ALBERT

Description: The Ægir Ridge System (ARS) is an ancient extinct spreading axis in the Nordic seas extending from the upper slope east of Iceland (∼550 m depth), as part of its Exclusive Economic Zone (EEZ), to a depth of ∼3,800 m in the Norwegian basin. Geomorphologically a rift valley, the ARS has a canyon-like structure that may promote increased diversity and faunal density. The main objective of this study was to characterize benthic habitats and related macro- and megabenthic communities along the ARS, and the influence of water mass variables and depth on them. During the IceAGE3 expedition (Icelandic marine Animals: Genetics and Ecology) on RV Sonne in June 2020, benthic communities of the ARS were surveyed by means of a remotely-operated vehicle (ROV) and epibenthic sledge (EBS). For this purpose, two working areas were selected, including abyssal stations in the northeast and bathyal stations in the southwest of the ARS. Video and still images of the seabed were usedtoqualitatively describebenthic habitats based on the presence of habitat-forming taxa and the physical environment. Patterns of diversity and community composition of the soft-sediment macrofauna, retrieved from the EBS, were analyzed in a semiquantitative manner. These biological data were complemented by producing high-resolution bathymetric maps using the vessel’s multi-beam echosounder system. As suspected, we were able to identify differences in species composition and number of macro- and megafaunal communities associated with a depth gradient. A biological canyon effect became evident in dense aggregates of megafaunal filter feeders and elevated macrofaunal densities. Analysis of videos and still images from the ROV transects also led to the discovery of a number ofVulnerable Marine Ecosystems (VMEs) dominated by sponges and soft corals characteristic of the Arctic region. Directions for future research encompass a more detailed, quantitative study of the megafauna and more coherent sampling over the entire depth range in order to fully capture the diversity of the habitats and biota of the region. The presence of sensitive biogenic habitats, alongside seemingly high biodiversity and naturalness are supportive of ongoing considerations of designating part of the ARS as an “Ecologically and Biologically Significant Area” (EBSA).

Description: Understanding the dynamics and fate of methane (CH 4 ) release from oceanic seepages on margins and shelves into the water column, and quantifying the budget of its total discharge at different spatial and temporal scales, currently represents a major scientific undertaking. Previous works on the fate of methane escaping from the seafloor underlined the challenge in both, estimating its concentration distribution and identifying gradients. In April 2019, the Envri Methane Cruise has been conducted onboard the R/V Mare Nigrum in the Western Black Sea to investigate two shallow methane seep sites at ∼120 m and ∼55 m water depth. Dissolved CH 4 measurements were conducted with two continuous in-situ sensors: a membrane inlet laser spectrometer (MILS) and a commercial methane sensor (METS) from Franatech GmbH. Additionally, discrete water samples were collected from CTD-Rosette deployment and standard laboratory methane analysis was performed by gas chromatography coupled with either purge-and-trap or headspace techniques. The resulting vertical profiles (from both in situ and discrete water sample measurements) of dissolved methane concentration follow an expected exponential dissolution function at both sites. At the deeper site, high dissolved methane concentrations are detected up to ∼45 m from the seabed, while at the sea surface dissolved methane was in equilibrium with the atmospheric concentration. At the shallower site, sea surface CH 4 concentrations were four times higher than the expected equilibrium value. Our results seem to support that methane may be transferred from the sea to the atmosphere, depending on local water depths. In accordance with previous studies, the shallower the water, the more likely is a sea-to-atmosphere transport of methane. High spatial resolution surface data also support this hypothesis. Well localized methane enriched waters were found near the surface at both sites, but their locations appear to be decoupled with the ones of the seafloor seepages. This highlights the need of better understanding the processes responsible for the transport and transformation of the dissolved methane in the water column, especially in stratified water masses like in the Black Sea.

Description: Landscape maps based on multivariate cluster analyses provide an objective and comprehensive view on the (marine) environment. They can hence support decision making regarding sustainable ocean resource handling and protection schemes. Across a large number of scales, input parameters and classification methods, numerous studies categorize the ocean into seascapes, hydro-morphological provinces or clusters. Many of them are regional, however, while only a few are on a basin scale. This study presents an automated cluster analysis of the entire Atlantic seafloor environment, based on eight global datasets and their derivatives: Bathymetry, slope, terrain ruggedness index, topographic position index, sediment thickness, POC flux, salinity, dissolved oxygen, temperature, current velocity, and phytoplankton abundance in surface waters along with seasonal variabilities. As a result, we obtained nine seabed areas (SBAs) that portray the Atlantic seafloor. Some SBAs have a clear geological and geomorphological nature, while others are defined by a mixture of terrain and water body characteristics. The majority of the SBAs, especially those covering the deep ocean areas, are coherent and show little seasonal and hydrographic variation, whereas other, nearshore SBAs, are smaller sized and dominated by high seasonal changes. To demonstrate the potential use of the marine landscape map for marine spatial planning purposes, we mapped out local SBA diversity using the patch richness index developed in landscape ecology. It identifies areas of high landscape diversity, and is a practical way of defining potential areas of interest, e.g. for designation as protected areas, or for further research. Clustering probabilities are highest (100%) in the center of SBA patches and decrease towards the edges (〈 98%). On the SBA point cloud which was reduced for probabilities 〈98%, we ran a diversity analysis to identify and highlight regions that have a high number of different SBAs per area, indicating the use of such analyses to automatically find potentially delicate areas. We found that some of the highlights are already within existing EBSAs, but the majority is yet unexplored.

