ALBERT

Description: The original set of botanical collections of the agronomist H.A. Homblé is conserved in the herbarium BR. Homblé was one of the first collectors (1911–1913) for the flora of Katanga, Democratic Republic of the Congo. Many Homblé specimens were described as taxonomic novelties; 107 tropical African plant species are named after him. Before his colonial career in Katanga, Homblé stayed about two years (1909–1911) in Guangxi, China. His incompletely labelled Chinese collections were erroneously considered as collected in Katanga. This supposed African origin has led to confusion with regard to the identification, and even resulted in the description of four species believed to be new for science. This paper presents and discusses Homblé’s collection made in Guangxi, and the assumed novelties in it. Drosera insolita is a synonym of the Asian Drosera lunata, widespread from India to Australia. Three other species are new synonyms. Caesalpinia homblei is a synonym of the pantropical Caesalpinia bonduc. Digitaria polybotryoides is a synonym of Digitaria abludens, a widespread species in tropical Asia. Grewia katangensis is the only species that proved to be synonymous with an endemic species, Grewia cuspidatoserrata, only known from S Yunnan, and here reported as a new record for Guangxi. Lysimachia candida and Impatiens chinensis should be deleted from the list of the Congo Flora. The importance of careful specimen labelling and label interpretation is discussed.

Description: Southern hemisphere humpback whale (Megaptera novaeangliae, SHHW) breeding populations follow a high-fidelity Antarctic krill (Euphausia superba) diet while feeding in distinct sectors of the Southern Ocean. Their capital breeding life history requires predictable ecosystem productivity to fuel migration and migration-related behaviours. It is therefore postulated that populations feeding in areas subject to the strongest climate change impacts are more likely to show the first signs of a departure from a high-fidelity krill diet. We tested this hypothesis by investigating blubber fatty acid profiles and skin stable isotopes obtained from five SHHW populations in 2019, and comparing them to Antarctic krill stable isotopes sampled in three SHHW feeding areas in the Southern Ocean in 2019. Fatty acid profiles and δ13C and δ15N varied significantly among all five populations, however, calculated trophic positions did not (2.7 to 3.1). Similarly, fatty acid ratios, 16:1ω7c/16:0 and 20:5ω3/22:6ω3 were above 1, showing that whales from all five populations are secondary heterotrophs following an omnivorous diet with a diatom-origin. Thus, evidence for a potential departure from a high-fidelity Antarctic krill diet was not seen in any population. δ13C of all populations were similar to δ13C of krill sampled in productive upwelling areas or the marginal sea-ice zone. Consistency in trophic position and diet origin but significant fatty acid and stable isotope differences demonstrate that the observed variability arises at lower trophic levels. Our results indicate that, at present, there is no evidence of a divergence from a high-fidelity krill diet. Nevertheless, the characteristic isotopic signal of whales feeding in productive upwelling areas, or in the marginal sea-ice zone, implies that future cryosphere reductions could impact their feeding ecology.

Description: 〈jats:p〉Food-webs are a critical feature of ecosystems and help us understand how communities will respond to climate change. The Southern Ocean is facing rapid and accelerating changes due to climate change. Though having evolved in an isolated and somewhat extreme environment, Southern Ocean biodiversity and food-webs are among the most vulnerable. Here, we review 1) current knowledge on Southern Ocean food-webs; 2) methods to study food-webs; 3) assessment of current and future impacts of climate change on Southern Ocean food-webs; 4) knowledge gaps; and 5) the role of Early Career Researchers (ECRs) in future studies. Most knowledge on Southern Ocean food-webs come from the pelagic environment, both at macro- and microbial levels. Modelling and diet studies of individual species are major contributors to the food-web knowledge. These studies revealed a short food-web, predominantly sustained by Antarctic Krill (〈jats:italic〉Euphausia superba〈/jats:italic〉). Additionally, alternative pathways exist, involving other krill species, fish, and squid, which play equally important roles in connecting primary producers with top predators. Advantages and disadvantages of several techniques used to study Southern Ocean food-webs were identified, from the classical analyses of stomach contents, scats, or boluses to the most recent approaches such as metabarcoding and trophic-biomarkers. Observations show that climate change can impact the food-web in different ways. As an example, changes to smaller phytoplankton species can lengthen the food-web, increasing assimilation losses and/or changing nutrient cycles. Future studies need to focus on the benthic-dominated food-webs and the benthopelagic coupling. Furthermore, research during the winter season and below the ice-shelves is needed as these areas may play a crucial role in the functioning of this ecosystem. ECRs can play a significant role in advancing the study of Southern Ocean food-webs due to their willingness for interdisciplinary collaboration and proficiency in employing various methodologies, contributing to the construction of high-resolution food-webs.〈/jats:p〉

Description: Arctic landscapes are characterized by diverse water bodies, which are covered with ice for most of the year. Ice controls surface albedo, hydrological properties, gas exchange, and ecosystem services, but freezing processes differ between water bodies. We studied the influence of geomor-phology and meteorology on winter ice of water bodies in the Lena Delta, Siberia. Electrical conductivity (EC) and stable water isotopes of ice cores from four winters and six water bodies were measured at unprecedented resolution down to 2-cm increments, revealing differences in freezing systems. Open-system freezing shows near-constant isotopic and EC gradients in ice, whereas closed-system freezing shows decreasing isotopic composition with depth. Lena River ice displays three zones of isotopic composition within the ice, reflecting open-system freezing that records changing water sources over the winter. The isotope composition of ice covers in landscape units of different ages also reflects the individual water reservoir settings (i.e., Pleistocene vs. Holocene ground ice thaw). Ice growth models indicate that snow properties are a dominant determinant of ice growth over winter. Our findings provide novel insights into the winter hydro-chemistry of Arctic ice covers, including the influences of meteorology and water body geomor-phology on freezing rates and processes.

Description: Volcanic rocks are the prominent host rocks in geothermal and volcanic systems in general, displaying heterogeneity. Although various external factors such as temperature, pressure, time, fluid chemistry, and subsurface geology have been thoroughly researched regarding the source of hydrothermal minerals in geothermal fields, the effect of hydrothermal alteration on volcanic hosts is still controversial in the literature. This review compiles data on the physical and mechanical properties of the host rocks composing volcanic environments exhibiting hydrothermal alteration or remaining unaltered. The considered data is originated from hydrothermal areas from Kuril-Kamchatka (Russia), Los Humeros (Mexico), Ngatamaraki, Rotokawa, Kawerau and Ohakuri geothermal fields and Mt. Ruapehu, Mt. Taranaki, and Whakaari volcanoes (New Zealand), Solfatara (Italy), Reykjanes, Nesjavellir, and Theistarereykir geothermal fields (Iceland), La Soufrière de Guadeloupe (Caribbean) volcano, and Merapi volcano (Indonesia). Analysis of average values displayed in several graphical representations and correlations finds that dense rocks (such as lavas and intrusive rocks) exhibit greater competence and lower porosity than fragmental rocks. However, altered dense rocks display greater variability in mechanical properties compared to pyroclastic rocks, primarily influenced by mineral dissolution leading to rock weakening. Exceptions occur for high-temperature hydrothermal alteration, such as advanced silicification and propylitic alteration, with the latter influenced by minor types of alteration. Fragmental rocks have diverse behaviour with the extent of hydrothermal alteration and welding/compaction. According to the compiled data, an overall strengthening of pyroclastic rocks develops as hydrothermal alteration increases, regardless of the type of hydrothermal alteration. The complexity of hydrothermal systems, the variability shown by different hydrothermal settings and histories in terms of temperature, fluid chemistry and secondary mineral assemblage, and the variety of rock materials with different microstructures contribute to moderate correlations between properties compared to those established in an unaltered state. However, the same trends (linear, nonlinear, positive, negative) are preserved along hydrothermal alteration. This review emphasizes the significance of the type and degree of hydrothermal alteration, along with the rock type and pre-existence of fractures, in shaping the development of alteration in volcanic environments and modifying the properties of host rocks. The relevance of the review relies on the fact that these properties are considered to enhance the productivity of geothermal fields and improve the assessment of volcanic hazards. Future research is expected to expand on this groundwork.

Description: Published

Description: 104754

Description: OSV4: Preparazione alle crisi vulcaniche

Description: JCR Journal

Description: Ground-based high resolution observations of downward longwave irradiance (DLI), surface air temperature, water vapour surface partial pressure and column amount, zenith sky infrared (IR) radiance in the atmospheric window, and all-sky camera images are regularly obtained at the Thule High Arctic Atmospheric Observatory (THAAO, 76.5° N, 68.8° W), North-West Greenland. The datasets for the years 2017 and 2018 have been used to assess the performance of different empirical formulas to infer clear sky DLI. An algorithm to identify clear sky observations has been developed, based on value, variability, and persistence of zenith sky IR radiance. Seventeen different formulas to estimate DLI have been tested against the THAAO dataset, using the originally determined coefficients. The formulas which combine information on total column water vapour and surface air temperature appear to perform better than others, with a mean bias with respect to the measured DLI smaller than 1 W/m2 and a root mean squared error (RMSE) around 6 W/m2. Some formulas, specifically developed for the Arctic, are found to produce poor statistical results; this is attributed partly to limitations in the originally used dataset, which does not cover a whole year, or is relative to very specific conditions (i.e., the ice sheet). The bias displays a significant improvement when the coefficients of the different formulas are calculated using the THAAO dataset. The presence of two full years of data allows the investigation of the inter-annual variability, and the use of different years for the determination of the coefficients and the evaluation of results. The smallest values of the bias and RMSE reach 0.1 W/m2 and 5 W/m2, respectively. Overall, best results are found for formulas which use both surface parameters and total water vapour column, and have been developed from global datasets. Conversely, formulas which express the atmospheric emissivity as a linear function of the logarithm of the column integrated water vapour appear to poorly reproduce the observations at THAAO.

Description: Published

Description: 1617–1632

Description: OSA2: Evoluzione climatica: effetti e loro mitigazione

Description: JCR Journal

Description: We aim to compute macroseismic parameters (location and magnitude) using the BOXER code for the first time on the citizen testimonies, that is, individual intensity data points (IDPs) at the global scale collected and made available by the LastQuake system of the European–Mediterranean Seismological Centre (EMSC). IDPs available for different earthquakes are selected to eliminate those that are geographically inconsistent with most data; then they are clustered spatially based on various methods. For each cluster with at least three IDPs, a macroseismic data point (MDP), corresponding to an intensity value assessed for given localities as in classical macroseismic studies, is computed by various central tendency estimators (average, median, and trimmed averages). Finally, macroseismic parameters are obtained by MDP distribution using two location methods of BOXER code. For each earthquake, we used raw and corrected intensities and 132 different combinations of grouping methods, estimators, and BOXER methods. We assigned a ranking to the combinations that best reproduce instrumental parameters and used such a ranking to select preferred combinations for each earthquake. We analyzed retrospectively the reliability of the parameters as a function of time and space. The results are essentially identical using original and corrected intensities and show higher reliability for BOXER’s method 1 than for method 0; they are dependent on the geographical area, and generally improve over time and with the number of IDPs collected. These findings are useful for the future real-time analyses, and for evaluating the location and magnitude of earthquakes whenever a sufficient number of IDPs are available and with a distribution such that MDPs can be derived and the BOXER method applied.

Description: Published

Description: 969–996

Description: OST4 Descrizione in tempo reale del terremoto, del maremoto, loro predicibilità e impatto

Description: JCR Journal

Description: The ability to predict the mobility of rock avalanches is necessary when designing strategies to mitigate the risks they pose. A popular mobility indicator of the flow front is the Heim’s apparent friction coefficient muH. In the field, muH shows a decrease in value as flow volume V increases. But this correlation has been a mystery as to whether it is due to a causal relationship between V and mobility since: (1) field data of muH do not collapse onto a single curve because typically widely scattered and (2) laboratory experiments have shown an opposite volume effect on the center of mass mobility of miniature flows. My numerical simulations confirm for the first time the existence of a functional relationship of scaling parameters where muH decreases as V increases in unsteady and nonuniform 3D flows. Data scatter is caused by muH that is affected by numerous other variables besides V. The interplay of these variables produces different granular regimes with opposite volume effects. In particular, muH decreases as V increases in the regime characterized by a relatively rough subsurface. The relationship holds for large-scale flows that, like rock avalanches, consist of a very large number of fine clasts traveling in wide channels. In these dense flows, flow front mobility increases as flow volume increases, as channel width increases, as grain size decreases, as basal friction decreases and as flow scale increases. Larger-scale flows are more mobile because they have larger Froude number values.

Description: Published

Description: 933–947

Description: OSV1: Verso la previsione dei fenomeni vulcanici pericolosi

Description: JCR Journal

Description: Underdetermination is a condition affecting all problems in seismic imaging. It manifests mainly in the nonuniqueness of the models inferred from the data. This condition is exacerbated if simplifying hypotheses like isotropy are discarded in favor of more realistic anisotropic models that, although supported by seismological evidence, require more free parameters. Investigating the connections between underdetermination and anisotropy requires the implementation of solvers which explore the whole family of possibilities behind nonuniqueness and allow for more informed conclusions about the interpretation of the seismic models. Because these aspects cannot be investigated using traditional iterative linearized inversion schemes with regularization constraints that collapse the infinite possible models into a unique solution, we explore the application of transdimensional Bayesian Monte Carlo sampling to address the consequences of underdetermination in anisotropic seismic imaging. We show how teleseismic waves of P and S phases can constrain upper‐mantle anisotropy and the amount of additional information these data provide in terms of uncertainty and trade‐offs among multiple fields.

