ALBERT

Beschreibung: The Altiplano represents a key region of the Central Andes, where the interplay between faults and syn-tectonic sediments allow the reconstruction of the kinematic evolution of the Central Andean high plateau. This study aims, by the use of incrementally-balanced crosssections, interpretation of reflection-seismic profiles, 3D strain analysis, gravity data interpretation, isotopic-age dating, and surface observations, to reconstruct the geological and tectonic history of the Southern Altiplano at 21o S between the Eastern and the Western Cordillera. The Southern Altiplano is a complex intramontane basin with 6-8km Cenozoic fill. It can be structurally divided in three domains; the Eastern, Central, and Western Altiplano. 2D balanced cross-sections based on seismic-reflector analysis and field observations show that the Eastern Altiplano is the buried, thin-skinned deformation front of the western part of the Eastern Cordillera's bivergent thrust system. The 20-40° dipping, blind faults merge into a shallow, eastward-dipping detachment at 7-9km depth that continues into the Eastern Cordillera. The Central Altiplano forms a bivergent system with 30-90° dipping, basement-involving thrusts in the east, and fault-propagation folds in the west. The shallow, westward-dipping detachment lies at 9-10km depth and possibly continues into the Western Altiplano, which forms a separate bivergent thrust-system.The computer-aided (GeoSec and 2DMove), incremental restoration of the balanced crosssections of the Eastern and Central Altiplano, and preliminary line-length balancing of the Western Altiplano, yields 38km shortening due to folding and thrusting. 3D strain analysis of sandstone grain shapes reveals that an additional 7.7% of shortening was accumulated as ductile, micro-scale strain. This increases the total shortening in the entire cross-section of the Southern Altiplano at 21° S to 60km or 21%. In addition, I suggest that the contribution of outcrop-scale structures possibly accounts for another 20 km. 3D strain analysis further shows that the 7.7% of microscale strain were accompanied by 13% orogen-parallel extension. These shortening estimates more than double the published shortening values from the Altiplano. Crustal thickening and plateau uplift in the arc-backarc domain of the South American convergent margin took place during the Cenozoic. K-Ar and Ar-Ar age-dating on syn-tectonic sediments, together with seismic-sequence analysis, demonstrates that the Southern Altiplano structure formed during two independent compressional increments (Early Oligocene [〉27 Ma] and Middle/Late Miocene [17-8 Ma]), which were preceded by an Eocene/Oligocene extensional event that led to the formation of a half graben in the Central, and possibly a second in the Eastern Altiplano. Horizontal contraction of the Altiplano ended between 11-8 Ma, was indicated by the age of undeformed volcanic rocks. Detailed seismic analysis of single syn-tectonic basins combined with isotopic ages of syntectonic sediments, reveal a complex deformation history characterised by spatially and temporally irregular fault activation, which excludes the existence of large-scale eastward or westward propagating deformation during plateau formation. This diffuse pattern of deformation was characteristic for the entire plateau domain, i.e. from the western flank to the eastern edge of the Eastern Cordillera, during a first stage of plateau formation between 30 and 10 Ma. This possibly indicates that the plateau has remained flat since its formation and did not evolve from an initially doubly-vergent orogen. The syn-tectonic stratigraphic units of the Southern Altiplano domain overlie shallow marine, Late Cretaceous sediments that still form a sub-horizontal regional near sea level. This indicates that plateau surface-uplift in this part of the plateau was mainly achieved by sedimentary in fill of tectonically-controlled, internally-drained basins, and not by tectonic uplift. The tectonic evolution of the Southern Altiplano was largely accompanied by magmatic activity. An episode of strong volcanic activity affected the entire width of the Altiplano and adjacent parts of the Eastern Cordillera between 25-8 Ma. However, a causal relationship between magmatism and deformation could not be shown for the Southern Altiplano. Strong Oligocene/Miocene volcanic activity, together with the diffuse pattern of deformation, suggests that the formation of the Altiplano Plateau was initiated by magmatically-controlled thermal weakening of the crust, possibly as the result of the removal of the mantle lithosphere. At present, the Altiplano has a flat topography, high heat-flow, and is spatially related to a variety of geophysical anomalies that are interpreted as partial melting of the middle crust (20-40km depth). From this evidence, I propose that the process of plateau formation is still active.

