ISSN:
1573-9066
Source:
Springer Online Journal Archives 1860-2000
Topics:
Mechanical Engineering, Materials Science, Production Engineering, Mining and Metallurgy, Traffic Engineering, Precision Mechanics
Notes:
Conclusions A study was made of the possibility of preparing copper powder by the method of reduction by titanium compounds in aqueous solutions, and it was established that, as a result of the reaction of titanium sulfate Ti2(SO4)3 with copper sulfate CuSO4 in a solution with an addition of 200–250 g/dm3 I2SO4, a very fine, pure copper powder with rounded particles is produced. Two methods of preparing copper powder were developed: one employing the gradual addition (drop by drop) of a saturated CuSO4 solution to a Ti2(SO4)3 solution (periodic method) and another employing the anodic dissolution of metallic copper in a Ti2(SO4)3 solution (continuous method). In both cases, the process is carried out with the simultaneous electrochemical reduction Ti4++e→Ti3+ on a lead or copper cathode. The periodic method is more suitable for the preparation of powders of extra-high purity, because it is easier to remove impurities from salts than from metals. The advantages of the continuous method comprise the possibility of utilizing various forms of copper scrap as anodes, absence of losses of titanium and copper salts, and possibility of performing the process automatically. The following have been developed: a procedure for the treatment and drying of powder, and methods of determining powder size and the degree of purity of the product. It is shown that, for determining the degree of oxidation of copper powder, it is possible to use a visual method of comparing the color of the product with that of specially prepared reference specimens.
Type of Medium:
Electronic Resource
URL:
http://dx.doi.org/10.1007/BF00774271
Permalink