Description: Published

Description: 1214–1226

Description: OST1 Alla ricerca dei Motori Geodinamici

Description: JCR Journal

Description: All Rights Reserved

Description: Predicting coastal change depends upon our knowledge of postglacial relative sea-level variability, partly controlled by glacio-isostatic responses to ice-sheet melting. Here, we reconstruct the postglacial relative sea-level changes along the Caribbean and Pacific coasts of northwestern South America by numerically solving the sea-level equation with two scenarios of mantle viscosity: global standard average and high viscosity. Our results with the standard model (applicable to the Pacific coast) agree with earlier studies by indicating a mid-Northgrippian high stand of ~2 m. The high-viscosity simulation (relevant to the Caribbean coast) shows that the transition from far- to intermediate-field influence of the Laurentide Ice Sheet occurs between Manzanillo del Mar and the Gulf of Morrosquillo. South of this location, the Colombian Caribbean coast has exhibited a still stand with a nearly constant Holocene relative sea level. By analyzing our simulations considering sea-level indicators, we argue that tectonics is more prominent than previously assumed, especially along the Caribbean coast. This influence prevents a simplified view of regional relative sea-level changes on the northwestern South American coast.

Description: Published

Description: 28-43

Description: OSA4: Ambiente marino, fascia costiera ed Oceanografia operativa

Description: JCR Journal

Description: The Algerian offshore earthquake of 18 March 2021, Mw 6.0, was felt by people in various Italian regions, also at large epicentral distance. This unusual human perception far from the source prompted us to analyze the waveforms recorded by land seismic stations installed along the Iberian, French, and Italian coasts. On some seismograms of the selected network, prominent T phases are detected. T waves can travel in the SOund Fixing And Ranging (SOFAR) channel over great distances (thousands of kilometers) with little loss in signal strength and be recorded by near‐coastal seismometers after the P (primary) and S (secondary) phases (hence T or tertiary phases). To explain the subjective perception of ground shaking with quantities that are measured on the seismogram, we estimated the empirical macroseismic intensities for both body and T phases and we calculated the body‐wave seismic attenuation. The P‐wave anelastic attenuation analysis shows two main wave propagation patterns that reflect lithosphere heterogeneity of the Algerian, Liguro‐Provençal, and Tyrrhenian basins. We find that in some cases, in particular along the Italian and French coasts, the largest ground shaking is caused by the T phase. Our observations confirm that the central‐western Mediterranean Sea is a favorable site for T‐wave propagation and suggest that the T phases should be taken into account in ground‐shaking hazard assessment for the central‐western Mediterranean.

Description: Published

Description: 859–869

Description: OST2 Deformazione e Hazard sismico e da maremoto

Description: JCR Journal

Description: Amplitude and phase scintillation indexes (S4 and SigmaPhi) provided by Ionospheric Scintillation Monitoring (ISM) receivers are the most used GNSS-based indicators of the signal fluctuations induced by the presence of ionospheric irregularities. These indexes are available only from ISM receivers which are not as abundant as other types of professional GNSS receivers, resulting in limited geographic distribution. This makes the scintillation indexes measurements rare and sparse compared to other types of ionospheric measurements available from GNSS receivers. Total Electron Content (TEC), on the other hand, is an ionospheric parameter available from a wide range of multi-frequency GNSS receivers. Many efforts have worked on establishing scintillation indicators based on TEC, and geodetic receivers in general, introducing various metrics, including the Rate of TEC change (ROT) and ROT Index (ROTI). However, a possible relationship between TEC and its variation, and the corresponding scintillation index that an Ionospheric Scintillation Monitor (ISM) receiver would estimate is not trivial. In principle, TEC can be retrieved from carrier phase measurements of the GNSS receiver, as . We investigate how to estimate SigmaPhi from time series of TEC and ROT measurements from an ISM in Ny-Ålesund (Svalbard) using Machine Learning (ML). To evaluate its usability to estimate SigmaPhi from geodetic receivers, the model is tested using TEC data provided by a quasi-co-located geodetic receiver belonging to the International GNSS Service (IGS) network. It is shown that the model performance when TEC from the IGS receiver is used gives comparable results to the model performance when TEC from the ISM receiver is utilised. The model's ability to infer the exact value of the scintillation index is bound to Mean Square Error (MSE) = 0.1 radians^2 when SigmaPhi 〈 0. 8 radians. For SigmaPhi 〉 0. 8 radians the MSE reaches 0.18 and 0.45 radians^2 in operative testing using ISM and IGS measurements, respectively. However, the model’s ability to detect phase scintillation from IGS TEC measurements is comparable to expert visual inspection. Such a model has potential in alerting against phase fluctuations resulting in enhanced SigmaPhi, especially in locations where ISM receivers are not available, but other types of dual-frequency GNSS receivers are present.

Description: Published

Description: 3753-3771

Description: OSA3: Climatologia e meteorologia spaziale

Description: JCR Journal

Description: This article presents the epistemological complexity inherent in the roll out of an international project on Disaster and Risk Reduction, and consequently about science education in the Indigenous context of Turkana County in Kenya. After an introduction that explains the current state of Disaster and Risk Reduction, the paper focuses on the ‘Paper Volcanoes Laboratory’ program and toolkit for children and teachers, which aims to spread awareness about natural hazards among children. The paper argues that the geographical, social and educational context where the project is carried out is critical to consider, and decolonial studies provide a conceptual and theoretical framework for this project. This allows to recognize reproduction of infantilization of Indigenous people and children through Western knowledge and science if implemented without consideration for local contexts, and demonstrates how Western educational projects have been a tool of discrimination and colonization. However, at the same time, it opens up the possibility for a dialogue and an encounter between the different epistemologies present in a project that was conceptualized within the Western context, but is to be carried out in Turkana County in Kenya.

Description: IUGG grant

Description: Published

Description: 197-213

Description: OSV4: Preparazione alle crisi vulcaniche

Description: JCR Journal

Description: In the online seminar series “Perspectives on Climate Sciences: from Historical Developments to Future Frontiers”, which took place during 2020–2021, well-known and established scientists from several fields – including mathematics, physics, climate science and ecology – presented their perspectives on the evolution of climate science and on relevant scientific concepts. This special issue aims to create a platform for a more detailed elaboration of the topics discussed in the seminars but also to publish new scientific findings. In this paper, we first give an overview of the content of the seminar series, and then we introduce the written contributions to this special issue. In line with the spirit of the seminar series, this paper is structured along thematic areas of the broad field of climate science, conveying different perspectives on the climate system: geophysical fluid dynamics, dynamical systems theory, multiscale processes, statistical physics, paleoclimate and the human dimension.

Description: Published

Description: 185–193

Description: OSA2: Evoluzione climatica: effetti e loro mitigazione

Description: JCR Journal

Description: Werecomputethecoefficients of the intensity prediction equation (IPE) in Italy using the data of the DBMI15 version 2.0 (v.2.0) intensity database and the instrumental and combined (instrumental plus macroseismic) magnitudes reported by the CPTI15 v.2.0 catalog. Wefollow the same procedure described in the previous article, consisting of a first step in which the attenuation of intensity I with respect to the distance D from macroseismic hypocenter is referred to the expected intensity at the epicenter IE and a second step in which IE is related to the instrumental magnitude Mi, the combined magnitude Mc,the epicentral intensity I0, and the maximum intensity Imax using error-in-variable (EIV) regression methods. The main methodological difference with respect to the original article concerns the estimation of the uncertainty of IE to be used for EIV regressions, which is empirically derived from the standard deviation of regression between IE and Mi and also used for the regressions of IE with Mc, I0,andImax. In summary, the new IPE determined from DBMI15 v.2.0 is I IE−0:0081D−h−1:072 lnD−lnh , in which D p R2 h2 , h = 4.49 km, and IE can be calculated from the intensity data distribution of the earthquake. If the intensity data distribution is not available, IE can be calculated from the following relationships IE −2:578 1:867Mw,IE I0.

Description: In press

Description: OST2 Deformazione e Hazard sismico e da maremoto

Description: JCR Journal

Description: This study aims at developing new macroseismic intensity attenuation models valid for Italy by exploiting the most updated macroseismic dataset and earthquakes catalogue, as well as the information obtained from a critical analysis of the most recent models in the literature. Several different attenuation models have been calibrated as a function of the moment magnitude (Mw) and epicentral distance from 16,260 intensity data points, that are related to 119 earthquakes occurred after 1900. According to trends and residuals analysis, the preferred calibrated intensity attenuation function is a Log-Linear model for epicentral distance (Repi in km) and a linear model for Mw as: I(MCS) = 1.81 − 2.61LogR − 0.0039R + 1.42Mw with pseudo hypocentral distance R = √R2 + (9.87)2 ; the estimated standard deviation is epi σ=0.75. Also noteworthy is another model for macroseismic intensity attenuation that proved to be as good as the best model and shows higher sensitivity to physical parameters, such as focal depth and magnitude, especially in the epicentral area. Performance of all calibrated models was also checked on an independent set of 15 post-1900 Italian earth- quakes. One of the results of the present work is the opportunity to define earthquake sce- narios (e.g. probabilistic seismic hazard maps) in terms of Macroseismic Intensity and its related standard deviation, avoiding the uncertainties due to the conversion of various ground shaking parameters into intensity values.

Description: Published

Description: 795–843

Description: OST2 Deformazione e Hazard sismico e da maremoto

Description: JCR Journal

Description: Climate change affects human activities, including tourism across various sectors and time frames. The winter tourism industry, dependent on low temperatures, faces significant impacts. This paper reviews the implications of climate change on winter tourism, emphasising challenges for activities like skiing and snowboarding, which rely on consistent snowfall and low temperatures. As the climate changes, these once taken-for-granted conditions are no longer as commonplace. Through a comprehensive review supported by up-to-date satellite imagery, this paper presents evidence suggesting that the reliability of winter snow is decreasing, with findings revealing a progressive reduction in snow levels associated with temperature and precipitation changes in some regions. The analysis underscores the need for concerted efforts by stakeholders who must recognize the reality of diminishing snow availability and work towards understanding the specific changes in snow patterns. This should involve multi-risk and multi-instrument assessments, including ongoing satellite data monitoring to track snow cover changes. The practical implications for sports activities and the tourism industry reliant on snow involve addressing challenges by diversifying offerings. This includes developing alternative winter tourism activities less dependent on snow, such as winter hiking, nature walks, or cultural experiences.

Description: Published

Description: 120554

Description: OSA2: Evoluzione climatica: effetti e loro mitigazione

Description: JCR Journal

Description: Italy has a long tradition of studies on the seismic history of the country and the neighboring areas. Several archives and databases dealing with historical earthquake data—primarily intensity data points—have been published and are constantly updated. Macroseismic fields of significant events are of foremost importance in assessing earthquake effects and for the evaluation of seismic hazards. Here, we adopt the U.S. Geological Survey (USGS)‐ShakeMap software to calculate the maps of strong ground shaking (shakemaps) of 79 historical earthquakes with magnitude ≥6 that have occurred in Italy between 1117 and 1968 C.E. We use the macroseismic data published in the Italian Macroseismic Database (DBMI15). The shakemaps have been determined using two different configurations. The first adopts the virtual intensity prediction equations approach (VIPE; i.e., a combination of ground‐motion models [GMMs] and ground‐motion intensity conversion equations [GMICEs]; Bindi, Pacor, et al., 2011; Oliveti et al., 2022b). The second exploits the intensity prediction equations (IPE; Pasolini, Albarello, et al., 2008; Lolli et al., 2019). The VIPE configuration has been found to provide more accurate results after appraisal through a cross‐validation analysis and has been applied for the generation of the ShakeMap Atlas. The resulting maps are published in the Istituto Nazionale di Geofisica e Vulcanologia (INGV) ShakeMap (see Data and Resources; Oliveti et al., 2023), and in the Italian Archive of Historical Earthquake Data (ASMI; see Data and Resources; Rovida et al., 2017) platforms.

Description: Published

Description: 21–37

Description: OST2 Deformazione e Hazard sismico e da maremoto

Description: JCR Journal

Description: The earthquake-resistant design of lifelines, such as pipelines, tunnels and bridges, is based on the reliable representation and estimation of the seismic loading. In the case of lifeline–fault crossings, the design fault displacement is typically derived from estimates based on fault dimensions via empirical fault scaling relations for a given “design” scenario event. This approach comes with an unknown level of safety because the fault productivity and the actual distribution of earthquake events are essentially disregarded. To overcome this challenge, a simplified approach is proposed by statistically analyzing the outcome of probabilistic fault displacement hazard analyses (PFDHAs). A selection of faults from the 2020 European Fault-Source Model is used to build the logic tree and to set the range of parameters considered in the PFDHAs. The methodology allows the (mostly conservative) approximation of the fault displacement corresponding to any given return period based on readily available data, namely fault productivity, fault mechanism, fault length, and lifeline crossing location on the fault. The proposed methodology has been proposed and adopted as an informative Annex in prEN 1998-4:2022.