Beschreibung: The International Continental Scientific Drilling Program (ICDP) performed a dual-phase scientific drilling project to investigate mountain-building processes called Collisional Orogeny in the Scandinavian Caledonides (COSC). The borehole COSC-1 was drilled through the Lower Seve Nappe, as the first of two 2.5 km deep drill holes close to Åre, central Sweden. The recovered rocks comprise a 1650 m thick suite of high grade gneisses and amphibolites with clear Seve Nappe affinities, while the lower 850 m comprise rather homogenous mylonitic gneisses with interfingered K-rich phyllonite bands of cm to several m size and some intercalated amphibolites. The different lithologies all crosscut the core in a subhorizontal direction with foliation of gneisses and phyllonites in the same direction. Albite and garnet porphyroblasts with pressure shadows show syn-deformational growth and the same sub-horizontal alignment. The focus of this thesis is to detect chemical and mineralogical differences in mylonitic and host rocks and to relate these differences to either metasomatism and deformation or inherited source rock variance. Another goal of this work is to compare chemical core scanning instruments. For this purpose two different μ-Energy-Dispersive X-Ray Fluorescence (μ-EDXRF), Laser Induced Breakdown Spectroscopy (LIBS) and hyperspectral imaging techniques served to measure seven samples from the lower 850 m of the COSC-1 core. The measurements reveal sharp borders between different rock types without indication of metasomatic changes, pointing to a heterogeneous protolith such as greywacke. Element and mineral maps show strong pervasive ductile deformation with mylonite recrystallization. The comparison of the scanning devices shows that the μ-EDXRF scanner with 50 μm resolution can be used perfectly for microstructural investigations and heavy element analysis. The XRF core scanner from AVAATECH is very useful and sufficiently precise for element profiles of line scans. The LIBS scanner is great to create distribution maps of elements from H to U with a resolution of 200 μm. The hyperspectral cameras are extremely fast in acquiring spectral mineral maps and structural information. However, several rock forming minerals in gneisses can currently not be identified and a calibration for metamorphic rocks is still needed.

Beschreibung: The LaCoste & Romberg gravity meter S124b and its associated system environment were installed and tested in conjunction with a strap-down gravity meter system (SAGS) of the Bayerische Akademie der Wissenschaften in Munich on a Cessna Grand Caravan of the DLR in Oberpfaffenhofen. This report describes the design and instrumentation of the aerogravimetry system, it documents the installation on the aircraft and it discusses some of the results of the test flights performed within AGFA (Airborne Gravity Flight Approach). Beyond the documentation of the system this report gives a short introduction to the basics of the instruments including a short theory of their operation and data processing. The intention is to give readers from disciplines other than aero-gravimetry and aero-altimetry a technical insight into how the system works and what it is capable of. This should help the reader to evaluate the systems usefulness in other geo-scientific projects. The experiences from the test flights are briefly summarized and an update of the current status and future plans for the individual instruments is given. The aerogravimetry system consists of two major instrument blocks: the gravimetry sensing system and the positioning system. The gravimetry sensors are the LaCoste & Romberg S124b and the SAGS-2.2 systems. The navigation block holds GPS receivers, an inertial navigation system and a laser altimeter. The aircraft used for the primary tests was a Cessna Grand Caravan of the DLR in Oberpfaffenhofen. It offers superb conditions for scientific installations and is widely used in geophysical exploration all over the world. The test flights were flown from Oberpfaffenhofen airport. One profile covers the Bavarian Alps to map short wavelength, topography induced gravity disturbances, and another flight crosses the Rhine Graben to map long wavelength structures of the deeper crust. The software for data processing for navigation, gravimetry and geoid calculations is briefly summarized.

