ALBERT

Description: This contribution presents the state of the art of economy-wide material flow accounting. Starting from a brief recollection of the intellectual and policy history of this approach, we outline system definition, key methodological assumptions, and derived indicators. The next section makes an effort to establish data reliability and uncertainty for a number of existing multinational (European and global) material flow accounting (MFA) data compilations and discusses sources of inconsistencies and variations for some indicators and trends. The results show that the methodology has reached a certain maturity: Coefficients of variation between databases lie in the range of 10% to 20%, and correlations between databases across countries amount to an average R2 of 0.95. After discussing some of the research frontiers for further methodological development, we conclude that the material flow accounting framework and the data generated have reached a maturity that warrants material flow indicators to complement traditional economic and demographic information in providing a sound basis for discussing national and international policies for sustainable resource use.

Description: Managing solid waste is one of the biggest challenges in urban areas around the world. Technologically advanced economies generate vast amounts of organic waste materials, many of which are disposed to landfills. In the future, efficient use of carbon containing waste and all other waste materials has to be increased to reduce the need for virgin raw materials acquisition, including biomass, and reduce carbon being emitted to the atmosphere therefore mitigating climate change. At end-of-life, carbon-containing waste should not only be treated for energy recovery (e.g. via incineration) but technologies should be applied to recycle the carbon for use as material feedstocks. Thermochemical and biochemical conversion technologies offer the option to utilize organic waste for the production of chemical feedstock and subsequent polymers. The routes towards synthetic materials allow a more closed cycle of materials and can help to reduce dependence on either fossil or biobased raw materials. This chapter summarizes carbon-recycling routes available and investigates how in the long-term they could be applied to enhance waste management in both industrial countries as well as developing and emerging economies. We conclude with a case study looking at the system-wide global warming potential (GWP) and cumulative energy demand (CED) of producing high-density polyethylene (HDPE) from organic waste feedstock via gasification followed by Fischer–Tropsch synthesis (FTS). Results of the analysis indicate that the use of organic waste feedstock is beneficial if greenhouse gas (GHG) emissions associated with landfill diversion are considered.

Description: In rural areas, access to electricity is required for better living standard, enhance income options and reduce population migration. In last decades, steady progress has been made but the status of electrification significantly varies across countries. In developing countries, about 1.6 billion people live without electricity and another 2 billion have access but to an unreliable extent. Large population also live in remote areas where extension of grid is not feasible, where people continuing to live under distress conditions. International projections reveal that number of un-electrified people will remain same by the year 2030 if similar pace of electrification is continued in future.From this perspective, the study describes what bigger countries such as India, China and Brazil are doing and where rural electrification stands in priority in a poor country like Ethiopia. Is off-grid technologies show an option for such remote locations" The two case studies of Vietnam and South Africa reveal that work carried out through external support in the absence of national policies. As a result, people have experienced the benefits of technologies but unable to retain them in long term. Electricity has given various advantages but poor affordability of the people hinders the acceptance of technologies in rural areas.The study shows the need of a framework to achieve the long-term support for rural electrification. A framework that could direct the national priorities, understands social, economic and environmental aspects of off-grid technologies, identify key areas to be strengthen, allocates the roles and responsibilities at different working levels, maintains a consistent flow of adequate finance, pursue regular monitoring process and incorporate the monitoring results, or, critical success factors into the national policies to make them more effective. Both macro- as well as micro-level approaches have been suggested in this study.

Description: After considerable improvements of wastewater treatment, the loads of nutrients and plant protection agents, deriving from agriculture and heavy metals from urban drainages effluents as well as from erosion of agricultural soils are the main sources of nutrients and harmful substances in the loads of water bodies. The targets of the project were on the one hand the analysis of the political and legislative framework of both policy fields and on the other hand the evaluation of several, selected water protection measures with regard to their contribution to reduce water pollution, their economical effects as well as their political enforceability. The focus was laid on diffuse water pollution caused by agriculture. As main reasons for the diffuse water pollution stagnating at high level, the analysis of the political framework identified a lack of implementation discipline of water law, followed by the fragmented and insufficient water protection legislation itself and the previous design of the common agricultural policy slanted towards increasing productivity. For the future co-operation of agricultural and water authorities in implementation of their reforms and better definition of "Good Farming Practice" are recommended. The second investigation level focuses on the analysis and assessment of selected measures to reduce the input of nutrients and plant protection agents. This part was done with help of calculation models focussing on the specific cost/benefit ratios for water protection. In detail the following measures have been analysed: decoupling of direct payments, coupling of livestock farming to areas, tax on mineral nitrogen, pesticide levy, buffer stripes alongside of watercourses, all season crop cover on arable land, soil cultivation procedures, changing the use of arable land, optimisation of animal nutrition, optimisation of manure storage and application, co-operative agreements, education and training. Co-operations and water protection related education and training can be highly recommended, since they improve knowledge and freedom of action. As the results on county level show, the measure "Decoupling of direct payments" would not lead to appreciable changes as far as the nutrient surpluses on farmland is concerned. "Coupling livestock farming to areas" would decrease the surpluses substantially. For this measure and Tax on mineral nitrogen, varying adaptation reactions could be expected depending on the regional specialisation in cropping or livestock farming areas. On single farm level the measures, protein adapted feeding, optimisation of manure storage and application showed the best cost-efficiency to reduce nutrient surpluses. All season crop cover on arable land and conservation tillage are highly efficient, too, and should be included in farming practice. A stronger limitation of livestock density could mean a reduction of manure, but the implementation of this measure would lead to high losses of income for farmers specialised in animal production. For reduction of diffuse water pollution caused by urban drainage political approaches as well as detailed technical measures are examined. In the area of urban drainage storm water management (especially infiltration and constructed wetlands), unsealing of paved areas and small wastewater treatment structures (for phosphorus reduction) showed best cost-effectiveness.