Description: Open access funding provided by HEAL-Link Greece. The current work has been partially undertaken in as part of the Horizon 2020 Seismology and Earthquake Engineering Research Infrastructure Alliance in Europe (SERA, Grant Agreement No. 730900). The first and the second author have received partial funding from the European Union’s Horizon 2020 research and innovation programme “METIS-Seismic Risk Assessment for Nuclear Safety” under Grant Agreement No. 945121 and also, the financial support provided by the Hellenic Foundation for Research and Innovation (H.F.R.I.) under the “2nd Call for H.F.R.I. Research Projects to support Faculty Members & Researchers”, Project “TwinCity—Climate-Aware Risk and Resilience Assessment of Urban Areas under Multiple Environmental Stressors via Multi-Tiered Digital City Twinning” (Number: 2515) is gratefully acknowledged.

Description: Published

Description: 2677–2720

Description: OST2 Deformazione e Hazard sismico e da maremoto

Description: JCR Journal

Description: We analyze the interplay between hydrology, deformation and seismicity in the Matese massif, located in the Italian Southern Apennines. We find that this area is characterized by the concurrent action of two hydrologically-driven processes: the first is the deformation detected by GNSS data in the shallowest part (above the elevation of the major springs) of the Earth crust, in phase with the hydrological forcing; the second is the triggering of seismicity at depth with a delay suggesting a downward diffusive process. We study the first process by applying a Principal Component Analysis to the GNSS displacements time series, aiming to identify a common signal describing the largest data variance. We find that the maximum horizontal displacements associated with the first principal component (PC1) are larger than 1 cm in two GNSS sites and the PC1 temporal evolution is well correlated and in phase with the flow of the largest spring of the region, which we consider as proxy of the water content of the massif. This suggests that the main source of horizontal deformation is the water content fluctuations in the shallow portion of the Matese aquifer, in particular within fractures located in correspondence of the main mapped faults. The deformation rates caused by this process are one order of magnitude larger than the tectonic ones. Finally, we infer the second process by observing the correlation between the background seismicity and the spring discharge with a time lag of 121 days. In our interpretation, downward diffusive processes, driven by aquifer water content variations, propagate pore pressure waves that affect the faults strength favoring the occurrence of micro-earthquakes. This is supported by the values of hydraulic diffusivity (1.5 m^2/s) and rock permeability (3.2-3.8⋅10^−13 m^2), which are compatible with what is observed in karstified limestones.

Description: Published

Description: 1899–1912

Description: OST2 Deformazione e Hazard sismico e da maremoto

Description: JCR Journal

Description: The topside ionosphere extends from the F2-layer peak, where the electron density reaches its absolute maximum in the ionosphere, to the overlying plasmasphere and magnetosphere. In the topside ionosphere, the electron density decreases with height with a vertical variation rate strongly dependent on height itself. The last version of the International Reference Ionosphere (IRI) model, i.e., IRI-2020, describes this complex behavior through four topside options based on different sub-models (i.e., options) developed from the 1970s to the present. All these options have in common the F2-layer peak as an anchor point, while they differ in their topside electron density profile and/or plasma effective scale height formulations. In this work, we perform a validation of the accuracy of the four IRI-2020 topside options based on the comparison against in-situ electron density observations by Gravity Recovery and Climate Experiment (GRACE), Ionospheric Connection Explorer (ICON), and Defense Meteorological Satellite Program (DMSP) F15 low-Earth-orbit satellites. Datasets used in this study encompass observations recorded from 1999 to 2022, covering different diurnal, seasonal, and solar activity conditions, on a global basis and for the height range 400–850 km above the ground. The nearly two solar cycles dataset facilitated the evaluation of IRI-2020 topside options ability to reproduce the spatial and time variations of the topside ionosphere for different solar activity conditions. The weaknesses and strengths of each IRI-2020 topside option are highlighted and discussed, and suggestions on how to improve the modeling of the challenging topside ionosphere region within the IRI model are provided for future reference.

Description: In press

Description: OSA3: Climatologia e meteorologia spaziale

Description: JCR Journal

Description: This paper is intended as a short presentation of the main limitations affecting seismic hazard assessment, revisiting possible methods available in the literature to be applied for this purpose. The convergence of the African Plate with the Eurasian Plate is the cause of the high seismic activity characterizing the Mediterranean region, with particular intensity in its eastern part. It is clear that the associated seismic risk requires appropriate measures for its mitigation. Seismic risk, the amount of resources that the community is expected to pay to earthquakes in the long term, is the product of three factors, such as seismic hazard, vulnerability and value of the exposed goods. As earthquakes cannot be prevented, seismic risk can be mitigated by improving our knowledge of seismic hazard, which is largely based on statistical analysis of historical earthquake catalogs. Nevertheless, historical records are affected by problems of reliability, completeness and shortness, as they commonly span time lengths of the same order of magnitude or even shorter than the inter-event time of the strongest earthquakes produced by specific seismic sources. In this respect, alternative methods can be proposed for integrating and improving our knowledge of seismogenic processes, and estimating both time-independent and time-dependent occurrence rates of strong earthquakes. We propose the application of physics-based earthquake simulators, requiring the knowledge of a robust geological-geophysical seismogenic model.

Description: Published

Description: JCR Journal

Description: Volcanic hazards associated with lava flows advancing on snow cover are often underrated, although sudden explosions related to different processes of lava-snow/ice contact can occur rapidly and are only preceded by small, easily underrated precursors. On 16 March 2017, during a mildly effusive and explosive eruption at Mount Etna, Italy, a slowly advancing lava lobe interacted with the snow cover to produce a sudden, brief sequence of explosions. White vapor, brown ash, and coarse material were suddenly ejected, and the products struck a group of people, injuring some of them. The proximal deposit formed a continuous mantle of ash, lapilli, and decimeter-sized bombs, while the ballistic material travelled up to 200 m from the lava edge. The deposit was estimated to have a mass of 7.1 ± 0.8 × 104 kg, which corresponds to a volume of 32.0 ± 3.6 m3 of lava being removed by the explosion. Data related to the texture and morphology of the ejected clasts were used to constrain a model of lava-snow interaction. The results suggest that the mechanism causing the explosions was the progressive build-up of pressure due to vapor accumulation under the lava flow, while no evidence was found for the occurrence of fuel-coolant interaction processes. Although these low-intensity explosions are not particularly frequent, the data set collected provides, for the first time, quantitative information about the processes involved and the associated hazard and suggests that mitigation measures should be established to prevent potentially dramatic accidents at worldwide volcanoes frequented by tourists and with fairly easy access, such as Etna.

Description: Published

Description: 2325–2342

Description: OSV2: Complessità dei processi vulcanici: approcci multidisciplinari e multiparametrici

Description: JCR Journal

Description: The present work is part of a research program financed by INGV in order to look for traces of earthquakes occurred in the past on historical buildings. At that aim, a method based on remote sensing techniques was proposed and applied to San Giorgio parish church in Argenta (Ferrara, Italy). That church was chosen because of notable availability of historical and archaeological material, already catalogued in the past years, allowing the identification of structures belonging to periods before and after the 1624 earthquake. Data provided by terrestrial remote sensing techniques (digital photogrammetry supported by laser scanning) made possible the recognition of patterns that could be due to that strong seismic event or, in general, to one or more calamitous events. The results show that the proposed method can provide potentially useful data to help confirming or excluding historical hypotheses or helping to fill information gaps. However, it should be stressed that the proposed approach does not enable the identification of unknown seismic events, providing instead data that can be associated with already known events.

Description: INGV RIcerca Libera RESCUE (2021)

Description: Published

Description: SE109

Description: JCR Journal

Description: We present the first 3D crustal model of the epicentral region of the 1980, Mw 6.9, normal-faulting Irpinia earthquake (southern Italy) determined by jointly interpreting the CROP-04 deep seismic profile, a grid of commercial seismic lines, deep exploration wells, and a high-resolution Local Earthquake Tomography. Despite numerous seismotectonic surveys and source studies of the background seismicity recorded by dense networks, a complete 3D geological model of the mid-upper crust was still lacking in the region. The architecture of the Neogene fold-and-thrust belt is also debated, with competing thin- and thick-skinned tectonic interpretations. We use the 3D geological model derived from subsurface exploration data to interpret the upper crustal tomographic velocities in terms of rock physical properties, while Vp and Vp/Vs anomalies provide inferences on the deep structural setting down to 12 km depth. We find that a thick-skinned deformation style allows explaining the geometry of Pliocene fold-and-thrust systems deforming the Apulian carbonates but also deeper Permo-Triassic metasediments and the Paleozoic crystalline femic basement. Inherited compressional structures and lithological heterogeneities control background seismicity occurring at two crustal levels. Fluid-driven shallow seismicity (〈4–6 km) concentrates in a high-Vp/Vs wedge of fractured, brine-saturated Mesozoic stiff rocks delimited by the 1980 earthquake faults. Deep seismicity (9–14 km) clusters instead within the low-Vp/Vs crystalline basement underneath the Apulian carbonate ramp-anticlines. Commercial seismic data allow us to identify the Irpinia Fault, the main fault ruptured by the 1980 earthquake, reinforcing its previous interpretations as an immature structure with subtle geological and geophysical evidence.

Description: Published

Description: e2023TC008056

Description: OST1 Alla ricerca dei Motori Geodinamici

Description: JCR Journal

Description: Seismic wave attenuation is a key feature of seismic wave propagation that provides constraints on the composition and physical state of the medium within the Earth. We separated intrinsic and scattering attenuation coefficients for the shallow crust and lower crust/upper mantle in the Mt. Etna area. For this purpose, the Multiple Lapse Time Window Analysis (MLTWA) was applied to two groups of earthquakes, well separated in depth. We also studied the spatial variation of the attenuation parameters by dividing the study area into four sectors around Etna. The results show an effective homogeneity of the propagation characteristics inside Etna and, in particular, some lateral variations and minor variations with depth. We observe that structural discontinuities and lithology control scattering losses at all frequencies, with higher scattering in the shallow crust. The intrinsic absorption shows no sensitivity to the presence of these main geological structures and is quite uniform for different depths. Furthermore, compared to the northern sector of the volcano, the southern one shows stronger scattering attenuation at low frequencies. This pattern correlates well with the high seismic activity along most of Etna’s active tectonic structures and ascending magmatic fluids that characterize this sector of the volcano. Although we only discuss the differences in the ‘‘average’’ scattering and inelastic properties of the investigated volumes, the results of this study are very informative about the characteristics of each region. Moreover, they suggest that a future study is necessary, providing a more detailed picture of the spatial distribution of seismic attenuation in the study area, through a 3D inversion of the attenuation parameters estimated along the single source-receiver paths.

Description: Published

Description: 171–187

Description: OSV2: Complessità dei processi vulcanici: approcci multidisciplinari e multiparametrici

Description: JCR Journal

Description: A detailed study of past eruptive activity is crucial to understanding volcanic systems and associated hazards. We present a meticulous stratigraphic analysis, a comprehensive chronological reconstruction, thorough tephra mapping, and a detailed analysis of the interplay between primary and secondary volcanic processes of the post-900 AD activity of La Fossa caldera, including the two main systems of La Fossa volcano and Vulcanello cones (Vulcano Island, Italy). Our analyses demonstrate how the recent volcanic activity of La Fossa caldera is primarily characterized by effusive and Strombolian activity and Vulcanian eruptions, combined with sporadic sub-Plinian events and both impulsive and long-lasting phreatic explosions, all of which have the capacity to severely impact the entire northern sector of Vulcano island. We document a total of 30 eruptions, 25 from the La Fossa volcano and 5 from Vulcanello cones, consisting of ash to lapilli deposits and fields of ballistic bombs and blocks. Volcanic activity alternated with significant erosional phases and volcaniclastic re-sedimentation. Large-scale secondary erosion processes occur in response to the widespread deposition of fine-grained ash blankets, both onto the active cone of La Fossa and the watersheds conveying their waters into the La Fossa caldera. The continuous increase in ground height above sea level, particularly in the western sector of the caldera depression where key infrastructure is situated, is primarily attributed to long-term alluvial processes. We demonstrate how a specific methodological approach is key to the characterization and hazard assessment of low-to-high intensity volcanic activity, where tephra is emitted over long time periods and is intercalated with phases of erosion and re-sedimentation.

Description: Open access funding provided by Istituto Nazionale di Geofisica e Vulcanologia within the CRUI-CARE Agreement.

Description: Published

Description: 47

Description: OSV2: Complessità dei processi vulcanici: approcci multidisciplinari e multiparametrici

Description: JCR Journal

Description: The Canary Islands endemic Bolle's Laurel Pigeon Columba bollii was described as a species in 1872 by Godman. A specimen of the same species collected more than 75 years earlier, during the 1796–98 expedition commanded by Baudin, was instead believed to be an example of the Jamaican endemic, Ring-tailed Pigeon Patagioenas caribaea (Jacquin, 1784). However, in 1827 its identity had been questioned by Wagler, who believed the specimen represented a separate Caribbean species that he named Columba Lamprauchen. Although Wagler's name is senior to Godman's, we demonstrate that, following the International code of zoological nomenclature, Columba bollii should be used as the correct name for this Canarian species.

Description: Orchidantha anthracina (Lowiaceae), discovered at the south central coast of Vietnam, is described and illustrated, bringing the total number of species in the family to 26, of which four occur in Vietnam. The notes on distribution, habitat and etymology are given and a preliminary conservation assessment is provided. The species is compared with O. vietnamica, with which it shares flowers of similar size and colours, but from which it is readily distinguished by a narrow and strongly reflexed dorsal sepal and spreading lateral sepals, not supporting the labellum. Notes with additional comparisons to all species with a similar arrangement of lateral sepals are also provided.