Beschreibung: This report describes the set-up, logistics and results of the CHICAGO (Chilean Coastal AeroGeophysical Observations) survey. It gives a short overview about the scientific intentions, detailed documentation of all technical aspects starting from the survey equipment via the aircraft installation to the GPS stations set-up and the experiences in flight. All processing results for the individual profiles are discussed in detail. Finally, the data is compared and combined with available recent marine gravity data and altimetry derived solutions.

Beschreibung: Die vorliegende Arbeit beschäftigt sich mit der kombinierten strukturgeologischen und magnetotellurischen Untersuchung eines Segmentes der ’West Fault’-Störung in den nordchilenischen Anden. Die West Fault ist ein Abschnitt des über 2000 km langen Präkordilleren-Störungssystem, welches im Zusammenhang mit der Subduktion vor der südamerikanischenWestküste entstanden ist. Die Aktivität dieses Störungssystems reichte vom Eozän bis in das Quartär. Der Verlauf der West Fault ist im Untersuchungsgebiet (22° 04’ S, 68° 53’W) an der Oberfläche klar definiert und weist über viele zehner Kilometer eine konstante Streichrichtung auf. Die Aufschlussbedingungen und die Morphologie des Arbeitsgebietes sind ideal für kombinierte Untersuchungen der störungsbezogenen Deformation und der elektrischen Leitfähigkeit des Untergrundes mit Hilfe magnetotellurischer Experimente (MT) und der erdmagnetischen Tiefensondierung (GDS). Ziel der Untersuchungen war es, eine mögliche Korrelation der beiden Meßmethoden herauszuarbeiten, und die interne Störungsarchitektur der West Fault umfassend zu beschreiben.