Description: The paper analyzes a Bolivian region for possible cultivation of the oil plant Jatropha curcas for sustainable biodiesel production in order to replace in part Bolivia's diesel imports. The specific site for this study is located in the dry region of Gran Chaco in Santa Cruz. The aim of this work is to analyse the potential of useable land and resources for sustainable biodiesel production from Jatropha without competition with edibles production using economic, environmental and social criteria. In addition the article introduces Jatropha as one of the preferred oil plants for biodiesel production in several countries and indicates its different uses. The recommendation to cultivate Jatropha for biodiesel production is based on an exploration of the possibility of land use in the selected region and the benefits Jatropha production could offer. In this manner a sustainable cultivation of Jatropha in the region of Gran Chaco is recommended to produce biodiesel and to improve some of the environmental problems facing the region.

Description: This study provides insight into the feasibility of a CO2 trunkline from the Netherlands to the Utsira formation in the Norwegian part of the North Sea, which is a large geological storage reservoir for CO2. The feasibility is investigated in competition with CO2 storage in onshore and near-offshore sinks in the Netherlands. Least-cost modelling with a MARKAL model in combination with ArcGIS was used to assess the cost-effectiveness of the trunkline as part of aDutch greenhouse gas emission reduction strategy for the Dutch electricity sector and CO2 intensive industry. The results show that under the condition that a CO2 permit price increases from €25 per tCO2 in 2010 to €60 per tCO2 in 2030, and remains at this level up to 2050, CO2 emissions in the Netherlands could reduce with 67% in 2050 compared to 1990, and investment in the Utsira trunkline may be cost-effective from 2020–2030 provided that Belgian and German CO2 is transported and stored via the Netherlands as well. In this case, by 2050 more than 2.1 GtCO2 would have been transported from the Netherlands to the Utsira formation. However, if the Utsira trunkline is not used for transportation of CO2 from Belgium and Germany, it may become cost-effective 10 years later, and less than 1.3 GtCO2 from the Netherlands would have been stored in the Utsiraformation by 2050. On the short term, CO2 storage in Dutch fields appears more cost-effective than in the Utsira formation, but as yet there are major uncertainties related to the timing and effective exploitation of the Dutch offshore storage opportunities.

Description: Life Cycle Assessment (LCA) has matured over the past decades and become part of the broader field of sustainability assessment. To strengthen LCA as a tool and eventually increase its usefulness for sustainability decision-making, it is argued that there is a need to expand the ISO LCA framework by integration and connection with other concepts and methods. This paper explores the potential options for deepening and broadening the LCA methodologies beyond the current ISO framework for improved sustainability analysis. By investigating several environmental, economic and social assessment methods, the paper suggests some options for incorporating (parts of) other methods or combining with other methods for broadening and deepening the LCA.

Description: This study aims to stimulate the discussion on how to optimize a sustainable energy mix from an environmental perspective and how to apply existing renewable energy sources in the most efficient way. Ground-mounted photovoltaics (PV) and the maize-biogas-electricity route are compared with regard to their potential to mitigate environmental pressure, assuming that a given agricultural area is available for energy production. Existing life cycle assessment (LCA) studies are taken as abasis to analyse environmental impacts of those technologies in relation to conventional technology for power and heat generation. The life-cycle-wide mitigation potential per area used is calculated for the impact categories non-renewable energy input, green house gas (GHG) emissions, acidification and eutrophication. The environmental performance of each system depends on the scenario that is assumed for end energy use (electricity and heat supply have been contemplated). In all scenarios under consideration, PV turns out to be superior to biogas in almost all studied impact categories. Even when maize is used for electricity production in connection with very efficient heat usage, and reduced PV performance is assumed to account for intermittence, PV can still mitigate about four times the amount of green house gas emissions and non-renewable energy input compared to maize-biogas. Soil erosion, which can be entirely avoided with PV, exceeds soil renewal rates roughly 20-fold on maize fields. Regarding the overall Eco-indicator 99 (H) score under most favourable assumptions for the maize–biogas route, PV has still a more than 100% higher potential to mitigate environmental burden. At present, the key advantages of biogas are its price and its availability without intermittence. In the long run, and with respect to more efficient land use, biogas might preferably be produced from organic waste or manure, whereas PV should be integrated into buildings and infrastructures.

Description: For parabolic trough power plants using synthetic oil as the heat transfer medium, the application of solid media sensible heat storage is an attractive option in terms of investment and maintenance costs. One important aspect in storage development is the storage integration into the power plant. A modular operation concept for thermal storage systems was previously suggested by DLR, showing an increase in storage capacity of more than 100 %. However, in these investigations, the additional costs needed to implement this storage concept into the power plant, like for extra piping, valves, pumps and control had not been considered. These aspects are discussed in this paper, showing a decrease of levelized energy costs with modular storage integration of 2 to 3 %. In a Life Cycle Assessment (LCA) a comparison of an AndaSol-I type solar thermal power plant [1] with the original two-tank molten salt storage and with a "hypothetical" concrete storage shows an advantage of the concrete storage technology concerning environmental impacts. The environmental impacts of the “hypothetical” concrete based AndaSol-I decrease by 7 %, considering 1 kWh of solar electricity delivered to the grid. Regarding only the production of the power plant, the emissions decrease by 9.5 %.

Description: Fossil independence and substantial reductions in CO2 emissions seem to be possible with 2nd generation biofuels. New technologies allow a full carbon-to-fuel conversion of non-edible plant parts such as straw or wood, and the cultivation of algae or salt-resistant plants uncouples bioenergy from food production. Nevertheless, impacts on biodiversity, global land and water use are widely unclear and their competitiveness with 1st generation biofuels and electric mobility is an open question. An interdisciplinary team of Empa, University of Zurich and the Wuppertal Institute of Climate, Environment and Energy evaluated the most sustainable production techniques and assessed their potential for our future mobility.