Description: The recent rise in ocean temperatures, accompanied by other environmental changes, has notably increased the occurrence and spread of diseases in Octocorallia, many species of which are integral to shallow tropical and subtropical coral reef ecosystems. This study focuses on the understanding of these diseases, which has been largely limited to symptomatic descriptions, with clear etiological factors identified in only a fraction of cases. A key example is the multifocal purple spots syndrome (MFPS) affecting the common Caribbean octocoral sea fan Gorgonia ventalina, linked to the gall-forming copepods of the genus Sphaerippe, a member of the widespread family, Lamippidae. The specialized nature of these copepods as endoparasites in octocorals suggests the potential for the discovery of similar diseases across this host spectrum. Our investigation employed four molecular markers to study disease hotspots in Saint Eustatius, Curaçao, northwest and southwest Cuba, and Bonaire. This led to the discovery of a group of copepod species in these varied Caribbean locations. Importantly, these species are morphologically indistinguishable through traditional methods, challenging established taxonomic approaches. The observed diversity of symbionts, despite the host species’ genetic uniformity, is likely due to variations in larval dispersal mechanisms. Our phylogenetic analyses confirmed that the Lamippidae copepods belong to the order, Poecilostomatoida (Copepoda), and revealed their sister group relationship with the Anchimolgidae, Rhynchomolgidae, and Xarifiidae clades, known for their symbiotic relationships with scleractinian corals. These results add to our understanding of the evolutionary and ecological interactions of copepods and their hosts, and the diseases that they cause, and are important data in a changing climate.

Description: Three new species combinations are made under Villaria for the Philippine endemics Hypobathrum coriaceum, H. multibracteatum and H. purpureum. Morphological features of these three Hypobathrum species revealed a closer resemblance with Villaria than with Hypobathrum, as the three Philippine endemics possess a unilocular ovary with parietal placentation; a character that is not found in any genera of Octotropideae except in Villaria. Lectotypes and a neotype are selected.

Description: 1. Wetland ecosystems worldwide are threatened by habitat alteration, climate change and the introduction of invasive species, even within protected areas. Unravelling the reliance of sensitive wetland-dwelling species, such as amphibians, on habitat characteristics is thus essential to identify conservation targets. 2. Here we assess the distribution of genetic diversity of two strongly aquatic amphibians (Pelophylax perezi and Pleurodeles waltl) in association with habitat features across the most extensive, protected wetland of the Iberian Peninsula: Doñana National Park. 3. Despite inhabiting a protected area free from anthropogenic barriers, the genetic diversity of P. perezi and P. waltl is not homogeneously distributed across the wetland, but instead concentrates in core areas, mainly in the northern zone. Both genetic diversity and connectivity (as opposed to genetic differentiation) showed significant positive associations with the area of the breeding sites and the flooded area surrounding the breeding sites within the dispersal potential of either species, that is nearby pond availability. 4. Large water bodies connected to abundant temporary ponds are key for the maintenance of amphibian genetic diversity. Nevertheless, the core populations of our target species, which show markedly aquatic habits, are concentrated in areas colonised by invasive species, which could compromise their long-term viability. 5. Our results highlight that maintaining widely connected arrays of ponds of different hydroperiods, including large breeding sites free from invasive predators and competitors, is paramount for amphibian conservation in Mediterranean wetlands.

Description: Tropical marine lakes are small land-locked marine waterbodies occurring in karstic coastal areas. During biodiversity surveys in 12 marine lakes in Raja Ampat, Southwest Papua province, Indonesia, we recorded at least 37 species belonging to 29 genera of hard corals. Their observed associated symbiont fauna consisted of bivalve molluscs and polychaete worms. Marine lake temperature ranged from 30.0 to 32.5 °C, acidity from pH 7.6 to 8.1, and salinity from 26.4 to 33.2 ppt. This study provides the first inventory of the marginal coral communities in the extreme habitat of marine lakes, under chronic extreme environmental conditions of higher temperatures, land-based nutrient loads, and sedimentation.

Description: Monitoring community composition of Foraminifera (single-celled marine protists) pro-vides valuable insights into environmental conditions in marine ecosystems. Despitethe efficiency of environmental DNA (eDNA) and bulk-sample DNA (bulk-DNA) me-tabarcoding to assess the presence of multiple taxa, this has not been straightforwardfor Foraminifera partially due to the high genetic variability in widely used ribosomalmarkers. Here, we test the correctness in retrieving foraminiferal communities by me-tabarcoding of mock communities, bulk-DNA from coral reef sediment samples, andeDNA from their associated ethanol preservative using the recently sequenced cy-tochrome c oxidase subunit 1 (COI) marker. To assess the detection success, we com-pared our results with large benthic foraminiferal communities previously reportedfrom the same sampling sites. Results from our mock communities demonstrate thatall species were detected in two mock communities and all but one in the remainingfour. Technical replicates were highly similar in number of reads for each assigned ASVin both the mock communities and bulk-DNA samples. Bulk-DNA showed a signifi-cantly higher species richness than their associated eDNA samples, and also detectedadditional species to what was already reported at the specific sites. Our study con-firms that metabarcoding using the foraminiferal COI marker adequately retrieves thediversity and community composition of both the mock communities and the bulk-DNA samples. With its decreased variability compared with the commonly used nu-clear 18 S rRNA, the COI marker renders bulk-DNA metabarcoding a powerful tool toassess foraminiferal community composition under the condition that the referencedatabase is adequate to the target taxa.

Description: Shallow-water rhodolith beds are rare in the Mediterranean Sea and generally poorly known. The Punta de la Mona rhodolith bed extends for 16,000 square meters in shallow and oligotrophic waters at the southern coast of Spain, off Almuñecar in the Alborán Sea. We present a detailed analysis of the structure (rhodolith cover and density, rhodolith size and shape, sediment granulometry) and morphospecies composition of the bed along a depth gradient. A stratified sampling was carried out at six depths (9, 12, 15, 18, 21, and 24 m), estimating rhodolith cover and abundance; rhodoliths were collected from one 30 by 30 cm quadrat for each transect, resulting in 18 samples and a total of 656 rhodoliths. The collected rhodoliths were measured and the coralline algal components identified morphoanatomically through a stereomicroscope and SEM. Sediment on the seafloor mainly consisted of pebbles and cobbles; the highest rhodolith cover occurred between 15 and 18 m, and the lowest at the shallowest and deepest transects (9 and 24 m). Mean Rhodolith size was similar throughout the depth range (23–35 mm) with a slight increase at 24 m, although the largest rhodoliths occurred at 21 m. In monospecific rhodoliths, size depended more on the forming species than on depth. We found 25 non-geniculate coralline morphospecies, nearly all rhodolith-forming morphospecies reported in the Mediterranean Sea in recent accounts. The highest morphospecies richness (18–19) and proportional abundance were found at intermediate depths (15–18 m), where rhodolith cover is also highest. Lithophyllum incrustans and Lithophyllum dentatum dominated at shallow depths (9–12 m), whereas Lithothamnion valens was the dominant species at intermediate and greater depths. Overall, the latter species was the most common in the rhodolith bed. The shallow-water rhodolith bed in Punta de la Mona is probably the most diverse in the Mediterranean Sea. This highlights the importance of the conservation of this habitat and, in general, emphasizes the role of the Alborán Sea as a diversity center of coralline algae. The Punta de la Mona example contradicts the common assumption in the geological literature that rhodolith beds are indicative of oligophotic environments with high nutrients levels.

Description: Marine Isotope Stage 5e (MIS 5e; the Last Interglacial, 125 ka) represents a process analog for a warmer world. Analysis of sea-level proxies formed in this period helps in constraining both regional and global drivers of sea-level change. In Southeast Asia, several studies have reported elevation and age information on MIS 5e sea-level proxies, such as fossil coral reef terraces or tidal notches, but a standardized database of such data was hitherto missing. In this paper, we produced such a sea-level database using the framework of the World Atlas of Last Interglacial Shorelines (WALIS; https://warmcoasts.eu/world-atlas.html). Overall, we screened and reviewed 14 studies on Last Interglacial sea-level indicators in Southeast Asia, from which we report 43 proxies (42 coral reef terraces and 1 tidal notch) that were correlated to 134 dated samples. Five data points date to MIS 5a (80 ka), six data points are MIS 5c (100 ka), and the rest are dated to MIS 5e. The database compiled in this study is available at https://doi.org/10.5281/zenodo.5040784 (Maxwell et al., 2021).

Description: Traditional morphological methods for species identification are highly time consuming, especially for small organisms, such as Foraminifera, a group of shell-building microbial eukaryotes. To analyze large amounts of samples more efficiently, species identification methods have extended to molecular tools in the last few decades. Although a wide range of phyla have good markers available, for Foraminifera only one hypervariable marker from the ribosomal region (18S) is widely used. Recently a new mitochondrial marker cytochrome oxidase subunit 1 (COI) has been sequenced. Here we investigate whether this marker has a higher potential for species identification compared to the ribosomal marker. We explore the genetic variability of both the 18S and COI markers in 22 benthic foraminiferal morphospecies (orders Miliolida and Rotaliida). Using single-cell DNA, the genetic variability within specimens (intra) and between specimens (inter) of each species was assessed using next-generation sequencing. Amplification success rate was twice as high for COI (151/200 specimens) than for 18S (73/200 specimens). The COI marker showed greatly decreased intra- and inter-specimen variability compared to 18S in six out of seven selected species. The 18S phylogenetic reconstruction fails to adequately cluster multiple species together in contrast to COI. Additionally, the COI marker helped recognize misclassified specimens difficult to morphologically identify to the species level. Integrative taxonomy, combining morphological and molecular characteristics, provides a robust picture of the foraminiferal species diversity. Finally, we suggest the use of a set of sequences (two or more) to describe species showing intra-genomic variability additionally to using multiple markers. Our findings highlight the potential of the newly discovered mitochondrial marker for molecular species identification and metabarcoding purposes.

Description: Coral reefs are the most biodiverse marine ecosystems, and host a wide range of taxonomic diversity in a complex spatial community structure. Existing coral reef survey methods struggle to accurately capture the taxonomic detail within the complex spatial structure of benthic communities. We propose a workflow to leverage underwater hyperspectral image transects and two machine learning algorithms to produce dense habitat maps of 1150 m2 of reefs across the Curaçao coastline. Our multi-method workflow labelled all 500+ million pixels with one of 43 classes at taxonomic family, genus or species level for corals, algae, sponges, or to substrate labels such as sediment, turf algae and cyanobacterial mats. With low annotation effort (only 2% of pixels) and no external data, our workflow enables accurate (Fbeta of 87%) survey-scale mapping, with unprecedented thematic detail and with fine spatial resolution (2.5 cm/pixel). Our assessments of the composition and configuration of the benthic communities of 23 image transects showed high consistency. Digitizing the reef habitat and community structure enables validation and novel analysis of pattern and scale in coral reef ecology. Our dense habitat maps reveal the inadequacies of point sampling methods to accurately describe reef benthic communities.

Description: Ecological regime shifts in the marine realm have been recorded from a variety of systems and locations around the world. Coral reefs have been especially affected, with their benthic habitat changing from a dominance of stony corals to a dominance of other organisms such as fleshy algae. To detect changes in the benthic habitat of coral reefs, simple tools applicable on a global scale are necessary for future monitoring programs. Hence, the aim of this research is to explore the hypothesis that shifts in assemblages of large benthic foraminifera (LBF) can detect early signs of degradation in the reef benthic habitat. To do so, data on living assemblages of LBF collected between 1997 and 2018 at 12 islands in the Spermonde Archipelago (South Sulawesi, Indonesia) were analyzed. Foraminiferal specimens were morphologically identified to the species level and statistical analyses performed to assess changes in their assemblage composition. A clear temporal shift was observed. Typical foraminiferal assemblages in a coral-dominated (e.g., Amphistegina lobifera, Calcarina spengleri, Heterostegina depressa) and fleshy algaedominated (e.g., Neorotalia gaimardi, C. mayori) reef habitats were identified and significantly linked to the substrate type. Other species (e.g., Elphidium spp., Peneroplis planatus and Sphaerogypsina globulus) seem to reflect a spatial and temporal gradient of anthropogenic pollution from local inhabited islands and ongoing urban development on the mainland. Hence communities of LBF consistently follow gradual shifts in environmental conditions. Additionally to foraminiferal assemblages being an indicator for actual reef condition, closely monitoring LBF may provide early information on reef degradation, in time to take action against identified stressors (e.g., eutrophication or intensive fishing) at local and regional scales. The circumtropical distribution of LBF is such that they can be included worldwide in reef monitoring programs, conditional to calibration to the regional species pool.

Description: In a marine environment that is rapidly changing due to anthropogenic activities and climate change, area-based management tools are often used to mitigate threats and conserve biodiversity. Marine protected areas (MPAs) are amongst the most widespread and recognized marine conservation tools worldwide, however, MPAs alone are inadequate to address the environmental crisis. The promotion of other effective area-based conservation measures (OECMs) under draft Target 3 of the Post-2020 Global Biodiversity Framework, i.e., conserving 30% of marine areas by 2030, holds promise to acknowledge sites and practices occurring beyond MPAs that contribute to conservation. Here, we evaluate the potential recognition of OECMs into Indonesia's national policy framework on marine resource management and provide the first-ever overview of distribution and types of potential marine OECMs in Indonesia, including a review of the existing evidence on conservation effectiveness. We identified 〉 390 potential marine OECMs, led by government, customary and local communities, or the private sector, towards diverse management objectives, including habitat protection, traditional/customary management, fisheries, tourism, or other purposes. While some evidence exists regarding the conservation effectiveness of these practices, the long-term impacts on biodiversity of all potential marine OECMs in Indonesia are unknown. Many OECM elements have been included in several national policies, yet there are no established mechanisms to identify, recognize and report sites as OECMs in Indonesia. We propose four transformational strategies for future OECM recognition in Indonesia, namely: (i) safeguard customary and traditional communities, (ii) leverage cross-sector and cross-scale collaboration, (iii) focus on delivering outcomes, and (iv) streamline legal frameworks. Our study shows that OECMs have the potential to play a significant role in underpinning marine area-based conservation in Indonesia, including supporting the Government of Indonesia in reaching national and international conservation targets and goals.