Beschreibung: Deformation processes in the early deformation stages of thrusting in growing fold-and-thrust belts and the role of factors controlling and localizing the deformation are still not well understood. There are only few natural examples or experimental studies to allow the identification of factors controlling initial states of deformation. In particular, the spatial interactions in curved fold-and-thrust belts or in segments striking obliquely to the convergence direction are rarely systematically examined. The Boomerang Hills Region (BHR), located at the eastern flank of the Central Andes close to the axis of the Bolivian Orocline, is an appropriate area to study such problems. There, oblique contraction is caused by a south-dipping basement interacting with a WSW-ENE to SW-NE convergence direction. In order to infer the controlling factors of deformation, the structural pattern associated with the active development of a new thrust sheet and the structural history of the adjacent foreland was examined. The detailed spatial-temporal relationships of Andean and pre-Andean structures within the BHR were investigated using a dense network of 100 reflection-seismic profiles for subsurface interpretation and structural modeling. In addition, satellite images and drainage pattern were interpreted to infer neotectonic activity. Modeling techniques included cross section balancing for validation and quantification of geological processes, horizon unfolding for kinematical interpretation, and critical taper estimates to derive the possible dynamic status. Results show that the main factor controlling the evolution of the Boomerang Hills Thrust Unit and the eastern flank of the Bolivian Orocline are paleogeographic features. The crystalline basement of the BHR comprises an inherited structure of several syn- and antiforms. Some of these structures were partly reactivated as minor reverse faults with associated small folds in the sedimentary cover at an early stage of the Tertiary foreland basin evolution. Basement faulting is probably a result of spatial problems linked to the initiation of a foreland basin in a heterogeneous crust. WNW-ESE striking normal faults were active in the foreland of the BHR in the Late Tertiary and show maximum activity during the intermediate state of foreland basin sedimentation. Further to the north, closer to the Brazilian Craton, normal faults are presently active. Foreland extension sums to 1.1%-1.5% and results from minor flexural extension due to bending of the Brazilian Shield lithosphere through Andean orogenic loading. The southern part of the BHR is represented by a young, evolving thrust sheet. Two zones can be differentiated along the Andean deformation front: (1) a W-E to NW-SE-striking frontal segment of predominantly orthogonal shortening, comprising a thrust / anticline system and accommodating at least 1400- 2000 m horizontal shortening on the basal decollement ; (2) A WSW-ENE-striking lateral zone of oblique shortening comprised by a complex system of thin-skinned strike-slip faults and minor folds. The deformation front always follows a pronounced edge in the topography of the top basement surface close to the boundary of the Paleozoic basin. Usually, faults are located close to asperities in the top basement surface; fold axes trend parallel to the contours of basement depth. The orientation of the deformation front as well as the laterally varying structural style is the result of deformation localization and strain partitioning. Because of the impossibility to accommodate non-orthogonal contraction by oblique faulting close to the surface, strain partitioning must occur along the deformation front. Consequently, a N 35°E thrusting direction is divided into orthogonal and tangential components, both with respect to the orientation of the deformation front and to depth contours of the basement. The two components are accommodated by convergent and strike-slip structures, respectively, which join via a common detachment horizon. The Boomerang Hills Thrust Unit is affected by left-lateral shear as interpreted from the particle displacement field of an unfolded horizon. This shear is invoked by the spatially distributed accommodation of thrust movement along the obliquely striking deformation front. The N 35° thrusting direction of the Boomerang Hills Thrust Unit represents the orthogonal component of strain partitioning caused by the WNW-ESE orientation of the Subandean Zone with respect to a WSW-ENE convergence between the Andes and the Brazilian shield. The tangential component is compensated at the back of the Boomerang Hills Thrust Unit where a positive flower structure is present and strain partitioning is made possible via the detachment horizon. Critical taper analysis shows that thrusting on the south-dipping basement is possible without any substantial internal deformation due to the wedge shape of the sedimentary prism. Therefore, the most important factor controlling the localization of the deformation front is the loss of critical taper at a pronounced edge along the Paleozoic basin boundary. Secondary reasons for deformation localization are small asperities in/close to the top of the basement, e.g. small folds of the early foredeep evolution. Strain partitioning may also play a major role for the evolution of the eastern border of the Bolivian Orocline and in other curved fold-and-thrust belts as discussed for natural and experimental examples. Generally, orthogonal accreting segments evolve faster than obliquely orientated segments due to strain partitioning at the deformation front, hence leading to an increase in the curvature of the belt. Strain partitioning itself is caused by the orientation of the deformation front with respect to the shortening direction. Thus, factors controlling the localization of the deformation front, i.e. paleogeographic features, dominantly control the evolution of curved fold-and-thrust belts. For the eastern flank of the Bolivian Orocline it is postulated that an early Paleozoic rift basin exerts paleogeographic control on Andean deformation, leading to the WNW-ESE orientation of the Subandean Zone between the Chapare and Santa Cruz. Based on map interpretation it is suggested that (a) the previously assumed style of deformation using main thrusts is questionable for this segment of the Andes and (b) deformation involving basally accreting foredeep sediments has to be taken into account. Previously assumed estimates of shortening for the Chapare area in the northern limb of the Bolivian Orocline may therefore be significantly low.

Beschreibung: Against the background of EnMAP preparation analyses have been carried out on the status of research in various areas of hyperspectral remote sensing for the use of existing algorithms in the EnMAP application box. The aim was to compose the status of research in Germany and internationally. Therefore, in various fields of expertise applied and accordingly available algorithms and products based on hyperspectral data has been evaluated and documented. The intention has been to demonstrate and to evaluate the added value of hyperspectral remote sensing to multispectral methods for each product. For this purpose analyses have been carried out by different research groups which were based on the specialty and the experience of each group. Hereby a summary was created of each major application perspective and the relevant remote sensing derived variables and significant processing algorithms (state-of-the-art) belonging to this context. Based on this, the research delivers, as a result, a recommendation which of the algorithms should be implemented into the Applikationsbox of EnMAP. Tests of the algorithms or their implementation were not part of the analyses. However, notes have been given on what algorithms should be tested in the context of a detailed preparation phase. An assessment to the further R & D requirements in the development of algorithms has been made on this basis.