Description: The analysis of different global energy scenarios in part I of the report confirms that the exploitation of energy efficiency potentials and the use of renewable energies play a key role in reaching global CO2 reduction targets. An assessment on the basis of a broad literature research in part II shows that the technical potentials of renewable energy technologies are a multiple of today's global final energy consumption. The analysis of cost estimates for renewable electricity generation technologies and even long term cost projections across the key studies in part III demonstrates that assumptions are in reasonable agreement. In part IV it is shown that by implementing technical potentials for energy efficiency improvements in demand and supply sectors by 2050 can be limited to 48% of primary energy supply in IEA's "Energy Technology Perspectives" baseline scenario. It was found that a large potential for cost-effective measures exists, equivalent to around 55-60% of energy savings of all included efficiency measures (part V). The results of the analysis on behavioural changes in part VI show that behavioural dimensions are not sufficiently included in energy scenarios. Accordingly major research challenges are revealed.

Description: The article assesses the material footprints of households living on a minimum amount of social benefits in Finland and discusses the consequences in terms of ecological and social sustainability. The data were collected using interviews and a questionnaire on the consumption patterns of 18 single households. The results are compared to a study on households with varying income levels, to average consumption patterns and to decent minimum reference budgets. The low-income households have lower material footprints than average and most of the material footprints are below the socially sustainable level of consumption, which is based on decent minimum reference budgets. However, the amount of resources used by most of the households studied here is still at least double that required for ecological sustainability. The simultaneous existence of both deprivation and overconsumption requires measures from both politicians and companies to make consumption sustainable. For example, both adequate housing and economic mobility need to be addressed. Measures to improve the social sustainability of low-income households should target reducing the material footprints of more affluent households. Furthermore, the concept of what constitutes a decent life should be understood more universally than on the basis of standards of material consumption.

Description: Current production and consumption patterns remain unsustainable: Global economic growth reaches planetary boundaries and puts increasing pressure on the world's natural resources. Whereas most economic actors just react to environmental pressures, proactive market actors and other non-governmental organisations, e.g. greentec firms or fair trade organisations, turn them into market opportunities or even create standards or certification schemes as promising problem-solving market instruments in global value chains. However, how legitimate are standards and certification schemes developed by collaborating non-state actors for sustainability in global value chains? What are conditions for the success of those market-based governance mechanisms? This paper discusses the legitimacy and effectiveness of standard setting in the case of palm oil and focuses on the Roundtable of Sustainable Palm Oil (RSPO) as the first global standard setting initiative in this respect. Conditions for the success of sustainability standard setting in global value chains are identified based on the concept of non-state market-driven (NSMD) governance, based on literature review and expert interviews on standard setting. Results from the case study on RSPO highlight strengths and weaknesses of its standard setting process in the light of increasing market demand for palm oil.

Description: New technologies can be the basis for resource-efficient products and services and thus create eco-innovations, either by creating new functionalities in existing or new application fields or by substituting existing technologies in existing or new application fields. In this paper, an overview over different technology fields, products and strategies with resource efficiency potential, such as nanotechnolo- gies, material science, manufacturing technologies, process technologies and cross-cutting issues, is presented. There is a special focus on applications from nanotechnology issuing, e.g. functional surfaces or new "smart" materials with special functionalities. Furthermore, it is shown how companies can use the method Resource Efficiency Technology Radar to identify and evaluate technolo- gies with resource efficiency in order to incorporate them into their development activities.

Description: During the last century, the consumption of materials for human needs increased by several orders of magnitude, even for non-renewable materials such as metals. Some data on annual consumption (input) and recycling/waste (output) can often be found in the federal statistics, but a clear picture of the main flows is missing. A dynamic material flow model is developed for the example of copper in Switzerland in order to simulate the relevant copper flows and stocks over the last 150 years. The model is calibrated using data from statistical and published sources as well as from interviews and measurements. A simulation of the current state (2000) is compared with data from other studies. The results show that Swiss consumption and losses are both high, at a level of about 8 and 2 kg/(cap year), respectively, or about three times higher than the world average. The model gives an understanding of the flows and stocks and their interdependencies as a function of time. This is crucial for materials whose consumption dynamics are characterised by long lifetimes and hence for relating the current output to the input of the whole past. The model allows a comprehensive discussion of possible measures to reduce resource use and losses to the environment. While increasing the recycling reduces losses to landfill, only copper substitution can reduce the different losses to the environment, although with a time delay of the order of a lifetime.

Description: Several countries with large coal deposits but limited domestic oil reserves show high interest in coal-to-liquid (CtL) technologies, which could reduce crude oil imports by converting coal into liquid hydrocarbon fuels. After decades of successful large-scale operating experiences in South Africa, CtL activities in the United States, China and Germany have been fanned by the high oil price in the last years. However, CtL indicates negative techno-economic and resource-related features, such as high capital costs, high greenhouse gas discharges and high water consumption. Therefore, the technology's diffusion strongly depends on a favourable framework of policies and strong technology advocates. Daniel Vallentin analyses interdependencies between technical and non-technical parameters affecting the diffusion of CtL technologies in the United States, China and Germany. Applying the inter-disciplinary technological system approach, he identifies factors which determine the market prospects of CtL in these countries, including costs, the geographic distribution of coal reserves, actor constellations and technology, energy and climate policies. At the end of his study, he derives general conclusions with regard to driving forces and barriers for CtL diffusion. As the investigated countries are major consumers of energy and belong to the world's largest emitters of greenhouse gases, their strategies in substituting crude oil based fuels are of utmost global relevance. Therefore, Vallentin's study is recommended to experts, planners, decision-makers, and politicians in the field of climate and resource protection.

