ISSN:
1432-1114
Source:
Springer Online Journal Archives 1860-2000
Topics:
Mechanical Engineering, Materials Science, Production Engineering, Mining and Metallurgy, Traffic Engineering, Precision Mechanics
Notes:
Abstract A four-hole pyramid probe has been calibrated for use in a short-duration transonic turbine cascade tunnel. The probe is used to create area traverse maps of total and static pressure, and pitch and yaw angles of the flow downstream of a transonic annular cascade. This data is unusual in that it was acquired in a short-duration (5 s of run time) annular cascade blowdown tunnel. A four-hole pyramid probe was used which has a 2.5 mm section head, and has the side faces inclined at 60° to the flow to improve transonic performance. The probe was calibrated in an ejector driven, perforated wall transonic tunnel over the Mach number range 0.5–1.2, with pitch angles from -20° to + 20° and yaw angles from-23° to +23°. A computer driven automatic traversing mechanism and data collection system was used to acquire a large probe calibration matrix (∼ 10,000 readings) of non dimensional pitch, yaw, Mach number, and total pressure calibration coefficients. A novel method was used to transform the probe calibration matrix of the raw coefficients into a probe application matrix of the physical flow variables (pitch, yaw, Mach number etc.). The probe application matrix is then used as a fast look-up table to process probe results. With negligible loss of accuracy, this method is faster by two orders of magnitude than the alternative of global interpolation on the raw probe calibration matrix. The blowdown tunnel (mean nozzle guide vane blade ring diameter 1.1 m) creates engine representative Reynolds numbers, transonic Mach numbers and high levels (≈ 13%) of inlet turbulence intensity. Contours of experimental measurements at three different engine relevant conditions and two axial positions have been obtained. An analysis of the data is presented which includes a necessary correction for the finite velocity of the probe. Such a correction is non trivial for the case of fast moving probes in compressible flow.
Type of Medium:
Electronic Resource
URL:
http://dx.doi.org/10.1007/BF00190681
Permalink