Description: Lots of creatures live in coral reefs, including some tiny ones you might never have heard of. In this article, we will tell you about the importance of Foraminifera (also called forams), unicellular organisms with shells, that contribute to coral reefs in many ways. Just like corals, some forams living on the seafloor live closely together with microalgae. Some forams also thrive in similar environmental conditions (sunlight, temperature, salt) as corals. For this reason, forams can be used as reef “sensors”, to keep track of the overall health of coral reefs. They can even help to detect poor environmental conditions that might harm coral growth in the future. In this article, we will look at a study of an Indonesian reef ecosystem in which the foram communities living on the seafloor were monitored between 1997 and 2018.

Description: Borys Malkin (1917-2009) is arguably one of the most important yet least known twentieth-cen-tury collectors of Indigenous material culture from South America, with especially numerous collecting expeditions to the Amazon region. In fact, his contact with museums worldwide and the systematic way in which he collected and sold his materials can be characterized as a form of wholesale collecting that rested upon the creation of chains of supply and demand typical of a market economy. In this article, we explore the ways in which Malkin engaged with Indigenous peoples, intermediaries, and museums in South America, North America and in Europe in order to create this network of “producers” or “suppliers”, on the one hand, and potential buyers on the other. We do so by presenting information about the scope and breadth of his Indigenous collections, and then investigating his modus operandi. We conclude that the successful spreading of his collections in various museums and the constant pres-ence in exhibitions of objects from collections formed by Malkin shaped, in a significant way, the face of Lowland South America in ethno-graphic museums of the Global North.

Description: Here we present the experimental design and results from a new mid-Pliocene simulation using the latest version of the UK's physical climate model, HadGEM3-GC31-LL, conducted under the auspices of CMIP6/PMIP4/PlioMIP2. Although two other palaeoclimate simulations have been recently run using this model, they both focused on more recent periods within the Quaternary, and therefore this is the first time this version of the UK model has been run this far back in time. The mid-Pliocene Warm Period, ∼3 Ma, is of particular interest because it represents a time period when the Earth was in equilibrium with CO2 concentrations roughly equivalent to those of today, providing a possible analogue for current and future climate change. The implementation of the Pliocene boundary conditions is firstly described in detail, based on the PRISM4 dataset, including CO2, ozone, orography, ice mask, lakes, vegetation fractions and vegetation functional types. These were incrementally added into the model, to change from a pre-industrial setup to a Pliocene setup. The results of the simulation are then presented, which are firstly compared with the model's pre-industrial simulation, secondly with previous versions of the same model and with available proxy data, and thirdly with all other models included in PlioMIP2. Firstly, the comparison with the pre-industrial simulation suggests that the Pliocene simulation is consistent with current understanding and existing work, showing warmer and wetter conditions, and with the greatest warming occurring over high-latitude and polar regions. The global mean surface air temperature anomaly at the end of the Pliocene simulation is 5.1 ∘C, which is the second highest of all models included in PlioMIP2 and is consistent with the fact that HadGEM3-GC31-LL has one of the highest Effective Climate Sensitivities of all CMIP6 models. Secondly, the comparison with previous generation models and with proxy data suggests a clear increase in global sea surface temperatures as the model has undergone development. Up to a certain level of warming, this results in a better agreement with available proxy data, and the “sweet spot” appears to be the previous CMIP5 generation of the model, HadGEM2-AO. The most recent simulation presented here, however, appears to show poorer agreement with the proxy data compared with HadGEM2 and may be overly sensitive to the Pliocene boundary conditions, resulting in a climate that is too warm. Thirdly, the comparison with other models from PlioMIP2 further supports this conclusion, with HadGEM3-GC31-LL being one of the warmest and wettest models in all of PlioMIP2, and if all the models are ordered according to agreement with proxy data, HadGEM3-GC31-LL ranks approximately halfway among them. A caveat to these results is the relatively short run length of the simulation, meaning the model is not in full equilibrium. Given the computational cost of the model it was not possible to run it for a longer period; a Gregory plot analysis indicates that had it been allowed to come to full equilibrium, the final global mean surface temperature could have been approximately 1.5 ∘C higher.

Description: The Maritime Continent (MC) forms the western boundary of the tropical Pacific Ocean, and relatively small changes in this region can impact the climate locally and remotely. In the mid-Piacenzian warm period of the Pliocene (mPWP; 3.264 to 3.025 Ma) atmospheric CO2 concentrations were ∼ 400 ppm, and the subaerial Sunda and Sahul shelves made the land–sea distribution of the MC different to today. Topographic changes and elevated levels of CO2, combined with other forcings, are therefore expected to have driven a substantial climate signal in the MC region at this time. By using the results from the Pliocene Model Intercomparison Project Phase 2 (PlioMIP2), we study the mean climatic features of the MC in the mPWP and changes in Indonesian Throughflow (ITF) with respect to the preindustrial. Results show a warmer and wetter mPWP climate of the MC and lower sea surface salinity in the surrounding ocean compared with the preindustrial. Furthermore, we quantify the volume transfer through the ITF; although the ITF may be expected to be hindered by the subaerial shelves, 10 out of 15 models show an increased volume transport compared with the preindustrial. In order to avoid undue influence from closely related models that are present in the PlioMIP2 ensemble, we introduce a new metric, the multi-cluster mean (MCM), which is based on cluster analysis of the individual models. We study the effect that the choice of MCM versus the more traditional analysis of multi-model mean (MMM) and individual models has on the discrepancy between model results and data. We find that models, which reproduce modern MC climate well, are not always good at simulating the mPWP climate anomaly of the MC. By comparing with individual models, the MMM and MCM reproduce the preindustrial sea surface temperature (SST) of the reanalysis better than most individual models and produce less discrepancy with reconstructed sea surface temperature anomalies (SSTA) than most individual models in the MC. In addition, the clusters reveal spatial signals that are not captured by the MMM, so that the MCM provides us with a new way to explore the results from model ensembles that include similar models.

Description: Despite increasing recognition of the need for more diverse and equitable representation in the sciences, it is unclear whether measurable progress has been made. Here, we examine trends in authorship in coral reef science from 1,677 articles published over the past 16 years (2003–2018) and find that while representation of authors that are women (from 18 to 33%) and from non-OECD nations (from 4 to 13%) have increased over time, progress is slow in achieving more equitable representation. For example, at the current rate, it would take over two decades for female representation to reach 50%. Given that there are more coral reef non-OECD countries, at the current rate, truly equitable representation of non-OECD countries would take even longer. OECD nations also continue to dominate authorship contributions in coral reef science (89%), in research conducted in both OECD (63%) and non-OECD nations (68%). We identify systemic issues that remain prevalent in coral reef science (i.e., parachute science, gender bias) that likely contribute to observed trends. We provide recommendations to address systemic biases in research to foster a more inclusive global science community. Adoption of these recommendations will lead to more creative, innovative, and impactful scientific approaches urgently needed for coral reefs and contribute to environmental justice efforts.

Description: Mangrove forests provide valuable ecosystem services to coastal communities across tropical and subtropical regions. Current anthropogenic stressors threaten these ecosystems and urge researchers to create improved monitoring methods for better environmental management. Recent efforts that have focused on automatically quantifying the above-ground biomass using image analysis have found some success on high resolution imagery of mangrove forests that have sparse vegetation. In this study, we focus on stands of mangrove forests with dense vegetation consisting of the endemic Pelliciera rhizophorae and the more widespread Rhizophora mangle mangrove species located in the remote Utría National Park in the Colombian Pacific coast. Our developed workflow used consumer-grade Unoccupied Aerial System (UAS) imagery of the mangrove forests, from which large orthophoto mosaics and digital surface models are built. We apply convolutional neural networks (CNNs) for instance segmentation to accurately delineate (33% instance average precision) individual tree canopies for the Pelliciera rhizophorae species. We also apply CNNs for semantic segmentation to accurately identify (97% precision and 87% recall) the area coverage of the Rhizophora mangle mangrove tree species as well as the area coverage of surrounding mud and water land-cover classes. We provide a novel algorithm for merging predicted instance segmentation tiles of trees to recover tree shapes and sizes in overlapping border regions of tiles. Using the automatically segmented ground areas we interpolate their height from the digital surface model to generate a digital elevation model, significantly reducing the effort for ground pixel selection. Finally, we calculate a canopy height model from the digital surface and elevation models and combine it with the inventory of Pelliciera rhizophorae trees to derive the height of each individual mangrove tree. The resulting inventory of a mangrove forest, with individual P. rhizophorae tree height information, as well as crown shape and size descriptions, enables the use of allometric equations to calculate important monitoring metrics, such as above-ground biomass and carbon stocks.

Description: The global navigation satellite system (GNSS)-interferometric reflectometry technique has been applied to retrieve snow depth, which has a high potential for application. The GNSS reflectometry classical algorithm retrieves the snow depth by extracting the frequency of the multipath signal and substituting it into an empirical formula. However, the retrieval errors of high and low snow depths are large due to the influence of factors such as surface vegetation and terrain environment. In this paper, we propose a snow depth retrieval algorithm based on a particle swarm optimized long short-term memory (PSO-LSTM) neural network. The algorithm extracted three characteristic parameters (frequency, amplitude, and phase) from the signal-to-noise ratio (SNR) data as inputs, and optimized the LSTM hyperparameters by the PSO algorithm to improve the retrieval accuracy for low snow depths and snow depths close to the antenna. The snow depth retrieval results of global positioning system L1 band SNR data collected from the P351 station in 2022 and AB33 station in 2017 were evaluated in this paper. The snow depth retrieval results of the PSO-LSTM algorithm for P351 station were in high agreement with the snow depth data provided by the snowpack telemetry network; the coefficient of determination () reached 0.986, and the root mean square error (RMSE) and mean absolute error (MAE) were 7.30 cm and 4.94 cm, respectively. Compared with the classical algorithm, the PSO-LSTM algorithm decreased the RMSE and MAE by 53.0% and 30.4% for the retrieval results of snow depths below 15 cm at the P351 station, and by 76.8% and 84.4% for the retrieval results of snow depths above 117 cm from the 1st day to the 137th day, respectively. Similarly, the RMSE, MAE, and for the 2017 retrieval results at AB33 station were 5.90 cm, 4.25 cm, and 0.965, respectively. Compared with the classical algorithm, the PSO-LSTM algorithm decreased the RMSE and MAE by 47.9% and 33.0% for the retrieval results of snow depths below 15 cm at the AB33 station, and by 75.4% and 82.3% for the retrieval results of snow depths above 56 cm from the day 46 to day 120. In addition, the snow depth retrieval algorithm was proposed in this paper does not require antenna height and empirical formulas to realize snow depth retrieval, and at the same time, the algorithm effectively improved the retrieval accuracy for both high and low snow depths with strong robustness.

Description: This study contributes to geothermal exploration in 1660–1520 Ma old, reworked bedrock in Sweden. Our primary objectives are to constrain the orientation of horizontal stresses, and to discuss implications for geothermal exploration. High-resolution acoustic televiewer image data reveal the downhole distribution of stress indicators (borehole breakouts, drilling-induced fractures and petal centreline fractures) and pre-existing structures (natural fractures, foliation). About 135 m of stress indicators are measured from 0.2–1.0 km. The results suggest a uniform NNW–SSE mean maximum horizontal stress orientation. A total of 1525 pre-existing structures (natural fractures, foliation) are mapped in borehole GE-1. The prevailing stress regime controls whether natural fractures and foliation are well-oriented for stimulation. For strike-slip and normal faulting stress regimes, well-oriented fractures steeply dip towards the WSW. For a reverse faulting stress regime, shallow dipping fractures are well-oriented for stimulation. The downhole distribution of stress indicators and other stress measurements in the region and other parts of Fennoscandia tentatively suggest a strike-slip stress regime, but additional studies are needed to constrain the complete stress field at study depth and towards engineered geothermal systems reservoir target depths. Our secondary objective is to highlight that interpretation of high-resolution acoustic data, particularly in metamorphic crystalline rocks, is subjective and that more guidelines for data interpretation are needed. The interactive interpretation of the images is based on visual analyses of complex pre-existing structures and stress indicators with highly variable shapes. The application of three methods for data analyses in the GE-1 borehole proposes that drilling-induced fractures are little influenced by the method applied. Interpretations on individual borehole breakout azimuths may, however, result in over 10° differences in orientation.