Description: Overviewing the European carbon (C), greenhouse gas (GHG), and non-GHG fluxes, gross primary productivity (GPP) is about 9.3 Pg yr-1, and fossil fuel imports are 1.6 Pg yr-1. GPP is about 1.25% of solar radiation, containing about 360 × 1018 J energy - five times the energy content of annual fossil fuel use. Net primary production (NPP) is 50%, terrestrial net biome productivity, NBP, 3%, and the net GHG balance, NGB, 0.3% of GPP. Human harvest uses 20% of NPP or 10% of GPP, or alternatively 1‰ of solar radiation after accounting for the inherent cost of agriculture and forestry, for production of pesticides and fertilizer, the return of organic fertilizer, and for the C equivalent cost of GHG emissions. C equivalents are defined on a global warming potential with a 100-year time horizon. The equivalent of about 2.4% of the mineral fertilizer input is emitted as N2O. Agricultural emissions to the atmosphere are about 40% of total methane, 60% of total NO-N, 70% of total N2O-N, and 95% of total NH3-N emissions of Europe. European soils are a net C sink (114 Tg yr−1), but considering the emissions of GHGs, soils are a source of about 26 Tg CO2 C-equivalent yr-1. Forest, grassland and sediment C sinks are offset by GHG emissions from croplands, peatlands and inland waters. Non-GHGs (NH3, NOx) interact significantly with the GHG and the C cycle through ammonium nitrate aerosols and dry deposition. Wet deposition of nitrogen (N) supports about 50% of forest timber growth. Land use change is regionally important. The absolute flux values total about 50 Tg C yr-1. Nevertheless, for the European trace-gas balance, land-use intensity is more important than land-use change. This study shows that emissions of GHGs and non-GHGs significantly distort the C cycle and eliminate apparent C sinks.

Description: Iran as an energy-rich country faces many challenges in optimal utilization of its vast resources. High population and economic growth, generous subsidies program, and poor resource management have contributed to rapidly growing energy consumption and high energy intensity for the past decades. The continuing trend of energy consumption will bring about new challenges as it will shrink oil exports revenues restraining economic activities and lowering standard of living. This study intends to tackle some of the important challenges in the energy sector and to explore alternative scenarios for utilization of energy resources in Iran for the period 2005-2030. We use techo-economic or end-use approach along with econometric methods to model energy demand in Iran for different types (fuel, natural gas, electricity, and renewable energy) in all sectors of the economy (household, industry, transport, power plants, and others) and forecast it under three scenarios: Business As Usual (BAU), Efficiency, and Renewable Energy. This study is the first comprehensive study that models the Iranian energy demand using the data at different aggregation levels and a combination of methods to illuminate the future of energy demand under alternative scenarios. The results of the study have great policy implications as they indicate a huge potential for energy conservation and therefore additional revenues and emission reduction under the efficiency scenario compared with the base scenario. Specifically, the total final energy demand under the BAU scenario will grow on average by 2.6 percent per year reaching twice the level as that in 2005. In contrast, the total final energy demand in the Efficiency scenario will only grow by 0.4 percent on average per year. The average growth of energy demand under the combined Efficiency and Renewable Energy scenarios will be 0.2 percent per year. In the BAU scenario, energy intensity will be reduced by about 30 percent by 2030, but will still be above today's world average. In the Efficiency scenario, however, energy intensity will decline by about 60 percent by 2030 to a level lower than the world average today. The energy savings under the Efficiency and Renewable scenarios will generate significant additional revenues and will lead to 45 percent reduction in CO2-emissions by 2030 as compared to the BAU trends.

Description: Carbon capture and storage (CCS) might be an important climate protection technology for coal-rich countries. This paper presents first results of a systemic and long-term analysis of a future CCS implementation in India. It focuses on potential storage formations in the geological subsurface and the geographic match of these sinks with CO2 emissions of current and future largepoint power plants. The analysis is framed by an overview on India’s position on CCS, ongoing Indian research and development projects as well as its international activities. The geological potential for CO2 sequestration in India is subject to large uncertainty because, so far, only few studies estimated it in a vague manner. A first meta-analysis shows that there is a huge variation between 48 Gt and 572 Gt of CO2. The main differences between the evaluated studies are the assumed capacities for deep saline aquifers and basalt formations. Taking the ongoing discussion and the existing uncertainties into account, the storage potential might be provided only by aquifers (in the range of 44 to 360 Gt of CO2) and hydrocarbon fields (2 to 7 Gt of CO2). The amount of CO2 emissions possibly available for sequestration is assessed by applying three substantially different long-term energy scenarios for India. These scenarios, indicating pathways between a "low carbon" and a "high carbon" development until 2050, result in cumulated CO2 emissions between 30 and 171 Gt if all new large-scaled power plants will be based on CCS from 2020 on. Compared with the sink capacities, only the CO2 emissions of scenario S2 (30 Gt) could theoretically be stored with high certainty. Considering the scenarios S3 and S1, their CO2 emissions (94 Gt and 171 Gt, respectively) could only be sequestered if the aquifer capacity would prove to be usable. Geological storage sites do not appear to be located close to sources in South West, Central, North and North East India. This first rough analysis means that only those CO2 emissions occurring in the Western parts of North and West India, the Eastern part of South India as well as the South part of East India might be suited for sequestration nearby. A more detailed source-sink matching will follow in the next phase of the project, including results of expert meetings in India. Furthermore, this analysis will be complemented by an additional assessment from economic, ecological and resource-strategic points of view, which might further affect the potential for CCS.

