ALBERT

All Library Books, journals and Electronic Records Telegrafenberg

feed icon rss

Your email was sent successfully. Check your inbox.

An error occurred while sending the email. Please try again.

Proceed reservation?

Export
Filter
Collection
  • 1
    Publication Date: 2024-04-20
    Description: Observational fabric (c-axis distribution) data was retrieved from a shallow firn core on the southeast shear margin of NEGIS called S5. The preparation and measurement of the samples follow the principles as described by Weikusat rt al. (2017). All analysed samples are vertical to the ice core axis and have dimensions of about 90 x 70 x 0.3 mm. The sample surfaces were carefully polished with a microtome in the EGRIP trench at -18 °C. After one hour of controlled sublimation, c-axes were measured with an automated fabric analyser by Russel-Head Instruments (FA G50). The data was background corrected before processing, and the Crystal preferred orientation CPO was derived via digital image processing. We here show data of three S5 shallow core samples from a depth of 68 m.
    Keywords: c-axes; DEPTH, ice/snow; East Greenland Ice-core Project; EGRIP; EGRIP_S5; Greenland; IC; Ice corer; Image; S5; shallow ice core; shear margin; Text file
    Type: Dataset
    Format: text/tab-separated-values, 6 data points
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 2
    Publication Date: 2020-07-08
    Description: Drilling an ice core through an ice sheet (typically 2000 to 3000 m thick) is a technical challenge that nonetheless generates valuable and unique information on palaeo-climate and ice dynamics. As technically the drilling cannot be done in one run, the core has to be fractured approximately every 3 m to retrieve core sections from the bore hole. This fracture process is initiated by breaking the core with core-catchers which also clamp the engaged core in the drill head while the whole drill is then pulled up with the winch motor. This standard procedure is known to become difficult and requires extremely high pulling forces (Wilhelms et al. 2007), in the very deep part of the drill procedure, close to the bedrock of the ice sheet, especially when the ice material becomes warm (approximately -2°C) due to the geothermal heat released from the bedrock. Recently, during the EastGRIP (East Greenland Ice coring Project) drilling we observed a similar issue with breaking off cored sections only with extremely high pulling forces, but started from approximately 1800 m of depth, where the temperature is still very cold (approximately -20°C). This has not been observed at other ice drilling sites. As dependencies of fracture behaviour on crystal orientation and grain size are known (Schulson & Duval 2009) for ice, we thus examined the microstructure in the ice samples close to and at the core breaks. First preliminary results suggest that these so far unexperienced difficulties are due to the profoundly different c-axes orientation distribution (CPO) in the EastGRIP ice core. In contrast to other deep ice cores which have been drilled on ice domes or ice divides, EastGRIP is located in an ice stream. This location means that the deformation geometry (kinematics) is completely different, resulting in a different CPO (girdle pattern instead of single maximum pattern). Evidence regarding additional grain-size dependence will hopefully help to refine the fracturing procedure, which is possible due to a rather strong grain size layering observed in natural ice formed by snow precipitation. --------------------- Wilhelms, F.; Sheldon, S. G.; Hamann, I. & Kipfstuhl, S. Implications for and findings from deep ice core drillings - An example: The ultimate tensile strength of ice at high strain rates. Physics and Chemistry of Ice (The proceedings of the International Conference on the Physics and Chemistry of Ice held at Bremerhaven, Germany on 23-28 July 2006), 2007, 635-639 Schulson, E. M. & Duval, P. Creep and Fracture of Ice. Cambridge University Press, 2009, 401
    Repository Name: EPIC Alfred Wegener Institut
    Type: Conference , notRev
    Format: application/pdf
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 3
    Publication Date: 2020-05-11
    Description: Here we present the ice microstructure and CPO (c-axes fabric) data from the upper 2121 m of the EastGRIP ice core, an on-going deep drilling project on the North East Greenland Ice Stream. Understanding ice flow behaviour of fast flowing ice streams is crucial for accurate projections of future global sea level rise, but is still poorly understood due to e.g. missing observational fabric data from ice streams. The presented CPO patterns found at EastGRIP show (1) a rapid evolution of c-axes anisotropy compared to deep ice cores from less dynamic sites, (2) a CPO evolution towards a strong vertical girdle and (3) CPO patterns that have not previously been directly observed in ice. Furthermore, data regarding grain properties (e.g. grain size) and indications of dynamic recrystallization, already at shallow depths, are presented. The ice CPO shows a clear evolution with depth. In the first measurements at 111 m depth a broad single maximum distribution is observed, which transforms into a crossed girdle CPO (196-294 m). With increasing depth, an evolution towards a vertical girdle c-axes distribution occurs. Below 1150 m the CPO evolves into a vertical girdle with a higher density of c-axes oriented horizontally, a novel CPO in ice. These CPO patterns indicate a depth-related change in deformation modes, from vertical compression to extensional deformation along flow. Grain size values are similar to results from other Greenlandic deep ice cores. Grain size evolution is characterized by an increase until 500 m depth, a decrease until 1360 m depth and mainly constant values in the Glacial. These findings are accompanied by indications of an early onset of dynamic recrystallisation e.g. irregular grain shapes, protruding grains and island grains. The presented high-resolution data enable, for the very first time, a detailed and data- based look into a fast-flowing ice stream and are an important step towards a better understanding of the rheology of ice and its flow behaviour.
