ALBERT

Description: The Community Climate System Model version 3 (CCSM3) has recently been developed and released to the climate community. CCSM3 is a coupled climate model with components representing the atmosphere, ocean, sea ice, and land surface connected by a flux coupler. CCSM3 is designed to produce realistic simulations over a wide range of spatial resolutions, enabling inexpensive simulations lasting several millennia or detailed studies of continental-scale dynamics, variability, and climate change. This paper will show results from the configuration used for climate-change simulations with a T85 grid for the atmosphere and land and a grid with approximately 1° resolution for the ocean and sea ice. The new system incorporates several significant improvements in the physical parameterizations. The enhancements in the model physics are designed to reduce or eliminate several systematic biases in the mean climate produced by previous editions of CCSM. These include new treatments of cloud processes, aerosol radiative forcing, land–atmosphere fluxes, ocean mixed layer processes, and sea ice dynamics. There are significant improvements in the sea ice thickness, polar radiation budgets, tropical sea surface temperatures, and cloud radiative effects. CCSM3 can produce stable climate simulations of millennial duration without ad hoc adjustments to the fluxes exchanged among the component models. Nonetheless, there are still systematic biases in the ocean–atmosphere fluxes in coastal regions west of continents, the spectrum of ENSO variability, the spatial distribution of precipitation in the tropical oceans, and continental precipitation and surface air temperatures. Work is under way to extend CCSM to a more accurate and comprehensive model of the earth's climate system.

Description: A new version of the Community Atmosphere Model (CAM) has been developed and released to the climate community. CAM Version 3 (CAM3) is an atmospheric general circulation model that includes the Community Land Model (CLM3), an optional slab ocean model, and a thermodynamic sea ice model. The dynamics and physics in CAM3 have been changed substantially compared to implementations in previous versions. CAM3 includes options for Eulerian spectral, semi-Lagrangian, and finite-volume formulations of the dynamical equations. It supports coupled simulations using either finite-volume or Eulerian dynamics through an explicit set of adjustable parameters governing the model time step, cloud parameterizations, and condensation processes. The model includes major modifications to the parameterizations of moist processes, radiation processes, and aerosols. These changes have improved several aspects of the simulated climate, including more realistic tropical tropopause temperatures, boreal winter land surface temperatures, surface insolation, and clear-sky surface radiation in polar regions. The variation of cloud radiative forcing during ENSO events exhibits much better agreement with satellite observations. Despite these improvements, several systematic biases reduce the fidelity of the simulations. These biases include underestimation of tropical variability, errors in tropical oceanic surface fluxes, underestimation of implied ocean heat transport in the Southern Hemisphere, excessive surface stress in the storm tracks, and offsets in the 500-mb height field and the Aleutian low.

Description: The climate sensitivity of the Community Climate System Model (CCSM) is described in terms of the equilibrium change in surface temperature due to a doubling of carbon dioxide in a slab ocean version of the Community Atmosphere Model (CAM) and the transient climate response, which is the surface temperature change at the point of doubling of carbon dioxide in a 1% yr−1 CO2 simulation with the fully coupled CCSM. For a fixed atmospheric horizontal resolution across model versions, we show that the equilibrium sensitivity has monotonically increased across CSM1.4, CCSM2, to CCSM3 from 2.01° to 2.27° to 2.47°C, respectively. The transient climate response for these versions is 1.44° to 1.09° to 1.48°C, respectively. Using climate feedback analysis, it is shown that both clear-sky and cloudy-sky processes have contributed to the changes in transient climate response. The dependence of these sensitivities on horizontal resolution is also explored. The equilibrium sensitivity of the high-resolution (T85) version of CCSM3 is 2.71°C, while the equilibrium response for the low-resolution model (T31) is 2.32°C. It is shown that the shortwave cloud response of the high-resolution version of the CCSM3 is anomalous compared to the low- and moderate-resolution versions.