Description: Material flows induced by national economies can be regarded as indirect pressure indicators for environmental degradation. Economy-wide material flow analysis and indicators have been designed to monitor material and energy flows at the macroeconomic level and to provide indicators, which could contribute to management of resourceuse and output emission flows from both economic, environmental and broader sustainability points of view. These indicators can serve various purposes including monitoring the material basis of national economies and related environmental pressures, assessment of the material and resource productivity and monitoring the implications of trade and globalisation. The main part of this paper compares the material and resourceuse of the Czech Republic, Germany and the EU-15 by means of DMI and TMR indicators over the period of 1991–2004 (1991–2000 for EU-15). At the aggregate level both indicators in all three economies do not show any clear decreasing or increasing trends over the period considered. This means that environmental pressure related to use of materials for production and consumption purposes remains rather stable. All the economies however, recorded an increase in the efficiency of transforming the material/resource inputs into economic output. The analysis further revealed that most of the dynamics of DMI and TMR in the Czech Republic tended towards a higher similarity with Germany and the EU-15. In the future, further decreases in DMI as well as in TMR of fossils fuels might be expected in the Czech Republic, which could be counteracted by increase in DMI and TMR of metal ores/metal resources and non-metallic minerals/non-metallic resources. The future development of total DMI, TMR and material/resource intensity in both the Czech Republic and Germany will depend on further shifts to less material intensive industries and services and on increasing material efficiency in production and consumption of particular products. This is not only a technological, but also a social challenge, as there are barriers in current mode of governance and in shaping of current economic and social systems to do so.

Description: Biogas and bio-methane that are based on energy crops are renewable energy carriers and therefore potentially contribute to climate protection. However, significant greenhouse gas emissions resulting from agricultural production processes must be considered, mainly resulting from agricultural production processes, as fertilizer use, pesticide etc. This paper provides an integrated life cycle assessment (LCA) of biogas (i.e. bio-methane that has been upgraded and injected into the natural gas grid), taking into account the processes of fermentation, upgrading and injection to the grid for two different types of biogas plants thus examining the current state of the art as well as new, large-scale plants, operated by industrial players. Not only technical and engineering aspects are taken into account here, but also the choice of feedstock which plays an important role as to the overall ecological evaluation of bio-methane. The substrates evaluated in this paper - aside from maize - are rye, sorghum, whole-crop-silage from triticale and barley, and the innovative options of agricultural grass (Landsberger Gemenge, a mixture of hairy vetch (vicia villosa), crimson clover (trifolium incarnátum) and Italian ryegrass (lolium multiflorum)) as well as a combination of maize and sunflower.

Description: The North African countries Morocco, Algeria, Tunisia, Libya and Egypt have been and are currently experiencing rapid growth in energy demand. This development confronts their political leaders with the question of how to expand or diversify their countries' generation capacities. In this context, renewable energies and nuclear power constitute options that have rarely been exploited so far in the region. This article analyzes the drawbacks and benefits of both alternatives, with a special focus on import and export dynamics. When attempting to make the strategic decision between renewables and atomic power, North African regional specifics and circumstances have to be taken into account. Hence, in a first step, the article characterizes the energy systems of the North African countries and presents scenarios for their future development. In a second step, it scrutinizes the energy challenges these states face in terms of domestic concerns and foreign affairs. Finally, a case study of Algeria is used to demonstrate how renewable energies, but not nuclear power, are able to respond to North African energy challenges.

Description: The ongoing increase of the world population entails huge challenges for all countries' agro-food systems. Agriculture has to satisfy growing food requirements both in quantitative and qualitative terms, but the on hand natural resource stock is quickly depleting. Moreover, food production and energy production from biomass are competing for land. The thesis aims at measuring the environmental impact of nutrition in three agri-food systems. The study considers the amount of natural resources used in the production and consumption of food along its life-cycle. It is featured in two parts. In the first one the analysis is restricted to the supply chain of food, and provides a sustainability rating of thirty-seven products, grown through different agricultural practices. The second analysis takes into consideration all the value chain according to three paradigms of agri-food systems. They refers to different models of food production and consumption, observed in Italy. The first one is the dominant paradigm, including conventional and intensive farming practices, long and globalized food chains, retailing in supermarkets. The other models refer to Alternative Food Networks (AFN). The first is the GAS (Gruppi di Acquisto Solidali) initiative, i.e. solidarity purchasing groups, that manage collectively the purchasing of organic food and natural manufactured products mainly from local enterprises and farmers. They aim at accessing high quality and naturally grown food, avoiding the retailing passage and ensuring a fair price to the farmers. The third model refers to UPM (Un Punto Macrobiotico), an international association established in the Marche region in 1980. It manages and controls an entire food chain, since the agricultural production, based on the post-organic technique "Ma-Pi polyculture", till the food purchasing and catering, in sixty-three restaurants spread in the Italian territory. UPM is a very consumer-oriented food chain, in which a very exigent demand (in terms of food naturality and healthiness) drives the agricultural production towards the minimization of the external inputs employment. A further model concerns the reduction of the "Food Miles", i.e. the kilometres covered by food, since the dominant paradigm. Thus, in this model the distances are reduced by an average 90%, while the production practices do not change. The methodology used for assessing the sustainability of food is the Material Input Per Service unit (MIPS) indicator. It estimates the overall environmental pressure caused by products or services by indicating the life-cycle-wide consumption of natural resources in relation to the benefit provided. It includes five resource categories: abiotic and biotic materials (renewable resources), water, air and soil. Results of the first analysis provide a dataset of the material intensity of Italian agricultural products and foodstuffs, which can expedite future research on the topic of nutrition’s sustainability. The second analysis evaluates the natural resource demand for feeding one person during a week, in the paradigms under investigation. With respect to the dominant, the GAS model allows a 58% reduction in the abiotic resource demand, 53% in water and 71% in air. The UPM system, instead, permits a tenfold reduction in abiotic, biotic and water, and 82% decrease in the air category. The insight on the socio-economic features of the systems, together with the environmental sustainability measurement, allowed making some general conclusions and policy recommendations on the sustainability of the different food systems. The role of a low external input technology in agriculture is emphasized as a possible strategy for driving food system towards more sustainable patterns and empowering the small-scale farming.