    Repository Name: EPIC Alfred Wegener Institut
    Type: Conference , notRev
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 4
    Publication Date: 2023-02-21
    Description: Author Posting. © American Geophysical Union, 2022. This article is posted here by permission of American Geophysical Union for personal use, not for redistribution. The definitive version was published in Journal of Geophysical Research: Solid Earth 127(8), (2022): e2022JB024497, https://doi.org/10.1029/2022JB024497.
    Description: During plastic deformation, strain weakening can be achieved, in part, via strain energy reduction associated with intragranular boundary development and grain boundary formation. Grain boundaries (in 2D) are segments between triple junctions, that connect to encircle grains; every boundary segment in the encircling loop has a high (〉10°) misorientation angle. Intragranular boundaries terminate within grains or dissect grains, usually containing boundary segments with a low (〈10°) misorientation angle. We analyze electron backscatter diffraction (EBSD) data from ice deformed at −30°C (Th≈ 0.9). Misorientation and weighted Burgers vector (WBV) statistics are calculated along planar intragranular boundaries. Misorientation angles change markedly along each intragranular boundary, linking low- (〈10°) and high-angle (10–38°) segments that exhibit distinct misorientation axes and WBV directions. We suggest that these boundaries might be produced by the growth and intersection of individual intragranular boundary segments comprising dislocations with distinct slip systems. There is a fundamental difference between misorientation axis distributions of intragranular boundaries (misorientation axes mostly confined to ice basal plane) and grain boundaries (no preferred misorientation axis). These observations suggest during progressive subgrain rotation, intragranular boundaries remain crystallographically controlled up to large misorientation angles (〉〉10°). In contrast, the apparent lack of crystallographic control for grain boundaries suggests misorientation axes become randomized, likely due to the activation of additional mechanisms (such as grain boundary sliding) after grain boundary formation, linking boundary segments to encircle a grain. Our findings on ice intragranular boundary development and grain boundary formation may apply more broadly to other rock-forming minerals (e.g., olivine, quartz).
    Description: This work was supported by a NASA fund (Grant No. NNX15AM69G) to David L. Goldsby and two Marsden Funds of the Royal Society of New Zealand (Grant Nos. UOO1116, UOO052) to David J. Prior. Sheng Fan was supported by the University of Otago doctoral scholarship, the Antarctica New Zealand doctoral scholarship, a research grant from New Zealand Ministry of Business, Innovation and Employment through the Antarctic Science Platform (ANTA1801) (Grant No. ASP-023-03), and a New Zealand Antarctic Research Institute (NZARI) Early Career Researcher Seed Grant (Grant No. NZARI 2020-1-5). Open access publishing facilitated by University of Otago, as part of the Wiley – University of Otago agreement via the Council of Australian University Librarians.