Description: The role of direct radiative forcing of desert dust aerosol in the change from wet to dry climate observed in the African Sahel region in the last half of the twentieth century is investigated using simulations with an atmospheric general circulation model. The model simulations are conducted either forced by the observed sea surface temperature (SST) or coupled with the interactive SST using the Slab Ocean Model (SOM). The simulation model uses dust that is less absorbing in the solar wavelengths and has larger particle sizes than other simulation studies. As a result, simulations show less shortwave absorption within the atmosphere and larger longwave radiative forcing by dust. Simulations using SOM show reduced precipitation over the intertropical convergence zone (ITCZ) including the Sahel region and increased precipitation south of the ITCZ when dust radiative forcing is included. In SST-forced simulations, on the other hand, significant precipitation changes are restricted to over North Africa. These changes are considered to be due to the cooling of global tropical oceans as well as the cooling of the troposphere over North Africa in response to dust radiative forcing. The model simulation of dust cannot capture the magnitude of the observed increase of desert dust when allowing dust to respond to changes in simulated climate, even including changes in vegetation, similar to previous studies. If the model is forced to capture observed changes in desert dust, the direct radiative forcing by the increase of North African dust can explain up to 30% of the observed precipitation reduction in the Sahel between wet and dry periods. A large part of this effect comes through atmospheric forcing of dust, and dust forcing on the Atlantic Ocean SST appears to have a smaller impact. The changes in the North and South Atlantic SSTs may account for up to 50% of the Sahel precipitation reduction. Vegetation loss in the Sahel region may explain about 10% of the observed drying, but this effect is statistically insignificant because of the small number of years in the simulation. Greenhouse gas warming seems to have an impact to increase Sahel precipitation that is opposite to the observed change. Although the estimated values of impacts are likely to be model dependent, analyses suggest the importance of direct radiative forcing of dust and feedbacks in modulating Sahel precipitation.

Description: Recently available satellite observations from the Atmospheric Infrared Sounder (AIRS) are used to calculate relative humidity in the troposphere. The observations illustrate many scales of variability in the atmosphere from the seasonal overturning Hadley–Walker circulation to high-frequency transient variability associated with baroclinic storms with high vertical resolution. The Asian monsoon circulation has a strong impact on upper-tropospheric humidity, with large humidity gradients to the west of the monsoon. The vertical structure of humidity is generally bimodal, with high humidity in the upper and lower troposphere, and a dry middle troposphere. The highest variances in humidity are seen around the midlatitude tropopause. AIRS data are compared to a simulation from a state-of-the-art climate model. The model does a good job of reproducing the mean humidity distribution but is slightly moister than the observations in the middle and upper troposphere. The model has difficultly reproducing many scales of observed variability, particularly in the Tropics. Differences in humidity imply global differences in the top of atmosphere fluxes of ∼1 W m−2.

Description: Climate change scenario simulations with the Community Climate System Model version 3 (CCSM3), a global coupled climate model, show that if concentrations of all greenhouse gases (GHGs) could have been stabilized at the year 2000, the climate system would already be committed to 0.4°C more warming by the end of the twenty-first century. Committed sea level rise by 2100 is about an order of magnitude more, percentage-wise, compared to sea level rise simulated in the twentieth century. This increase in the model is produced only by thermal expansion of seawater, and does not take into account melt from ice sheets and glaciers, which could at least double that number. Several tenths of a degree of additional warming occurs in the model for the next 200 yr in the Intergovernmental Panel on Climate Change (IPCC) Special Report on Emissions Scenarios (SRES) B1 and A1B scenarios after stabilization in the year 2100, but with twice as much sea level rise after 100 yr, and doubling yet again in the next 100 yr to 2300. At the end of the twenty-first century, the warming in the tropical Pacific for the A2, A1B, and B1 scenarios resembles an El Niño–like response, likely due to cloud feedbacks in the model as shown in an earlier version. Greatest warming occurs at high northern latitudes and over continents. The monsoon regimes intensify somewhat in the future warmer climate, with decreases of sea level pressure at high latitudes and increases in the subtropics and parts of the midlatitudes. There is a weak summer midlatitude soil moisture drying in this model as documented in previous models. Sea ice distributions in both hemispheres are somewhat overextensive, but with about the right ice thickness at the end of the twentieth century. Future decreases in sea ice with global warming are proportional to the temperature response from the forcing scenarios, with the high forcing scenario, A2, producing an ice-free Arctic in summer by the year 2100.