Beschreibung: Der vorliegende Bericht fasst die Ergebnisse der in den Jahren 2000 und 2001 durchgeführten Arbeiten zur Aufwältigung, zum primären Test- und Messprogramm sowie zum Monitoring in der Geothermiebohrung Groß Schönebeck 3/90 zusammen. Mit Mitteln aus der Grundfinanzierung des GeoForschungsZentrums Potsdam wurde die Bohrung aufgewältigt und bis in eine Endteufe von 4294 m vertieft. Sie erschließt geothermisch interessante Horizonte des Norddeutschen Beckens in Tiefen zwischen ca. 3900 m und 4300 m bei einem Temperaturniveau von ca. 150°C. Dabei gewonnene Ergebnisse lassen sich auf ähnliche geologische Randbedingungen im Norddeutschen Becken übertragen. Dieses Sedimentbecken zieht sich von den Niederlanden über Norddeutschland bis nach Polen hin.

Beschreibung: Ziel dieser Arbeit ist die Quantifizierung von Modalbeständen magmatischer Gesteine anhand ihrer Infrarot-Spektren, basierend auf einer spektralen Einzelmineralanalyse. Dazu wurde eine neue, modellbasierte, spektrale Entmischungsmethode entwickelt. Diese Methode basiert auf reflexionsspektroskopischen Messungen im thermalen Infrarot von 8 - 14 μm, da in diesem Wellenlängenbereich silikatische Minerale und damit auch magmatische Gesteine ihre stärksten Spektralmerkmale (Reststrahlenbanden) aufweisen. Als Grundlage dienten Gesteinsproben des präkambrischen Gesteinskomplex Mt. Timna in Südisrael, der sich aus verschiedenen granitoiden Gesteinen und einer ultrabasischen Gesteinseinheit zusammensetzt. Die hier vorgestellte Arbeit entstand im Zusammenhang mit vorbereitenden Untersuchungen zur Entwicklung neuer Analysemethoden für einen neuen hyperspektralen Thermalsensors (ARES), der ab 2005 vom GFZ und dem DLR operationell betrieben werden soll.

Beschreibung: The aim of this dissertation is to quantify scaling relations of strain accumulation in nature on various temporal and spatial scales, in order to characterize the underlying deformation mechanisms [...] Apart from the introduction (Chapter 1), the dissertation is divided into eight further chapters: a review of the common deformation frameworks, scaling relations and their dependence on parameter changes (Chapter 2); a description of the applied methods (Chapter 3); a description of the tectonic setting of the Central Andean plateau (Chapter 4); three scientifi c manuscripts for publication in international peer-reviewed journals (Chapter 5, 6, 7); additional analogue data (Chapter 8); and conclusions with outlook on future research (Chapter 9). The appendix includes all references used in any of the chapters, the deformation database used in Chapter 5, more geostatistical data, data for the sensitivity analysis, a short documentation on all performed granular experiments with set-up sketches, material properties of vise experiments, acknowledgments, and a CV.

Beschreibung: Mit dem Journal „System Erde“ berichtet das Deutsche GeoForschungsZentrum GFZ über die unterschiedlichen Facetten seiner Forschungsarbeiten. Die Reihe richtet sich vor allem an Entscheidungsträger in Wissenschaft, Gesellschaft und Politik, an interessierte Wissenschaftlerinnen und Wissenschaftler sowie an die fachinteressierte Öffentlichkeit.

Beschreibung: Mit dem Journal „System Erde“ berichtet das Deutsche GeoForschungsZentrum GFZ über die unterschiedlichen Facetten seiner Forschungsarbeiten. Die Reihe richtet sich vor allem an Entscheidungsträger in Wissenschaft, Gesellschaft und Politik, an interessierte Wissenschaftlerinnen und Wissenschaftler sowie an die fachinteressierte Öffentlichkeit.

Beschreibung: Die vorliegende Ausgabe des GFZ-Journals „System Erde“ soll einen Einblick in die am GFZ betriebene Forschung zur Seismologie geben.

Beschreibung: Was wissen wir über Vulkane im Meer und an Land? Wie kann man sich vor ihnen schützen? Verändern sie das Klima? In unserem großen Themenspezial gehen wir diesen spannenden Forschungsfragen nach.