    Keywords: High temperature deformation ; Misorientation ; Weighted Burgers vector ; Intragranular boundary ; Grain boundary ; Boundary geometry
    Repository Name: Woods Hole Open Access Server
    Type: Article
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 5
    Electronic Resource
    Electronic Resource
    Westerville, Ohio : American Ceramics Society
    Journal of the American Ceramic Society 80 (1997), S. 0 
    ISSN: 1551-2916
    Source: Blackwell Publishing Journal Backfiles 1879-2005
    Topics: Mechanical Engineering, Materials Science, Production Engineering, Mining and Metallurgy, Traffic Engineering, Precision Mechanics , Physics
    Notes: Critical to a fundamental understanding of the structureproperty relationships in ceramics is the ability to address the key issues of like-ion repulsion, partial occupancy, and composition at defect cores. Here, multiple scattering theory is used to produce a symmetry-projected, site-specific, density of states for defect structures observed experimentally in a SrTiO3 high-angle tilt grain boundary. The real space atomic clusters used in multiple scattering calculations do not rely heavily on symmetry, thus permitting the structural origins of particular features to be readily identified in low-symmetry systems. Results are compared directly with experimental electron energy loss spectra and give strong evidence for partial occupied columns of atoms at specific interface cores and the persistence of bulklike atomic correlations at the grain boundary.
    Type of Medium: Electronic Resource
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 6
    Electronic Resource
    Electronic Resource
    Springer
    Journal of industrial microbiology and biotechnology 2 (1987), S. 277-283 
    ISSN: 1476-5535
    Keywords: Bacillus sphaericus ; Microbial insecticide ; Mosquito ; Mosquito toxin ; Continuous culture
    Source: Springer Online Journal Archives 1860-2000
    Topics: Biology , Process Engineering, Biotechnology, Nutrition Technology
    Notes: Summary Batch and continuous culture were used to investigate the production ofBacillus sphaericus mosquito larvicide. In batch culture, control of the pH at 7.2–7.3 rather than allowing the normal rise to about 8.6 decreased the toxicity of the cells. Oxygen was required for toxin formation but increasing the level of dissolved oxygen in the medium by use of pure oxygen in the gas stream lowered toxin production. Sporulation and toxin production occurred in continuous culture and were greater at lower dilution rates. However, toxin yield in continuous culture was too low to be a likely alternative to batch culture.
    Type of Medium: Electronic Resource
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 7
    ISSN: 1432-0991
    Source: Springer Online Journal Archives 1860-2000
    Topics: Biology , Medicine
    Notes: Abstract The effect of oxygen on growth, sporulation, and mosquito larval toxin synthesis byBacillus sphaericus 1593 grown in a small fermentor was investigated. With air as the source of oxygen, about one-half of the cells sporulated and 1022 units of toxicity/mg of cell dry weight were formed. A shift to 100% oxygen in the gas stream maintained a higher level of dissolved oxygen in the medium, but this produced a late block in sporulation; however, toxin synthesis was normal. The mechanism of oxygen inhibition of sporulation byB. sphaericus is unknown, but the same effect was observed inB. subtilis 168. Stopping of the air flow at 8 h, after forespores were completed in about one-half the cells, inhibited the completion of sporulation, but did not decrease toxin production.
    Type of Medium: Electronic Resource
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 8
    Electronic Resource
    Electronic Resource
    New York, NY [u.a.] : Wiley-Blackwell
    Biotechnology and Bioengineering 26 (1984), S. 468-476 
    ISSN: 0006-3592
    Keywords: Chemistry ; Biochemistry and Biotechnology
    Source: Wiley InterScience Backfile Collection 1832-2000
    Topics: Biology , Process Engineering, Biotechnology, Nutrition Technology
    Notes: The dynamic analysis of a continuous, aerobic, fixed-film bioreactor has been performed. Rigorous mathematical models have been developed for a fluidized-bed fermentor with biofilm growth. The transient performance of the reactor is appraised in terms of outlet penicillin concentration for constant, as well as variable carbon substrate feed rates. The effect of the reactor oxygen transfer capacity is elucidated for those cases employing substrate feeding strategies. The results show that penicillin production in a continuous, fixed-film bioreactor reaches a maximum with processing time, but subsequently decreases as cell mass accumulates and substrate deficiencies occur. The maximum production level can be maintained for increased operating times if the substrate supply is continuously increased. The duration of this prolonged production is a direct function of the rate of increase and the operating time at which the increase is initiated. The oxygen transfer capacity of the reactor was found to be important to the effectiveness of a feeding strategy.
