ISSN:
0961-5539
Source:
Emerald Fulltext Archive Database 1994-2005
Topics:
Mechanical Engineering, Materials Science, Production Engineering, Mining and Metallurgy, Traffic Engineering, Precision Mechanics
Notes:
The solidification of a superheated fluid-porous medium contained in a rectangular cavity is studied numerically. The bottom and side walls of the cavity are insulated while the top wall is maintained at a constant temperature below the freezing point of the saturating fluid. The study is focused on the effects of superheat on the development of natural convection and heat transfer during the solidification process. For a fluid initially at a temperature above the freezing point, the results obtained by neglecting convection overpredicts the solidification time by about 12 percent for a Rayleigh number of 800. When convection is taken into account, it is found that the solidification process consists of three distinct regimes: the conduction regime, convection regime and the solidification of the remaining fluid that can be described by the Neumann solution for the solidification of a fluid at its freezing point. The numerical simulations are based on the Darcy-Boussinesq equations, using the front tracking method in a transformed coordinate system. The entire solidification process is described in terms of the evolutions of the streamlines and isotherm patterns, the maximum and average temperatures of the fluid, the interface position, and the heat transfer rate. The parametric domain covered by these simulations is 0 = Ra = 800, 0 = Stl = 0.67, Sts = 0.3 and XL = 1 where Ra is the Rayleigh number, Stl the liquid Stefan number, Sts the solid Stefan number, and XL the aspect ratio of the cavity.
Type of Medium:
Electronic Resource
URL:
http://dx.doi.org/10.1108/09615539910251112
Permalink