Description: New inorganic and organic geochemical data from thucholite in the Upper Permian (Wuchiapingian) Kupferschiefer (T1) shale collected at the Polkowice-Sieroszowice Cu-Ag mine in Poland are presented. Thucholite, which forms spherical or granular clusters, appears scattered in the T1 dolomitic shale at the oxic-anoxic boundary occurring within the same shale member. The composition of thucholite concretions and the T1 shale differs by a higher content of U- and REE-enriched mineral phases within the thucholite concretions compared to the T1 shale, suggesting a different mineralising history. The differences also comprise higher Ntot, Ctot, Htot, Stot contents and higher C/N, C/S ratios in thucholite than in the T1 shale. The hydrocarbon composition of the thucholite and the surrounding T1 shale also varies. Both are dominated by polycyclic aromatic compounds and their phenyl derivatives. However, higher abundances of unsubstituted polycyclic aromatic hydrocarbons in the thucholite are indicative of its pyrogenic origin. Pyrolytic compounds such as benz[a]anthracene or benzo[a]pyrene are more typical of the thucholite than the T1 shale. Microscopic observations of the thucholite and its molecular composition suggest that it represents well-rounded small charcoal fragments. These charcoals were formed during low-temperature combustion, as confirmed by semifusinite reflectance values, indicating surface fire temperatures of about 400 °C, and the absence of the high-temperature pyrogenic polycyclic aromatic hydrocarbons. Charred detrital particles, likely the main source of insoluble organic matter in the thucholite, migrated to the sedimentary basin in the form of spherical carbonaceous particulates, which adsorbed uranium and REE in particular, which would further explain their different contents and sorption properties in the depositional environment. Finally, the difference in mineral content between thucholite and the T1 shale could also have been caused by microbes, which might have formed biofilms on mineral particles, and caused a change in the original mineral composition.

Description: Soil bacterial communities play a critical role in shaping soil stability and formation, exhibiting a dynamic interaction with local climate and soil depth. We employed an innovative DNA separation method to characterize microbial assemblages in low-biomass environments such as deserts and distinguish between intracellular DNA (iDNA) and extracellular DNA (eDNA) in soils. This approach, combined with analyses of physicochemical properties and co-occurrence networks, investigated soil bacterial communities across four sites representing diverse climatic gradients (i.e., arid, semi-arid, Mediterranean, and humid) along the Chilean Coastal Cordillera. The separation method yielded a distinctive unimodal pattern in the iDNA pool alpha diversity, increasing from arid to semi-arid climates and decreasing in humid environments, highlighting the rapid feedback of the iDNA community to increasing soil moisture. In the arid region, harsh surface conditions restrict bacterial growth, leading to peak iDNA abundance and diversity occurring in slightly deeper layers than the other sites. Our findings confirmed the association between specialist bacteria and ecosystem-functional traits. We observed transitions from Halomonas and Delftia, resistant to extreme arid environments, to Class AD3 and the genus Bradyrhizobium, associated with plants and organic matter in humid environments. The distance-based redundancy analysis (dbRDA) analysis revealed that soil pH and moisture were the key parameters that influenced bacterial community variation. The eDNA community correlated slightly better with the environment than the iDNA community, whereas the iDNA community was more sensitive to changes in soil physicochemical parameters. Soil depth was found to influence the iDNA community significantly but not the eDNA community, which might be related to depth-related metabolic activity. Our investigation into iDNA communities uncovered deterministic community assembly and distinct co-occurrence modules correlated with unique bacterial taxa, thereby showing connections with sites and key environmental factors. The study additionally revealed the effects of climatic gradients and soil depth on living and dead bacterial communities, emphasizing the need to distinguish between iDNA and eDNA pools.

Description: The Gram-positive, rod-shaped endophytic bacterium Cellulomonas sp. strain ATA003 was isolated from the endemic cactus Maihueniopsis domeykoensis seeds collected in the Coastal Atacama Desert, Chile. Here, we present a circular genome with a size of 4,084,881 bp and a GC content of 73.8% obtained by Nanopore sequencing.

Description: Geomechanics play an important role in any underground activity, such as carbon dioxide (CO2) and hydrogen (H2) geo-storage, owing to the considerable hazards linked to the injection and withdrawal of fluids into and from the subsurface. In order to quantify these risks, knowledge of full stress tensor is required. Yet, most of our stress information in the Australian target basins for geo-storage is limited to the stress orientations, while stress magnitude data is sparse. 3D geomechanical modelling has proved to be an invaluable tool for prediction of full stress tensor. Nevertheless, a model requires some stress magnitude data in order to tune the model to be representative of real stress state. In situations where stress magnitude data is lacking, this means that the model is susceptible to significant uncertainties. Herein, we present a novel strategy for stress modelling, which involves the utilisation of indirect data such as borehole breakouts, drilling-induced fractures, seismic activity records, and formation integrity tests to calibrate a 3D geomechanical model. We employ the northern Bowen Basin, an onshore basin in Queensland, Australia, as a case study for a comprehensive 3D geomechanical modelling approach. We assess all the indirect information in the model’s volume to narrow down the model predictions and find the most reliable stress state. This innovative approach is an important step forward in stress modelling of Australian basins, where lack of stress magnitudes is a great challenge for geomechanical assessment of geo-storage.

Description: Chromium (Cr) leached from iron (Fe) (oxyhydr)oxide-rich tropical laterites can substantially impact downstream groundwater, ecosystems, and human health. However, its partitioning into mineral hosts, its binding, oxidation state, and potential release are poorly defined. This is in part due to the current lack of well-designed and validated Cr-specific sequential extraction procedures (SEPs) for laterites. To fill this gap, we have (i) first optimized a Cr SEP for Fe (oxyhydr)oxide-rich laterites using synthetic and natural Cr-bearing minerals and laterite references, (ii) used a complementary suite of techniques and critically evaluated existing non-laterite and non-Cr-optimized SEPs, compared to our optimized SEP, and (iii) confirmed the efficiency of our new SEP through analyses of laterites from the Philippines. Our results show that other SEPs inadequately leach Cr host phases and underestimate the Cr fractions. Our SEP recovered up to seven times higher Cr contents because it (a) more efficiently dissolves metal-substituted Fe phases, (b) quantitatively extracts adsorbed Cr, and (c) prevents overestimation of organic Cr in laterites. With this new SEP, we can estimate the mineral-specific Cr fractionation in Fe-rich tropical soils more quantitatively and thus improve our knowledge of the potential environmental impacts of Cr from lateritic areas.

Description: A multisite method of fragments-based rainfall temporal (daily to hourly) disaggregation procedure conditioned on circulation pattern (CP) classification is developed and applied to the German part of the Rhine river basin. The performance of the CP-based disaggregation in representing key rainfall characteristics is evaluated and the influence of different number of CP classes is investigated. Compared with the standard (monthly-based) method of fragments disaggregation, the CP-based procedure including a seasonal stratification improves the disaggregation quality in hourly rainfall extremes, although it shows no improvement in reproducing standard rainfall statistics, such as mean and standard deviation. CP classifications with more classes tend to perform better in representing hourly rainfall statistics in the Rhine basin. The developed procedure opens up the possibility to consider dynamic changes in the atmosphere, such as changes in the frequency, persistence and seasonality of circulation patterns, that may be associated with climate change.

Description: Organic phosphates (OP) are important nutrient components for living cells in natural environments, where they readily interact with ubiquitous iron phases such as hydrous ferric oxide, ferrihydrite (FHY). FHY partakes in many key bio(geo)chemical reactions including iron-mediated carbon storage in soils, or iron-storage in living organisms. However, it is still unknown how OP affects the formation, structure and properties of FHY. Here, we document how β-glycerophosphate (GP), a model OP ligand, affects the structure and properties of GP–FHY nanoparticles synthesized by coprecipitation at variable nominal molar P/Fe ratios (0.01 to 0.5). All GP–FHY precipitates were characterized by a maximum solid P/Fe ratio of 0.22, irrespective of the nominal P/Fe ratio. With increasing nominal P/Fe ratio, the specific surface area of the GP–FHY precipitates decreased sharply from 290 to 3 m2 g−1, accompanied by the collapse of their pore structure. The Fe–P local bonding environment gradually transitioned from a bidentate binuclear geometry at low P/Fe ratios to monodentate mononuclear geometry at high P/Fe ratios. This transition was accompanied by a decrease in coordination number of edge-sharing Fe polyhedra, and the loss of the corner-sharing Fe polyhedra. We show that Fe(III) polymerization is impeded by GP, and that the GP–FHY structure is highly dependent on the P/Fe ratio. We discuss the role that natural OP-bearing Fe(III) nanophases have in biogeochemical reactions between Fe–P and C species in aquatic systems.

Description: Using Challenging Minisatellite Payload and the Republic of China Satellite-1 observations, the response of ionospheric radial current (IRC) in the F region to the enhancement of merging electric field (Em) at different magnetic local times (MLT) is investigated. Possible physical mechanisms are discussed in terms of neutral wind, conductivity, and prompt penetration electric field (PPEF). The disturbance IRC (ΔIRC) increases in the upward (downward) direction in the daytime (nighttime) within 3 hr after Em enhancement. However, disturbance zonal winds increase westward (eastward) at 12–18 MLT (00–06 MLT). The reduced F region electron density may help weaken IRC at 06–12 MLT and 18–24 MLT. This work indicates that the daytime eastward (nighttime westward) PPEF drives equatorward (poleward) Hall current (JH) at low latitudes, resulting in both upward (downward) ΔIRC and eastward (westward) plasma drift at the F region magnetic equator.

Description: Satellite altimetry has revolutionized river monitoring, particularly for hydrologists working on river flow monitoring in sparsely or ungauged areas. Despite this, there's a lack of a comprehensive evaluation of radar and lidar altimeters with varying sensor specifications for river water level retrieval, seasonal change characterization, and water surface slope (WSS) using gauged long-term water level and global navigation satellite system (GNSS) data. This study addresses this gap by combined evaluation of radar (ENVISAT to Sentinel-3) and lidar (ICESat-1, ICESat-2) altimeters along the Ganga River, from Prayagraj to Varanasi. We found that, all the radar altimetry missions showed better accuracy for water level retrievals (R2 〉 = 0.8; RMSE 0.11 to 1.16 m) and water level change quantification (RMSE 0.59 m). However, Sentinel-3 with SAR acquisition mode outperformed (RMSE 0.11 to 0.14 m) all the radar missions having low resolution mode. Despite lidar missions' high vertical accuracy, they show relatively lower accuracy in water level time series generation due to non-repeating characteristics. In contrary, ICESat-2 demonstrates potential in capturing spatial and seasonal variability of WSS, enhancing the accuracy of SWOT discharge products when combined with SWOT River database (SWORD). This study provides a comprehensive baseline for end-users interested in utilizing radar and lidar missions for various hydrological applications, including river discharge estimation. Moreover, the studied river reach shares the SWOT calibration orbit, allowing the utilization of generated satellite and in-situ databases for the effective evaluation of SWOT measurements.

Description: A large dataset of detrital zircon U–Pb ages (N = 5940) of Aptian-Albian strata of the Colombian-Ecuadorian retroarc region suggests that these rocks were sourced from Proterozoic cratonic and Permian–Triassic to Cretaceous rocks of the Andean proto-Cordilleras. The nonconformity between Aptian-Albian strata and Proterozoic rocks of the Garzón Massif indicates the existence of positive relief in this region. Topographic highs could have caused local basin compartmentalization and the prevalence of a localized provenance of coeval strata. Areas of positive relief were seemingly exposed to intense chemical weathering as suggested by the high Chemical Index of Alteration values, and low Rb/Sr and SiO2/Al2O3 ratios of analysed strata. Our results highlight the value of provenance analysis to study the ancient topography of retroarc systems and open the avenue for further research on the role of extensional tectonics in the topographic and basin evolution in the Andes.

Description: Compound weather and climate events have obtained increasing attention in recent years in the context of anthropogenic climate change. Compound pluvial-fluvial flooding (CPFF), usually referring to the superposition of heavy local rainfall in urban areas and riverbank overflow, is however rarely investigated. We perform a systematic literature review on this emerging topic and identify knowledge gaps. Major knowledge gaps concern the dependence between pluvial and fluvial flooding, and thus the co-occurrence probability, and its past and (possible) future changes. Although it is expected that CPFF increases in a warming world, we could not identify a single attempt to understand temporal changes. More systematic and comprehensive data collection and process documentation, particularly for pluvial and flash floods, are required to better understand and assess CPFF. Another major gap is the limitation of CPFF studies to hazard assessments. Implementing damage models would allow, with modest effort, to transfer hazard statements into risk statements. This would allow, in turn, to understand the scale of the problem in terms of societal relevance.

Description: Recent studies increasingly recognize the importance of critical-zone weathering during mountain building for long-term CO2 drawdown and release. However, the focus on near-surface weathering reactions commonly does not account for CO2 emissions from the crust, which could outstrip CO2 drawdown where carbonates melt and decarbonize during subduction and metamorphism. We analyse water chemistry from streams in Italy’s central Apennines that cross a gradient in heat flow and crustal thickness with relatively constant climatic conditions. We quantify the balance of inorganic carbon fluxes from near-surface weathering processes, metamorphism and the melting of carbonates. We find that, at the regional scale, carbon emissions from crustal sources outpace near-surface fluxes by two orders of magnitude above a tear in the subducting slab characterized by heat flow greater than 150 mW m–2 and crustal thickness of less than 25 km. By contrast, weathering processes dominate the carbon budget where crustal thickness exceeds 40 km and heat flow is lower than 30 mW m–2. The observed variation in metamorphic fluxes is one to two orders of magnitude larger than that of weathering fluxes. We therefore suggest that geodynamic modulations of metamorphic melting and decarbonation reactions are an efficient process by which tectonics can regulate the inorganic carbon cycle.

