism is one dominated by subhorizontal shortening. In contrast, the AMS axes within and below the decollement are consistent with a strain state dominated by vertical shortening (compaction). This abrupt change in AMS orientations at the top of the decollement at Site 948 is a direct manifestation of mechanical decoupling of the off-scraped prism sediments from the underthrust sediments. The decoupling horizon occurs at the top of the decollement zone, coinciding with the location of flowing, high-pressure fluids.

Description: Ecosystems damaged by distal volcanic ash and sulfur deposition usually recover within decades. However, sediment, stalagmite, and pollen records from the southernmost Andes indicate a 2000 yr impact on forest and aquatic ecosystems after deposition of a thin tephra layer. SO2 released from altering pumice produced intense soil and lake acidification in a 〉150,000 km2 area. Acidification led to nutrient leaching and affected soil microorganisms, causing plant decay and increased soil erosion in an area larger than 8000 km2. We conclude that weakly buffered soils in humid environments are extremely vulnerable to volcanic and anthropogenic acidification, causing long-lasting ecosystem damage and perturbations of paleoclimate proxy records.

Description: Submarine hydrothermal vents and associated sealfoor mineralization on the Tonga arc have been found for the first time, in the summit calderas of two shallow-water volcanoes, greatly extending the known areas and diversity of seafloor hydrothermal activity in the western Pacific region. The highest temperature vents (245-265 degrees C) occur at water depths of 385-540 m near the summit of one volcano at 24 degrees S. The vents are spatially related to basaltic dike swarms exposed at a summit cone and in the caldera walls. Clusters of large (to 10 m high) barite, anhydrite, and sulfide chimneys on the summit cone are vigorously discharging clear hydrothermal fluids with temperatures on the seawater boiling curve. There is abundant evidence of phase separation, which can be seen as flame-like jets of steam (H2O vapor) at the chimney orifices. Pyrite, marcasite, sphalerite, and chalcopyrite line the interiors of the highest temperature vents, similar to black smoker chimneys on the mid-ocean ridges.

Description: Six new labdane diterpenoids, leopersin C (1), 15-epi-leopersin C (2), leopersin D (3), leopersin E (4), leopersin F (5), and 7-epi-leopersin F (6) were isolated from the aerial parts of Leonurus persicus. Their structures were elucidated by extensive use of 1D and 2D homonuclear and heteronuclear shift-correlated 1H−13C-NMR spectroscopic methods. Leopersin C (1) and 15-epi-leopersin C (2) were obtained as a C-15 epimeric mixture, and their structures were elucidated on this basis.

Description: An automated method for on-site monitoring of uranium(VI) in raffinate streams originating from nuclear fuel reprocessing plants is described. An in-line stripping procedure (based on liquid/liquid extraction) was developed to extract U(VI) from this stream, a solvent mixture of 20% tributyl phosphate and nitric acid in kerosene, into an aqueous sodium sulfate solution, Degradation products in the solvent mixture, especially dibutyl phosphate, give rise to very strong complexes and are responsible for moderate but constant U(VI) recoveries (similar to 50%), Optimal conditions for in-line stripping comprise a mixing ratio of extractant (0.5 M sodium sulfate in water)/solvent mixture of similar to 3 and a pumping rate of similar to 0.4 mL min(-1) of the solvent mixture. The determination of U(VI) was by on-line cathodic stripping voltammmetry (CSV), preceded by adsorptive collection of the U(VL) as an oxine complex onto a hanging mercury drop electrode, Quantities of 1-2 mL of the aqueous extract were pumped into the voltammmetric cell and diluted (1/5 to 1/10) with a background electrolyte containing 0.1 M PIPES buffer, 2 x 10(-4) M oxine, 10(-4) M EDTA, and 0.2 M hydrazine hydrate (pH 9.0), The CSV peak for U(VI) was obtained at -0.68 V with a detection limit of 20 nM in the raffinate stream using an adsorption time of 120 s, Both the inline stripping procedure and the on-line measurement were fully automated, with a relative standard deviation in the measurements of 〈 5%.

Description: Hot springs in active geothermal areas such as Yellowstone National Park, the Geysers geothermal field in California, and the Taupo volcanic zone in New Zealand are notably enriched in the trace metals Au, Ag, As, Sb, and Hg. Such near-surface hot springs have formed many of the world's important deposits of gold and silver and some of the largest deposits of mercury. The majority of these are associated with continental geothermal systems in subaerial environments. Here we report the discovery of active mercury-depositing hot springs in a submarine setting, at nearly 200 m water depth, within the offshore extension of the Taupo volcanic zone of New Zealand. These vents contain the first documented occurrence of elemental mercury on the sea floor and provide an important link between offshore hydrothermal activity and mercury-depositing geothermal systems on land. The discovery has implications for mercury transport in sea-floor hydrothermal systems and underscores the importance of submarine volcanic and geothermal activity as a source of mercury in the oceans.

Description: We propose a classification scheme that unifies terminology for all primary volcaniclastic deposits, assigns initial depositional mechanism as the basis for classifying them, and refines the grain-size classes used to pigeonhole samples. By primary volcaniclastic deposits and rocks, we mean the entire range of fragmental products deposited directly by explosive or effusive eruption. This definition thus focuses on the primary transport and deposition of particles, rather than those processes by which the particles form or the nature of the fluid in which they are carried. We favor this approach for all primary volcaniclastic deposits because they typically contain assemblages of clasts formed by different processes and/or at different times that are subsequently brought together during eruption.