Description: The importance of intact ecosystems for human-wellbeing as well as the dependence on functions and services they provide is undoubted. But still neither the costs of ecosystem degradation nor the benefits from ecosystem functions and services appear on socio-economic balance sheets when development takes place. Consequently overuse of natural resources is socio-economically promoted by conventional resource management policies and external effects (externalities), equally positives and negatives, remain unregarded. In this context the potential of payments for hydrological ecosystem services as a political instrument to foster sustainable natural resource use, and rural development shall be investigated. This paper introduces the principle concept of such payments, presents a case study from Nicaragua and highlights preliminary effects of the application of this instrument on natural resource use and development.

Description: The field of nutrition is facing numerous social, ecological and economic challenges in the coming decades. The food industry belongs to the most significant economic sectors worldwide and the increasing population of 9 billion in 2050 will cause a growing demand on food. So far, changing lifestyles, especially the global rising consumption of meat and dairy products are increasing environmental damage. Moreover our health and wellbeing are the direct result of healthy or unhealthy nourishment and influence follow-up indicators like individual and public health, the expense of the health sector and work productivity. The material footprint is a tool to measure and optimize the resource consumption of both products and their ingredients and the production processes along the whole value chain. It covers the whole life cycle of the products, from the extraction of raw materials to the processing industry, distribution, consumption, recycling, and disposal. In order to decrease resource consumption to a level in line with the planetary boundaries, the material footprint of household consumption should achieve a level of six to eight tonnes per capita in a year by 2050. This means a reduction in natural resource consumption by a factor of 5 to 10 in Western European countries. In order to ensure a decent lifestyle for all people in 2050, also the material footprint of nutrition has to be reduced significantly by 2050. The paper shows the relevance and role of nutrition in the overall material footprint of households on the basis of existing studies on the overall resource consumption caused by household consumption. Quantified meal and diet examples are given. It also discusses the causes of food waste and raises the question how a reduction of food waste is possible and can help decreasing the resource consumption in the food sector.

Description: Shifting the resource base for chemical and energy production from fossil feedstocks to renewable raw materials is seen by many as one of the key strategies towards sustainable development. The utilization of biomass for the production of fuels and materials has been proposed as an alternative to the petroleum-based industry. Current research and policy initiatives focus mainly on the utilization of lignocellulose biomass, originating from agriculture and forestry, as second generation feedstocks for the production of biofuels and electricity. These activities act on the assumption that significant amounts of biomass for non-food purposes are available. However, given a certain productivity per area, the current massive growth in global biofuels demand may in the long term only be met through an expansion of global arable land at the expense of natural ecosystems and in direct competition with the food-sector. Although many studies have shown the potential of biofuels production to reduce both, greenhouse gas emissions and non-renewable energy consumption, these production routes are still linear processes which depend on significant amounts of agricultural or forestry production area. Cascading use, i.e. when biomass is used for material products first and the energy content is recovered at end-of-life, may provide a greater environmental benefit than primary use as fuel. Considering waste and production residues as alternative feedstocks could help to further reduce pressures on global arable land. This research focused on thermochemical and biochemical technologies capable of utilizing organic waste or forestry residuals for energy, chemical feedstock, and synthetic materials (polymers) generation. Routes towards synthetic materials allow a closer cycle of materials and can help to reduce dependence on either fossil or biobased raw materials. The system-wide environmental burdens of three different technologies, including (1) municipal solid waste (MSW) gasification followed by Fischer-Tropsch synthesis (FTS), (2) plasma gasification of construction and demolition (C&D) wood for syngas production with energy recovery, and (3) forest residuals use in a biorefinery for polyitaconic acid (PIA) production, were assessed using life-cycle assessment. The first two studies indicated that MSW gasification and subsequent ethylene and polyethylene production via FTS has lower environmental impacts than conventional landfilling. In the future, as societies may shift towards the use of renewable energy, power offset by conventional waste-to-energy systems would not be as significant and chemicals production routes may then become increasingly competitive (in terms of environmental burdens) also to waste incineration. While production cost of Fischer-Tropsch derived chemicals seems not yet competitive to fossil-based chemicals provision, future price increases in global oil prices as well as changes in waste tipping fees, and efficiency gains on site of the waste conversion systems, may alter the economics and allow carbon recycling routes to reach a price competitive to fossil-based production routes. The third study found that plasma gasification of C&D wood for energy recovery has roughly similar environmental impacts than conventional fossil-based power systems. However, process optimization with respect to coal co-gasified, coke used as gasifier bed material, and fuel oil co-combusted in the steam boiler, would allow to significantly lower the system-wide environmental burdens. The fourth study looked at PIA production from softwood hemicellulose in a stream integrated approach (with the partially macerated wood and lignin being used in other existing processes such as pulp & paper plants for conventional pulp and bioenergy production). The assessment indicated lower global warming potential, energy demand, and acidification, for the wood-based PIA polymer, when compared to corn-based PIA and fossil-based polyacrylic acid (PAA). However, water use associated with wood-derived PIA was found to be higher than for fossil-based PAA production and land occupation is highest for the wood-derived polymer. It is hoped that results of this dissertation will add to the current debate on sustainable waste and biomass utilization and to establish future supply chains for green and sustainable chemical products.