Description: This paper introduces the Graphics Processing Unit (GPU)-based tool Geo-Temporal eXplorer (GTX), integrating a set of highly interactive techniques for visual analytics of large geo-referenced complex networks from the climate research domain. The visual exploration of these networks faces a multitude of challenges related to the geo-reference and the size of these networks with up to several million edges and the manifold types of such networks. In this paper, solutions for the interactive visual analysis for several distinct types of large complex networks will be discussed, in particular, time-dependent, multi-scale, and multi-layered ensemble networks. Custom-tailored for climate researchers, the GTX tool supports heterogeneous tasks based on interactive, GPU-based solutions for on-the-fly large network data processing, analysis, and visualization. These solutions are illustrated for two use cases: multi-scale climatic process and climate infection risk networks. This tool helps one to reduce the complexity of the highly interrelated climate information and unveils hidden and temporal links in the climate system, not available using standard and linear tools (such as empirical orthogonal function analysis). Teleconnection analysis of climate data is an established research field analyzing network interactions in the climate system. Furthermore, the investigation over types of networks such as electricity, trading, or flight become more into focus in the context of climate related research, with respect to both climate mitigation and adaptation. These fields produce a multitude of complex, heterogeneous, geo-referenced climate related networks. Due to the size and the different properties of such networks, their investigation is not trivial. In the sense of the counterpart to sophisticated machine learning algorithms, visual analytics methods are crucial analyzing these networks visually, interactively keeping the climate researcher in the investigation loop. Existing visualization solutions can tackle the specifics of these networks only partially, in particular, they have problems with the size, geo-reference, their interlinkage, and the time-dependency of these kinds of complex networks. Filling this gap, we have developed a new visualization tool, which intensively uses the abilities of sophisticated graphic card processors to process large amounts of network data in a very fast and parallel manner. The abilities and flexibility of the proposed approach are illustrated for a classical climate teleconnection example and for a temperature-based infection disease network on flight routes.

Description: In this work, prominent longitudinal variation of polar electrojet (PEJ) and field-aligned currents (FACs) are reported for the first time in different local times and hemispheres. Larger longitudinal differences exist mostly in the south than in the north with nearly opposite phase except for the nighttime. The most prominent longitudinal variation occurs around noontime. In the nighttime, the longitudinal changes of PEJ and upward FACs in both hemispheres are similar. The larger northern summer FACs and PEJ at noon occur more frequently around 0°–60° and 300°–360° magnetic longitude (MLon), while the larger southern summer currents occur around 120°–300° MLon. The summer-winter hemispheric differences in PEJ and upward FACs disappear in the midnight sector. The northern FACs dominance exists around 0°–120° and 270°–360° MLon, except for winter when the northern dominance of upward FACs at night exist in nearly all longitudes. In local summer, PEJ shows northern dominance around 0°–60° and 270°–360° MLon, and southern dominance around 120°–240° MLon. In local winter, PEJ shows northern dominance around 180° MLon near midnight, while in most other local times, PEJ shows northern dominance around 270° MLon. These longitudinal, seasonal and hemispheric differences are discussed in terms of mixing effects of ionospheric conductance and merging electric field in different local time sectors.

Description: The Claromecó foreland Basin (Carboniferous–Permian; southern Buenos Aires province, Argentina) is key to understanding the paleotectonic evolution of the southwestern Gondwana margin and is relevant to energy resource exploration. This study reconstructs the thermal and burial history of the Claromecó Basin by integrating geochemical data, organic petrology, and thermal modeling techniques. Cores samples of the Tunas Formation (Pillahuincó Group, Early Permian) were studied. A 1D thermal model was constructed, calibrated with vitrinite reflectance measurements (VRo %), and corroborated with fluid inclusion and apatite fission track data from previous studies. Rock-Eval pyrolysis results show TOC% values ranging from 0.13 to 60.35 wt%. The Hydrogen index (HI 〈 50 mg HC/g TOC) and Oxygen index (OI 〈 50 mg CO2/g TOC) indicate the dominance of Type III and Type IV kerogens, most likely resulting from the thermal maturation of an original Type III kerogen. Petrologic observations confirm the presence of macerals from the inertinite group, as well as minor amounts of vitrinite and liptinite. The Tmax displays a temperature range mostly from 460 to 610 °C. The VRo % values range from 1.5 to 2.0%. Geochemical data combined with VRo % measurements confirm a late catagenesis to metagenesis stage within the wet to dry gas window for coals and organic-rich strata. In order to constrain the thermal evolution of the basin infill, different scenarios were tested by varying the heat flow and the missing section thickness associated with the uplift and erosion of the basin (Permian–Cenozoic unconformity). The best calibration results were obtained with an erosion thickness of 3000 up to 4200 m and paleo heat flow peaks of either 60 or 80 mW/m2 during the Lower Permian–Lower Cretaceous. The Tunas Formation was deposited and buried during the Permian–Triassic (Gondwanides Orogeny phase), reaching a maximum temperature of 180 °C. The results obtained by combining geochemical analysis, organic petrology, and thermal modeling techniques indicate that the coal beds of the Tunas Formation could have a current potential as gas-prone source rocks. Despite that, the hydrocarbon generation capacity of coal levels is currently low due to the high percentage of residual (Type IV) kerogen. Further research could help clarify if the hydrocarbons potentially expelled by these source rocks have been lost due to migration or could be trapped somewhere in the basin.

Description: Using the electron density (Ne) observations from the Defense Meteorological Satellite Program, and Constellation Observing Systems for Meteorology, Ionosphere, and Climate mission and simulations from the Thermosphere Ionosphere Electrodynamic General Circulation Model. we investigate the dynamic evolution of the polar tongue of ionization (TOI) from double to single structures at different altitudes during a geomagnetic storm. The modeled Ne depicted that double and single TOIs occurred at altitudes above 300 km, respectively. During the northward turning of interplanetary magnetic field (IMF) Bz, the afternoon TOI disappeared and the morning TOI was reduced. The plasma transport due to neutral winds and ambipolar diffusion facilitated (prevented) the depletion of plasma density of the morning TOI at 300 (500) km, with a relative contribution of 42.8% and 28.6% (−15.4% and −76.9%), respectively. Downward E × B drifts led to an enhancement/reduction of plasma density in the storm enhanced density region in the lower/upper ionosphere. During the duskward turning of IMF By, the morning TOI could be mostly attributed to the anti-sunward plasma drifts (75.8% at 300 km, 100% at 500 km), with a relatively stronger role of the zonal component than that of meridional E × B drifts. The upward E × B drifts were important/ignorable in the upper/lower ionosphere. Both the neutral winds and ambipolar diffusion resulted in an accumulation of plasma density of the morning TOI at 300 km indirectly (24.2%), however, their roles were minor at 500 km

Description: Numerous borehole logging datasets gathered for commercial and scientific purposes are available around the globe. However, studies valorising the chronostratigraphic potential of these datasets through time series analyses remain sparse despite the excellent completeness of downhole logging data retrieved in a fast and high-resolution fashion. The major reason for this is the complexity of such approaches and potential pitfalls that may discourage non-experienced users. Here we provide an overview that summarizes the most relevant properties of borehole logging measurements for time series analysis and cyclostratigraphy. Further, we provide a brief introduction of most relevant time series analyses methods, including several examples of borehole logging cyclostratigraphy. Compared to analyses and interpretations of data from cores or exposures, it is important to be aware of borehole logging data specific pitfalls. These include environmental corrections like the effect of variation in borehole diameter, the effects of drilling fluids, and that presented logs may consist of merged results logged in several depth sections.

Description: Natural alteration of zircon takes place in melts or fluids either via dissolution coupled with overgrowth or via a coupled dissolution-reprecipitation process. The latter results in the zircon being partially or totally replaced by new, compositionally re-equilibrated zircon or a new mineral phase or both. In this study, fragments (50–300 μm) from a large, inclusion-free, clear, 520–530 Ma euhedral zircon with light radiation damage from a nepheline syenite pegmatite, Seiland Igneous Province, northern Norway, were experimentally reacted in 20 mg batches with 5 mg of ThO2 + ThSiO2 + SiO2 and a series of alkali-bearing fluids in sealed Pt capsules at 900 °C and 1000 MPa for 6–11 days in the piston cylinder press using a CaF2 setup with a cylindrical graphite oven. ThO2 + ThSiO2 + SiO2 was present at the end of the experiment. In experiments involving H2O, H2O + NaCl, H2O + KCl, and 2 N KOH, no reaction textures formed other than a slight dissolution of the zircon grain fragments. Experiments involving 2 N NaOH, Na2Si2O5 + H2O, and NaF + H2O resulted in zircon reaction textures with varying degrees of intensity, which took the form of partial replacement by compositionally modified zircon via a coupled dissolution-reprecipitation process. In the NaF + H2O experiment some overgrowth also occurred. Altered zircon is separated by sharp compositional boundaries from unaltered zircon. Secondary ion mass spectrometry (SIMS) and laser ablation inductively coupled plasma mass spectrometry (LA-ICP-MS) analysis indicates that, relative to the unaltered zircon, the altered zircon is strongly enriched in Th, and heavily to moderately depleted in U and (Y + REE). In all the experiments, 206Pb (3–5 ppm in unaltered zircon) is depleted in the altered zircon to below the SIMS detection limit and to at or below the LA-ICP-MS detection limit. Hafnium and Ti concentrations in the altered zircon retained the same approximate value (within error) as the original zircon. The results from these experiments demonstrate that zircon can be compositionally modified by alkali-bearing and alkali-F-bearing fluids via a coupled dissolution-reprecipitation process. Near to total loss of radiogenic Pb via such processes under high-grade conditions resets the internal zircon geochronometer. Although the end result is the same as with zircon overgrowth, i.e. the production of new generation zircon at the time of a metamorphic/metasomatic event, such replacement processes can explain incomplete isotopic ‘resetting’; inclusion production through unmixing of solid solutions in metastable zircon compositions; and ‘ghost’ textures that preserve initial growth features but with isotopic disturbance. Diagnostic replacement features produced in experiments, such as interface geometries between altered and unaltered zircon, provide markers of the mechanism and aid in zircon interpretation. A major implication from this study is that if zircon with low radiation damage can be metasomatically altered under high-grade conditions, this would have important consequences with respect to zircons presumed role as an impregnable container for mineral inclusions. Namely the mineral inclusions contained within zircon could also be altered, reset as a geochronometer, or even replaced by another mineral.

Description: Deeply-sourced fluids are released in volcanically and tectonically active regions through conduits such as fumaroles, natural springs, and permeable soils. The origin and transport of the fluids in volcanic and tectonic systems are a key research theme in Earth Sciences, which is of particular importance for geo-hazard mitigation and resource exploration. This Research Topic aims to present recent advances in fluid geochemistry and its application in volcanically and tectonically active regions. Under this context, 10 papers covering a series of research themes in fluid geochemistry were published in this Research Topic, as briefly summarized below. People living close to active fault zones are threatened by earthquake hazard and therefore monitoring the status of active faults is important to mitigate the damage caused by future earthquakes. Caracausi et al. reported data from a novel infrastructure designed for multidisciplinary and continuous monitoring of the Alto Tiberina fault, Italy. Monitoring results (including seismic, geodetic, and geochemical data) from The Alto Tiberina Near Fault Observatory (TABOO-NFO) would shed new light on earthquake prediction studies in other countries. Fidani et al. conducted a comprehensive statistical analysis of CO2 time series registered at the Gallicano test site, Italy, and identified the correlations between low- magnitude earthquakes and CO2 anomalies in spring waters. Li et al. studied the spatial variations in soil Rn and CO2 emissions in the Wuzhong-Lingwu region, NW China, as well as the possible controlling factors of earthquakes, stress state, and deep-to-shallow crustal structures. Their findings offer new insight into combining geochemical characteristics of soil gas and seismological methods to estimate regional seismic hazards. Under the context of continuous collision between Indian and Asian continents, the Tibetan Plateau and its surrounding regions have drawn increasing concern from the Earth science community because of intensive and frequent earthquake events. Liu et al. reported the first estimates of diffuse soil CO2 flux (~1.2 Mt yr–1) for the Anninghe-Zemuhe fault in the Southeast Tibetan Plateau and found close relationships between spatial variations in soil CO2 fluxes and that of regional seismic activity. Based on the geochemistry of hot spring waters, Liu et al. explored the controls of the Jinshajiang fault zone (SW China) on hydrothermal fluid circulation, water-rock interaction, and earthquakes, which highlighted the role of hot spring water discharging from fracture zones in receiving the hydrological information on seismic activity. Also published in this Research Topic, Liu et al. presented an example of post-earthquake hydrological changes based on carbon isotope data of spring waters collected after the 2021 Mw 7.4 Maduo earthquake in eastern Tibetan Plateau. They quantitatively identified enhanced mobilization of the shallow soil organic carbon following the 2021 Maduo earthquake and suggested that earthquakes could disturb the circulation of subsurface fluids and their interaction with the country rocks and sediments on short timescales. Wang et al. investigated origin and circulation of geothermal waters in the Karakoram strike-slip fault zone in western Tibet. Their results show that geothermal water is correlated with the epicenter and focal depth of earthquakes, especially for high-temperature spring water with deeper circulation and extremely high Li, B, Fe, and As concentrations. Three papers in this Research Topic focus on the degassing of historically active volcanoes. Gherardi et al. investigated helium isotopes on gas extracted by crushing from melt and fluid inclusions in minerals from Plinian and inter-Plinian tephra and lavas of Vesuvius, Italy. Their results show that i) 3He/4He values are buffered within an extended, deep-seated reservoir at about 10 km filled with magma rising from the mantle, and ii) magma ponding at crustal depth could be considered a key mechanism that might have the potential to homogenize the helium isotope signal. Located in the hinterland of Northeast Asia, the active Arxan volcanic field remains less studied for the characteristics of its present-day volcanic degassing. Pan et al. focused on diffuse soil CO2 fluxes and found that annual CO2 emission flux from the volcanic field to the atmosphere is ~0.63 × 105 t and is comparable to that of the Iwojima volcano in Japan. This is the first flux estimate for soil CO2 emissions of the Arxan volcanic field. Cui et al. presented a geochemical study on the hot spring water and gases from the Arxan volcanic field. They identified ~3%–23% mantle helium inputs and thus heat supply in the hydrothermal fluids, suggesting that the residual mantle-derived melts beneath the Arxan volcanic field are still releasing fluids/volatiles and heating the overlying hydrothermal systems.