Description: To aid in understanding the role that marine boundary layer (MBL) clouds play in climate and assist in improving their representations in general circulation models (GCMs), their long-term microphysical and macroscale characteristics are quantified using observations from the Moderate Resolution Imaging Spectroradiometer (MODIS) instrument aboard the National Aeronautics and Space Administration’s (NASA’s) Terra satellite. Six years of MODIS pixel-level cloud products are used from oceanic study regions off the west coasts of California, Peru, the Canary Islands, Angola, and Australia where these cloud types are common. Characterizations are given for their organization (macroscale structure), the associated microphysical properties, and the seasonal dependencies of their variations for scales consistent with the size of a GCM grid box (300 km × 300 km). MBL mesoscale structure is quantified using effective cloud diameter CD, which is introduced here as a simplified measure of bulk cloud organization; it is straightforward to compute and provides descriptive information beyond that offered by cloud fraction. The interrelationships of these characteristics are explored while considering the influences of the MBL state, such as the occurrence of drizzle. Several commonalities emerge for the five study regions. MBL clouds contain the best natural examples of plane-parallel clouds, but overcast clouds occur in only about 25% of the scenes, which emphasizes the importance of representing broken MBL cloud fields in climate models (that are subgrid scale). During the peak months of cloud occurrence, mesoscale organization (larger CD) increases such that the fractions of scenes characterized as “overcast” and “clumped” increase at the expense of the “scattered” scenes. Cloud liquid water path and visible optical depth usually trend strongly with CD, with the largest values occurring for scenes that are drizzling. However, considerable interregional differences exist in these trends, suggesting that different regression functionalities exist for each region. For peak versus off-peak months, the fraction of drizzling scenes (as a function of CD) are similar for California and Angola, which suggests that a single probability distribution function might be used for their drizzle occurrence in climate models. The patterns are strikingly opposite for Peru and Australia; thus, the contrasts among regions may offer a test bed for model simulations of MBL drizzle occurrence.

Description: A six-member ensemble of twentieth-century simulations with changes to only time-evolving global distributions of black carbon aerosols in a global coupled climate model is analyzed to study the effects of black carbon (BC) aerosols on the Indian monsoon. The BC aerosols act to increase lower-tropospheric heating over South Asia and reduce the amount of solar radiation reaching the surface during the dry season, as noted in previous studies. The increased meridional tropospheric temperature gradient in the premonsoon months of March–April–May (MAM), particularly between the elevated heat source of the Tibetan Plateau and areas to the south, contributes to enhanced precipitation over India in those months. With the onset of the monsoon, the reduced surface temperatures in the Bay of Bengal, Arabian Sea, and over India that extend to the Himalayas act to reduce monsoon rainfall over India itself, with some small increases over the Tibetan Plateau. Precipitation over China generally decreases due to the BC aerosol effects. There is a weakened latitudinal SST gradient resulting from BC aerosols in the model simulations as seen in the observations, and this is present in the multiple-forcings experiments with the Community Climate System Model, version 3 (CCSM3), which includes natural and anthropogenic forcings (including BC aerosols). The BC aerosols and consequent weakened latitudinal SST gradient in those experiments are associated with increased precipitation during MAM in northern India and over the Tibetan Plateau, with some decreased precipitation over southwest India, the Bay of Bengal, Burma, Thailand, and Malaysia, as seen in observations. During the summer monsoon season, the model experiments show that BC aerosols have likely contributed to observed decreasing precipitation trends over parts of India, Bangladesh, Burma, and Thailand. Analysis of single ensemble members from the multiple-forcings experiment suggests that the observed increasing precipitation trends over southern China appear to be associated with natural variability connected to surface temperature changes in the northwest Pacific.