Description: This brochure summarises key findings on energy solutions for the preparation and processing of food using local and renewable energy resources. More data, examples and information are available on the internet platform: www.wisions.net

Description: Purpose - Iran as an energy-rich country faces many challenges in the optimal utilization of its vast resources. High rates of population and economic growth, a generous subsidies program, and poor resource management have contributed to rapidly growing energy consumption and high energy intensity over the past decades. The continuing trend of rising energy consumption will bring about new challenges as it will shrink oil export revenues, restraining economic activities. This calls for a study to explore alternative scenarios for the utilization of energy resources in Iran. The purpose of this paper is to model demand for energy in Iran and develop two business-as-usual and efficiency scenarios for the period 2005-2030. Design/methodology/approach - The authors use a techno-economic or end-use approach to model energy demand in Iran for different types of energy uses and energy carriers in all sectors of the economy and forecast it under two scenarios: business as usual (BAU) and efficiency. Findings - Iran has a huge potential for energy savings. Specifically, under the efficiency scenario, Iran will be able to reduce its energy consumption 40 percent by 2030. The energy intensity can also be reduced by about 60 percent to a level lower than the world average today. Originality/value - The paper presents a comprehensive study that models the Iranian energy demand in different sectors of the economy, using data at different aggregation levels and a techno-economic end-use approach to illuminate the future of energy demand under alternative scenarios.

Description: The general conditions for local authorities in Germany have changed fundamentally during the last decades. Not only do municipalities compete with each other for employment, prestige and competitive advantages, they also face increasingly higher demands by their citizens, for instance in the area of climate protection. Therefore, every municipality has to consider various economic, social and ecological determinants in its decision-making processes. With respect to public buildings, an economically-oriented cost-benefit-analysis alone is not adequate due to a municipality's role as "consumer and role model". To identify measures with a broader benefit, a multicriteria analysis (MCA) has been used to analyze energy efficiency measures in public buildings for the city of Dortmund. For several years Dortmund has committed itself to implement energy efficiency measures and improve the energy performance of its building stock. Nevertheless, a benchmark analysis still shows a high energy saving potential that cannot be tapped with the existing measures and instruments. Therefore, a package of measures has been developed in close cooperation with the city of Dortmund, ranging broadly from measures of energetic retrofitting and green IT to behavioral change of building occupants. In the MCA these measures have been assessed according to ten different criteria such as innovativeness, cost effectiveness, external costs, CO2 reduction potential, local value or effort of implementation. Three different scenarios ("City as Role Model", "City as Homo Oeconomicus", "City as Climate Protector") show different municipal perspectives. The analysis has shown that the greatest benefit for municipalities, regardless of the municipal perspective, is yielded by measures such as voluntarily enhanced minimum standards for new or for energetic retrofitting of public buildings, the procurement of energy-efficient office equipment, the expansion of heat generation from renewable energies and the usage of private capital in participatory projects like "Solar&Save".

Description: CCS is discussed in a broad sense throughout Europe. In this paper a cautious, conservative estimate of CO2 storage capacity for Germany and its neighbouring countries where CO2 emissions from Germany could possibly be stored (Netherlands, France, Denmark, Norway, UK and Poland) is presented. Such a lower limit calculation is necessary for orientation purposes for potential investors and political decision-makers. Conservative CO2 sequestration capacity in deep saline aquifers for Germany is derived by the volumetric approach where parameters such as efficiency factor, CO2 density, porosity of the geological formation are of interest. It is assumed that every geological system is closed and thus an efficiency factor of 0.1 per cent (based on maximum pressure increase and total compressibility) for saline aquifers is applied. The capacity of German depleted oil and gas fields is based on cumulative recovery data and a sweep efficiency of 75 per cent. The storage capacity in the other considered countries, adjacent to Germany, are based on a critical review and adjustment of the results of the European reports JOULE II, GESTCO and GeoCapacity. The conservative capacities for all countries together amount to 49 Gt CO2, from which Norway and the UK provide 36 Gt, all offshore in the North Sea. Compared to the emissions from large point sources in these countries during 40 years (47.6 Gt of CO2), a virtual balance is achieved. This can only be reached, if a large scale CO2 pipeline system is installed to connect these countries, especially Germany, to the large sinks in the North Sea. If additional restrictions like source-sink matching, acceptance issues and injection rates constraints are taken into account, the available storage space gets increasingly scarce.

Description: The article estimates the natural resource consumption due to nutrition from the supply and demand sides. Using the MIPS (Material Input per Service Unit) methodology, we analyzed the use of natural resources along the supply chains of three Italian foodstuffs: wheat, rice and orange-based products. These figures were then applied for evaluating the sustainability of diets in 13 European countries. The results outline which phases in food production are more natural resource demanding than others. We also observed different levels of sustainability in the European diets and the effect of different foodstuffs in the materials, water and air consumption.

Description: This paper analyses drivers for resource use and material productivity acrosscountries. This is not only relevant in light of soaring raw material prices but also because EU policies, such as the "Thematic Strategy on the Sustainable Use of Natural Resources" (COM [2005] 670), the EU Raw Materials Initiative (COM [2008] 699) and various similar policies internationally, seek to better manage materials along their life-cycle and across economies. In order to better understand the system dynamics of material use, our paper applies methodologies of material flow analysis and regression analysis to identify the major drivers for resource use and decoupling from GDP. Drivers are understood as those factors that exert influence on human activities to use resources. A panel data set is taken for the European Union for the years 1980–2000 (EU-15) and 1992–2000 (EU-25). The main drivers of resource use were found to be energy efficiency, new dwellings and roads construction activities. Shortcomings of the methodology are also discussed.