Description: Published

Description: 1304789

Description: OST5 Verso un nuovo Monitoraggio

Description: JCR Journal

Description: A new pyroclastic stratigraphy is presented for the island of Ischia, Italy, for the period ∼75–50 ka BP. The data indicate that this period bore witness to the largest eruptions recorded on the island and that it was considerably more volcanically active than previously thought. Numerous vents were probably active during this period. The deposits of at least 10 explosive phonolite to basaltictrachyandesite eruptions are described and interpreted. They record a diverse range of explosive volcanic activity including voluminous fountain-fed ignimbrite eruptions, fallout from sustained eruption columns, block-and-ash flows, and phreatomagmatic eruptions. Previously unknown eruptions have been recognised for the first time on the island. Several of the eruptions produced pyroclastic density currents that covered the whole island as well as the neighbouring island of Procida and parts of the mainland. The morphology of Ischia was significantly different to that seen today, with edifices to the south and west and a submerged depression in the centre. The largest volcanic event, the Monte Epomeo Green Tuff (MEGT) resulted in caldera collapse across all or part of the island. It is shown to comprise at least two thick intracaldera ignimbrite flowunits, separated by volcaniclastic sediments that were deposited during a pause in the eruption. Extracaldera deposits of the MEGT include a pumice fall deposit emplaced during the opening phases of the eruption, a widespread lithic lag breccia outcropping across much of Ischia and Procida, and a distal ignimbrite in south-west Campi Flegrei. During this period the style and magnitude of volcanism was dictated by the dynamics of a large differentiated magma chamber, which was partially destroyed during the MEGT eruption. This contrasts with the small-volume Holocene and historical effusive and explosive activity on Ischia, the timing and distribution of which has been controlled by the resurgence of the Monte Epomeo block. The new data contribute to a clearer understanding of the long-term volcanic and magmatic evolution of Ischia.

Description: Published

Description: 583-603

Description: 3.5. Geologia e storia dei sistemi vulcanici

Description: JCR Journal

Description: reserved

Description: The Campanian Volcanic Zone (CVZ) comprises multiple active volcanoes and includes the highly productive Campi Flegrei and Ischia caldera systems. These caldera volcanoes have produced probably the largest eruptions in Europe in the past 200 ka, such as the Monte Epomeo Green Tuff (MEGT; Ischia) at ca. 56 ka and the Campanian Ignimbrite (CI; Campi Flegrei) at ca. 40 ka, which form widespread isochrons across the Mediterranean region. These closely-spaced volcanic centres erupt phonolitic to trachytic glass compositions that are similar, and thus it can be challenging to correlate tephra deposits to specific volcanic sources. Here we present a detailed tephrostratigraphy for pre-CI eruption activity using the units preserved within a sequence at the coastal Acquamorta outcrop, on the western side of the CI caldera rim. Both the MEGT and CI units are present in the section, and they bracket twelve eruption units that were logged and sampled. New major and trace element glass chemistry data have been acquired for these Acquamorta tephra deposits. Three eruption deposits from Ischia and nine from Campi Flegrei are identified, which helps constrain the tempo of volcanic activity of these centres between the large caldera-forming eruptions. The three Ischia tephra deposits between the MEGT and the CI are indistinguishable based on both major and trace element glass chemistry and cannot be correlated to a specific or known eruption in this interval, such as the Schiappone tephra. The compositional variations between the Campi Flegrei eruptions reveal temporal shifts in the composition of the tephra deposits that reflect changes in the magmatic system prior to the CI eruption. These deposits indicate that there were at least nine eruptions at Campi Flegrei within 16 ka of the enormous CI eruption, and suggest that there was no significant period of repose before the caldera generating eruption.

Description: Published

Description: 107915

Description: OSV2: Complessità dei processi vulcanici: approcci multidisciplinari e multiparametrici

Description: JCR Journal

Description: This reprint "The November 23rd, 1980 Irpinia-Lucania, Southern Italy Earthquake: Insights and Reviews 40 Years Later” presents a collection of 13 scientific contributions proposed by 44 researchers with different expertise and multidisciplinary approach highlighting the most important aspects of the Irpinia-Lucania earthquake (Ms 6.9, Io X MCS) from a seismological and geological point of view, without neglecting the reconstruction of cultural heritage, the resilience of the population, and the socioeconomic development of the internal areas of the Southern Apennines after the earthquake. The 1980 earthquake struck Irpinia-Lucania region (Southern Italy) and it is remembered in Italy not only for being the strongest earthquake recorded in the last 100 years causing devastation of entire regions and severe loss of human life, but also for the destruction of the cultural heritage in the epicentral area. This volume, far from being exhaustive, nevertheless wants to be an important point of reference for the new generations of researchers who will have both a historical and multidisciplinary approach to the knowledge of this earthquake.

Description: Published

Description: Active volcanoes are a continuous threat for several regions worldwide and cause socio-economic and environmental issues, including the Virunga Volcanic Province (D.R. Congo). There, more than 2 million people are permanently exposed to the hazards of the most active volcanoes in Africa: Nyiragongo and Nyamulagira. However, there is a clear lack of information regarding the impacts of these hazards and how they may be affected by social vulnerability. In this study, a household survey based on semi-structural interviews was performed for rural communities in Virunga. This research aims to (i) investigate the impacts of volcanic hazards on rural communities facing distinct levels of social vulnerability, (ii) understand the adaptive strategies developed by these communities to address these impacts, and finally (iii) identify the main grievances with respect to volcanic hazards raised by these rural communities. The most vulnerable households are those directly affected by volcano-tectonic hazards such as lava flows, mazukus, volcanic gases, ash fallout, and seismic activity. Indirect dangers related to water and food contamination by volcanic emissions are also stronger for the most vulnerable households. Respondents reported that most edible plants and waters are strongly affected by direct volcanic emissions. Drinking waters, which come from traditional drainage, rainfall, and streams, are generally not suitable for human consumption in the study area. Community suggestions for addressing issues related to volcanic-tectonic hazards include efforts to improve water and food quality, enhancement of the sanitary system, timely information on the volcanic activity, volcano monitoring, and capacity building for volcanologists.

Description: Published

Description: 103566

Description: JCR Journal

Description: Services from the Continuously Operating Reference Stations (CORS) of the Global Navigation Satellite System (GNSS) provide data and insights to a range of research areas such as physical sciences, engineering, earth and planetary sciences, computer science, and environmental science. Even though these fields are varied, they are all linked through the GNSS operational application. GNSS CORS have historically been deployed for three-dimensional positioning but also for the establishment of local and global reference systems and the measurement of ionospheric and tropospheric errors. In addition to these studies, CORS is uncovering new, emerging scientific applications. These include real-time monitoring of land subsidence via network real-time kinematics (NRTK) or precise point positioning (PPP), structural health monitoring (SHM), earthquake and volcanology monitoring, GNSS reflectometry (GNSS-R) for mapping soil moisture content, precision farming with affordable receivers, and zenith total delay to aid hydrology and meteorology. The flexibility of CORS infrastructure and services has paved the way for new research areas. The aim of this study is to present a curated selection of scientific papers on prevalent topics such as network monitoring, reference frames, and structure monitoring (like dams), along with an evaluation of CORS performance. Concurrently, it reports on the scientific endeavours undertaken by the Geomatics Research Group at the University of Palermo in the realm of GNSS CORS over the past 15 years.

Description: Published

Description: 5343

Description: JCR Journal

Description: Campi Flegrei (CF) is an active and densely populated caldera in Southern Italy, which has manifested signs of significant unrest in the last 50 years. Due to the high volcanic risk, monitoring networks of the most sensitive unrest indicators have been implemented and improved over time. Precious database constituted by geophysical and geochemical data allowed the study of the caldera unrest phases. In this paper we retrace the caldera history in the time span 2000-2020 by analyzing displacement, seismicity and geochemical time series in a unified framework. To this end, Principal Component Analysis (PCA) was firstly applied only on geochemical data because of their compositional nature. The retrieved first three components were successively analyzed via PCA together with the geophysical and thermodynamical variables. Our results suggest that three independent processes relay on geochemical observations: a heating/pressurizing of the hydrothermal system, a process related to magmatic fluids injection at the hydrothermal system roots, and third process probably connected with a deeper magmatic dynamic. The actual volcano alert state seems mainly linked to the variation of the hydrothermal system activity. Our approach made it possible to explore the interrelation among observations of different nature highlighting the importance of the relative driving processes over time.

Description: Published

Description: 18445

Description: JCR Journal

Description: On December 26, 2018 (2:19 UTC), during a volcanic eruption on the Mt. Etna eastern flank (Sicily, southern Italy), the largest instrumental earthquake ever recorded in the volcano ruptured the Fiandaca Fault, with epicenter between Fleri and Pennisi villages (hypocenter at ca. 300 m a. s. l., Mw 4.9). This was the mainshock of an earthquake swarm and it was accompanied by widespread surface faulting and extensive damage along a narrow belt near the fault trace. Few hours after the mainshock, an episodic aseismic creep event occurred along the Aci Platani Fault, a SE extension of the Fiandaca Fault, which caused several damages in the Aci Platani village. We surveyed and mapped the coseismic and aseismic ground ruptures, and collected structural data on their geometry, displacement, and fault zone fabric. We compared the mapped surface ruptures with topography, lithology, and morphology of the buried top of the sedimentary basement. We conclude that the geometry of the volcanic pile influenced the surface expression of faulting during the December 26, 2018 event. The top surface of the marly clay basement should be considered as a detachment surface for shallow sliding blocks. The earthquake occurred on top of a depression of the sedimentary basement forcing the sliding eastward, causing at surface the re-arrangement of the fault strand pattern and deformation style, switching from shear faulting to a tensile failure. The Fleri earthquake therefore provides an unprecedented dataset for 1) understanding active faulting in the European largest onshore volcano, 2) modeling its complex dynamics, and 3) contributing to a more refined surface faulting hazard assessment at Mt. Etna. Results from this investigation might be useful for characterizing capable faulting in similar volcano-tectonic settings worldwide.

Description: Published

Description: 25-41

Description: JCR Journal

Description: A taxonomic revision of the genus Scleria (Cyperoideae, Cyperaceae) in Madagascar is presented. Herbarium specimens have been examined and 422 identified to species level. Our results recognise 25 species of Scleria from Madagascar, plus an additional heterotypic variety. Eight species are endemic to Madagascar, two are near endemic, eight taxa are also found on mainland Africa, and eight are widespread tropical taxa. Scleria achtenii is reported from Madagascar for the first time, and S. rosea is accepted at species level instead of being considered as a synonym of S. trialata. Distribution maps, conservation assessments, and notes on synonymy, ecology and ethnobotany are provided. Fourty-seven names are typified. Three rare endemic species: S. andringitrensis, S. madagascariensis and S. perpusilla, are assessed as threatened; and a recently described species, S. ankaratrensis, is indicated as Data Deficient. The most species-rich infrageneric taxa, sections Hypoporum, Abortivae and Foveolidia include 18 taxa in total, and showed strong differences in habitat preference.

Description: As part of the second phase of the Regional Carbon Cycle Assessment and Processes project (RECCAP2), we present an assessment of the carbon cycle of the Atlantic Ocean, including the Mediterranean Sea, between 1985 and 2018 using global ocean biogeochemical models (GOBMs) and estimates based on surface ocean carbon dioxide (CO2) partial pressure (pCO2 products) and ocean interior dissolved inorganic carbon observations. Estimates of the basin-wide long-term mean net annual CO2 uptake based on GOBMs and pCO2 products are in reasonable agreement (−0.47 ± 0.15 PgC yr−1 and −0.36 ± 0.06 PgC yr−1, respectively), with the higher uptake in the GOBM-based estimates likely being a consequence of a deficit in the representation of natural outgassing of land derived carbon. In the GOBMs, the CO2 uptake increases with time at rates close to what one would expect from the atmospheric CO2 increase, but pCO2 products estimate a rate twice as fast. The largest disagreement in the CO2 flux between GOBMs and pCO2 products is found north of 50°N, coinciding with the largest disagreement in the seasonal cycle and interannual variability. The mean accumulation rate of anthropogenic CO2 (Cant) over 1994–2007 in the Atlantic Ocean is 0.52 ± 0.11 PgC yr−1 according to the GOBMs, 28% ± 20% lower than that derived from observations. Around 70% of this Cant is taken up from the atmosphere, while the remainder is imported from the Southern Ocean through lateral transport.