Description: These raw single beam data were recorded with a Simrad EK80 with ES70 transducer. They contain water column data in which gas bubbles streams are visible.

Description: During a cruise within the ENVRI+ Project WP4, a joint pilot experiment to measure methane transfer from the seafloor to the atmosphere, bathymetry was recorded using a hull-mountes Elac Seabeam 1050 multibeam system. The data contain a 10m grid file as well as ungridded .xyz.

Description: This data set presents the results of an automated cluster analysis using Gaussian mixture models of the entire Atlantic seafloor environment. The analysis was based on eight global datasets and their derivatives: Bathymetry, slope, terrain ruggedness index, topographic position index, sediment thickness, POC flux, salinity, dissolved oxygen, temperature, current velocity, and phytoplankton abundance in surface waters along with seasonal variabilities (see Source data set). We obtained nine seabed areas (SBAs) that portray the Atlantic seafloor that are shown as polygons in the data set. The attribute table holds short descriptions of each SBA as well as about the colours used in the accompanying paper publication. Data sets like this can be used for further analysis like e.g. for landscape ecology metrics to identify regions of interest. The compressed file further contains a style file that can be used to directly load the correct style in the QGIS software package.

Description: Multibeam bathymetry raw data was recorded in the North Atlantic during cruise SO276 MerMet 17-6 that took place between 2020-06-22 and 2020-07-26. The data was collected using the ship's own Kongsberg EM 122. Sound velocity profiles (SVP) were applied on the data for calibration. Please see environmental data (zip file) and the cruise report for details. The bathymetric data acquisition was carried out within the IceAge project which aims to investigate the North Atlantic ecosystem. Working areas have been selected to offer a variability of environments (e.g., variability of water depth, and geological setting (shelf, mid-ocean ridge, deep basin)). The bathymetric data were used to plan ROV dives and sampling stations as well as background for habitat mapping studies.

Description: Raw multibeam bathymetry data were recorded on RV SONNE during SO276 using Kongsberg EM710 multibeam echosounder. The cruise took place between 2020-06-22 - 2020-07-26 in the Atlantic Ocean. Data were recorded throughout the whole time spend outside EEZs in areas shallower than 1500m with an approximate average depth of around 400m. To enhance MBES data accuracy, CTD casts were made in the working area prior to each MBES survey using CTD rosette to raytrace beams with the obtained sound velocity profiles (SVP). During transits, SVPs from the WOA13 were applied via Sound Speed Manager Software to the data directly during acquisition with SIS Seafloor Information System. Data are unprocessed and can therefore contain incorrect depth measurements (artifacts) without further processing. The data are archived at the Federal Maritime and Hydrographic Agency of Germany (Bundesamt für Seeschifffahrt und Hydrographie, BSH) and provided to PANGAEA database for data curation and publication. Ancillary sound velocity profiles (SVP) files from the cruise are archived at the BSH, thus SVP files are added to this dataset. Data acquisition and provision were accomplished within work package 2 of the EU Horizon 2020 project iAtlantic- Integrated Assessment of Atlantic Marine Ecosystem in Space and Time (https://www.iatlantic.eu/) IceAge project.

Description: This dataset includes 11 regional EUNIS-classified habitat maps (100-1000 km) and associated confidence maps that were created as a project milestone (Nr. 12) of the EU H2020 project 'iAtlantic'. The 12 iAtlantic regions encompass 1. Subpolar Mid-Atlantic Ridge, off Iceland MFRI, 2. Rockall Trough to PAP, 3. Central mid-Atlantic Ridge, 4. NW Atlantic, Gully Canyon, 5. Sargasso Sea, 6. Eastern Tropical North Atlantic, Cape Verde, 7. Equatorial Atlantic, Romanche Fracture Zone, 8. Slope & margin off Angola & Congo Lobe, 9. Benguela Current, Walvis Ridge to South Africa, 10. Brazil margin & Santos and Campos Basin, 11. Vitória-Trindade Seamount Chain and 12. Malvinas Current. For each of the regions 2-12, a shapefile of polygons classified according to the 2022 EUNIS classification level 3 and a second shapefile of the same polygons attributed with their confidence level according to the MESH Accuracy & Confidence Working approach was created. EUNIS classifications combined biozone and substrate data. Biozones were assigned from bathymetry. Where MBES was not available, GEBCO bathymetry was used. Substrate data were extracted from pre-existing geological/substrate mapping efforts and converted to EUNIS classifications via cross walks or, where substrate data were limited, substrate layers were modelled using Random Forest. The EUNIS habitat map for Region 4 was based on the pre-existing surficial geology compilation of the Scotian Shelf bioregion compiled by the Geological Survey of Canada. The EUNIS habitat map for Region 9 was based on the pre-existing South African habitat map that uses a modified IUCN hierarchical classification system. No additional information to that used in the EUSeaMap was available for Region 1. Therefore, shapefiles were not created for Region 1.