Description: As illustrated by the case studies of end-of-life vehicles and waste electric and electronic equipment, the approach of an extended producer responsibility is undermined by the exports of used and waste products. This fact causes severe deficits regarding circular flows, especially of critical raw materials such as platinum group metals. With regard to global recycling there seems to be a responsibility gap which leads somehow to open ends of waste flows and a loss or down-cycling of potential secondary resources. Existing product-orientated extended producer responsibility (EPR) approaches with mass-based recycling quotas do not create adequate incentives to supply waste materials containing precious metals to a high-quality recycling and should be amended by aspects of a material stewardship. The paper analyses incentive effects on EPR for the mentioned product groups and metals, resulting from existing regulations in Germany. It develops a proposal for an international covenant on metal recycling as a policy instrument for a governance-oriented framework to initiate systemic innovations along the complete value chain taking into account product group- and resource group-specific aspects on different spatial levels. It aims at the effective implementation of a central idea of EPR, the transition of a waste regime still focusing on safe disposal towards a sustainable management of resources for the complete lifecycle of products.

Description: The study presents the results of an integrated assessment of carbon capture and storage (CCS) in the power plant sector in Germany, with special emphasis on the competition with renewable energy technologies. Assessment dimensions comprise technical, economic and environmental aspects, long-term scenario analysis, the role of stakeholders and public acceptance and regulatory issues. The results lead to the overall conclusion that there might not necessarily be a need to focus additionally on CCS in the power plant sector. Even in case of ambitious climate protection targets, current energy policy priorities (expansion of renewable energies and combined heat and power plants as well as enhanced energy productivity) result in a limited demand for CCS. In case that the large energy saving potential aimed for can only partly be implemented, the rising gap in CO2 reduction could only be closed by setting up a CCS-maximum strategy. In this case, up to 22% (41 GW) of the totally installed load in 2050 could be based on CCS. Assuming a more realistic scenario variant applying CCS to only 20 GW or lower would not be sufficient to reach the envisaged climate targets in the electricity sector. Furthermore, the growing public opposition against CO2 storage projects appears as a key barrier, supplemented by major uncertainties concerning the estimation of storage potentials, the long-term cost development as well as the environmental burdens which abound when applying a life-cycle approach. However, recently, alternative applications are being increasingly considered–that is the capture of CO2 at industrial point sources and biomass based energy production (electricity, heat and fuels) where assessment studies for exploring the potentials, limits and requirements for commercial use are missing so far. Globally, CCS at power plants might be an important climate protection technology: coal-consuming countries such as China and India are increasingly moving centre stage into the debate. Here, similar investigations on the development and the integration of both, CCS and renewable energies, into the individual energy system structures of such countries would be reasonable.

Description: Several energy scenario studies consider concentrated solar power (CSP) plants as an important technology option to reduce the world's CO2 emissions to a level required for not letting the global average temperature exceed a threshold of 2–2.4 °C. A global ramp up of CSP technologies offers great economic opportunities for technology providers as CSP technologies include highly specialised components. This paper analyses possible value creation effects resulting from a global deployment of CSP until 2050 as projected in scenarios of the International Energy Agency (IEA) and Greenpeace International. The analysis focuses on the economic opportunities of German technology providers since companies such as Schott Solar, Flabeg or Solar Millennium are among the leading suppliers of CSP technologies on the global market.

Description: Considering global warming, increasing commodity prices, and the dramatic consequences of the over-exploitation and overuse of resources, a transition to a renewable energy supply is necessary. This requires an (resource) efficient and renewable supply of operating reserve. In this article, a possible solution to this problem is analysed: the Desertec concept. It is meant to convert solar energy in areas with high solar irradiation into electrical energy by means of Concentrated Solar Power (CSP) transferring this energy by High Voltage Direct Current (HVDC) lines into the whole European Union Middle East and North Africa (EU-MENA) area. In order to assess the resource efficiency potential of Desertec, three different kinds of CSP plants (parabolic trough, Fresnel collector and central receiver of the building classes Inditep, Novatec and Solar Tres) including heat storage systems (Molten Salt and Phase-Changing-Material) and the necessary HVDC are analysed using the Material Input per Service Unit (MIPS) methodology. The assessment is accomplished for three different locations (Morocco, Tunisia and Egypt) and two points of time (2025 and 2050). With these results, a scenario of electricity supply in Germany in 2050 with a 20% share of solar power import is calculated. Central receivers are the most resource efficient ones: their consumption of abiotic materials is only half of parabolic trough plants and two thirds of Fresnel trough plants. Water and air consumption is the lowest of all analyzed CSP plants as well. The scenario for Germany's fuel mix in 2050 shows that a predominantly renewable fuel mix reduces the consumption of abiotic materials by 75%, of water by 60% and of air by 45%. Only the consumption of biotic materials rises due to the higher share of biomass conversion.

Description: Wind energy that can neither be fed into the grid nor be used regionally must be curtailed. This paper proposes different options to deal with such surplus wind energy amounts in a time horizon until 2020. It assesses their ability to handle the surplus energy in a sustainable way using a multi criteria analysis. The paper bases on a study that was prepared for the Ministry for Climate Protection, Environment, Agriculture, Nature Conservation and Consumer Protection of North Rhine-Westphalia between 2010 and 2012.

Description: The final report of the research project "Power Sector Decarbonisation: Metastudy" contains the various reports prepared by Öko-Institut and Wuppertal Institute during the course of the SEFEP funded project. A key objective of the project was to make a contribution to the debates within the European Union (EU) and Member States on the EU's Energy Roadmap 2050 publication, which was released in December 2011. This objective was achieved by systematically analysing and comparing recently published scenarios on the European electricity sector commissioned by a range of different stakeholders (environmental NGOs, industry and government agencies).