    Additional Material: 7 Ill.
    Type of Medium: Electronic Resource
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 9
    Electronic Resource
    Electronic Resource
    New York, NY [u.a.] : Wiley-Blackwell
    Biotechnology and Bioengineering 26 (1984), S. 457-467 
    ISSN: 0006-3592
    Keywords: Chemistry ; Biochemistry and Biotechnology
    Source: Wiley InterScience Backfile Collection 1832-2000
    Topics: Biology , Process Engineering, Biotechnology, Nutrition Technology
    Notes: The analysis of a continuous, aerobic, fixed-film bioreactor is performed by simulating the behavior of penicillin production in a three-phase fluidized bed. Rigorous mathematical models are developed for a fluidized-bed fermentor in which bioparticles are fluidized by the liquid medium and air. The steady-state performance of the fluidized-bed reactor is appraised in terms of penicillin productivity and outlet concentration by considering the two extremes in contacting patterns, complete back-mix and plug flow, in the absence of a growing biofilm. The results show that the complete back-mix contacting pattern is preferred over that of plug flow due to the nature of the penicillin kinetic relationships. It is also shown that for the dual-nutrient (glucose and oxygen) penicillin reaction system the optimum biofilm thickness does not equal the penetration depth of a limiting nutrient, but depends upon the total reactor configuration.
    Additional Material: 12 Ill.
    Type of Medium: Electronic Resource
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 10
    Publication Date: 2021-08-17
    Description: Abstract
    Description: This dataset is supplemental to the paper Wallis et al. (2020) and contains data derived from syn-chrotron X-ray diffraction, electron backscatter diffraction (EBSD), high-angular resolution electron backscatter diffraction (HR-EBSD), and scanning transmission electron microscopy (STEM). The da-taset consists primarily of measurements of the effect of annealing on stress heterogeneity meas-ured by X-ray diffraction; maps of lattice orientation measured by EBSD; maps of lattice rotations, densities of geometrically necessary dislocations (GNDs), and heterogeneity in residual stress measured by HR-EBSD; and images of dislocations obtained by STEM. Data are provided as 66 tab delimited text files organised and labelled by the figure in which they first appear within Wallis et al. (2020). Table 1 of the data description file presents an overview of the datasets and Table 2 provides a description of each data file. Data types are also indicated in the file names.
    Keywords: Low-temperature plasticity ; olivine ; synchrotron X-ray diffraction ; electron backscatter diffraction ; EBSD ; high-angular resolution electron backscatter diffraction ; HR-EBSD ; scanning transmission electron microscopy ; STEM ; geometrically necessary dislocation ; GND ; residual stress ; EPOS ; multi-scale laboratories ; rock and melt physical properties ; EARTH SCIENCE 〉 SOLID EARTH 〉 ROCKS/MINERALS/CRYSTALS 〉 IGNEOUS ROCKS 〉 IGNEOUS ROCK PHYSICAL/OPTICAL PROPERTIES 〉 HARDNESS ; EARTH SCIENCE 〉 SOLID EARTH 〉 ROCKS/MINERALS/CRYSTALS 〉 MINERALS 〉 MINERAL PHYSICAL/OPTICAL PROPERTIES 〉 COMPOSITION/TEXTURE ; EARTH SCIENCE 〉 SOLID EARTH 〉 ROCKS/MINERALS/CRYSTALS 〉 MINERALS 〉 MINERAL PHYSICAL/OPTICAL PROPERTIES 〉 HARDNESS ; EARTH SCIENCE 〉 SOLID EARTH 〉 TECTONICS 〉 PLATE TECTONICS 〉 STRAIN ; EARTH SCIENCE 〉 SOLID EARTH 〉 TECTONICS 〉 PLATE TECTONICS 〉 STRESS ; Hardness ; Multi Anvil ; olivine ; Strength 〉 Yield Strength ; Triaxial
    Type: Dataset , Dataset
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
Close ⊗
This website uses cookies and the analysis tool Matomo. More information can be found here...